Robust Zinc Anode Enabled by Sulfonate-Rich MOF-Modified Separator.

Aqueous zinc ion batteries (ZIBs) hold great promise for large-scale energy storage; however, severe zinc dendritic growth and side reactions on the anode dramatically impede their commercial application. Herein, a Zr-based MOF (UiO-66) functionalized with a high density of sulfonic acid (─SO3 H) groups is used to modify the glass fiber (GF) separator of ZIBs, providing a unique solution for stabilizing Zn anode. Benefiting from the strong interaction between zincophilic -SO3 H and Zn2+ , this sulfonate-rich UiO-66 modified GF (GF@UiO-S2) separator not only guarantees the homogeneous distribution of ion flux, but also accelerates the ion migration kinetics. Hence, the GF@UiO-S2 separator promotes uniform Zn plating/stripping on the Zn anode and facilitates the desolvation of hydrated Zn2+ ions at the interface, which helps guide dendrite-free Zn deposition and inhibit undesired side reactions. Accordingly, the Zn||Zn symmetric cell with this separator achieves excellent cycling stability with a long cycle life exceeding 3450 h at 3 mA cm-2 . Besides, the Zn||MnO2 full cell paired with this separator delivers remarkable cyclability with 90% capacity retention after 1200 cycles. This design of metal-organic frameworks functionalized separators provides a new insight for constructing highly robust ZIBs.

Efficient Lead Removal by Assembly of Bio-Derived Ellagate Framework, Which Enables Electrocatalytic Reduction of CO2 to Formate.

Lead (Pb) poisoning and CO2-induced global warming represent two exemplary environmental and energy issues threatening humanity. Various biomass-derived materials are reported to take up Pb and convert CO2 electrochemically into low-valent carbon species, but these works address the problems separately rather than settle the issues simultaneously. In this work, cheap, natural ellagic acid (EA) extracted from common plants is adopted to assemble a stable metal-organic framework (MOF), EA-Pb, by effective capture of Pb2+ ions in an aqueous medium (removal rate close to 99%). EA-Pb represents the first structurally well-defined Pb-based MOF showing selective electrocatalytic CO2-to-HCOO- conversion with Faradaic efficiency (FE) of 95.37% at -1.08 V versus RHE. The catalytic mechanism is studied by 13CO2 labeling, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and theoretical calculation. The use of EA-Pb as an electrocatalyst for CO2 reduction represents a 2-in-1 solution of converting detrimental wastes (Pb2+) as well as natural resources (EA) into wealth (electrocatalytic EA-Pb) for addressing the global warming issue.

Utilizing Metal-Thiocatecholate Functionalized UiO-66 Framework for Photocatalytic Hydrogen Evolution Reaction.

Exploiting clean energy is essential for sustainable development and sunlight-driven photocatalytic water splitting represents one of the most promising approaches toward this goal. Metal-organic frameworks (MOFs) are competent photocatalysts owing to their tailorable functionality, well-defined structure, and high porosity. Yet, the introduction of the unambiguous metal-centered active site into MOFs is still challenging since framework motifs capable of anchoring metal ions firmly are lacking. Herein, the assembly using 1,4-dicarboxylbenzene-2,3-dithiol (H2 dcbdt) and Zr-Oxo clusters to give a thiol-functionalized UiO-66 type framework, UiO-66-dcbdt, is reported. The thiocatechols on the struts are allowed to capture transition metal (TM) ions to generate UiO-66-dcbdt-M (M  = Fe, Ni, Cu) with unambiguous metal-thiocatecholate moieties for photocatalytic hydrogen evolution reaction (HER). UiO-66-dcbdt-Cu is found the best catalyst exhibiting an HER rate of 4.18 mmol g-1  h-1  upon irradiation with photosensitizing Ru-polypyridyl complex. To skip the use of the external sensitizer, UiO-66-dcbdt-Cu is heterojunctioned with titanium dioxide (TiO2 ) and achieves an HER rate of 12.63 mmol g-1  h-1  (32.3 times that of primitive TiO2 ). This work represents the first example of MOF assembly employing H2 dcbdt as the mere linker followed by chelation with TM ions and undoubtedly fuels the rational design of MOF photocatalysts bearing well-defined active sites.

Cyclization, Decyclization, and Metallacyclization of Pyridine-Substituted Homopropargylic Alcohols on Ruthenium(II) and Osmium(II) Centers.

Systematic investigations on the reactions between cis-[M(dppm)2 Cl2 ] (M=Ru/Os; dppm=1,1-bis(diphenylphosphino)methane) and pyridine/quinoline substituted homopropargylic alcohols uncovered the diverse Ru(II)/Os(II)-induced alkyne activation pathways. The alkynes underwent cyclization on M via a "non-vinylidene" pathway at lower temperatures, resulting in alkenyl intermediates which might further metallacyclize to give metallapyrroloindolizines. Conversely, reactions at higher temperatures induced alkyne cyclization on M via a "vinylidene" pathway, affording cyclic oxacarbene complexes. Additionally, a rare decyclization mechanism was observed during the transformation of a metallacyclization-resistant alkenyl complex into a cyclic oxacarbene complex. DFT calculations were employed to validate the experimental findings. Overall, these results not only provide insights into controlling alkyne activation pathways, but also offer new strategies for preparing metalated heterocyclic and metallacyclic complexes.

Ni(II)-Pyrazolate Framework Bearing a Metalated Schiff-Base Moiety for Electrocatalytic Hydrogen Evolution.

A robust and porous Ni-based metal-organic framework (MOF), NiL1, was assembled from Ni(II) ions and a dipyrazolate linker (L12-). A Ni(II)-anchored MOF catalyst Ni@NiL1-Sal has been successfully prepared by post-synthetic modification (PSM) condensation between NiL1 with salicylaldehyde, followed by chelation of Ni(II) ions by salicylaldimine as a secondary active site. Ni@NiL1-Sal with carbon black was found to exhibit enhanced electrocatalytic hydrogen evolution reaction (HER) performance (the smallest overpotential, 384 mV, and Tafel slope, 87 mV dec-1) when compared with primitive NiL1 and NiL1-Sal. Such improvement in HER highlights the creation of unambiguous secondary active sites as an avenue to the rational design of a functional MOF-based electrocatalyst.

Microenvironment Regulation of Metal-Organic Frameworks to Anchor Transition Metal Ions for the Electrocatalytic Hydrogen Evolution Reaction.

Bearing triazine-centered linkers, three primitive metal-organic frameworks (MOFs) with a Zr6O4 cluster have been prepared as ZrL1 (without any branch), ZrL2 (with -F), and ZrL3 (with -SCH3). The electrocatalytic hydrogen evolution reaction (HER) by their pristine and transition metal-loaded (TM-loaded) forms was studied. It was found that the loading of TM ions could enhance the electrocatalytic power of these TM-loaded MOFs in HER, as reflected by their lower overpotentials and smaller Tafel slopes when compared with primitive MOFs. More importantly, the best electrocatalytic HER performance of ZrL3-TM among all TM-loaded MOFs studied in this work highlights the effective housing of TM ions for unambiguous active sites through cooperative coordination by triazinic N and thioether pendants. This work proposes microenvironment regulation of MOFs as an effective strategy to enhance the electrocatalytic activity of MOF materials.

Ruthenium-Induced Cyclization of Heteroatom-Functionalized Alkynes: Progress, Challenges and Perspectives.

Metal-induced cyclization of functionalized alkynes represents one of the most general approaches to prepare organic heterocycles. Although RuII centers are well-established to promote alkyne to vinylidene rearrangements and many RuII -mediated alkyne cyclizations have been rationalized to be the results of post-vinylidene transformations, recent discoveries indicate that RuII centers can serve as electrophiles and induce alkyne cyclizations without vinylidene intermediacy. In this Minireview, an overview of the RuII -induced cyclization of heteroatom-functionalized alkynes in the last decade is provided, with an emphasis on the discoveries and validations of the unconventional "non-vinylidene-involving" pathways.

Ruthenium-Induced Alkyne Cycloisomerization: Construction of Metalated Heterocycles, Revelation of Unconventional Reaction Pathways, and Exploration of Functional Applications.

While the fascinating chemistry demonstrated by metalated N-heterocyclic carbene (NHC) complexes highlights the significance of metalated heterocyclic chemistry, the development of other metalated heterocycles is falling behind, presumably because of the sparseness of general synthetic methodologies. In this Concept article, the strategy to prepare metalated heterocyclic complexes by metal-induced cycloisomerization of heteroatom-functionalized alkynes is presented. The isolation of and calculations on novel ruthenium complexes bearing chromene, chromone, indole, indoline, indolizine, and indolizinone moieties prepared from reactions between alkynes and ruthenium complexes are discussed, with emphasis on the mechanistic insights into the ruthenium-induced alkyne transformations and applications in material design and drug discovery.

Phosphonium-Ring-Fused Bicyclic Metallafuran Complexes of Ruthenium and Osmium.

Metallafuran complexes with a fused five-membered phosphonium ring were synthesized from reactions between terminal ynones HC≡C(C=O)R and cis-[Ru/Os(dppm)2 Cl2 ] (dppm=1,1-bis(diphenylphosphino)methane). A metal-vinylidene-involving pathway was found to be an energetically feasible formation mechanism for these complexes. These phosphonium-containing metallafurans, like many phosphonium-functionalized drugs, have the ability to induce mitochondrial dysfunction. They also exhibit stronger cytotoxicity against several human cancer cell lines in comparison with their metal precursors and the classic anticancer drug cisplatin. Overall, this work provides structural and mechanistic insights for the rational design of functional metallacycles via activation of alkynes by RuII and OsII centers.

Isolation of a C3-metalated indolizine complex and a phosphonium ring-fused bicyclic metallafuran from the osmium-induced transformation of pyridine-tethered alkynes.

The first C3-metalated indolizine complex was prepared from the reaction between cis-[Os(dppm)2Cl2] (dppm = 1,1-bis(diphenylphosphino)methane) and propargylic pyridine, HC[triple bond, length as m-dash]CC(OH)(2-py)2. A phosphonium ring-fused bicyclic osmafuran complex was also prepared from the reaction between cis-[Os(dppm)2Cl2] and pyridyl ynone, HC[triple bond, length as m-dash]C(C[double bond, length as m-dash]O)(2-py). The formation of these two products revealed the intermediacy of metal-vinylidene species regarding [Os(dppm)2Cl]+-mediated alkyne transformations. Comparison of the d6 transition-metal precursors employed to activate HC[triple bond, length as m-dash]CC(OH)(2-py)2 suggests that precursors with higher π-basicity favor the vinylidene-involving pathway.

Metalated Chromene and Chromone Complexes: pH Switchable Metal-Carbon Bonding Interaction, Photo-triggerable Chromone Delivery Application, and Antioxidative Activity.

The two families of RuII -chromene and -chromone complexes isolated in this work represent the first examples of metalated chromene and chromone complexes synthesized through transition-metal-mediated cyclization of phenol-tethered ynone. These unprecedented metalated heterocyclic compounds exhibit remarkable features, such as pH-switchable metal-carbon bonding interactions, photo-triggerable release of organic chromone upon visible-light irradiation, and superior antioxidative property to their organic analogue (1,4-benzopyrone). These findings not only offer mechanistic insights into metal-induced activation of functionalized alkynes, but also add a new dimension to rational design of antioxidants and photo-responsive drug delivery systems.

2D metal-organic frameworks bearing butterfly-shaped metal-bis(dithiolene) linkers from dithiol-functionalized benzenedicarboxylic acid.

An assembly between 1,4-dicarboxylbenzene-2,3-dithiol (H2dcbdt) and different transition metal ions successfully produced 2D metal-organic frameworks (M-dcbdt, M = Ni, Co or Fe) composed of unprecedented butterfly-shaped metal-bis(dithiolene) (MS4) linkers in one-pot fashion. Such strategy provides easier access to the [MS4]-rich network and lowers the prerequisite to explore their applications.

Easy but Efficient: Facile Approach to Molecule with Theoretically Justified Donor-Acceptor Structure for Effective Photothermal Conversion and Intravenous Photothermal Therapy.

To accelerate the pace in the field of photothermal therapy (PTT), it is urged to develop easily accessible photothermal agents (PTAs) showing high photothermal conversion efficiency (PCE). As a proof-of-concept, hereby a conventional strategy is presented to prepare donor-acceptor (D-A) structured PTAs through cycloaddition-retroelectrocyclization (CA-RE) reaction, and the resultant PTAs give high PCE upon near-infrared (NIR) irradiation. By joint experimental-theoretical study, these PTAs exhibit prominent D-A structure with strong intramolecular charge transfer (ICT) characteristics and significantly twisting between D and A units which account for the high PCEs. Among them, the DMA-TCNQ exhibits the strongest absorption in NIR range as well as the highest PCE of 91.3% upon irradiation by 760-nm LED lamp (1.2 W cm-2). In vitro and in vivo experimental results revealed that DMA-TCNQ exhibits low dark toxicity and high phototoxicity after IR irradiation along with nude mice tumor inhibition up to 81.0% through intravenous therapy. The findings demonstrate CA-RE reaction as a convenient approach to obtain twisted D-A structured PTAs for effective PTT and probably promote the progress of cancer therapies.

Ruthenium(II) and osmium(II) complexes bearing bipyridine and the N-heterocyclic carbene-based C

Ruthenium(II) and osmium(II) complexes [M(C^N^C)(N^N)L](n+) (L = Cl(-), n = 1; L = CH3CN, t-BuNC, n = 2) containing a neutral tridentate N-heterocyclic carbene (NHC)-based pincer ligand, either 2,6-bis(1-butylimidazol-2-ylidene)pyridine (C(1)^N^C(1)) or 2,6-bis(3-butylbenzimidazol-2-ylidene)pyridine (C(2)^N^C(2)), and a neutral 2,2'-bipyridine-type aromatic diimine have been prepared. Investigations into the effects of varying M (Ru and Os), C^N^C, N^N, and L on the structural, electrochemical, absorption, and emission characteristics associated with [M(C^N^C)(N^N)L](n+) are presented. Interestingly, spectroscopic findings and time-dependent density functional theory (TD-DFT) calculations in this work support a dπ(Ru(II)/Os(II)) → π*(N^N) metal-to-ligand charge transfer (MLCT) assignment for the lowest-energy transition in [M(C^N^C)(N^N)L](n+) and not a dπ(Ru(II)/Os(II)) → π*(C^N^C) MLCT assignment. This is in stark contrast to [Ru(tpy)(bpy)Cl](+) and [Os(tpy)(bpy)Cl](+) (tpy = 2,2':6',2″-terpyridine, bpy = 2,2'-bipyridine) for which the lowest-energy transitions are assigned as dπ(Ru/Os) → π*(tpy) MLCT transitions. [Ru(II)(C^N^C)(N^N)L](n+) is emissive with emission maxima of around 600-700 nm observed upon photoexcitation of their dπ(Ru(II)) → π*(N^N) MLCT bands. The electronic structures for [Ru(C^N^C)(N^N)Cl](0) have also been probed by spectroelectrochemistry, electron paramagnetic resonance (EPR) spectroscopy, and DFT calculations, which reveal that the lowest unoccupied molecular orbitals (LUMOs) for [Ru(C^N^C)(N^N)Cl](+) are N^N-based.

Minimalist Design for Solar Energy Conversion: Revamping the π-Grid of an Organic Framework into Open-Shell Superabsorbers.

We apply a versatile reaction to a versatile solid: the former involves the electron-deficient alkene tetracyanoethylene (TCNE) as the guest reactant; the latter consists of stacked 2D honeycomb covalent networks based on the electron-rich ß-ketoenamine hinges that also activate the conjugated, connecting alkyne units. The TCNE/alkyne reaction is a [2 + 2] cycloaddition-retroelectrocyclization (CA-RE) that forms strong push-pull units directly into the backbone of the framework-i.e., using only the minimalist "bare-bones" scaffold, without the need for additional side groups of alkynes or other functions. The ability of the stacked alkyne units (i.e., as part of the honeycomb mass) to undergo such extensive rearrangement highlights the structural flexibility of these covalent organic framework (COF) hosts. The COF solids remain porous, crystalline, and air-/water-stable after the CA-RE modification, while the resulting push-pull units feature distinct open-shell/free-radical character, are strongly light-absorbing, and shift the absorption ends from 590 nm to around 1900 nm (band gaps from 2.17-2.23 to 0.87-0.95 eV), so as to better capture sunlight (especially the infrared region which takes up 52% of the solar energy). As a result, the modified COF materials achieve the highest photothermal conversion performances, holding promise in thermoelectric power generation and solar steam generation (e.g., with solar-vapor conversion efficiencies >96%).

Donor-Acceptor Conjugated Microporous Polymer toward Enhanced Redox Kinetics in Lithium-Sulfur Batteries.

Conjugated microporous polymers (CMPs) with porous structure and rich polar units are favorable for high-performance lithium-sulfur (Li-S) batteries. However, understanding the role of building blocks in polysulfide catalytic conversion is still limited. In this work, two triazine-based CMPs are constructed by electron-accepting triazine with electron-donating triphenylbenzene (CMP-B) or electron-accepting triphenyltriazine (CMP-T), which can grow on a conductive carbon nanotube (CNT) to serve as separator modifiers for Li-S batteries. CMP-B@CNT features faster ion transportation than the counterpart of CMP-T@CNT. More importantly, compared with acceptor-acceptor (A-A) CMP-T, donor-acceptor (D-A) CMP-B possesses a higher degree of conjugation and a narrower band gap, which are conducive to the electron transfer along the polymer skeleton, thus accelerating the sulfur redox kinetics. Consequently, the CMP-B@CNT functional separator endows Li-S cells with an outstanding initial capacity of 1371 mAh g-1 at 0.1 C and favorable cycling stability with a capacity degradation rate of 0.048% per cycle at 1 C for 800 cycles. This work provides insight into the rational design of efficient catalysts for advanced Li-S batteries.

Emissive osmium(II) complexes supported by N-heterocyclic carbene-based C

Osmium(II) complexes containing N-heterocyclic carbene (NHC)-based pincer ligand 1,3-bis(1-methylimidazolin-2-ylidene)phenyl anion (C(1)^C^C(1)) or 1,3-bis(3-methylbenzimidazolin-2-ylidene)phenyl anion (C(2)^C^C(2)) and aromatic diimine (2,2'-bipyridine (bpy), 1,10-phenanthroline (phen), or 4,4'-diphenyl-2,2'-bipyridine (Ph(2)bpy)) in the form of [Os(C^C^C)(N^N)(CO)](+) have been prepared. Crystal structures for these complexes show that the Os-C(NHC) bonds are essentially single (Os-C(NHC) distances = 2.079(5)-2.103(7) Å). Spectroscopic comparisons and time-dependent density functional theory (TD-DFT) calculations suggest that the lowest-energy electronic transition associated with these complexes (λ(max) = 493-536 nm, ε(max) = (5-10) × 10(3) dm(3) mol(-1) cm(-1), solvent = CH(3)CN) originate from a d(π)(Os(II)) → π*(N^N) metal-to-ligand charge transfer transition, where the d(π)(Os(II)) and π*(N^N) levels contain significant contribution from the C^C^C ligands. All these complexes are emissive in the red-spectral region (674-731 nm) with quantum yields of 10(-4)-10(-2) and emission lifetimes of around 1-6 µs. Transient absorption spectroscopy and spectroelectrochemical measurements have also been used to probe the nature of the emissive excited-states. Overall, this joint experimental and theoretical investigation reveals that the C^C^C ligands can be used to modulate the photophysical properties of a [Os(N^N)] core via the formation of the hybrid [Os + C^C^C] frontier orbitals.

Thiol-Containing Metal-Organic Framework-Decorated Carbon Cloth as an Integrated Interlayer-Current Collector for Enhanced Li-S Batteries.

Lithium-sulfur (Li-S) batteries hold great promise for new-generation energy storage technologies owing to their overwhelming energy density. However, the poor conductivity of active sulfur and the shuttle effect limit their widespread use. Herein, a carbon cloth decorated with thiol-containing UiO-66 nanoparticles (CC@UiO-66(SH)2) was developed to substitute the traditional interlayer and current collector for Li-S batteries. One side of CC@UiO-66(SH)2 acts as a current collector to load active materials, while the other side serves as an interlayer to further restrain polysulfide shuttling. This two-in-one integrated architecture endows the sulfur cathode with fast electron/ion transport and efficient chemical confinement of polysulfides. More importantly, rich thiol groups in the pores of UiO-66(SH)2 serve to tether polysulfides by both covalent interactions and lithium bonding. Therefore, the Li-S battery equipped with this integrated interlayer-current collector not only delivers an enhanced specific capability (1209 mAh g-1 at 0.1 C) but also exhibits prominent cycling stability (an attenuation rate of 0.037% per cycle for 1000 cycles at 1 C). Meanwhile, the battery achieves a high discharge capacity of 795 mAh g-1 at a sulfur loading of 3.83 mg cm-2. The new metal-organic framework (MOF)-based electrode material reported in this study undoubtedly provides insights into the exploration of functional MOFs for robust Li-S batteries.

Organic radicals stabilization above 300 °C in Eu-based coordination polymers for solar steam generation.

Organic radicals feature unpaired electrons, and these compounds may have applications in biomedical technology and as materials for solar energy conversion. However, unpaired electrons tend to pair up (to form chemical bonds), making radicals unstable and hampering their applications. Here we report an organic radical system that is stable even at 350 °C, surpassing the upper temperature limit (200 °C) observed for other organic radicals. The system reported herein features a sulfur-rich organic linker that facilitates the formation of the radical centers; on the solid-state level, the molecules are crystallized with Eu(III) ions to form a 3D framework featuring stacks of linker molecules. The stacking is, however, somewhat loose and allows the molecules to wiggle and transform into sulfur-stabilized radicals at higher temperatures. In addition, the resulting solid framework remains crystalline, and it is stable to water and air. Moreover, it is black and features strong broad absorption in the visible and near IR region, thereby enhancing both photothermal conversion and solar-driven water evaporation.

Conjugated crosslinks boost the conductivity and stability of a single crystalline metal-organic framework.

A linker molecule with four pendant thiophene functions was crystallized with Zr(iv) ions to form a semiconductive porous coordination solid (1.1 × 10-5 S cm-1). Oxidative treatment with FeCl3 guests then coupled the thiophene units to form conjugated bridges as covalent crosslinks. The resulting hybrid of a metal-organic framework and conjugated polymer featured robust crystalline order that withstood long-term air exposure and broad pH (from 0 to 12) conditions. Moreover, the homocoupled thiophene units, conjugated through sulfide links (-S-) with the linker backbone, afforded higher electronic conductivity (e.g., >2.2 × 10-3 S cm-1), which is characteristic of conductive polymer prototypes of polythiophene and polyphenylene sulfide. The crosslinked solid also exhibited proton conductivity that could be increased broadly upon H2SO4 treatment (e.g., from 5.0 × 10-7 to 1.6 × 10-3 S cm-1).