RESUMO
OBJECTIVE: The purpose of this study was to investigate the reliability of computer-assisted methods of estimating breast density. MATERIALS AND METHODS: Craniocaudal mammograms of 100 healthy subjects were collected from a screening mammography database. Three expert readers independently assessed mammographic breast density twice in a 1-month period using interactive thresholding and semiautomated methods. In addition, fully automated breast density estimation software was used to generate objective breast density estimates. The reliability of the computer-assisted breast density estimation was assessed in terms of concordance correlation coefficients, limits of agreement, systematic difference, and reader variability. RESULTS: Statistically significant systematic bias (paired t test, p < 0.01) and variability (4.75-10.91) were found within and between readers for both the interactive thresholding and the semiautomated methods. Using the semiautomated method significantly reduced the within-reader bias of one reader (p < 0.02) and the between-reader variability of all three readers (p < 0.05). The breast density estimates obtained with the fully automated method had excellent agreement with those of the reference standard (concordance correlation coefficient, 0.93) without a significant systematic difference. CONCLUSION: Reader-dependent variability and systematic bias exist in breast density estimates obtained with the interactive thresholding method, but they may be reduced in part by use of the semiautomated method. Assessing reader performance may be necessary for more reliable breast density estimation, especially for surveillance of breast density over time. The fully automated method has the potential to provide reliable breast density estimates nearly free from reader-dependent systematic bias and reader variability.
Assuntos
Densidade da Mama , Neoplasias da Mama/diagnóstico por imagem , Mamografia/métodos , Interpretação de Imagem Radiográfica Assistida por Computador/métodos , Adulto , Idoso , Automação , Feminino , Humanos , Pessoa de Meia-Idade , Reprodutibilidade dos Testes , SoftwareRESUMO
BACKGROUND/AIM: The aim was to assess the complexity of breast volumetric-modulated arc therapy (VMAT) plans using various indices and to evaluate their performance through gamma analysis in predicting plan deliverability. MATERIALS AND METHODS: A total of 285 VMAT plans for 260 patients were created using the VersaHD™ linear accelerator with a Monaco treatment planning system. Corresponding verification plans were generated using the ArcCHECK® detector, and gamma analysis was conducted employing various criteria. Twenty-eight plan complexity metrics were computed, and Pearson's correlation coefficients were determined between the gamma passing rate (GPR) and these metrics. RESULTS: The average GPR values for all plans were 97.7%, 89.9%, and 78.0% for the 2 mm/2%, 1 mm/2%, and 1 mm/1% criteria, respectively. While most complexity metrics exhibited weak correlations with GPRs under the 2 mm/2% criterion, leaf sequence variability (LSV), plan-averaged beam area (PA), converted area metric (CAM), and edge area metric (EAM) demonstrated the most robust performance, with Pearson's correlation coefficients of 0.57, 0.50, -0.70, and -0.56, respectively. CONCLUSION: Metrics related to beam aperture size and irregularity, such as LSV, PA, CAM and EAM, proved to be reasonable predictors of plan deliverability in breast VMAT.
Assuntos
Neoplasias da Mama , Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por Computador , Radioterapia de Intensidade Modulada , Humanos , Radioterapia de Intensidade Modulada/métodos , Planejamento da Radioterapia Assistida por Computador/métodos , Neoplasias da Mama/radioterapia , Feminino , Aceleradores de Partículas/instrumentação , AlgoritmosRESUMO
PURPOSE: We applied a radiomics approach to skin surface images to objectively assess acute radiation dermatitis in patients undergoing radiotherapy for breast cancer. METHODS: A prospective cohort study of 20 patients was conducted. Skin surface images in normal, polarized, and ultraviolet (UV) modes were acquired using a skin analysis device before starting radiotherapy ('Before RT'), approximately 7 days after the first treatment ('RT D7'), on 'RT D14', and approximately 10 days after the radiotherapy ended ('After RT D10'). Eighteen types of radiomic feature ratios were calculated based on the values acquired 'Before RT'. We measured skin doses in ipsilateral breasts using optically stimulated luminescent dosimeters on the first day of radiotherapy. Clinical evaluation of acute radiation dermatitis was performed using the Radiation Therapy Oncology Group scoring criteria on 'RT D14' and 'After RT D10'. Several statistical analysis methods were used in this study to test the performance of radiomic features as indicators of radiodermatitis evaluation. RESULTS: As the skin was damaged by radiation, the energy for normal mode and sum variance for polarized and UV modes decreased significantly for ipsilateral breasts, whereas contralateral breasts exhibited a smaller decrease with statistical significance. The radiomic feature ratios at 'RT D7' had strong correlations to skin doses and those at 'RT D14' and 'after RT D10' with statistical significance. CONCLUSIONS: The energy for normal mode and sum variance for polarized and UV modes demonstrated the potential to evaluate and predict acute radiation, which assists in its appropriate management.
Assuntos
Neoplasias da Mama , Radiodermite , Humanos , Feminino , Radiodermite/diagnóstico por imagem , Neoplasias da Mama/diagnóstico por imagem , Neoplasias da Mama/radioterapia , Estudos Prospectivos , Mama/diagnóstico por imagem , Pele/diagnóstico por imagemRESUMO
We propose a deep learning-assisted overscan decision algorithm in chest low-dose computed tomography (LDCT) applicable to the lung cancer screening. The algorithm reflects the radiologists' subjective evaluation criteria according to the Korea institute for accreditation of medical imaging (KIAMI) guidelines, where it judges whether a scan range is beyond landmarks' criterion. The algorithm consists of three stages: deep learning-based landmark segmentation, rule-based logical operations, and overscan determination. A total of 210 cases from a single institution (internal data) and 50 cases from 47 institutions (external data) were utilized for performance evaluation. Area under the receiver operating characteristic (AUROC), accuracy, sensitivity, specificity, and Cohen's kappa were used as evaluation metrics. Fisher's exact test was performed to present statistical significance for the overscan detectability, and univariate logistic regression analyses were performed for validation. Furthermore, an excessive effective dose was estimated by employing the amount of overscan and the absorbed dose to effective dose conversion factor. The algorithm presented AUROC values of 0.976 (95% confidence interval [CI]: 0.925-0.987) and 0.997 (95% CI: 0.800-0.999) for internal and external dataset, respectively. All metrics showed average performance scores greater than 90% in each evaluation dataset. The AI-assisted overscan decision and the radiologist's manual evaluation showed a statistically significance showing a p-value less than 0.001 in Fisher's exact test. In the logistic regression analysis, demographics (age and sex), data source, CT vendor, and slice thickness showed no statistical significance on the algorithm (each p-value > 0.05). Furthermore, the estimated excessive effective doses were 0.02 ± 0.01 mSv and 0.03 ± 0.05 mSv for each dataset, not a concern within slight deviations from an acceptable scan range. We hope that our proposed overscan decision algorithm enables the retrospective scan range monitoring in LDCT for lung cancer screening program, and follows an as low as reasonably achievable (ALARA) principle.
Assuntos
Aprendizado Profundo , Neoplasias Pulmonares , Acreditação , Algoritmos , Detecção Precoce de Câncer , Humanos , Neoplasias Pulmonares/diagnóstico por imagem , Estudos Retrospectivos , Tomografia Computadorizada por Raios XRESUMO
While the recent advancements of computed tomography (CT) technology have contributed in reducing radiation dose and image noise, an objective evaluation of image quality in patient scans has not yet been established. In this study, we present a patient-specific CT image quality evaluation method that includes fully automated measurements of noise level, structure sharpness, and alteration of structure. This study used the CT images of 120 patients from four different CT scanners reconstructed with three types of algorithm: filtered back projection (FBP), vendor-specific iterative reconstruction (IR), and a vendor-agnostic deep learning model (DLM, ClariCT.AI, ClariPi Inc.). The structure coherence feature (SCF) was used to divide an image into the homogeneous (RH) and structure edge (RS) regions, which in turn were used to localize the regions of interests (ROIs) for subsequent analysis of image quality indices. The noise level was calculated by averaging the standard deviations from five randomly selected ROIs on RH, and the mean SCFs on RS was used to estimate the structure sharpness. The structure alteration was defined by the standard deviation ratio between RS and RH on the subtraction image between FBP and IR or DLM, in which lower structure alterations indicate successful noise reduction without degradation of structure details. The estimated structure sharpness showed a high correlation of 0.793 with manually measured edge slopes. Compared to FBP, IR and DLM showed 34.38% and 51.30% noise reduction, 2.87% and 0.59% lower structure sharpness, and 2.20% and -12.03% structure alteration, respectively, on an average. DLM showed statistically superior performance to IR in all three image quality metrics. This study is expected to contribute to enhance the CT protocol optimization process by allowing a high throughput and quantitative image quality evaluation during the introduction or adjustment of lower-dose CT protocol into routine practice.
Assuntos
Interpretação de Imagem Radiográfica Assistida por Computador , Tomografia Computadorizada por Raios X , Algoritmos , Humanos , Doses de Radiação , Interpretação de Imagem Radiográfica Assistida por Computador/métodos , Tomografia Computadorizada por Raios X/métodosRESUMO
BACKGROUND/AIM: To present the variations in the target delineation and the planning results of intensity-modulated radiation therapy (IMRT) for breast cancers. PATIENTS AND METHODS: We requested the target volumes and organs at risk delineation for two cases of left breast cancers, and evaluated the IMRT plans including the supraclavicular and internal mammary node irradiation. RESULTS: Twenty-one institutions participated in this study. Differences in the planning target volume among institutions reached up to three-times for breast-conserving surgery (BCS) case and five-times for mastectomy case. Mean heart doses ranged from 3.3 to 24.1 Gy for BCS case and from 5.0 to 26.5 Gy for mastectomy case. Ipsilateral lung volumes receiving more than 20 Gy ranged from 4.7 to 57.4% for BCS case and from 16.4 to 55.5% for mastectomy case. CONCLUSION: There were large variations in the target delineation and planning results of IMRT for breast cancers among institutions. Considering the increased use of breast IMRT, more standardized protocols are needed.
Assuntos
Neoplasias da Mama/radioterapia , Radioterapia de Intensidade Modulada/métodos , Neoplasias da Mama/diagnóstico por imagem , Feminino , Humanos , Relações Interinstitucionais , Pessoa de Meia-Idade , Órgãos em Risco , República da CoreiaRESUMO
OBJECTIVE: To analyze the effect of intra- and interfractional motion during breast intensity modulated radiation therapy (IMRT) by calculating dose distribution based on four-dimensional computed tomography (4DCT). METHODS: 20 patients diagnosed with left breast cancer were enrolled. Three-dimensional CT (3DCT) along with 10 phases of 4DCT were collected for each patient, with target volumes independently delineated on both 3DCT and all phases of 4DCT. IMRT plans were generated based on 3DCT (43.2 Gy in 16 fractions). The plan parameters for each segment were split into phases based on time duration estimates for each respiratory phase, with phase-specific dose distributions calculated and summated (4D-calculated dose). The procedure is repeated for 16 fractionations by randomly allocating starting phase using random-number generation to simulate interfractional discrepancy caused by different starting phase. Comparisons of plan quality between the original and 4D-calculated doses were analyzed. RESULTS: There was a significant distortion in 4D-calculated dose induced by respiratory motion in terms of conformity and homogeneity index compared to those of the original 3D plan. Mean doses of the heart and the ipsilateral lung were significantly higher in the 4D-calculated doses compared to those of the original 3D plan (0.34 Gy, p = 0.010 and 0.59 Gy, p < 0.001), respectively). The mean internal mammary lymph node (IMN) dose was significantly greater in the 4D-calculated plan, compared to the original 3D plan (1.42 Gy, p < 0.001). CONCLUSIONS: IMN doses should be optimized during the dose-calculation for the free-breathing left breast IMRT. ADVANCES IN KNOWLEDGE: The interplay effect between respiratory motion and multileaf collimator modulation caused discrepancies in dose distribution, particularly in IMN.
Assuntos
Tomografia Computadorizada Quadridimensional , Imageamento Tridimensional/métodos , Radioterapia de Intensidade Modulada , Neoplasias Unilaterais da Mama/diagnóstico por imagem , Neoplasias Unilaterais da Mama/radioterapia , Fracionamento da Dose de Radiação , Feminino , Coração , Humanos , Pulmão , Irradiação Linfática/métodos , Movimentos dos Órgãos , Planejamento da Radioterapia Assistida por Computador , Radioterapia Adjuvante/métodos , Respiração , Estudos Retrospectivos , Tomografia Computadorizada por Raios X/métodos , Neoplasias Unilaterais da Mama/cirurgiaRESUMO
PURPOSE: To demonstrate the impact of modulation indices and plan parameters on the gamma passing rates (GPR) of patient-specific quality assurance of standard and stereotactic volumetric modulated arc therapy (VMAT) plans. METHODS: A total of 758 patients' QA plans were utilized, including standard VMAT plans with Trilogy (nâ¯=â¯87, group A) and TreuBeam STx (nâ¯=â¯332, group B), and 339 stereotactic VMAT plans with TrueBeam STx (group C). Modulation indices were obtained considering the speed and acceleration of the multileaf collimator (MLC) (MIs, MIa), and MLC, gantry speed, and dose rate changes (MIt). The mean aperture size (MA), monitor unit (MU), and amount of jaw tracking (%JT) were acquired. Gamma analysis was performed with 2â¯mm/2% and 1â¯mm/2% for the standard and stereotactic VMAT plans, respectively. Statistical analyses were performed to investigate the correlation between modulation index/plan parameters and GPR. RESULTS: Spearman's rank correlation to GPRs with MIs, MIa, and MIt, were -0.44, -0.45, and -0.46 for group A; -0.39, -0.37, and -0.38 for group B; and -0.04, -0.11, and -0.10 for group C, respectively. While MU and MA showed significant correlations in all groups, %JT showed a significant correlation only with stereotactic VMAT plans. The most influential parameter combinations were MU-MA (rsâ¯=â¯0.50), MIs-%JT (rsâ¯=â¯0.43), and MU-%JT (rsâ¯=â¯0.38) for groups A, B, and C, respectively. CONCLUSIONS: MLC modulation mostly affected the GPR in the delivery of standard VMAT plans, while MU and %JT showed more importance in stereotactic VMAT plans.
Assuntos
Radiocirurgia , Planejamento da Radioterapia Assistida por Computador/métodos , Radioterapia de Intensidade Modulada , Humanos , Imagens de Fantasmas , Medicina de Precisão , Controle de QualidadeRESUMO
BACKGROUND: To evaluate the modulation indices (MIs) for predicting the plan delivery accuracies of intensity-modulated radiation therapy (IMRT) plans. METHODS: A total of 100 dynamic IMRT plans that used TrueBeam STx and 102 dynamic IMRT plans that used Trilogy were selected. For each plan, various MIs were calculated, which included the modulation complexity score (MCS), plan-averaged beam area (PA), plan-averaged beam irregularity (PI), plan-averaged beam modulation (PM), MI quantifying multi-leaf collimator (MLC) speeds (MIs), MI quantifying MLC acceleration (MIa), and MI quantifying MLC acceleration and segment aperture irregularity (MIc,IMRT). To determine plan delivery accuracy, global gamma passing rates, MLC errors of log files, and dose-volumetric parameter differences between original and log file-reconstructed IMRT plans were obtained. To assess the ability of each MI for predicting plan delivery accuracy, Spearman's rank correlation coefficients (rs) between MIs and plan delivery accuracy measures were calculated. RESULTS: PI showed moderately strong correlations with gamma passing rates in MapCHECK2 measurements of both TrueBeam STx and Trilogy (rs = - 0.591 with p < 0.001 and - 0.427 with p < 0.001 to with gamma criterion of 2%/2 mm, respectively). For ArcCHECK measurements, PI also showed moderately strong correlations with the gamma passing rates in the ArcCHECK measurements of TrueBeam STx and Trilogy (rs = - 0.545 with p < 0.001 and rs = - 0.581 with p < 0.001 with gamma criterion of 2%/2 mm, respectively). The PI showed the second strongest correlation with MLC errors in both TrueBeam STx and Trilogy (rs = 0.861 with p < 0.001 and rs = 0.767 with p < 0.001, respectively). In general, the PI showed moderately strong correlations with every plan delivery accuracy measure. CONCLUSIONS: The PI showed moderately strong correlations with every plan delivery accuracy measure and therefore is a useful predictor of IMRT delivery accuracy.
Assuntos
Neoplasias/radioterapia , Garantia da Qualidade dos Cuidados de Saúde/normas , Controle de Qualidade , Planejamento da Radioterapia Assistida por Computador/métodos , Planejamento da Radioterapia Assistida por Computador/normas , Radioterapia de Intensidade Modulada/normas , Humanos , Aceleradores de Partículas , Radiometria/métodos , Dosagem Radioterapêutica , Radioterapia de Intensidade Modulada/métodosRESUMO
PURPOSE: To evaluate the neutron dose equivalent produced by photoneutrons inside the primary barriers of a radiotherapy vault. METHODS: Monte Carlo simulations were performed for investigating the production of photoneutrons as well as neutron shielding requirements. Two photon beams of 15 and 18â¯MV struck sheets of steel and lead, and the neutron doses were calculated at the isocenter (Piso) and at a distance of 50â¯cm from the inside wall (Pwall) while delivering 1â¯Gy to the patient. The proper thicknesses of borated polyethylene (BPE) and concrete were simulated to reduce neutron contamination. RESULTS: When the primary barrier consisted of a concrete alone, the neutron doses at Piso were 0.5⯵Sv/Gy and 12.8⯵Sv/Gy for 15- and 18-MV, respectively. At Pwall, the neutron doses were 15.8⯵Sv/Gy and 318.4⯵Sv/Gy for 15- and 18-MV, respectively. When 15â¯MV photons interacted with metal sheets, the neutron doses were 0.4-22.2⯵Sv/Gy at Piso and 15.8-812.5⯵Sv/Gy at Pwall, depending on the thickness and material of the metal sheets and neutron shielding. In the case of 18â¯MV photons with the same configuration, the neutron doses were 0.9-59.5⯵Sv/Gy and 73.9-5006.1⯵Sv/Gy for Piso and Pwall, respectively. The neutron dose delivered to the patient was reduced to the level of the dose delivered with a concrete barrier by including a 10-cm-thick BPE for each beam. CONCLUSIONS: When the primary barrier shielding is designed with a metal sheet inside for high energy, proper neutron shielding should be constructed to avoid undesirable photoneutron dose.
Assuntos
Método de Monte Carlo , Nêutrons/uso terapêutico , Fótons/uso terapêutico , Doses de Radiação , Radioterapia/instrumentação , Aceleradores de PartículasRESUMO
PURPOSE: To investigate and improve the domestic standard of radiation therapy in the Republic of Korea. METHODS: On-site audits were performed for 13 institutions in the Republic of Korea. Six items were investigated by on-site visits of each radiation therapy institution, including collimator, gantry, and couch rotation isocenter check; coincidence between light and radiation fields; photon beam flatness and symmetry; electron beam flatness and symmetry; physical wedge transmission factors; and photon beam and electron beam outputs. RESULTS: The average deviations of mechanical collimator, gantry, and couch rotation isocenter were less than 1mm. Those of radiation isocenter were also less than 1mm. The average difference between light and radiation fields was 0.9±0.6mm for the field size of 20cm×20cm. The average values of flatness and symmetry of the photon beams were 2.9%±0.6% and 1.1%±0.7%, respectively. Those of electron beams were 2.5%±0.7% and 0.6%±1.0%, respectively. Every institutions showed wedge transmission factor deviations less than 2% except one institution. The output deviations of both photon and electron beams were less than ±3% for every institution. CONCLUSIONS: Through the on-site audit program, we could effectively detect an inappropriately operating linacs and provide some recommendations. The standard of radiation therapy in Korea is expected to improve through such on-site audits.
Assuntos
Institutos de Câncer/normas , Garantia da Qualidade dos Cuidados de Saúde , Radioterapia/instrumentação , Radioterapia/normas , Aceleradores de Partículas , Fótons , Radioterapia (Especialidade) , República da CoreiaRESUMO
PURPOSE: We aimed to evaluate the characteristics of optically stimulated luminescence dosimeters (OSLDs) with fully filled deep electron/hole traps, and determine the optimal bleaching conditions for these OSLDs to minimize the changes in dose sensitivity or linearity according to the accumulated dose. METHODS: InLight nanoDots were used as OSLDs. The OSLDs were first pre-irradiated at a dose greater than 5kGy to fill the deep electron and hole traps, and then bleached (OSLDfull). OSLDfull characteristics were investigated in terms of the full bleaching, fading, regeneration of luminescence, dose linearity, and dose sensitivity with various bleaching conditions. For comparison, OSLDs with un-filled deep electron/hole traps (OSLDempty) were investigated in the same manner. RESULTS: The fading for OSLDfull exhibited stable signals after 10min, for 1 and 10Gy. The mean supra-linear index values for OSLDfull were 1.001±0.001 for doses from 2 to 10Gy. Small variations in dose sensitivity were obtained for OSLDfull within standard deviations of 0.85% and 0.71%, whereas those of OSLDempty decreased by 2.3% and 4.2% per 10Gy for unfiltered and filtered bleaching devices, respectively. CONCLUSIONS: Under the bleaching conditions determined in this study, clinical dosimetry with OSLDfull is highly stable, minimizing the changes in dose sensitivity or linearity for the clinical dose.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Doses de Radiação , Dosímetros de Radiação , Elétrons , LuminescênciaRESUMO
To investigate the plan quality of tri-Co-60 intensity-modulated radiation therapy (IMRT) with magnetic-resonance image-guided radiation therapy compared with volumetric-modulated arc therapy (VMAT) for prostate cancer. Twenty patients with intermediate-risk prostate cancer, who received radical VMAT were selected. Additional tri-Co-60 IMRT plans were generated for each patient. Both primary and boost plans were generated with tri-Co-60 IMRT and VMAT techniques. The prescription doses of the primary and boost plans were 50.4 Gy and 30.6 Gy, respectively. The primary and boost planning target volumes (PTVs) of the tri-Co-60 IMRT were generated with 3 mm margins from the primary clinical target volume (CTV, prostate + seminal vesicle) and a boost CTV (prostate), respectively. VMAT had a primary planning target volume (primary CTV + 1 cm or 2 cm margins) and a boost PTV (boost CTV + 0.7 cm margins), respectively. For both tri-Co-60 IMRT and VMAT, all the primary and boost plans were generated that 95% of the target volumes would be covered by the 100% of the prescription doses. Sum plans were generated by summation of primary and boost plans. In sum plans, the average values of V70 Gy of the bladder of tri-Co-60 IMRT vs. VMAT were 4.0% ± 3.1% vs. 10.9% ± 6.7%, (p < 0.001). Average values of V70 Gy of the rectum of tri-Co-60 IMRT vs. VMAT were 5.2% ± 1.8% vs. 19.1% ± 4.0% (p < 0.001). The doses of tri-Co-60 IMRT delivered to the bladder and rectum were smaller than those of VMAT while maintaining identical target coverage in both plans.
RESUMO
PURPOSE: To calculate an optimal collimator angle at each of sectional arcs in a full-arc volumetric modulated arc therapy (VMAT) plan and evaluate dosimetric quality of these VMAT plans comparing full-arc VMAT plans with a fixed collimator angle. METHODS: Seventeen patients who had irregularly-shaped target in abdominal, head and neck, and chest cases were selected retrospectively. To calculate an optimal collimator angle at each of sectional arcs in VMAT, integrated MLC apertures which could cover all shapes of target determined by beam's-eye view (BEV) within angular sections were obtained for each VMAT plan. The angular sections were 40°, 60°, 90° and 120°. When the collimator settings were rotated at intervals of 2°, we obtained the optimal collimator angle to minimize area size difference between the integrated MLC aperture and collimator settings with 5 mm-margins to the integrated MLC aperture. The VMAT plans with the optimal collimator angles (Colli-VMAT) were generated in the EclipseTM. For comparison purposes, one full-arc VMAT plans with a fixed collimator angles (Std-VMAT) were generated. The dose-volumetric parameters and total MUs were evaluated. RESULTS: The mean dose-volumetric parameters for target volume of Colli-VMAT were comparable to Std-VMAT. Colli-VMAT improved sparing of most normal organs but for brain stem, compared to Std-VMAT for all cases. There were decreasing tendencies in mean total MUs with decreasing angular section. The mean total MUs for Colli-VMAT with the angular section of 40° (434 ± 95 MU, 317 ± 81 MU, and 371 ± 43 MU for abdominal, head and neck, and chest cases, respectively) were lower than those for Std-VMAT (654 ± 182 MU, 517 ± 116 MU, and 533 ± 25 MU, respectively). CONCLUSIONS: For an irregularly-shaped target, Colli-VMAT with the angular section of 40° reduced total MUs and improved sparing of normal organs, compared to Std-VMAT.
Assuntos
Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por Computador/métodos , Humanos , Planejamento da Radioterapia Assistida por Computador/instrumentaçãoRESUMO
PURPOSE: To investigate the dosimetric characteristics of PRESAGEREU dosimeters. METHODS: Commercially available PRESAGEREU dosimeters (size of 10 mm × 10 mm × 45 mm) were divided into two groups, with one of the groups placed at room temperature of 22°C (RT group) and another group placed at low temperature of 10°C (LT group). A total of 3 dosimeters (set of dosimeters) were irradiated at a time, with doses of 1 Gy, 2 Gy, 4 Gy, 8 Gy, 12 Gy, 16 Gy, and 20 Gy, at a nominal dose rate of 400 MU/min at temperature of 22°C. The dosimeters were irradiated three additional times by delivering the same doses as those during the initial irradiations (4 irradiation cycles). Optical density (OD) was assessed using optical CT scanning. RESULTS: Considering both linearity and sensitivity of the OD curves, R2 above 0.95 and sensitivity above 0.04 ΔOD/Gy were observed at the 1st irradiation (reading time ≤ 6 h) and 2nd irradiation (reading time = 0.5 h) for the RT group. For the LT group, those values were observed at the 1st irradiation (reading time ≤ 2 h), and the 3rd and 4th irradiations (both reading times = 0.5 h). Considering the reproducibility of signals in response to the same dose, dosimeters in the RT group showed average deviations among dosimeters less than 5% (the 1st and 2nd irradiations at the reading time of 0.5 h), while for dosimeters in the LT group showed average deviations among dosimeters less than 6% (the 3rd and 4th irradiations at the reading time of 0.5 h). For the rest, the OD curves were not linear, sensitivities of the dosimeters were lower than 0.04 ΔOD/Gy, and OD deviations at the same dose were larger than 6%. CONCLUSIONS: At room temperature, PRESAGEREU dosimeters could be used for dose measurement only for up to two dose measurement sessions. At low temperatures, usage of PRESAGEREU dosimeters for dose measurement seems to be possible from the 3rd irradiation. When reusing PRESAGEREU dosimeters, the OD curve should be re-defined for every measurement session because the shape of this curve depends on the irradiation history.
Assuntos
Radiometria/instrumentação , Tomografia de Coerência Óptica/métodos , Relação Dose-Resposta à Radiação , Desenho de Equipamento , Humanos , Tomografia ÓpticaRESUMO
To report a single-institution experience of gamma evaluations with 2%/1 mm for stereotactic ablative radiotherapy (SABR) delivered with volumetric modulated arc therapy (VMAT) technique, from January 2014 to January 2016. A total of 168 SABR VMAT plans were analyzed with a gamma criterion of 2%/1 mm, a threshold value of 10%, and a tolerance level of 90%. Of the 168 cases, four cases failed with 2%/1 mm. The average passing rate was 97.0% ± 2.5%. Three of the four failed cases showed passing rates higher than 90%, which was achieved by shifting the measuring device by 1 mm in the left-to-right or anterior-to-posterior directions. One failed case showed a passing rate higher than 90%, which was achieved by changing the threshold value from 10% to 5%, leading to an increase in the number of tested points from 26 to 51. Concerns regarding the high susceptibility of the gamma criterion of 2%/1 mm to setup errors of the measuring device are unnecessary based on our two-year experience, since only four cases failed with the 2%/1 mm from a total of 168 clinical cases. Therefore, the gamma criterion of 2%/1 mm could be successfully applied in the clinic with its high sensitivity to detect errors in VMAT plans.
RESUMO
PURPOSE: The aim of this study was to assess the feasibility and advantages of a patient-specific breast bolus made using a 3D printer technique. METHODS: We used the anthropomorphic female phantom with breast attachments, which volumes are 200, 300, 400, 500 and 650 cc. We simulated the treatment for a right breast patient using parallel opposed tangential fields. Treatment plans were used to investigate the effect of unwanted air gaps under bolus on the dose distribution of the whole breast. The commercial Super-Flex bolus and 3D-printed polylactic acid (PLA) bolus were applied to investigate the skin dose of the breast with the MOSFET measurement. Two boluses of 3 and 5 mm thicknesses were selected. RESULTS: There was a good agreement between the dose distribution for a virtual bolus generated by the TPS and PLA bolus. The difference in dose distribution between the virtual bolus and Super-Flex bolus was significant within the bolus and breast due to unwanted air gaps. The average differences between calculated and measured doses in a 200 and 300 cc with PLA bolus were not significant, which were -0.7% and -0.6% for 3mm, and -1.1% and -1.1% for 5 mm, respectively. With the Super-Flex bolus, however, significant dose differences were observed (-5.1% and -3.2% for 3mm, and -6.3% and -4.2% for 5 mm). CONCLUSION: The 3D-printed solid bolus can reduce the uncertainty of the daily setup and help to overcome the dose discrepancy by unwanted air gaps in the breast cancer radiation therapy.
Assuntos
Neoplasias da Mama/radioterapia , Impressão Tridimensional , Radioterapia Conformacional/métodos , Mama/patologia , Neoplasias da Mama/patologia , Feminino , Humanos , Poliésteres , Doses de Radiação , Pele/efeitos da radiaçãoRESUMO
While the assessment of CT noise constitutes an important task for the optimization of scan protocols in clinical routine, the majority of noise measurements in practice still rely on manual operation, hence limiting their efficiency and reliability. This study presents an algorithm for the automated measurement of CT noise in patient images with a novel structure coherence feature. The proposed algorithm consists of a four-step procedure including subcutaneous fat tissue selection, the calculation of structure coherence feature, the determination of homogeneous ROIs, and the estimation of the average noise level. In an evaluation with 94 CT scans (16 517 images) of pediatric and adult patients along with the participation of two radiologists, ROIs were placed on a homogeneous fat region at 99.46% accuracy, and the agreement of the automated noise measurements with the radiologists' reference noise measurements (PCC = 0.86) was substantially higher than the within and between-rater agreements of noise measurements (PCCwithin = 0.75, PCCbetween = 0.70). In addition, the absolute noise level measurements matched closely the theoretical noise levels generated by a reduced-dose simulation technique. Our proposed algorithm has the potential to be used for examining the appropriateness of radiation dose and the image quality of CT protocols for research purposes as well as clinical routine.