RESUMO
The purpose of this study was to determine potential metabolic biomarkers and therapeutic drugs in the gingival tissue of individuals with periodontitis. Liquid chromatography-mass spectrometry (LC-MS) and gas chromatography-mass spectrometry (GC-MS) were used to analyze the gingival tissue samples from 20 patients with severe periodontitis and 20 healthy controls. Differential metabolites were identified using variable important in projection (VIP) values from the orthogonal partial least squares discrimination analysis (OPLS-DA) model and then verified for significance between groups using a two-tailed Student's t test. In total, 65 metabolites were enriched in 33 metabolic pathways, with 40 showing a significant increase and 25 expressing a significant decrease. In addition, it was found that patients with severe periodontitis have abnormalities in metabolic pathways, such as glucose metabolism, purine metabolism, amino acid metabolism, and so on. Furthermore, based on a multidimensional analysis, 12 different metabolites may be the potential biomarkers of severe periodontitis. The experiment's raw data have been uploaded to the MetaboLights database, and the project number is MTBLS8357. Moreover, osteogenesis differentiation characteristics were detected in the selected metabolites. The findings may provide a basis for the study of diagnostic biomarkers and therapeutic metabolites in severe periodontitis.
Assuntos
Metabolômica , Periodontite , Humanos , Metabolômica/métodos , Cromatografia Gasosa-Espectrometria de Massas/métodos , Metaboloma , BiomarcadoresRESUMO
Oily wastewater has caused serious threats to the environment; thus, high-performance absorbing materials for effective oil-water separation technology have attracted increasing attention. Herein, we develop a magnetic, hydrophobic, and lipophilic hyperporous elastic material (HEM) templated by high internal phase emulsions (HIPE), in which free-radical polymerization of butyl acrylate (BA) and divinylbenzene (DVB) is employed in the presence of poly(dimethylsiloxane) (PDMS), lecithin surfactant, and modified Fe3O4 nanoparticles. The adoption of the emulsion template with nanoparticles as both stabilizers and cross-linkers endows the HEM with biomimetic hierarchical open-cell micropores and elastic cross-linked networks, generating an oil absorbent with outstanding mechanical stability. Compressive fatigue resistance of the HEM is demonstrated to endure 2000 mechanical cycles without plastic deformation or strength degradation. By exploiting the synergistic effect of hierarchical structures and low-surface-energy components, the resulting HEM also possesses excellent and robust hydrophobicity (water contact angle of 164°) and good oil absorption capacity, in which Fe3O4 nanoparticles lead to convenient magnetically controlled oil recyclability as well. Notably, the unique biomimetic microporous structure demonstrates superior oil retention capacity (>95% at 1000 rpm and >60% at 10,000 rpm) over the state-of-the-art porous materials for a diverse variety of oils to reduce the risk of secondary oil leakage, along with good recoverability by squeezing owing to the excellent compression resilience. These excellent performances of our HEM provide broad prospects for practical applications in oil-water separation, energy conversion, and smart soft robotics.
RESUMO
This study aimed to reinforce the barrier performance (i.e., oxygen-gas and water-vapor permeability) of poly(lactic acid) (PLA)-based films. Acetyltributylcitrate and zinc oxide nanoparticle (nano-ZnO), serving as plasticizer and nanofiller, respectively, were blended into a PLA matrix through a solvent-volatilizing method. The structural, morphological, thermal, and mechanical performances were then studied. Scanning electron microscopic images showed a significant dispersion of nano-ZnO in PLA ternary systems with low nano-ZnO content. The interaction between PLA matrix and ZnO nanoparticles was further analyzed by Fourier-transform infrared spectroscopy. Wide-angle X-ray scattering spectroscopy demonstrated high compatibility between PLA matrix and ZnO nanoparticles. Mechanical property studies revealed good tensile strength and low flexibility. Differential scanning calorimetry curves proved that an amorphous structure mostly existed in PLA ternary systems. The improvements in barrier property and tensile strength indicated that the PLA/nano-ZnO composite films could be used for food packaging application.
Assuntos
Nanocompostos/química , Poliésteres/química , Óxido de Zinco/química , Varredura Diferencial de Calorimetria , Nanocompostos/ultraestrutura , Nanopartículas/química , Nanopartículas/ultraestrutura , Oxigênio/química , Permeabilidade , Espectroscopia de Infravermelho com Transformada de Fourier , Vapor , Temperatura , Difração de Raios XRESUMO
The effects of poly(lactic acid) (PLA)-based film with inorganic antimicrobial nano-TiO2 and nano-Ag on the physicochemical and microbial quality of Tremella aurantialba stored at 4 ± 1 °C for 16 days was investigated. Rosemary essential oil (REO, 9 wt %) was added into PLA film as plasticizer. Low-density polyethylene (LDPE) and PLA film was used as the controls. The experiment measured physicochemical properties and microbial levels, such as weight loss, firmness, vitamin C, color, microbiological quality, and sensory quality. Although Tremella aurantialba packed by nano-composite films had the highest weight loss (4.96% and 5.17%) at the end of storage, it was still in the vicinity of 5%. Tremella aurantialba packed with nano-composite films were significantly (p < 0.05) firmer than those packed by LDPE, PLA, and PLA/REO films. The nano-composite films were more effective in reducing vitamin C and microbial counts and preserving the color of Tremella aurantialba than the other three groups. The overall acceptability of Tremella aurantialba packed by the nano-composite films still remained good and within the limits of marketability after 12 days of storage. The results suggested that the proposed nano-composite films could maintain the quality of Tremella aurantialba and extend its postharvest life.
Assuntos
Basidiomycota/química , Embalagem de Alimentos , Qualidade dos AlimentosRESUMO
Ecologically feasible strategies for constructing superhydrophobic surfaces offer versatile applications in waterproofing, self-cleaning, selective absorption, and corrosion protection. Herein, we prepared low-surface-energy branched-chain-enriched micronanorod (F@SiO2@MNC) by hydrolyzing silane coupling agent and modifying fluoropolymer using micro-nanocellulose extracted from waste straw (Chinese hemp). These rods were sprayed and adhered to various substrates precoated with a binder, resulting in superhydrophobic surfaces. F@SiO2@MNC addition allowed for the formation of stable spherical liquid droplets when in contact with different types of aqueous liquids. Furthermore, these surfaces demonstrated excellent self-cleaning, robustness, abrasion resistance, UV resistance, cycling stability, and other multifunctionalities. They significantly enhanced the mechanical properties of filter paper, effectively separated oil water mixtures, and improved the corrosion resistance of metals. Our proposed strategy represents a novel approach for developing multifunctional coatings assembled from micronanocellulose.
Assuntos
Cannabis , Dióxido de Silício , Corrosão , Interações Hidrofóbicas e Hidrofílicas , ChinaRESUMO
Infection and poor tissue repair are the key causes of percutaneous implantation failure. However, there is a lack of effective strategies to cope with due to its high requirements of sterilization, soft tissue healing, and osseointegration. In this work, l-arginine (L-Arg) was loaded onto a sulfonated polyetheretherketone (PEEK) surface to solve this issue. Under the infection condition, nitric oxide (NO) and reactive oxygen species (ROS) are produced through catalyzing L-Arg by inducible nitric oxide synthase (iNOS) and thus play a role in bacteria sterilization. Under the tissue repair condition, L-Arg is catalyzed to ornithine by Arginase-1 (Arg-1), which promotes the proliferation and collagen secretion of L929 and rBMSCs. Notably, L-Arg loading samples could polarize macrophages to M1 and M2 in infection and tissue repair conditions, respectively. The results in vivo show that the L-Arg loading samples could enhance infected soft tissue sealing and bone regeneration. In summary, L-Arg loading sulfonated PEEK could polarize macrophage through metabolic reprogramming, providing multi-functions of antibacterial abilities, soft tissue repair, and bone regeneration, which gives a new idea to design percutaneous implantation materials.
RESUMO
Rapid urban industrialization and agricultural production have led to the discharge of excessive phosphate into aquatic systems, resulting in a rise in water pollution. Therefore, there is an urgent need to explore efficient phosphate removal technologies. Herein, a novel phosphate capture nanocomposite (PEI-PW@Zr) with mild preparation conditions, environmental friendliness, recyclability, and high efficiency has been developed by modifying aminated nanowood with a zirconium (Zr) component. The Zr component imparts the ability to capture phosphate to the PEI-PW@Zr, while the porous structure provides a mass transfer channel, resulting in excellent adsorption efficiency. Additionally, the nanocomposite maintains more than 80% phosphate adsorption efficiency even after ten adsorption-desorption cycles, indicating its recyclability and potential for repeated use. This compressible nanocomposite provides novel insights into the design of efficient phosphate removal cleaners and offers potential approaches for the functionalization of biomass-based composites.
RESUMO
Various methods have been used to cope with heavy metal ion contamination in wastewater, which caused serious hazards to ecological and human health. Adsorption is one of the most frequent, economical and effective methods for removing these contaminants. Herein, a porous and amino-rich cellulose-based composite adsorbent (PEI-PCS) with anisotropic property was successfully prepared by covalently cross-linking polyethyleneimine on delignified corn straw. Combined with the porosity of straw substrate and the chelating ability of amino group to metal ions, the as-prepared PEI-PCS exhibited universality (various metal ions), rapid adsorption behavior (within 180 min achieve adsorption equilibrium), high adsorption capacity (85.47 mg g-1 for Cu(II)), and good durability (70 % of adsorption efficiency after 5 cycles). In addition, the adsorption process was conformed to pseudo-second-order dynamics and the Langmuir isotherm models. Lastly, the adsorption mechanism was also elucidated. This study provides a sustainable pathway for the manufacture of efficient biomass-based adsorbents and confirms that functionalized corn straw is a promising material for the treatment of heavy metal ions.
Assuntos
Metais Pesados , Poluentes Químicos da Água , Purificação da Água , Humanos , Celulose/química , Zea mays , Porosidade , Adsorção , Poluentes Químicos da Água/química , Metais Pesados/química , Íons , Purificação da Água/métodos , Cinética , Concentração de Íons de HidrogênioRESUMO
In this work, a novel oil-adsorption sponge with superhydrophobicity was fabricated using polymer-assisted electroless deposition and dip-coating techniques for depositing a rough polydopamine layer, magnetic particles, and low surface energy polydimethylsiloxane onto the surface of a sponge skeleton. The as-prepared superhydrophobic sponge (WCA > 150° and SA < 5°) exhibited rapid adsorption behavior, large adsorption capacity (up to 50.6 times its own dry weight or above 90% of its own volume), excellent durability (above 80% of the adsorption capacity after 80 recycles), and a self-cleaning property owing to sufficient open-cell pores and superelasticity provided by the melamine-formaldehyde host as well as the hierarchical roughness and convenient magnetic recovery enabled by the polymer-assisted electroless deposition approach. The pump-, gravity-, and solar-driven oil-water separation devices based on the fabricated cubic composites were also demonstrated, particularly the separation of high-viscosity oil-water mixtures via the solar-driven mode, demonstrating the broad prospects of such modified sponges in actual applications. This study provides a new avenue for rationally designing novel oil adsorption and separation materials.
RESUMO
Macrophages are an integral part of the innate immune response in periodontal tissue and play a crucial role in the progression of periodontitis. Here we reported that macrophages also provoke periodontitis-induced gingival destruction through Piezol-mediated collagen degradation. We discovered that the PIEZO1 expression was markedly elevated in patients with periodontitis through transcriptomic profiling. Moreover, Piezo1 promoted macrophage polarization toward the M1 type in response to lipopolysaccharide (LPS) and induced production of proinflammatory cytokines, which in turn stimulated production of matrix metalloproteinases (MMPs) leading to collagen degradation. Our study suggests that Piezol might be a potential therapeutic target for treating periodontitis-induced gingival destruction.
Assuntos
Gengiva , Periodontite , Humanos , Gengiva/metabolismo , Periodontite/metabolismo , Metaloproteinases da Matriz/metabolismo , Colágeno/metabolismo , Macrófagos/metabolismo , Canais Iônicos/metabolismoRESUMO
Traditional bone replacement materials have been developed with the goal of directing the osteogenesis of osteoblastic cell lines toward differentiation and therefore achieving biomaterial-mediated osteogenesis, but the osteogenic effect has been disappointing. With advances in bone biology, it has been revealed that the local immune microenvironment has an important role in regulating the bone formation process. According to the bone immunology hypothesis, the immune system and the skeletal system are inextricably linked, with many cytokines and regulatory factors in common, and immune cells play an essential role in bone-related physiopathological processes. This review combines advances in bone immunology with biomaterial immunomodulatory properties to provide an overview of biomaterials-mediated immune responses to regulate bone regeneration, as well as methods to assess the bone immunomodulatory properties of bone biomaterials and how these strategies can be used for future bone tissue engineering applications.
RESUMO
Developing three-dimensional porous hydrophobic and oleophilic materials (3D-PHOMs) for efficient and selective oil-water separation is important to clean up oil spills and organic pollutants. However, 3D-PHOMs are still confined to lab-scale research due to several crucial drawbacks. Herein, a hydrophobic oil-water separation composite, containing cellulose nanofiber (delignificated porous wood, PW) substrate, magnetic nickel (Ni) layer and hydrophobic polydimethylsiloxane (PDMS) coating, is prepared using electroless deposition (ELD) and surface modification techniques. Owing to the porosity, hydrophobicity (>130° of water contact angle), lipophilicity, convenient magnetic collection and high cycle compressibility, the as-fabricated PDMS-Ni-PW exhibits excellent oil adsorption capacity (>60% of the volumetric absorption capacity) and outstanding cyclic stability (>80% of the adsorption capacity after 200 cycles). Thanks to the low surface energy and rough surface structure, the adsorbent demonstrates superior oil-retention ability (>80% at 200 rpm). Also, the oil-collecting apparatus is successfully designed to continuously separate various oils, e.g., n-hexane and dichloromethane, from water due to the unidirectional liquid transport of the adsorbent. These excellent properties make PDMS-modified cellulose nanofiber a promising candidate for oil-water separation.
RESUMO
As the essential regulator of intestinal bacterial diversity, probiotics are a potential treatment for chronic high-salt diet (HSD)-induced metabolic dysfunction. Probiotic cells entrapped in microgels have been confirmed as being more effective than free cells in protecting bacteria against unfavorable conditions, that is, enhancing their stress resistance. This study explored the physiological mechanism by which probiotic microgels relieve HSD-induced hepatorenal injury. Herein, Lactobacillus rhamnosus was encapsulated in alginate-chitosan microgels which the percentage of alginate/chitosan was applied 1.5:0.5 (w/w) in this system, and the encapsulation significantly improved the probiotic viability in simulated gastrointestinal conditions. Mice were fed an HSD with L. rhamnosus (SDL) or L. rhamnosus microgels (SDEL). After 8 weeks of administration, dietary sodium was confirmed as inducing the hepatic and renal damages in mice, based on indicators, including serum biomarker levels, histopathological features of tissues, and pro-inflammatory cytokine contents in blood levels. However, the serum levels of urea nitrogen, creatinine, uric acid, glutamic-pyruvic transaminase, glutamic-oxalacetic transaminase, and alkaline phosphatase in the SDL and SDEL-fed mice were significantly lowered compared to the HSD-fed mice, especially in the SDEL group. HSD increased the abundances of Anaeroplasma, Enterorhabdus, Parvibacter, and Bacteroides, while the microgels increased the abundances of Lactobacillus, Bifidobacterium, Mucispirillum, and Faecalibaculum. Significant variations of fecal metabolome were validated for SDEL-treated mice, containing those linked to entero-hepatic circulation (e.g., cholic acid), carbohydrate metabolism (i.e., L-lactic acid), and increased antioxidants including citric acid. Furthermore, the probiotic microgels ameliorated intestinal damage by improving barrier and absorption functions. These results augmented existing knowledge on probiotic application for salt toxicity.
RESUMO
The facile and low-cost fabrication of free-standing magnetic catalysts with high catalytic efficiency, rapid reaction rate and excellent recoverability has been pursued for various catalysis applications, e.g., treating aqueous organic 4-nitrophenol pollutants. Here, we design and fabricate a free-standing nickel-coated hyperporous polymer foam (Ni-HPF) with adjustable shapes and sizes, hierarchical multiscale porous structures, abundant catalytical interfaces and excellent super-paramagnetic properties. Due to the synergistical effect of abundant binding sites and highly catalytic reduction, the as-prepared Ni-HPF has demonstrated high conversion efficiency (> 90% at extremely low concentration of 7.5 µM) and rapid reaction rate (2.58 × 10-3 s-1) for the reduction of organic 4-nitrophenol. Moreover, the magnetic catalyst also holds excellent recoverability (>80% conversion rate even after 1000 cycles) and good reproducibility (>80% conversion rate after 3 months of storage). As such, this work with novel material design and working principle could provide a wide range of potential applications in water purification, chemical catalysis and energy storage devices.
RESUMO
A bioactive micro/nanostructured calcium phytate coating was successfully prepared on titanium surfaces by chemical conversion deposition, mainly through hydrothermal treatment of a mixed solution of phytic acid and saturated calcium hydroxide solution. Ultraviolet radiation was carried out to improve the adhesion of the coating to the titanium substrate. Pure titanium with a sandblasted/acid-etched surface was used as the control group. The topography and chemical composition of the modified surfaces were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), and static water contact angle measurement. A pull-off test was performed to measure the coating-to-substrate adhesion strength. Bovine serum albumin was used as a model to study the protein adsorption effect. Cells were cultured on titanium surfaces for 7 days in osteogenic differentiation medium, then the osteoblast compatibility in vitro were explored by alkaline phosphatase and alizarin red staining. After 1, 2, 4 and 8 wks of immediate implantation of titanium implants into the mandibles of New Zealand white rabbits, biological effects in vivo were researched by microcomputed tomography analysis and histological evaluation. The results indicated that the roughness and hydrophilicity of the modified surfaces with micro/nanostructure remarkably increased compared to those of the control group. The pull-off test showed the average adhesion strength at the coating-substrate interface to be higher than 13.56 ± 1.71 MPa. In addition, approximately 4.41 mg/L calcium ion was released from the calcium phytate micro/nano coatings to the local environment after 48 h of immersion. More importantly, the micro/nanostructure titanium substrates significantly promoted cellular differentiation in vitro and in vivo. After 8 wks, the bone implant contact ratio (BIC, %) of the modified implants was higher than that of the control group, at 94.09 ± 0.55% and 86.18 ± 1.99% (p < 0.05). Overall, this study provided new insights into the factors promoting early osseointegration of titanium alloys, which had great potential not only for dental implants but also for various other biomaterial applications.
Assuntos
Implantes Dentários , Nanoestruturas , Animais , Microscopia Eletrônica de Varredura , Osseointegração , Osteogênese , Ácido Fítico , Coelhos , Propriedades de Superfície , Titânio , Raios Ultravioleta , Microtomografia por Raio-XRESUMO
Enhancing the functions of mesenchymal stem cells (MSCs) is considered a potential approach for promoting tissue regeneration. In this study, we investigated the effects of Matrix Metalloproteinase-1 (MMP-1) on bone marrow mesenchymal stem cells (BMSCs) and its mechanism. Our results showed that knockdown of MMP-1 impeded scratch closure, attenuated proliferation, inhibited ALP activity, ALP denser staining and mineralization in vitro, and decreased expression of RUNX2, OSX, OPN and OCN in BMSCs, while 20 ng/mL recombinant human MMP-1 protein (rhMMP-1) significantly accelerated scratch closure, enhanced proliferation, ALP activity, ALP denser staining and mineralization in vitro, and increased expression of RUNX2, OSX, OPN and OCN. In addition, knockdown of MMP-1 inhibited the expression of phosphorylated c-Jun N-terminal kinase (p-JNK) and phosphorylated extracellular regulated protein kinases (p-ERK), while 20 ng/mL rhMMP-1 increased the expression of p-JNK and p-ERK in BMSCs. Furthermore, inhibition of c-Jun N-terminal kinase (JNK) and extracellular regulated protein kinases (ERK) by their inhibitor SP600125 and PD98059 dramatically blocked MMP-1-enhanced ALP activity and mineralization in BMSCs. Our results revealed that MMP-1 could accelerate the osteogenic differentiation potentials of BMSCs via the JNK and ERK pathway, providing the mechanism underlying MSC biology and identifying a potential target for improving bone tissue regeneration.
Assuntos
Diferenciação Celular , MAP Quinases Reguladas por Sinal Extracelular/metabolismo , Proteínas Quinases JNK Ativadas por Mitógeno/metabolismo , Sistema de Sinalização das MAP Quinases , Metaloproteinase 1 da Matriz/metabolismo , Células-Tronco Mesenquimais/citologia , Osteogênese , Proliferação de Células , Humanos , Células-Tronco Mesenquimais/metabolismo , FosforilaçãoRESUMO
AIMS: Diabetes mellitus leads to impaired osteogenic differentiation and alveolar bone absorption. Periostin (POSTN) is important for bone and tooth maintenance. This study aims to elucidate the expression of POSTN in high glucose and the effects of both high glucose and POSTN on osteogenesis in hPDLSCs, as well as the underlying mechanism. MAIN METHODS: Cells were incubated with glucose under physiological (5.5 mM normal glucose) or diabetic (30 mM high glucose) conditions in the presence or absence of recombinant human POSTN (rPOSTN). Cell migration was assessed by a scratch assay. Reactive oxygen species (ROS) was used to assess HG-induced oxidative damage. Osteogenesis was evaluated by alkaline phosphatase (ALP) activity and ALP staining, Alizarin Red staining (ARS), as well osteogenic related genes and proteins. KEY FINDINGS: POSTN expression was inhibited during a long-term culture with HG. HG diminished the migration and osteogenesis of hPDLSCs as indicated by decreases in ALP activity and ALP staining, ARS and expression of COL I, RUNX2, OSX, OPN and OCN, but an increase in reactive oxygen species overproduction. All of which were reversed by addition of rPOSTN. POSTN knockdown suppressed migration and osteogenesis of hPDLSCs. Moreover, HG inhibited activation of AKT, which was rescued by addition of POSTN. AKT inhibitor significantly reduced POSTN-mediated osteogenic differentiation. SIGNIFICANCE: rPOSTN could be a therapeutic regime for defective periodontal and peri-implant bone regeneration in diabetes mellitus.
Assuntos
Moléculas de Adesão Celular/metabolismo , Osteogênese , Ligamento Periodontal/crescimento & desenvolvimento , Proteínas Proto-Oncogênicas c-akt/metabolismo , Transdução de Sinais/efeitos dos fármacos , Adolescente , Western Blotting , Criança , Glucose/farmacologia , Humanos , Ligamento Periodontal/metabolismo , Proteínas Proto-Oncogênicas c-akt/fisiologia , Espécies Reativas de Oxigênio/metabolismo , Reação em Cadeia da Polimerase em Tempo Real , Células-Tronco/metabolismo , Adulto JovemRESUMO
OBJECTIVES: Enhanced migration and osteogenic differentiation of mesenchymal stem cells (MSCs) are beneficial for MSC-mediated periodontal tissue regeneration, a promising method for periodontitis treatment. FBXO5, a member of the F-box protein family, is involved in the osteogenic differentiation of MSCs. Here, we investigated the effect of FBXO5 on human periodontal ligament stem cells (hPDLSCs). MATERIALS AND METHODS: hPDLSCs were isolated from periodontal ligament tissue. Lentivirus FBXO5 shRNA was used to silence FBXO5 expression. Two transcripts of FBXO5 were overexpressed and transduced into hPDLSCs via retroviral infection. Migration and osteogenic differentiation of hPDLSCs were evaluated using the scratch migration assay, alkaline phosphatase (ALP) activity, ALP staining, alizarin red staining, western blotting, and real-time polymerase chain reaction. RESULTS: The expression of FBXO5 was upregulated after osteogenic induction in hPDLSCs. FBXO5 knockdown attenuated migration, inhibited ALP activity and mineralization, and decreased RUNX2, OSX, and OCN expression, while the overexpression of two transcript isoforms significantly accelerated migration, enhanced ALP activity and mineralization, and increased RUNX2, OSX, and OCN expression in hPDLSCs. CONCLUSIONS: Both isoforms of FBXO5 promoted the migration and osteogenic differentiation potential of hPDLSCs, which identified a potential target for improving periodontal tissue regeneration.
Assuntos
Proteínas de Ciclo Celular/genética , Diferenciação Celular/genética , Proteínas F-Box/genética , Células-Tronco Mesenquimais/citologia , Osteogênese/genética , Ligamento Periodontal/citologia , Adolescente , Proteínas de Ciclo Celular/metabolismo , Movimento Celular/genética , Criança , Proteínas F-Box/metabolismo , Técnicas de Silenciamento de Genes , Humanos , Células-Tronco Mesenquimais/metabolismo , RNA Mensageiro/genética , RNA Mensageiro/metabolismo , Regulação para Cima/genéticaRESUMO
Antimicrobial active films based on poly (lactic acid) (PLA) were prepared with nano-silver (nano-Ag) and nano-zinc oxide (nano-ZnO) using a solvent volatilizing method. The films were characterized for mechanical, structural, thermal, physical and antimicrobial properties. Scanning electron microscopy (SEM) images characterized the fracture morphology of the films with different contents of nano-Ag and nano-ZnO. The addition of nanoparticles into the pure PLA film decreased the tensile strength and elasticity modulus and increased the elongation of breaks-in other words, the flexibility and extensibility of these composites improved. According to the results of differential scanning calorimetry (DSC), the glass transition temperature of the PLA nano-composite films decreased, and the crystallinity of these films increased; a similar result was apparent from X-ray diffraction (XRD) analysis. The water vapor permeability (WVP) and opacity of the PLA nano-composite films augmented compared with pure PLA film. Incorporation of nanoparticles to the PLA films significantly improved the antimicrobial activity to inhibit the growth of Escherichia coli. The results indicated that PLA films with nanoparticles could be considered a potential environmental-friendly packaging material.