Breeding effects on canopy light attenuation in maize: a retrospective and prospective analysis.

The light attenuation process within a plant canopy defines energy capture and vertical distribution of light and nitrogen (N). The vertical light distribution can be quantitatively described with the extinction coefficient (k), which associates the fraction of intercepted photosynthetically active radiation (fPARi) with the leaf area index (LAI). Lower values of k correspond to upright leaves and homogeneous vertical light distribution, increasing radiation use efficiency (RUE). Yield gains in maize (Zea mays L.) were accompanied by increases in optimum plant density and leaf erectness. Thus, the yield-driven breeding programs and management changes, such as reduced row spacing, selected a more erect leaf habit under different maize production systems (e.g., China and the USA). In this study, data from Argentina revealed that k decreased at a rate of 1.1% year-1 since 1989, regardless of plant density and in agreement with Chinese reports (1.0% year-1 since 1981). A reliable assessment of changes in k over time is critical for predicting (i) modifications in resource use efficiency (e.g. radiation, water, and N), improving estimations derived from crop simulation models; (ii) differences in productivity caused by management practices; and (iii) limitations to further exploit this trait with breeding.

Kernel weight contribution to yield genetic gain of maize: a global review and US case studies.

Over the past century of maize (Zea mays L.) breeding, grain yield progress has been the result of improvements in several other intrinsic physiological and morphological traits. In this study, we describe (i) the contribution of kernel weight (KW) to yield genetic gain across multiple agronomic settings and breeding programs, and (ii) the physiological bases for improvements in KW for US hybrids. A global-scale literature review concludes that rates of KW improvement in US hybrids were similar to those of other commercial breeding programs but extended over a longer period of time. There is room for a continued increase of kernel size in maize for most of the genetic materials analysed, but the trade-off between kernel number and KW poses a challenge for future yield progress. Through phenotypic characterization of Pioneer Hi-Bred ERA hybrids in the USA, we determine that improvements in KW have been predominantly related to an extended kernel-filling duration. Likewise, crop improvement has conferred on modern hybrids greater KW plasticity, expressed as a better ability to respond to changes in assimilate availability. Our analysis of past trends and current state of development helps to identify candidate targets for future improvements in maize.

Bottlenecks and opportunities in field-based high-throughput phenotyping for heat and drought stress.

Flowering and grain-filling stages are highly sensitive to heat and drought stress exposure, leading to significant loss in crop yields. Therefore, phenotyping to enhance resilience to these abiotic stresses is critical for sustaining genetic gains in crop improvement programs. However, traditional methods for screening traits related to these stresses are slow, laborious, and often expensive. Remote sensing provides opportunities to introduce low-cost, less biased, high-throughput phenotyping methods to capture large genetic diversity to facilitate enhancement of stress resilience in crops. This review focuses on four key physiological traits and processes that are critical in understanding crop responses to drought and heat stress during reproductive and grain-filling periods. Specifically, these traits include: (i) time of day of flowering, to escape these stresses during flowering; (ii) optimizing photosynthetic efficiency; (iii) storage and translocation of water-soluble carbohydrates; and (iv) yield and yield components to provide in-season yield estimates. Moreover, we provide an overview of current advances in remote sensing in capturing these traits, and discuss the limitations with existing technology as well as future direction of research to develop high-throughput phenotyping approaches. In the future, phenotyping these complex traits will require sensor advancement, high-quality imagery combined with machine learning methods, and efforts in transdisciplinary science to foster integration across disciplines.

Detecting sorghum aphid infestation in grain sorghum using leaf spectral response.

Sorghum aphid, Melanaphis sorghi (Theobald) have become a major economic pest in sorghum causing 70% yield loss without timely insecticide applications. The overarching goal is to develop a monitoring system for sorghum aphids using remote sensing technologies to detect changes in plant-aphid density interactions, thereby reducing scouting time. We studied the effect of aphid density on sorghum spectral responses near the feeding site and on distal leaves from infestation and quantified potential systemic effects to determine if aphid feeding can be detected. A leaf spectrometer at 400-1000 nm range was used to measure reflectance changes by varying levels of sorghum aphid density on lower leaves and those distant to the caged infestation. Our study results demonstrate that sorghum aphid infestation can be determined by changes in reflected light, especially between the green-red range (550-650 nm), and sorghum plants respond systemically. This study serves as an essential first step in developing more effective pest monitoring systems for sorghum aphids, as leaf reflection sensors can be used to identify aphid feeding regardless of infestation location on the plant. Future research should address whether such reflectance signatures can be detected autonomously using small unmanned aircraft systems or sUAS equipped with comparable sensor technologies.

Benefits and trade-offs of replacing inorganic fertilizer by organic substrate in crop production: A global meta-analysis.

Replacing inorganic fertilizer with organic substrate contributes to sustainable agricultural production capacity. However, the effects of organic substitution regimes (OSR) on global crop productivity, soil carbon (C) and nitrogen (N) losses and biofertility as function of environmental variables have not been systematically quantified. Here, we have conducted a meta-analysis of these effects using field data (211 papers with 852 observations) collected around the world. Results indicated that OSR increased crop productivity (3.04 %) and soil biofertility (soil qMBC, qMBN, microbial richness, Shannon and functionality by 11.4 %, 21.1 %, 10.2 %, 3.95 %, and 38.5 %, respectively), and reduced soil N losses (N2O emissions, NH3 volatilization and soil N leaching by 26.5 %, 26.1 %, and 33.8 %, respectively), but increased CO2 emissions (19.4 %), and paddy fields CH4 emissions (41.2 %). N rate was an important factor influencing crop productivity and soil biofertility response to OSR, and crop productivity and soil biofertility had a greater positive response at moderate substitution rates in acid soil and long-term trials, but full substitution significantly decreased crop yield. Furthermore, the increase in soil biofertility and crop yield saturated in ~10-14 and ~ 22 years after organic substrate input. The emissions of CO2, CH4, and N2O significantly increased with increasing substitution rates, while the opposite was true for N leaching. The NH3 volatilization response to OSR presented a positive effect in acidic and coarse texture soil. OSR was more beneficial in mitigating soil C and N loss response (except CO2 emissions) in uplands compared to paddy fields. Therefore, implementation of OSR requires site-specific strategies to better achieve a balance between increasing crop production and reducing environmental benefits. Given that the OSR improvement varies depending on environmental variables, we propose a predictive model to initially assess the potential for OSR improvement. This study will provide scientific guidance on the reasonable application of organic substrate in agroecosystems.

Predicting corn tiller development in restrictive environments can be achieved to enhance defensive management decision tools for producers.

Introduction: While globally appreciated for reliable, intensification-friendly phenotypes, modern corn (Zea mays L.) genotypes retain crop plasticity potential. For example, weather and heterogeneous field conditions can overcome phenotype uniformity and facilitate tiller expression. Such plasticity may be of interest in restrictive or otherwise variable environments around the world, where corn production is steadily expanding. No substantial effort has been made in available literature to predict tiller development in field scenarios, which could provide insight on corn plasticity capabilities and drivers. Therefore, the objectives of this investigation are as follows: 1) identify environment, management, or combinations of these factors key to accurately predict tiller density dynamics in corn; and 2) test outof-season prediction accuracy for identified factors. Methods: Replicated field trials were conducted in 17 diverse site-years in Kansas (United States) during the 2019, 2020, and 2021 seasons. Two modern corn genotypes were evaluated with target plant densities of 25000, 42000, and 60000 plants ha -1. Environmental, phenological, and morphological data were recorded and evaluated with generalized additive models. Results: Plant density interactions with cumulative growing degree days, photothermal quotient, mean minimum and maximum daily temperatures, cumulative vapor pressure deficit, soil nitrate, and soil phosphorus were identified as important predictive factors of tiller density. Many of these factors had stark non-limiting thresholds. Factors impacting growth rates and photosynthesis (specifically vapor pressure deficit and maximum temperatures) were most sensitive to changes in plant density. Out-of-season prediction errors were seasonally variable, highlighting model limitations due to training datasets. Discussion: This study demonstrates that tillering is a predictable plasticity mechanism in corn, and therefore could be incorporated into decision tools for restrictive growing regions. While useful for diagnostics, these models are limited in forecast utility and should be coupled with appropriate decision theory and risk assessments for producers in climatically and socioeconomically vulnerable environments.

A meta-analysis of hairy vetch as a previous cover crop for maize.

Background: The use of hairy vetch (Vicia villosa Roth.) as cover crop is increasing worldwide. Hairy vetch can contribute as a nitrogen (N) source with potential to impact subsequent high N demanding cereals such as maize (Zea mays L.). Contrasting literature results emphasize the need for a global synthesis analysis to quantify changes in maize yield after hairy vetch. Objectives: A meta-analysis was conducted to i) quantify maize yield response to hairy vetch as previous crop, ii) explore hairy vetch influence on fertilized and non-N fertilized maize yields, and iii) assess the tillage and environment factors on maize yield response to hairy vetch. Methods: The global systematic search yielded 23 publications selected by the following criteria, i) hairy vetch dry matter at the end of the season, ii) maize grain yield, and iii) experimental design with (Mzhv) and without (Mzcontrol) hairy vetch treatments. Information such as N fertilization for maize, N accumulation in hairy vetch, organic matter, and tillage before maize sowing were recorded. Hairy vetch effects (effect size) were expressed as a ratio (percentage of grain yield variation in Mzhv/Mzcontrol). Results: Under non-N fertilization (n = 9), results revealed hairy vetch had mostly a positive effect, ranging from 13 to 45% (n = 6). In contrast, N-fertilized maize (n = 20) showed a high chance of neutral effects (n = 12), moderate probability of positive yield impact (7 to 38%, n = 6), and a low likelihood of negative effects (-32 and -17%, n = 2). Notably, maize yields improved by 21-25% when the N accumulation in hairy vetch ranged from 95 to 150 kg ha-1 and N rate from 0 to 120 kg ha-1. Non-N-fertilized maize exhibited a 14% increase in response in no-till systems and a 31% increase with conventional tillage. Conclusion: This study summarizes potential benefits of hairy vetch preceding maize. Yet, the heterogeneous outcomes deserve further exploration in terms of environment and management factors.

From use efficiency to effective use of nitrogen: A dilemma for maize breeding improvement.

Maize (Zea mays L.) breeding is continuously moving forward yield gains for many fields crops, increasing dependency to technology such as high input seed costs and high use of nitrogen (N) fertilizers. For this crop, breeding improvement led to concomitantly enhancing N recovery and uptake but following a similar ratio relative to the plant biomass (W) and nitrogen nutrition index (NNI, as actual to critical N concentration) levels. The aim of this review is to provides new insights related to the true gains of N use efficiency (NUE) for maize over time and to propose new direction to target improvement on the effective use of N. Thus, the increase in fertilizer N for modern hybrids to attain greater yields lead to a greater dependency to N fertilization and potentially increasing the overall environmental risks for N losses associated to this practice. Contrarily to the improvement based on NUE, improving the intrinsic N uptake capacity (more N uptake per unit of biomass) is needed to maximize yield and the effective use of N. These results highlight that crop breeding should refocus to directly target an increase on the effective use of N, increasing the efficiency on using environmental resources while seeking for improving attainable yields. SYNOPSIS: Enhancing resilience of our production systems is critical for food security goals. This review highlights the need of investment on directly targeting improvement of the effective use of N not only to improve efficiency but to reduce the dependency to fertilization and environmental risks.

Post-silking 15N labelling reveals an enhanced nitrogen allocation to leaves in modern maize (Zea mays) genotypes.

Nitrogen (N) metabolism is a major research target for increasing productivity in crop plants. In maize (Zea mays L.), yield gain over the last few decades has been associated with increased N absorption and utilization efficiency (i.e. grain biomass per unit of N absorbed). However, a dynamical framework is still needed to unravel the role of internal processes such as uptake, allocation, and translocation of N in these adaptations. This study aimed to 1) characterize how genetic enhancement in N efficiency conceals changes in allocation and translocation of N, and 2) quantify internal fluxes behind grain N sources in two historical genotypes under high and low N supply. The genotypes 3394 and P1197, landmark hybrids representing key eras of genetic improvement (1990s and 2010s), were grown under high and low N supply in a two-year field study. Using stable isotope 15N labelling, post-silking nitrogen fluxes were modeled through Bayesian estimation by considering the external N (exogenous-N) and the pre-existing N (endogenous-N) supply across plant organs. Regardless of N availability, P1197 exhibited greater exogenous-N accumulated in leaves and cob-husks. This response was translated to a larger amount of N mobilized to grains (as endogenous-N) during grain-filling in this genotype. Furthermore, the enhanced N supply to leaves in P1197 was associated with increased post-silking carbon accumulation. The overall findings suggest that increased N utilization efficiency over time in maize genotypes was associated with an increased allocation of N to leaves and subsequent translocation to the grains.

zmm28 transgenic maize increases both N uptake- and N utilization-efficiencies.

Biotechnology has emerged as a valuable tool in the development of maize (Zea mays L.) hybrids with enhanced nitrogen (N) use efficiency. Recent work has described the positive effects of an increased and extended expression of the zmm28 transcription factor (Event DP202216) on maize yield productivity. In this study, we expand on the previous findings studying maize N uptake and utilization in DP202216 transgenic hybrids compared to wild-type (WT) controls. Isotope 15N labeling demonstrates that DP202216 hybrids have an improved N uptake during late-vegetative stages (inducing N storage in lower leaves of the canopy) and, thus, N uptake efficiency (N uptake to applied N ratio) relative to WT. Through both greater N harvest index and reproductive N remobilization, transgenic plants were able to achieve better N utilization efficiency (yield to N uptake ratio). Our findings suggest the DP202216 trait could open new avenues for improving N uptake and utilization efficiencies in maize.

Environment Characterization in Sorghum (Sorghum bicolor L.) by Modeling Water-Deficit and Heat Patterns in the Great Plains Region, United States.

Environmental characterization for defining the target population of environments (TPE) is critical to improve the efficiency of breeding programs in crops, such as sorghum (Sorghum bicolor L.). The aim of this study was to characterize the spatial and temporal variation for a TPE for sorghum within the United States. APSIM-sorghum, included in the Agricultural Production Systems sIMulator software platform, was used to quantify water-deficit and heat patterns for 15 sites in the sorghum belt. Historical weather data (∼35 years) was used to identify water (WSP) and heat (HSP) stress patterns to develop water-heat clusters. Four WSPs were identified with large differences in the timing of onset, intensity, and duration of the stress. In the western region of Kansas, Oklahoma, and Texas, the most frequent WSP (∼35%) was stress during grain filling with late recovery. For northeast Kansas, WSP frequencies were more evenly distributed, suggesting large temporal variation. Three HSPs were defined, with the low HSP being most frequent (∼68%). Field data from Kansas State University sorghum hybrid yield performance trials (2006-2013 period, 6 hybrids, 10 sites, 46 site × year combinations) were classified into the previously defined WSP and HSP clusters. As the intensity of the environmental stress increased, there was a clear reduction on grain yield. Both simulated and observed yield data showed similar yield trends when the level of heat or water stressed increased. Field yield data clearly separated contrasting clusters for both water and heat patterns (with vs. without stress). Thus, the patterns were regrouped into four categories, which account for the observed genotype by environment interaction (GxE) and can be applied in a breeding program. A better definition of TPE to improve predictability of GxE could accelerate genetic gains and help bridge the gap between breeders, agronomists, and farmers.

Corn yield components can be stabilized via tillering in sub-optimal plant densities.

Introduction: Crop plasticity is fundamental to sustainability discussions in production agriculture. Modern corn (Zea mays L.) genetics can compensate yield determinants to a small degree, but plasticity mechanisms have been masked by breeder selection and plant density management preferences. While tillers are a well-known source of plasticity in cereal crops, the functional trade-offs of tiller expression to the hierarchical yield formation process in corn are unknown. This investigation aimed to further dissect the consequences of tiller expression on corn yield component determination and plasticity in a range of environments from two plant fraction perspectives - i) main stalks only, considering potential functional trade-offs due to tiller expression; and ii) comprehensive (main stalk plus tillers). Methods: This multi-seasonal study considered a dataset of 17 site-years across Kansas, United States. Replicated field trials evaluated tiller presence (removed or intact) in two hybrids (P0657AM and P0805AM) at three target plant densities (25000, 42000, and 60000 plants ha-1). Record of ears and kernels per unit area and kernel weight were collected separately for both main stalks and tillers in each plot. Results: Indicated tiller contributions impacted the plasticity of yield components in evaluated genotypes. Ear number and kernel number per area were less dependent on plant density, but kernel number remained key to yield stability. Although ear number was less related to yield stability, ear source and type were significant yield predictors, with tiller axillary ears as stronger contributors than main stalk secondary ears in high-yielding environments. Discussions: Certainly, managing for the most main stalk primary ears possible - that is, optimizing the plant density (which consequently reduces tiller expression), is desirable to maximize yields. However, the demonstrated escape from the deterministic hierarchy of corn yield formation may offer avenues to reduce corn management dependence on a seasonally variable optimum plant density, which cannot be remediated mid-season.

Climate Change and Management Impacts on Soybean N Fixation, Soil N Mineralization, N2O Emissions, and Seed Yield.

Limited knowledge about how nitrogen (N) dynamics are affected by climate change, weather variability, and crop management is a major barrier to improving the productivity and environmental performance of soybean-based cropping systems. To fill this knowledge gap, we created a systems understanding of agroecosystem N dynamics and quantified the impact of controllable (management) and uncontrollable (weather, climate) factors on N fluxes and soybean yields. We performed a simulation experiment across 10 soybean production environments in the United States using the Agricultural Production Systems sIMulator (APSIM) model and future climate projections from five global circulation models. Climate change (2020-2080) increased N mineralization (24%) and N2O emissions (19%) but decreased N fixation (32%), seed N (20%), and yields (19%). Soil and crop management practices altered N fluxes at a similar magnitude as climate change but in many different directions, revealing opportunities to improve soybean systems' performance. Among many practices explored, we identified two solutions with great potential: improved residue management (short-term) and water management (long-term). Inter-annual weather variability and management practices affected soybean yield less than N fluxes, which creates opportunities to manage N fluxes without compromising yields, especially in regions with adequate to excess soil moisture. This work provides actionable results (tradeoffs, synergies, directions) to inform decision-making for adapting crop management in a changing climate to improve soybean production systems.

Early-season plant-to-plant spatial uniformity can affect soybean yields.

Increased soybean (Glycine max L. Merril) seed costs have motivated interest in reduced seeding rates to improve profitability while maintaining or increasing yield. However, little is known about the effect of early-season plant-to-plant spatial uniformity on the yield of modern soybean varieties planted at reduced seeding rates. The objectives of this study were to (i) investigate traditional and devise new metrics for characterizing early-season plant-to-plant spatial uniformity, (ii) identify the best metrics correlating plant-to-plant spatial uniformity and soybean yield, and (iii) evaluate those metrics at different seeding rate (and achieved plant density) levels and yield environments. Soybean trials planted in 2019 and 2020 compared seeding rates of 160, 215, 270, and 321 thousand seeds ha-1 planted with two different planters, Max Emerge and Exact Emerge, in rainfed and irrigated conditions in the United States (US). In addition, trials comparing seeding rates of 100, 230, 360, and 550 thousand seeds ha-1 were conducted in Argentina (Arg) in 2019 and 2020. Achieved plant density, grain yield, and early-season plant-to-plant spacing (and calculated metrics) were measured in all trials. All site-years were separated into low- (2.7 Mg ha-1), medium- (3 Mg ha-1), and high- (4.3 Mg ha-1) yielding environments, and the tested seeding rates were separated into low (< 200 seeds m-2), medium (200-300 seeds m-2), and high (> 300 seeds m-2) levels. Out of the 13 metrics of spatial uniformity, standard deviation (sd) of spacing and of achieved versus targeted evenness index (herein termed as ATEI, observed to theoretical ratio of plant spacing) showed the greatest correlation with soybean yield in US trials (R2 = 0.26 and 0.32, respectively). However, only the ATEI sd, with increases denoting less uniform spacing, exhibited a consistent relationship with yield in both US and Arg trials. The effect of spatial uniformity (ATEI sd) on soybean yield differed by yield environment. Increases in ATEI sd (values > 1) negatively impacted soybean yields in both low- and medium-yield environments, and in achieved plant densities below 200 thousand plants ha-1. High-yielding environments were unaffected by variations in spatial uniformity and plant density levels. Our study provides new insights into the effect of early-season plant-to-plant spatial uniformity on soybean yields, as influenced by yield environments and reduced plant densities.

Benchmarking Nutraceutical Soybean Composition Relative to Protein and Oil.

The aim of this study was to explore relationships between protein, oil, and seed weight with seed nutraceutical composition, focused on total isoflavone (TI) and total tocopherol (TT) contents across genotypic and environmental combinations in soybean. We conducted a synthesis-analysis of peer-reviewed published field studies reporting TI, TT, protein, oil, and seed weight (n = 1,908). The main outcomes from this synthesis-analysis were: (i) relationship of TI-to-protein concentration was positive, though for the upper boundary, TI decreases with increases in protein; (ii) relationship of TT-to-oil concentration was positive, but inconsistent when oil was expressed in mg per seed; and (iii) as seed weight increased, TI accumulation was less than proportional relative to protein concentration and TT decreased more proportional relative to oil concentration. Association between nutraceuticals and protein, oil, and seed weight for soybean reported in the present study can be used as a foundational knowledge for soybean breeding programs interested on predicting and selecting enhanced meal isoflavone and/or oil tocopherol contents.

A practical guide to estimating the light extinction coefficient with nonlinear models-a case study on maize.

BACKGROUND: The fraction of intercepted photosynthetically active radiation (fPARi) is typically described with a non-linear function of leaf area index (LAI) and k, the light extinction coefficient. The parameter k is used to make statistical inference, as an input into crop models, and for phenotyping. It may be estimated using a variety of statistical techniques that differ in assumptions, which ultimately influences the numerical value k and associated uncertainty estimates. A systematic search of peer-reviewed publications for maize (Zea Mays L.) revealed: (i) incompleteness in reported estimation techniques; and (ii) that most studies relied on dated techniques with unrealistic assumptions, such as log-transformed linear models (LogTLM) or normally distributed data. These findings suggest that knowledge of the variety and trade-offs among statistical estimation techniques is lacking, which hinders the use of modern approaches such as Bayesian estimation (BE) and techniques with appropriate assumptions, e.g. assuming beta-distributed data. RESULTS: The parameter k was estimated for seven maize genotypes with five different methods: least squares estimation (LSE), LogTLM, maximum likelihood estimation (MLE) assuming normal distribution, MLE assuming beta distribution, and BE assuming beta distribution. Methods were compared according to the appropriateness for statistical inference, point estimates' properties, and predictive performance. LogTLM produced the worst predictions for fPARi, whereas both LSE and MLE with normal distribution yielded unrealistic predictions (i.e. fPARi < 0 or > 1) and the greatest coefficients for k. Models with beta-distributed fPARi (either MLE or Bayesian) were recommended to obtain point estimates. CONCLUSION: Each estimation technique has underlying assumptions which may yield different estimates of k and change inference, like the magnitude and rankings among genotypes. Thus, for reproducibility, researchers must fully report the statistical model, assumptions, and estimation technique. LogTLMs are most frequently implemented, but should be avoided to estimate k. Modeling fPARi with a beta distribution was an absent practice in the literature but is recommended, applying either MLE or BE. This workflow and technique comparison can be applied to other plant canopy models, such as the vertical distribution of nitrogen, carbohydrates, photosynthesis, etc. Users should select the method balancing benefits and tradeoffs matching the purpose of the study.

Subsoil-potassium depletion accounts for the nutrient budget in high-potassium agricultural soils.

Continuous potassium (K) removal without replenishment is progressively mining Argentinean soils. Our goals were to evaluate the sensitivity of soil-K to K budgets, quantify soil-K changes over time along the soil profile, and identify soil variables that regulate soil-K depletion. Four on-farm trials under two crop rotations including maize, wheat and soybean were evaluated. Three treatments were compared: (1) control (no fertilizer applied); (2) application of nitrogen, phosphorus, and sulfur fertilizers -NPS-; and (3) pristine condition. After nine years, crops removed from 258 to 556 kg K ha-1. Only two sites showed a decline in the exchangeable-K levels at 0-20 cm but unrelated to K budget. Topsoil exchangeable-K levels under agriculture resulted 48% lower than their pristine conditions, although still above response levels. Both soil exchangeable-K and slowly-exchangeable K vertical distribution patterns (0-100 cm) displayed substantial depletion relative to pristine conditions, mainly concentrated at subsoil (20-100 cm), with 55-83% for exchangeable-K, and 74-95% for slowly-exchangeable-K. Higher pristine levels of exchangeable-K and slowly-exchangeable-K and lower clay and silt contents resulted in higher soil-K depletion. Soil K management guidelines should consider both topsoil and subsoil nutrient status and variables related to soil K buffer capacity.

Crop modeling defines opportunities and challenges for drought escape, water capture, and yield increase using chilling-tolerant sorghum.

Many crop species, particularly those of tropical origin, are chilling sensitive, so improved chilling tolerance can enhance production of these crops in temperate regions. For the cereal crop sorghum (Sorghum bicolor L.), early planting and chilling tolerance have been investigated for >50 years, but the potential value or tradeoffs of this genotype × management change have not been formally evaluated with modeling. To assess the potential of early planted chilling-tolerant grain sorghum in the central US sorghum belt, we conducted CERES-Sorghum simulations and characterized scenarios under which this change would be expected to enhance (or diminish) drought escape, water capture, and yield. We conducted crop growth modeling for full- and short-season hybrids under rainfed systems that were simulated to be planted in very early (April), early (May 15), and normal (June 15) planting dates over 1986-2015 in four locations in Kansas representative of the central US sorghum belt. Simulations indicated that very early planting will generally lead to lower initial soil moisture, longer growing periods, and higher evapotranspiration. Very early planting is expected to extend the growing period by 20% for short- or full-season hybrids, reduce evaporation during fallow periods, and increase plant transpiration in the two-thirds of years with the highest precipitation (mean > 428 mm), leading to 11% and 7% increase grain yield for short- and full-season hybrids, respectively. Thus, in this major sorghum growing region, very early and early planting could reduce risks of terminal droughts, extend seasons, and increase rotation options, suggesting that further development of chilling-tolerant hybrids is warranted.

Retrieving and processing agro-meteorological data from API-client sources using R software.

OBJECTIVES: The main purpose of this publication is to help users (students, researchers, farmers, advisors, etc.) of weather data with agronomic purposes (e.g. crop yield forecast) to retrieve and process gridded weather data from different Application Programming Interfaces (API client) sources using R software. DATA DESCRIPTION: This publication consists of a code-tutorial developed in R that is part of the data-curation process from numerous research projects carried out by the Ciampitti's Lab, Department of Agronomy, Kansas State University. We make use of three weather databases for which specific libraries were developed in R language: (i) DAYMET (Thornton et al. in https://daymet.ornl.gov/ , 2019; https://github.com/bluegreen-labs/daymetr ), (ii) NASA-POWER (Sparks in J Open Source Softw 3:1035, 2018; https://github.com/ropensci/nasapower ), and (iii) Climate Hazards Group InfraRed Precipitation with Station Data (CHIRPS) (Funk et al. in Sci Data 2:150066, 2015; https://github.com/ropensci/chirps ). The databases offer different weather variables, and vary in terms of spatio-temporal coverage and resolution. The tutorial shows and explain how to retrieve weather data from multiple locations at once using latitude and longitude coordinates. Additionally, it offers the possibility to create relevant variables and summaries that are of agronomic interest such as Shannon Diversity Index (SDI) of precipitation, abundant and well distributed rainfall (AWDR), growing degree days (GDD), crop heat units (CHU), extreme precipitation (EPE) and temperature events (ETE), reference evapotranspiration (ET0), among others.

XPolaris: an R-package to retrieve United States soil data at 30-meter resolution.

OBJECTIVES: This data article aims to introduce the "XPolaris" R-package, designed to facilitate access to detailed soil data at any geographical location within the contiguous United States (CONUS). Without the need of advanced R-programming skills, XPolaris enables users to convert raster data from the POLARIS database into traditional spreadsheet format [i.e., Comma-Separated Values (CSV)] for further data analyses. DATA DESCRIPTION: The core of this publication is a code-tutorial envisioned to assist users in retrieving soil raster data within the CONUS. All data is sourced from the POLARIS database, a 30-m probabilistic map of soil series and different soil properties [Chaney et al. Geoderma 274:54, 2016, Chaney et al. Water Resour Res 55:2916, 2019]. POLARIS represents an optimization of the Soil Survey Geographic (SSURGO) database, circumventing issues of spatial disaggregation, harmonizing, and filling spatial gaps. POLARIS was constructed using a machine learning algorithm, the Disaggregation and Harmonisation of Soil Map Units Through Resampled Classification Trees (DSMART-HPC) [Odgers et al. Geoderma 214:91, 2014]. Although the data is easily accessible in a raster format, retrieving large amounts of data can be time-consuming or require advanced programming skills.