Real-World Three-Year Clinical Outcomes of Biolimus-Eluting Stents versus Other Contemporary Drug-Eluting Stents in Patients with Acute Myocardial Infarction Patients: Data from the Korea Acute Myocardial Infarction Registry (KAMIR).

INTRODUCTION: Biolimus-eluting stents (BES) are known to be superior to bare-metal stents. This study aims to evaluate the safety and efficacy of BES compared to other drug-eluting stents (DES) based on big data from the Korea Acute Myocardial Infarction Registry (KAMIR). METHODS: The study analyzed a total of 9,759 acute myocardial infarction (AMI) patients who underwent percutaneous coronary intervention (PCI) with DES. Total death, cardiac death, recurrent MI, revascularization, stent thrombosis, target lesion failure (TLF, composite of cardiac death, recurrent myocardial infarction (MI), and target lesion revascularization), and major adverse cardiac events (MACE, composite of total death, recurrent MI, and revascularization) were analyzed in patients with AMI up to three years. Study populations were divided into BES (n = 2,020), everolimus-eluting stents (EES, n = 5,293), and zotarolimus-eluting stents (ZES, n = 2,446) groups. RESULTS: To adjust baseline potential confounders, an inverse probability weighting (IPTW) analysis was performed. After IPTW, at three years, total death (7.2%, 8.6%, and 9.5%, P < 0.001), cardiac death (4.1%, 5.3%, and 6.6%, P < 0.001), recurrent MI (1.6%, 2.6%, and 3.2%, P < 0.001), TLF (6.5%, 8.1%, and 9.1%, P < 0.001), and MACE (15.8%, 17.5%, and 18.2%, P < 0.001) were lowest in the BES group compared with the other DES groups in AMI patients. During the 3-year clinical follow-up, the BES group showed better outcomes of MACE (hazard ratio (HR), 0.773; 95% confidence interval (CI), 0.676-0.884; P < 0.001), TLF (HR, 0.659; 95% CI, 0.538-0.808; P < 0.001), total death (HR, 0.687; 95% CI, 0.566-0.835; P < 0.001), and cardiac death (HR,0.593; 95% CI, 0.462-0.541; P < 0.001) than the EES groups. CONCLUSIONS: In this study, BES was superior to EES or ZES in reducing total death, cardiac death, TLF, and MACE in AMI patients.

Super-Hydrophobic Properties of Aluminum Surfaces Synthesized by a Two-Step Chemical Etching Process.

In this study, super-hydrophobic coatings on Al surfaces were prepared by a two-step chemical etching process using potassium hydroxide and lauric acid as the etching solution and coating solution, respectively. The Al surface was roughened by immersion in potassium hydroxide, and an ethanolic solution of lauric acid was then coated onto the rough Al surface to lower the surface energy. The wettability and surface morphologies of the treated Al surfaces were characterized using contact angle measurement and scanning electron microscopy, respectively. Microstructures were formed on the treated Al surfaces, which increased the contact angle of the surface (>150°). The contact angle hysteresis was measured between 2.7° and 3° on average, indicating that the surface energy of the Al substrate was low, and the lauric acid was uniformly coated on the substrate. This super-hydrophobic coating showed excellent self-cleaning and corrosion-resistant behavior. The coated samples floated on the water surface and demonstrated excellent water repellent properties. In addition, the coatings were mechanically stable and had an excellent regeneration ability, as verified experimentally. The lauric acid used to lower the surface energy is considered more environment-friendly and more durable than the widely used polytetrafluoroethylene (PTFE).

Preparation and Characterization of the Sputtered TiAlN Coatings Using a Ti-Al Alloy Metal Target.

Titanium aluminium nitride (TiAlN) ternary coatings were deposited on glass substrates by means of reactive magnetron sputtering technique, using a Ti-Al alloy metal target (Ti0.5Al0.5). The depositions were performed at various N2 and Ar flux ratios of N2/(Ar + N2) ═ 33, 50, 67, 83%. The structure, morphology, chemical composition and mechanical properties were investigated by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), energy dispersive X-ray spectroscopy (EDS), and nano indenter (MTS System), respectively. The orientation of coatings depends on the flux ratios of N2/(Ar + N2) and substrate temperature. The coatings deposited with N2/(Ar + N2) ratios of 33, 50 at.% consists of pyramid-like column grains separated by porous and voids, which can be attributed to cubic-TiN (220) preferred orientation. The coatings deposited with N2/(Ar + N2) greater than 67% exhibits the phase of hexagonal-AlN and cubic-TiN. The surface of coatings becomes more compact and smoother with the N2/(Ar + N2) ratios increase. The coatings deposited with N2/(Ar+N2) ratio of 83% shows the largest hardness of 21.5 GPa, which is attributed to the preferred (200) orientation. However, this hardness increases significantly with increasing substrate temperature. The coatings deposited at more than 100 °C exhibited the (111) and/or (200) orientation. The amounts of grains grown along the (111) and (200) orientations play a significant role on the mechanical performance of TiAlN coatings. Four independent mechanisms, such as TiAlN stoichiometry and lattice parameter, the (111) preferred growth orientation, and the density increases (elimination of void), were found to contribute to the enhancement of TiAlN mechanical performance.

Prospective randomized comparison of clinical and angiographic outcomes between everolimus-eluting vs. zotarolimus-eluting stents for treatment of coronary restenosis in drug-eluting stents: intravascular ultrasound volumetric analysis (RESTENT-ISR trial).

AIMS: At present no proven standard treatment for drug-eluting stent (DES) restenosis is available, and the efficacy and safety of everolimus-eluting stent (EES) and zotarolimus-eluting stent (ZES) for DES restenosis are limited. The purpose of this prospective, randomized 9-month intracoronary ultrasound (IVUS) and 3-year clinical follow-up study was to compare the effects of EESs and ZESs on neointima volume and major adverse cardiovascular events (MACEs) such as death, myocardial infarction (MI), target lesion revascularization (TLR) and stent thrombosis in DES restenosis patients. METHODS AND RESULTS: Patients were eligible for this study if they were between 40 and 75 years old with in-stent restenosis >50% by quantitative coronary angiographic analysis in DES or within 5 mm of the stent edges with signs of ischaemia. Eligible patients (n = 304, 146 women and 158 men) were randomly assigned to receive either EES (158 patients) or ZES (146 patients). The primary endpoint of the study was to compare neointima volume between the EES and ZES groups at the 9-month follow-up IVUS. MACEs, including death, non-fatal MI, stent thrombosis and the need for repeated TLR within 3 years, were noted. The 9-month angiographic and IVUS follow-up showed no significant differences in late lumen loss (0.40 ± 0.56 vs. 0.45 ± 0.61 mm, P = 0.57, respectively) and neointima volume (0.51 ± 0.48 vs. 0.56 ± 0.54 mm3/1 mm, P = 0.47, respectively) in the EES and the ZES groups. Composite MACEs such as death, MI, stent thrombosis and TLR during 3-year follow-up were comparable between the two groups [15.8% (n = 25) in the EES group and 22.6% (n = 33) in the ZES group, P = 0.276], independent of de novo DES type, sex, age, body mass index, presence of diabetes, hypertension and dyslipidaemia. CONCLUSIONS: Patients with first- and second-generation DES restenosis, both EES and ZES implantation were effective and safe in reducing neointima volume and late loss with a comparable rate of MACEs independent of cardiovascular risk factors.

Nonstructural 5A Protein of Hepatitis C Virus Regulates Soluble Resistance-Related Calcium-Binding Protein Activity for Viral Propagation.

UNLABELLED: Hepatitis C virus (HCV) is a major cause of chronic liver disease and is highly dependent on cellular proteins for virus propagation. To identify the cellular factors involved in HCV propagation, we recently performed protein microarray assays using the HCV nonstructural 5A (NS5A) protein as a probe. Of 90 cellular protein candidates, we selected the soluble resistance-related calcium-binding protein (sorcin) for further characterization. Sorcin is a calcium-binding protein and is highly expressed in certain cancer cells. We verified that NS5A interacted with sorcin through domain I of NS5A, and phosphorylation of the threonine residue 155 of sorcin played a crucial role in protein interaction. Small interfering RNA (siRNA)-mediated knockdown of sorcin impaired HCV propagation. Silencing of sorcin expression resulted in a decrease of HCV assembly without affecting HCV RNA and protein levels. We further demonstrated that polo-like kinase 1 (PLK1)-mediated phosphorylation of sorcin was increased by NS5A. We showed that both phosphorylation and calcium-binding activity of sorcin were required for HCV propagation. These data indicate that HCV modulates sorcin activity via NS5A protein for its own propagation. IMPORTANCE: Sorcin is a calcium-binding protein and regulates intracellular calcium homeostasis. HCV NS5A interacts with sorcin, and phosphorylation of sorcin is required for protein interaction. Gene silencing of sorcin impaired HCV propagation at the assembly step of the HCV life cycle. Sorcin is phosphorylated by PLK1 via protein interaction. We showed that sorcin interacted with both NS5A and PLK1, and PLK1-mediated phosphorylation of sorcin was increased by NS5A. Moreover, calcium-binding activity of sorcin played a crucial role in HCV propagation. These data provide evidence that HCV regulates host calcium metabolism for virus propagation, and thus manipulation of sorcin activity may represent a novel therapeutic target for HCV.

Changes in Right Ventricular Volume and Function After Tricuspid Valve Surgery　- Tricuspid Annuloplasty vs. Tricuspid Valve Replacement.

BACKGROUND: There is a concern that clinical outcome of tricuspid valve replacement (TVR) is inferior compared with tricuspid annuloplasty (TAP). The aim of this study was therefore to compare changes in right ventricular (RV) volume and function following TAP with that following TVR on cardiac magnetic resonance imaging (CMR) in patients with severe functional tricuspid regurgitation (TR). METHODS AND RESULTS: Forty patients who underwent surgery for severe functional TR and who underwent CMR preoperatively and on postoperative follow-up (24.8±13.3 months after surgery) were enrolled. Thirteen patients underwent TAP (TAP group) and 27 patients underwent TVR (TVR group). Both RV end-diastolic and end-systolic volume indices decreased significantly after surgery (from 178.9±53.9 to 116.3±26.7 ml/m(2), P<0.001, and from 95.7±36.1 to 67.3±28.0 ml/m(2), P<0.001, respectively), without intergroup differences. In the TAP group, RV ejection fraction (EF) was preserved following surgery (from 43.3±9.5 to 46.9±10.9%, P=0.312). In the TVR group, however, it decreased significantly following surgery (from 51.8±9.2 to 42.4±12.3%, P<0.001). In addition, postoperative RVEF was lower in the TVR than TAP group, with a marginal significance (mean difference, -6.967; 95% confidence interval: -14.529 to 0.595; P=0.070). CONCLUSIONS: For patients with severe functional TR, both TAP and TVR are beneficial for reduction of RV volume indices. TAP, however, might be superior to TVR, because RVEF is well preserved following surgery. (Circ J 2016; 80: 1142-1147).

Quantitative Topic Analysis of Materials Science Literature Using Natural Language Processing.

Materials science research has garnered extensive attention from industry, society, policy, and academia. However, understanding the research landscape and extracting strategic insights are challenging due to the increasing diversity and volume of publications. This study proposes a natural language processing-based protocol for extracting text-encoded topics from a large volume of scientific literature, uncovering research interests of scientific communities, as well as convergence trends. We report a topic map, representing the materials science research landscape with text-mined 257 topics regarding biocompatible materials, structural materials, electrochemistry, or photonics. We analyze the topic map in terms of national research interests in materials science, revealing competitive positions and strategies of active nations. For example, it is found that the increasing trend of research interest in machine learning topic was captured in the United States earlier than other nations. Similarly, our journal-level analyses serve as reference information for journal recommendations and trend guidance, showing that the main topics and research interests of materials science journals slightly changed over time. Moreover, we build the topic association network which can highlight the status and future potential of interdisciplinary research, revealing research fields with high centrality in the network such as machine learning-enabled composite modeling, energy policy, or wearable electronics. This study offers insightful results on current and near-future materials science research landscapes, facilitating the understanding of stakeholders, amidst the fast-evolving and diverse knowledge of materials science.

Efficacy and Safety of Sirolimus-Eluting Stent With Biodegradable Polymer Ultimaster™ in Unselected Korean Population: A Multicenter, Prospective, Observational Study From Korean Multicenter Ultimaster Registry.

BACKGROUND AND OBJECTIVES: Ultimaster™, a third-generation sirolimus-eluting stent using biodegradable polymer, has been introduced to overcome long term adverse vascular events, such as restenosis or stent thrombosis. In the present study, we aimed to evaluate the 12-month clinical outcomes of Ultimaster™ stents in Korean patients with coronary artery disease. METHODS: This study is a multicenter, prospective, observational registry across 12 hospitals. To reflect real-world clinical evidence, non-selective subtypes of patients and lesions were included in this study. The study end point was target lesion failure (TLF) (the composite of cardiac death, target vessel myocardial infarction [MI], and target lesion revascularization [TLR]) at 12-month clinical follow up. RESULTS: A total of 576 patients were enrolled between November 2016 and May 2021. Most of the patients were male (76.5%), with a mean age of 66.0±11.2 years. Among the included patients, 40.1% had diabetes mellitus (DM) and 67.9% had acute coronary syndrome (ACS). At 12 months, the incidence of TLF was 4.1%. The incidence of cardiac death was 1.5%, MI was 1.0%, TLR was 2.7%, and stent thrombosis was 0.6%. In subgroup analysis based on the presence of ACS, DM, hypertension, dyslipidemia, or bifurcation, there were no major differences in the incidence of the primary endpoint. CONCLUSIONS: The present registry shows that Ultimaster™ stent is safe and effective for routine real-world clinical practice in non-selective Korean patients, having a low rate of adverse events at least up to 12 months.

Randomized trial comparing the efficacy between different types of paclitaxel-eluting stents: the comparison of efficacy between COroflex PLEASe ANd Taxus stent (ECO-PLEASANT) randomized controlled trial.

AIMS: Paclitaxel-eluting stents (PESs) have been shown to inhibit neointimal hyperplasia after percutaneous coronary intervention. Coroflex Please (B Braun, Melsungen, Germany) is a newly developed PES. We compared the clinical and angiographic efficacy of Coroflex Please with Taxus Liberte (Boston Scientific, Natick, MA) in a real-world practice. METHODS AND RESULTS: We performed a prospective, open-label, randomized, controlled study that enrolled 945 patients undergoing percutaneous coronary interventions in 18 centers in Korea. The primary end point was clinically driven target vessel revascularization at 9 months. The baseline characteristics were mostly similar and comparable between 2 groups. At 9 months, the incidence of clinically driven target vessel revascularization was 14.6% for Coroflex and 6.4% for Taxus, which was significantly different (hazard ratio 2.43, 95% CI 1.50-3.94, noninferiority P value = 1.000). This is well corroborated by the difference of in-stent late loss between 2 stents (0.71 ± 0.64 mm vs 0.52 ± 0.50 mm, P < .001) by 9-month follow-up angiography (n = 415 vs 215). Among secondary clinical end points, stent thrombosis (definite and probable) for 1 year was 2.2% in Coroflex and 1.3% in Taxus (P = .317). Also, myocardial infarction for 9 months was higher in Coroflex group than that in Taxus (4.9% vs 1.6%, P = .012), which was partly contributed by the higher incidence of periprocedural myocardial infarction in Coroflex arm (2.2% vs 0.3%, P = .028). CONCLUSIONS: Coroflex Please was inferior to Taxus Liberte with regard to clinical and angiographic efficacy.

Long-term results of surgical correction for mitral paravalvular leak: repair versus re-replacement.

BACKGROUND AND AIM OF THE STUDY: Paravalvular leak (PVL) is a common clinical manifestation after cardiac valve replacement. The results of surgical management for mitral PVL were evaluated and compared according to the surgery employed. METHODS: Between September 1995 and September 2009, a total of 52 patients (30 males, 22 females; mean age 57.2 +/- 13.0 years) underwent surgery for mitral PVL. Thirty-five patients (67.3%) underwent multiple cardiac surgeries more than once. PVL was treated with leak site repair in 22 patients (group I) and re-replacement of the mitral valve in 30 patients (group II). Concomitant operations were performed in 34 patients (65.4%). The mean duration of follow up was 57.4 +/- 39.4 months. RESULTS: There were six (11.5%) in-hospital deaths. Postoperative complications occurred in 19 patients, including low cardiac output syndrome (n = 7). There were no differences in early results between the two groups. The presence of more than moderate tricuspid regurgitation was the only risk factor for in-hospital mortality to reach statistical significance (p = 0.023). During the follow up period, late death occurred in 11 patients, including four cardiac deaths. The 10-year overall survival rate was 57.8%, without intergroup difference (p = 0.699). PVL recurred in 10 patients; the mean rate of freedom from recurrence of PVL was 67.7% at 10 years, and the five- and 10-year major valve-related event-free survival rates were 55.5% and 31.8%, respectively. There were no differences in freedom from recurrence of PVL (p = 0.346) and valve-related event-free survival (p = 0.824) between the two groups. CONCLUSION: The surgical treatment of mitral PVL proved to be acceptable when considering the high-risk profile of the patients. However, because of the similar outcomes after leak site repair and re-replacement, a more effective method might be selected on an individual basis when considering the surgical correction of mitral PVL.

Comparison of the International Normalized Ratio Between a Point-of-Care Test and a Conventional Laboratory Test: the Latter Performs Better in Assessing Warfarin-induced Changes in Coagulation Factors.

Background: Point-of-care testing (POCT) coagulometers are increasingly used for monitoring warfarin therapy. However, in high international normalized ratio (INR) ranges, significant discrepancy in the INR between POCT and conventional laboratory tests occurs. We compared the INR of POCT (CoaguChek XS Plus; Roche Diagnostics, Mannheim, Germany) with that of a conventional laboratory test (ACL TOP 750; Instrumentation Laboratory SpA, Milan, Italy) and explored possible reasons for discrepancy. Methods: Paired POCT and conventional laboratory test INRs were analyzed in 400 samples from 126 patients undergoing warfarin therapy after cardiac surgery. Coagulation factor and thrombin generation tests were compared using the Mann-Whitney U test. Correlations between coagulation factors and INRs were determined using Pearson correlation coefficients. Results: The mean difference in the INR between the tests increased at high INR ranges. Endogenous thrombin potential levels were decreased at INR <2.0 for CoaguChek XS Plus and 2.0< INR <3.0 for ACL TOP 750 compared with those at INR <2.0 for both tests, indicating a better performance of ACL TOP 750 in assessing thrombin changes. The correlation coefficients of coagulation factors were stronger for ACL TOP 750 INR than for CoaguChek XS Plus INR. Vitamin K-dependent coagulation factors were found to contribute to the INR discrepancy. Conclusions: Decreases in vitamin K-dependent coagulation and anticoagulation factors can explain the significant discrepancy between the two tests in high INR ranges. Since conventional laboratory test INR values are more reliable than POCT INR values, a confirmatory conventional laboratory test is required for high INR ranges.

Optimized self-microemulsifying drug delivery system improves the oral bioavailability and brain delivery of coenzyme Q10.

Our study aimed to develop a self-microemulsifying drug delivery system for the poorly aqueous-soluble drug Coenzyme Q10, to improve the dissolution and the oral bioavailability. Excipients were selected based on their Coenzyme Q10 solubility, and their concentrations were set for the optimization of the microemulsion by using a D-optimal mixture design to achieve a minimum droplet size and a maximum solubility of Coenzyme Q10 within 15 min. The optimized formulation was composed of an oil (omega-3; 38.55%), a co-surfactant (Lauroglycol® 90; 31.42%), and a surfactant (Gelucire® 44/14; 30%) and exhibited a mean droplet size of 237.6 ± 5.8 nm and a drug solubilization (at 15 min) of 16 ± 2.48%. The drug dissolution of the optimized formulation conducted over 8 h in phosphate buffer medium (pH 6.8) was significantly higher when compared to that of the Coenzyme Q10 suspension. A pharmacokinetic study in rats revealed a 4.5-fold and a 4.1-fold increase in the area under curve and the peak plasma concentration values generated by the optimized formulation respectively, as compared to the Coenzyme Q10 suspension. A Coenzyme Q10 brain distribution study revealed a higher Coenzyme Q10 distribution in the brains of rats treated with the optimized formulation than the Coenzyme Q10 suspension. Coenzyme Q10-loaded self microemulsifying drug delivery system was successfully formulated and optimized by a response surface methodology based on a D-optimal mixture design and could be used as a delivery vehicle for the enhancement of the oral bioavailability and brain distribution of poorly soluble drugs such as Coenzyme Q10.

Effectiveness and safety of non-vitamin K direct oral anticoagulants in atrial fibrillation patients with bioprosthetic valve.

BACKGROUND: Non-vitamin K direct oral anticoagulant (DOAC) is effective for prevention of embolic events in nonvalvular atrial fibrillation (AF) patients. However, the effectiveness and safety of DOAC in AF patients who have bioprosthetic heart valve (BPHV) is largely unknown. METHODS: We retrospectively identified patients with AF and BPHV, using the diagnostic code and medical device and surgery information from the Korean National Health Insurance Service database, between 2013 and 2018. A 1:2 propensity score-matched cohort (n = 724 taking warfarin; n = 362 taking DOAC) was constructed and analyzed for the primary clinical outcome, a composite of ischemic stroke and systemic embolism. Important secondary outcomes included major bleeding, all-cause death, and the net clinical outcome, defined as a composite of all embolic events, major bleeding, and death. RESULTS: The mean age was 78.9±6.8 years old, and 45% (n = 489) were male. The mean CHA2DS2-VASc score was 4.7±1.4. DOAC was non-inferior to warfarin for preventing ischemic stroke and systemic embolism (hazard ratio [HR] 1.14, 95% confidence interval [CI] 0.56-2.34), major bleeding (HR 0.80, 95% CI 0.32-2.03) and all-cause death (HR 1.09, 95% CI 0.73-1.63). As for the net clinical outcome, DOAC was also similar to warfarin (HR 1.06, 95% CI 0.76-1.47). These outcomes were not different in various subgroups analyzed. CONCLUSION: In this nationwide Korean AF population with a BPHV, DOAC was at least as effective and safe as warfarin for the prevention of systemic embolic events. These results suggest that DOAC may be an excellent alternative to warfarin in AF patients with BPHV.

Early Differentiation of Stress Cardiomyopathy from Acute Anterior Wall Myocardial Using Changing Cardiac Enzyme Patterns.

BACKGROUND: Most patients with acute anterior wall ST elevation myocardial infarction (STEMI) or stress cardiomyopathy (SCMP) show elevations in cardiac enzymes that peak within 24 hours. The changing pattern of cardiac enzymes can be an early clue to the differentiation of anterior STEMI and SCMP. METHODS: This study was a retrospective analysis (matching cases and respective control subjects) performed at a single center. We compared 27 patients with SCMP and 30 patients with anterior STEMI. We used laboratory data included cardiac marker, such as the initial creatine kinase MB (CK-MB) fraction and troponin T (Tn-T), at admission and peak CK-MB and Tn-T at follow up. RESULTS: The mean age was 69.3 ± 14.1 years, and 38.6% of patients were female. The SCMP patients were older, more often female, and had lower left ventricular ejection fractions than the anterior STEMI patients. The initial CK-MB was higher in the anterior STEMI group than in the SCMP group. In contrast, the initial Tn-T level was not significantly different between the 2 groups. Peak CK-MB and Tn-T levels and change from initial levels were significantly greater in the anterior STEMI group than they were in the SCMP group. SCMP could be differentiated from anterior STEMI based on peak CK-MB > 46.65 ng/mL or Tn-T > 1.56 ng/mL. CONCLUSIONS: Follow-up changes in cardiac enzymes can be an effective early tool for differentiating SCMP from anterior STEMI.

Suture reduction of the borderline ascending aortic dilatation during aortic valve replacement.

BACKGROUND: This study was conducted to evaluate the efficacy of simple suture reduction of the ascending aorta (SRA) performed with aortic valve replacement (AVR) in patients with borderline ascending aortic dilatation (45-50 mm). METHODS: Ninety-eight patients (ascending aortic diameter 47.7±3.4 mm) who underwent concomitant SRA with AVR were enrolled. Median follow-up duration was 83 (IQR 27-173) months. Computed tomographic angiography (CTA) follow-up was performed at 71 (47-149) months after surgery (N.=69). At least two CTA scans were performed in 34 patients (interval = 63 [46, 156] months). Early and long-term outcomes were evaluated, and dilatation rate (mm/year) of the repaired aorta was analyzed. Major adverse aortic events (MAEs) were defined as death related to aortic events, including sudden death, aortic rupture or dissection, aortic reoperation and recurrent aortic aneurysm (>45 mm). RESULTS: Early mortality rate was 2.0%. No patients had postoperative complications associated with SRA. A recurrent aortic aneurysm (>45 mm) was found in nine patients, but none of the patients had an ascending aorta diameter >50 mm. A multivariable analysis demonstrated that neither preoperative diameter of the ascending aorta nor bicuspid valve was associated with dilatation of the repaired aorta. Co-existing coronary artery disease was associated with both recurrent aneurysm and increased dilatation rate after SRA. There were two cases of sudden death and no one suffered from aortic dissection, rupture or aortic reoperation. Ten- and 20-year freedom rates from MAE were 90.3% and 79.3%, respectively. CONCLUSIONS: Concomitant SRA might be a safe and effective surgical alternative to ascending aorta replacement in AVR patients with borderline ascending aortic dilatation regardless of aortic valve pathology.

Modified basic and specific (BASP) classification for pattern hair loss.

BACKGROUND: In 2007, Lee et al. introduced a basic and specific (BASP) classification for pattern hair loss that was comprehensive and applicable regardless of race or gender. However, this BASP classification has several limitations. Frontal type hair loss classification is relatively crude, and a specific hair loss pattern cannot be ascertained when hair loss is associated with the temporal and occipital areas. METHODS: In our modified BASP classification, frontal type classification was subdivided into five instead of three grades. Basic type classification remained the same as in the previous method. In addition, information regarding the involvement of the temporal or occipital scalp was recorded. Accuracy and ease of use were evaluated and compared with the existing BASP classification in 138 patients with pattern hair loss. RESULTS: Temporal or occipital involvement was observed in 14 patients, accounting for 11.1% of subjects. Final type accuracy was 82.5% in the existing BASP classification and 71.4% in the modified classification. Ease of use for two practitioners was 70.2 and 72.1% for the existing BASP classification, and 48.9 and 52.2% for the modified method. CONCLUSION: We expect that the modified BASP classification will overcome the limitations of the existing BASP classification. We believe this modified classification will be a valuable tool for pattern hair loss classification because of its classification of previously unclassified types.

Negative differential transconductance device with a stepped gate dielectric for multi-valued logic circuits.

Multi-valued logic (MVL) technology is a promising approach for improving the data-handling capabilities and decreasing the power consumption of integrated circuits. This is especially attractive as conventional complementary metal-oxide-semiconductor technology is approaching its scaling and power density limits. Here, an ambipolar WSe2 field-effect transistor with two or more negative-differential-transconductance (NDT) regions in its transfer characteristic (NDTFET) is proposed for MVL applications of various radices. The operation and charge carrier transport mechanism of the NDTFET are studied first by Kelvin probe force microscopy, electrical, and capacitance-voltage measurements. Next, strategies for increasing the number of NDT regions and engineering the NDTFET transfer characteristic are discussed. Finally, the extensibility and tunability of our concept are demonstrated by adapting NDTFETs as core devices for ternary, quaternary, and quinary MVL inverters through simulations, where only WSe2 is employed as a channel material for all devices comprising the inverters. The MVL inverter operation principle and the mechanism of the multiple logic state formation are analyzed in detail. The proposed concept is practically verified by the fabrication of a ternary inverter.

Nonstructural NS5A Protein Regulates LIM and SH3 Domain Protein 1 to Promote Hepatitis C Virus Propagation.

Hepatitis C virus (HCV) propagation is highly dependent on cellular proteins. To identify the host factors involved in HCV propagation, we previously performed protein microarray assays and identified the LIM and SH3 domain protein 1 (LASP-1) as an HCV NS5A-interacting partner. LASP-1 plays an important role in the regulation of cell proliferation, migration, and protein-protein interactions. Alteration of LASP-1 expression has been implicated in hepatocellular carcinoma. However, the functional involvement of LASP1 in HCV propagation and HCV-induced pathogenesis has not been elucidated. Here, we first verified the protein interaction of NS5A and LASP-1 by both in vitro pulldown and coimmunoprecipitation assays. We further showed that NS5A and LASP-1 were colocalized in the cytoplasm of HCV infected cells. NS5A interacted with LASP-1 through the proline motif in domain I of NS5A and the tryptophan residue in the SH3 domain of LASP-1. Knockdown of LASP-1 increased HCV replication in both HCV-infected cells and HCV subgenomic replicon cells. LASP-1 negatively regulated viral propagation and thereby overexpression of LASP-1 decreased HCV replication. Moreover, HCV propagation was decreased by wild-type LASP-1 but not by an NS5A binding-defective mutant of LASP-1. We further demonstrated that LASP-1 was involved in the replication stage of the HCV life cycle. Importantly, LASP-1 expression levels were increased in persistently infected cells with HCV. These data suggest that HCV modulates LASP-1 via NS5A in order to regulate virion levels and maintain a persistent infection.

Optimization of Super-Hydrophobic Property by Two-Step Surface Modification.

The super-hydrophobic surface can be used in anti-pollution, self-cleaning, and anti-corrosive properties. Two-step surface treatment process on Al-coated glass was conducted by surface etching using potassium hydroxide (KOH) and surface coating using lauric acid for super-hydrophobic surface. The KOH-etched Al surface (1st etching) was changed to a hydrophilic property with a water contact angle (WCA) of 68° to 48°. On the other hand, the WCA of the etched Al surface was changed to about 153° with super-hydrophobic property when the lauric acid coating (2nd coating) was applied on the KOH-etched Al surface for 30 minutes. We found that the hydrophobicity of Al surface was related to the roughness by surface modification as well as the Al film thickness by sputtering method.