Critical role of hydrogen for superconductivity in nickelates.

The newly discovered nickelate superconductors so far only exist in epitaxial thin films synthesized by a topotactic reaction with metal hydrides1. This method changes the nickelates from the perovskite to an infinite-layer structure by deintercalation of apical oxygens1-3. Such a chemical reaction may introduce hydrogen (H), influencing the physical properties of the end materials4-9. Unfortunately, H is insensitive to most characterization techniques and is difficult to detect because of its light weight. Here, in optimally Sr doped Nd0.8Sr0.2NiO2H epitaxial films, secondary-ion mass spectroscopy shows abundant H existing in the form of Nd0.8Sr0.2NiO2Hx (x ≅ 0.2-0.5). Zero resistivity is found within a very narrow H-doping window of 0.22 ≤ x ≤ 0.28, showing unequivocally the critical role of H in superconductivity. Resonant inelastic X-ray scattering demonstrates the existence of itinerant interstitial s (IIS) orbitals originating from apical oxygen deintercalation. Density functional theory calculations show that electronegative H- occupies the apical oxygen sites annihilating IIS orbitals, reducing the IIS-Ni 3d orbital hybridization. This leads the electronic structure of H-doped Nd0.8Sr0.2NiO2Hx to be more two-dimensional-like, which might be relevant for the observed superconductivity. We highlight that H is an important ingredient for superconductivity in epitaxial infinite-layer nickelates.

Sequential appetite suppression by oral and visceral feedback to the brainstem.

The termination of a meal is controlled by dedicated neural circuits in the caudal brainstem. A key challenge is to understand how these circuits transform the sensory signals generated during feeding into dynamic control of behaviour. The caudal nucleus of the solitary tract (cNTS) is the first site in the brain where many meal-related signals are sensed and integrated1-4, but how the cNTS processes ingestive feedback during behaviour is unknown. Here we describe how prolactin-releasing hormone (PRLH) and GCG neurons, two principal cNTS cell types that promote non-aversive satiety, are regulated during ingestion. PRLH neurons showed sustained activation by visceral feedback when nutrients were infused into the stomach, but these sustained responses were substantially reduced during oral consumption. Instead, PRLH neurons shifted to a phasic activity pattern that was time-locked to ingestion and linked to the taste of food. Optogenetic manipulations revealed that PRLH neurons control the duration of seconds-timescale feeding bursts, revealing a mechanism by which orosensory signals feed back to restrain the pace of ingestion. By contrast, GCG neurons were activated by mechanical feedback from the gut, tracked the amount of food consumed and promoted satiety that lasted for tens of minutes. These findings reveal that sequential negative feedback signals from the mouth and gut engage distinct circuits in the caudal brainstem, which in turn control elements of feeding behaviour operating on short and long timescales.

Conformation-driven strategy for resilient and functional protein materials.

The exceptional elastic resilience of some protein materials underlies essential biomechanical functions with broad interest in biomedical fields. However, molecular design of elastic resilience is restricted to amino acid sequences of a handful of naturally occurring resilient proteins such as resilin and elastin. Here, we exploit non-resilin/elastin sequences that adopt kinetically stabilized, random coil-dominated conformations to achieve near-perfect resilience comparable with that of resilin and elastin. We also show a direct correlation between resilience and Raman-characterized protein conformations. Furthermore, we demonstrate that metastable conformation of proteins enables the construction of mechanically graded protein materials that exhibit spatially controlled conformations and resilience. These results offer insights into molecular mechanisms of protein elastomers and outline a general conformation-driven strategy for developing resilient and functional protein materials.

Cloning, Expression, Purification, and Characterization of Lactate Dehydrogenase from Plasmodium knowlesi: A Zoonotic Malaria Parasite.

Plasmodium knowlesi is the only Plasmodium that causes zoonotic disease among the Plasmodium that cause infection in humans. It is fatal due to its short asexual growth cycle within 24 h. Lactate dehydrogenase (LDH), an enzyme that catalyzes the final step of glycolysis, is a biomarker for diagnosing infection by Plasmodium spp. parasite. Therefore, this study aimed to efficiently produce the soluble form of P. knowlesi LDH (PkLDH) using a bacterial expression system for studying malaria caused by P. knowlesi. Recombinant pET-21a(+)-PkLDH plasmid was constructed by inserting the PkLDH gene into a pET-21a(+) expression vector. Subsequently, the recombinant plasmid was inserted into the protein-expressing Escherichia coli Rosetta(DE3) strain, and the optimal conditions for overexpression of the PkLDH protein were established using this strain. We obtained a yield of 52.0 mg/L PkLDH from the Rosetta(DE3) strain and confirmed an activity of 483.9 U/mg through experiments. This methodology for high-efficiency PkLDH production can be utilized for the development of diagnostic methods and drug candidates for distinguishing malaria caused by P. knowlesi.

Risk of newly developed atrial fibrillation by alcohol consumption differs according to genetic predisposition to alcohol metabolism: a large-scale cohort study with UK Biobank.

BACKGROUND: The predictive relationship between mild-to-moderate alcohol consumption and the risk of incident atrial fibrillation (AF) remains controversial. OBJECTIVE: We investigated whether the relationship between alcohol consumption and the risk of incident AF could be associated with the genetic predisposition to alcohol metabolism. METHODS: A total of 399,329 subjects with genetic data from the UK Biobank database, enrolled between 2006 and 2010, were identified and followed for incident AF until 2021. Genetic predisposition to alcohol metabolism was stratified according to the polygenic risk score (PRS) tertiles. Alcohol consumption was categorized as non-drinkers, mild-to-moderate drinkers (< 30 g/day), and heavy drinkers (≥ 30 g/day). RESULTS: During the follow-up (median 12.2 years), 19,237 cases of AF occurred. When stratified by PRS tertiles, there was a significant relationship between genetic predisposition to alcohol metabolism and actual alcohol consumption habits (P < 0.001). Mild-to-moderate drinkers showed a decreased risk of AF (HR 0.96, 95% CI 0.92-0.99), and heavy drinkers showed an increased risk of AF (HR 1.06, 95% CI 1.02-1.10) compared to non-drinkers. When stratified according to PRS tertiles for genetic predisposition to alcohol metabolism, mild-to-moderate drinkers had equivalent AF risks, and heavy drinkers showed increased AF risk in the low PRS tertile group. However, mild-to-moderate drinkers had decreased AF risks and heavy drinkers showed similar risks of AF in the middle/high PRS tertile groups. CONCLUSIONS: Differential associations between alcohol consumption habits and incident AF across genetic predisposition to alcohol metabolism were observed; individuals with genetic predisposition to low alcohol metabolism were more susceptible to AF.

Charge density waves in infinite-layer NdNiO2 nickelates.

In materials science, much effort has been devoted to the reproduction of superconductivity in chemical compositions, analogous to cuprate superconductors since their discovery over 30 years ago. This approach was recently successful in realising superconductivity in infinite-layer nickelates1-6. Although differing from cuprates in electronic and magnetic properties, strong Coulomb interactions suggest that infinite-layer nickelates have a propensity towards various symmetry-breaking orders that populate cuprates7-10. Here we report the observation of charge density waves (CDWs) in infinite-layer NdNiO2 films using Ni L3 resonant X-ray scattering. Remarkably, CDWs form in Nd 5d and Ni 3d orbitals at the same commensurate wavevector (0.333, 0) reciprocal lattice units, with non-negligible out-of-plane dependence and an in-plane correlation length of up to ~60 Å. Spectroscopic studies reveal a strong connection between CDWs and Nd 5d-Ni 3d orbital hybridization. Upon entering the superconducting state at 20% Sr doping, the CDWs disappear. Our work demonstrates the existence of CDWs in infinite-layer nickelates with a multiorbital character distinct from cuprates, which establishes their low-energy physics.

Expression, Purification, and Characterization of Plasmodium vivax Lactate Dehydrogenase from Bacteria without Codon Optimization.

Plasmodium vivax is the most widespread cause of malaria, especially in subtropical and temperate regions such as Asia-Pacific and America. P. vivax lactate dehydrogenase (PvLDH), an essential enzyme in the glycolytic pathway, is required for the development and reproduction of the parasite. Thus, LDH from these parasites has garnered attention as a diagnostic biomarker for malaria and as a potential molecular target for developing antimalarial drugs. In this study, we prepared a transformed Escherichia coli strain for the overexpression of PvLDH without codon optimization. We introduced this recombinant plasmid DNA prepared by insertion of the PvLDH gene in the pET-21a(+) expression vector, into the Rosetta(DE3), an E. coli strain suitable for eukaryotic protein expression. The time, temperature, and inducer concentration for PvLDH expression from this E. coli Rosetta(DE3), containing the original PvLDH gene, were optimized. We obtained PvLDH with a 31.0 mg/L yield and high purity (>95%) from this Rosetta(DE3) strain. The purified protein was characterized structurally and functionally. The PvLDH expressed and purified from transformed bacteria without codon optimization was successfully demonstrated to exhibit its potential tetramer structure and enzyme activity. These findings are expected to provide valuable insights for research on infectious diseases, metabolism, diagnostics, and therapeutics for malaria caused by P. vivax.

SOXE group transcription factors regulates the expression of FoxG1 during inner ear development.

The transcription factor FOXG1 plays an important role in inner ear development; however, the cis-regulatory mechanisms controlling the inner-ear-specific expression of FOXG1 are poorly understood. In this study, we aimed to identify the element that specifically regulates FoxG1 expression in the otic vesicle, which develops into the inner ear, through comparative genome analysis between vertebrate species and chromatin immunoprecipitation. The cis-regulatory element (E2) identified showed high evolutionary conservation among vertebrates in the genomic DNA of FoxG1 spanning approximately 3 Mbp. We identified core sequences important for the activity of the otic-vesicle-specific enhancer through in vitro and in vivo reporter assays for various E2 enhancer mutants and determined the consensus sequence for SOX DNA binding. In addition, SoxE, a subfamily of the Sox family, was simultaneously expressed in the otic vesicles of developing embryos and showed a similar protein expression pattern as that of FoxG1. Furthermore, SOXE transcription factors induced specific transcriptional activity through the FoxG1 Otic enhancer (E2b). These findings suggest that the interaction between the otic enhancer of FoxG1 and SOXE transcription factor, in which the otic expression of FoxG1 is evolutionarily well-conserved, is important during early development of the inner ear, a sensory organ important for survival in nature.

Clozapine Blood Concentration Predicts Corrected QT-Interval Prolongation in Patients With Psychoses.

BACKGROUND: Corrected QT-interval (QTc) prolongation (QTP) is a rare but fatal adverse effect of antipsychotics. Clozapine is the only antipsychotic recommended for treatment of resistant schizophrenia; however, clozapine has been reported to cause QTP. We sought factors predictive of QTP in patients who had antipsychotic polypharmacy involving clozapine. We explored whether the clozapine blood concentration might predict QTP. METHODS: We included 133 patients with schizophrenia spectrum disorder who had antipsychotic polypharmacy involving clozapine. We used the χ2 and nonparametric tests to compare clozapine therapeutic drug monitoring (TDM) values and QTc-prolonged person (QTPP) status. Multivariate regression and mediator models were used to identify risk factors for QTPP status and QTP. RESULTS: In total, 111 patients were prescribed clozapine. The QTPP rates were 31.3% (20) for men and 23.2% (16) for women. Compared with the non-QTPP group, the QTPP group exhibited significantly higher daily dose of all antipsychotics including clozapine, a higher clozapine dose, and elevated clozapine and norclozapine TDM values. Furthermore, such patients were prescribed a greater number of antipsychotics. Multivariate logistic regression revealed that only the clozapine TDM value could be predictive factor for QTPP status (P = 0.018). A clozapine TDM value above the therapeutic range (>600 mg/dL) was associated with a high risk of QTPP status (adjusted odds ratio, 6.5; 95% confidence interval, 1.7-25.2; P = 0.006). The mediator model revealed that the clozapine TDM values completely mediated the association between the clozapine dose and the QTc interval. CONCLUSIONS: The clozapine blood concentration reliably predicts QTP in patients with clozapine use.

Clinical evaluation of the fit of lithium disilicate crowns fabricated with three different CAD-CAM systems.

STATEMENT OF PROBLEM: The fit and performance of prostheses fabricated using various computer-aided design and computer-aided manufacturing (CAD-CAM) systems have been evaluated. However, most studies were conducted in vitro, and relatively few have addressed gingival parameters and prosthesis fit under clinical conditions. PURPOSE: This clinical study aimed to compare the fit of lithium disilicate crowns produced using 3 CAD-CAM systems and evaluate clinical results up to 6 months after delivery. MATERIAL AND METHODS: Forty participants requiring a single crown were recruited. Three monolithic lithium disilicate crowns were fabricated per participant by using 3 different CAD-CAM systems (intraoral scanners, CAD software, and milling machines): CEREC group (CEREC Bluecam, CEREC AC, CEREC MC); EZIS group (EZIS PO, EZIS VR, EZIS HM); and TRIOS group (TRIOS 3, EXO-CAD, ARUM-4X). The fit of the prostheses was assessed via a silicone replica technique, and the most acceptable crown was delivered; 12 were selected from the CEREC group, 16 from the EZIS group, and 12 from the TRIOS group. Follow-up clinical examinations were performed at 1, 3, and 6 months after delivery. The Kruskal-Wallis test with the post hoc Mann-Whitney U test was conducted to analyze significant differences in crown fit and periodontal conditions among the groups (α=.05). RESULTS: The marginal gap of the CEREC group was significantly higher than that of the EZIS group, and the occlusal gap of the EZIS group was significantly lower than those of the CEREC and TRIOS groups (P<.05). Probing depth, bleeding index, and plaque index showed no intergroup differences at 6 months (P>.05). CONCLUSIONS: The lithium disilicate crowns of all groups showed clinically acceptable fit. No significant differences were found among the groups in terms of periodontal conditions after 6 months.

Spatially Modulated Superfluid State in Two-Dimensional

The second layer of ^{4}He films adsorbed on a graphite substrate is an excellent experimental platform to study the interplay between superfluid and structural orders. Here, we report a rigid two-frequency torsional oscillator study on the second layer as a function of temperature and ^{4}He atomic density. For the first time, we show experimentally that the superfluid density is independent of frequency, which can be interpreted as unequivocal evidence of genuine superfluidity. The phase diagram established in this work reveals that a superfluid phase coexists with hexatic density-wave correlation and a registered solid phase. This suggests the second layer as a candidate for hosting two exotic quantum ground states: the spatially modulated superfluid and supersolid phases resulting from the interplay between superfluid and structural orders.

Silk Hydrogels with Controllable Formation of Dityrosine, 3,4-Dihydroxyphenylalanine, and 3,4-Dihydroxyphenylalanine-Fe3+ Complexes through Chitosan Particle-Assisted Fenton Reactions.

The oxidation of tyrosine residues of silk fibroin involves the generation of dityrosine and 3,4-dihydroxyphenylalanine (DOPA). However, it remains a challenge to selectively control the reaction pathway to produce dityrosine or DOPA in a selective fashion. Here, silk hydrogels with controllable formation of not only dityrosine and DOPA but also DOPA-Fe3+ complexes within the cross-linked networks were developed. The use of chitosan particles in the Fenton reaction allowed the interaction of Fe3+ ions with silk fibroin to be limited through the adsorption of Fe3+ ions onto chitosan particles by manipulating contact time between the reaction medium and chitosan particles. This led to significant suppression of the premature formation of ß-sheet structures that cause steric hindrance to the collisions between tyrosyl radicals and thus enabled higher selectivity toward the formation of dityrosine than DOPA. Remarkably, the addition of ethylenediaminetetraacetic acid (EDTA) to the chitosan particle-assisted Fenton reactions resulted in hydrogels that significantly favored the formation of DOPA over dityrosine due to the increase in the hydroxylation of phenol in the presence of EDTA. Despite the existence of Fe3+-EDTA complexes, Raman spectra indicated the DOPA-Fe3+ complexation in the hydrogels. Mechanistically, the hydrogel networks with small-sized and uniformly distributed ß-sheet structures as well as the abundance of DOPA appear to make non-EDTA-chelated Fe3+ ions more accessible to complexation with DOPA. These findings have important implications for understanding the oxidation of tyrosine residues of silk fibroin by metal-catalyzed oxidation systems with potential benefits for future studies on silk protein-based hydrogels capable of generating intrinsic adhesive features as well as for exploring dual-cross-linked silk hydrogels constructed by chemical cross-linking and metal-coordinate complexation.

Dietary patterns and smartphone use in adolescents in Korea: A nationally representative cross-sectional study.

BACKGROUND AND OBJECTIVES: Diet and smartphone use are daily routines that can affect adolescents' mental health. This study investigated whether the frequency of the consumption of certain foods is associated with the duration of smartphone use and problems caused by smartphone overuse in adolescents. METHODS AND STUDY DESIGN: Food consumption and smartphone use were investigated in 62,276 Korean adolescents aged 12-18 years by using a nationwide self-report survey. Food intake was assessed on a seven-point scale ("never" to "1, 2, and 3 or more times per day") for nine items: fruits, vegetables, milk, soda, energy drinks, sweetened beverages, fast food, instant noodles, and snacks. The durations of smartphone use and problematic use were determined using self-report items. RESULTS: Most respondents (66.5%) used smartphones over 2 hours per day. Higher consumption levels of fruits (F=151.8; p<0.001), vegetables (F=119.9; p<0.001), and milk (F=33.0; p<0.001) were associated with significantly lower smartphone usage, whereas higher consumption levels of soda (F=292.5; p<0.001), energy drinks (F=24.0; p<0.001), sweetened beverages (F=224.8; p<0.001), fast food (F=192.1; p<0.001), instant noodles (F=196.2; p<0.001), and snacks (F=131.6; p<0.001) were positively associated with higher smartphone usage. CONCLUSIONS: Our findings provide useful clinical information regarding the association between dietary habits and smartphone use in adolescents. Future studies should investigate underlying mechanisms and examine the efficacy of dietary interventions for adolescents with excessive smartphone use.

Electrolyte-Dependent Sodium Ion Transport Behaviors in Hard Carbon Anode.

A comprehensive study is conducted on hard carbon (HC) series samples by tuning the graphitic local microstructures systematically as an anode for SIBs in both carbonate- (CBE) and glyme-based electrolytes (GBE). The results reveal more detailed charge storage characters of HCs on the LVP section. 1) The LVP capacity is closely related to the prismatic surface area to the basal plane as well as the bulk density, regardless of electrolyte systems. 2) The glyme-sodium ion complex can facilitate sodium ion delivery into the internal closed pores of the HCs along with not well-ordered graphitic structures. 3) The glyme-mediated sodium ion-storage behavior causes significant decreases in both surface film resistance and charge transfer resistance, leading to enhanced rate capability. 4) The LVP originates from the formation of pseudo-metallic sodium nanoclusters, which are the same in a CBE and GBE. These results provide insight into the sodium ion-storage behaviors of HCs, particularly on the interrelationship between graphitic local microstructures and electrolyte systems. In addition, a high-performance HC anode with a plateau capacity of ≈300 mA h g-1 is designed based on the information, and its workability is demonstrated in a full-cell SIB device.

Nanoparticulate Conjugated Microporous Polymer with Post-Modified Benzils for Enhanced Pseudocapacitor Performance.

Conjugated microporous polymer (CMP)-based energy-storage materials were developed for pseudocapacitors. Nanoparticulate CMP (N-CMP) with an average diameter of 41±4 nm was prepared through kinetic growth control in the Sonogashira coupling of 1,3,5-triethynylbenzene with 1,4-diiodobenzene. The N-CMP is rich in a diphenylacetylene moiety in its chemical structure. Through the FeCl3 -catalyzed oxidation of diphenylacetylene moieties, N-CMP with benzil moieties (N-CMP-BZ) was prepared and showed enhanced electrochemical performance as an electrode material of pseudocapacitors, compared with CMP, CMP-BZ, and N-CMP. In model studies, the benzil was redox active and showed two-electron reduction behavior. The excellent electrochemical performance of N-CMP-BZ is attributable to the enhanced utilization of functional sites by a nanosize effect and the additional redox contribution of benzil moieties.

Fabrication of Poly(ethylene terephthalate) Fiber@Microporous Organic Polymer with Amino Groups@Cu Films for Flexible and Metal-Economical Electromagnetic Interference Shielding Materials.

Flexible and metal-economical electromagnetic interference (EMI) shielding films were fabricated based on microporous organic polymer (MOP) chemistry. MOP with amino groups (MOP-A) could be introduced to the surface of poly(ethylene terephthalate) (PET) fibers. Due to the microporosity and amino groups of MOP-A, Ag+ could be easily incorporated into PET@MOP-A. Through Ag-catalyzed electroless Cu deposition, PET@MOP-A@Cu films were fabricated. The morphological and chemical structures of the PET@MOP-A@Cu were characterized by scanning electron microscopy, X-ray diffraction studies, and X-ray photoelectron spectroscopy. Among the films, the PET@MOP-A@Cu-40 with 41 wt % Cu (a thickness of 0.64 µm) showed excellent EMI shielding performance with 64.3-73.8 dB against an EM of 8-12 GHz. Moreover, it showed retention of the original EMI shielding performance against 1000 bending (R = 5 mm) tests.

Non-structural protein 1 from Japanese encephalitis virus expressed in E. coli retains its molecular weight and immunogenicity.

Japanese encephalitis virus (JEV) is a member of the Flavivirus genus and has recently attracted attention as a high-risk pathogen in the Asia-Pacific region, with up to 30% mortality in the afflicted patients. Recent outbreaks of flavivirus-associated infections around the world have put the focus on non-structural protein 1 (NS1) as a candidate for diagnostic and vaccine researches on flaviviruses. Although the JEV NS1 protein has been expressed in eukaryotic cells, attempts to express JEV NS1 in E. coli are on due to advantages such as rapid growth, easy manipulation, low cost, and high yield. However, the challenges of low yield and poor solubility of the proteins expressed in E. coli remain to be overcome. Herein, we reported successful expression of the JEV NS1 protein in E. coli Rosetta(DE3) strain. We standardized the temperature, induction time, as well as the concentration of the inducer for optimizing the expression of JEV NS1 in E. coli. Further, we successfully obtained soluble JEV NS1 from inclusion bodies by partial refolding during elution and gradual refolding during dialysis. Furthermore, the JEV NS1 protein was found to retain its molecular weight and was able to induce an immune response in the mouse. Western blot and indirect enzyme-linked immunosorbent assay were performed using the blood of the immunized mouse and purified JEV NS1 in this study. Hence, JEV NS1 expressed in and isolated from E. coli Rosetta(DE3) strain holds potential for application in vaccine development and diagnostic studies to combat Japanese encephalitis outbreaks in the future.

Analysis of deoxyribonuclease activity by conjugation-free fluorescence polarisation in sub-nanolitre droplets.

We report the analysis of deoxyribonuclease (DNase) activity by conjugation-free fluorescence polarisation in a droplet-based microfluidic chip. DNase is a DNA cleaving enzyme and its activity is important in the maintenance of normal cellular functions. Alterations in DNase activity have been implicated as the cause of various cancers and autoimmune diseases. To date, various methods for the analysis of DNase activity have been reported. However, they are not cost effective due to the requirement of large sample volumes and the need for the conjugation of fluorescent dyes. In this study, we have used ethidium bromide (EtBr), a DNA intercalating reagent, as a fluorescent reporter without any prior conjugation or modification of DNA. Degradation of DNA by DNase 1 was monitored at a steady state by making changes in the fluorescence polarisation of EtBr in droplets with a volume of 330 picolitre at a 40 hertz frequency under visible light. Using this technique, we successfully determined the half-maximal inhibitory concentration (IC50) of ethylenediaminetetraacetic acid (EDTA) for the inhibition of DNase 1 activity to be 1.56 ± 0.91 mM.

Interaction between lead and noradrenergic genotypes affects neurocognitive functions in attention-deficit/hyperactivity disorder: a case control study.

BACKGROUND: Lead is known to be associated with attention-deficit/hyperactivity disorder (ADHD) even at low concentrations. We aimed to evaluate neurocognitive functions associated with lead in the blood and the interactions between lead and dopaminergic or noradrenergic pathway-related genotypes in youths with ADHD. METHODS: A total of 259 youths with ADHD and 96 healthy controls (aged 5-18 years) enrolled in this study. The Korean Kiddie Schedule for Affective Disorders and Schizophrenia-Present and Lifetime version was conducted for psychiatric diagnostic evaluation. Blood lead levels were measured, and their interaction with dopaminergic or noradrenergic genotypes for ADHD; namely, the dopamine transporter (DAT1), dopamine receptor D4 (DRD4), and alpha-2A-adrenergic receptor (ADRA2A) genotypes were investigated. All participants were assessed using the ADHD Rating Scale-IV (ADHD-RS). Participants also completed the continuous performance test (CPT) and Stroop Color-Word Test (SCWT). Analysis of covariance was used for comparison of blood lead levels between ADHD and control groups. A multivariable linear regression model was used to evaluate the associations of blood lead levels with the results of ADHD-RS, CPT, and SCWT; adjusted for intelligence quotient (IQ), age, and sex. A path analysis model was used to identify the mediating effects of neurocognitive functions on the effects of blood lead on ADHD symptoms. To evaluate the effect of the interaction between blood lead and genes on neuropsychological functions, hierarchical regression analyses were performed. RESULTS: There was a significant difference in blood lead levels between the ADHD and control groups (1.4 ± 0.5 vs. 1.3 ± 0.5 µg/dL, p = .005). Blood lead levels showed a positive correlation with scores on omission errors(r = .158, p = .003) and response time variability (r = .136, p = .010) of CPT. In the multivariable linear regression model, blood lead levels were associated with omission errors (B = 3.748, p = .045). Regarding the effects of lead on ADHD symptoms, hyperactivity-impulsivity was mediated by omission errors. An interaction effect was detected between ADRA2A DraI genotype and lead levels on omission errors (B = 5.066, p = .041). CONCLUSIONS: Our results indicate that neurocognitive functions at least partly mediate the association between blood lead levels and ADHD symptoms, and that neurocognitive functions are affected by the interaction between blood lead levels and noradrenergic genotype.

Compliant Underwater Manipulator with Integrated Tactile Sensor for Nonlinear Force Feedback Control of an SMA Actuation System.

Design, sensing, and control of underwater gripping systems remain challenges for soft robotic manipulators. Our study investigates these critical issues by designing a shape memory alloy (SMA) actuation system for a soft robotic finger with a directly 3D-printed stretchable skin-like tactile sensor. SMA actuators were thermomechanically trained to assume a curved finger-like shape when Joule heated, and the flexible multi-layered tactile sensor was directly 3D-printed onto the surface of the fingertip. A nonlinear controller was developed to enable precise fingertip force control using feedback from the compliant tactile sensor. Underwater experiments were conducted using closed-loop force feedback from the directly 3D-printed tactile sensor with the SMA actuators, showing satisfactory force tracking ability. Furthermore, a 3D finite element model was developed to more deeply understand the shape memory thermal-fluidic-structural multi-physics simulation of the manipulator underwater. An application for human control via electromyogram (EMG) signals also demonstrated an intuitive way for a person to operate the submerged robotic finger. Together, these results suggested that the soft robotic finger could be used to carefully manipulate fragile objects underwater.