Ln-MOF Based Ratiometric Luminescent Sensor for the Detection of Potential COVID-19 Drugs.

Countless people have been affected by the COVID-19 pandemic on a global scale. Favipiravir, has shown potential as an effective drug for SARS-CoV-2, attracting scientists' attention. However, overuse of Favipiravir easily leads to serious side effects, requiring real-time monitoring in body fluids. Given this, a new lanthanide metal-organic framework (MOF) was prepared under solvothermal conditions from either Eu (Eu-MOF or (1)) or Tb (Tb-MOF or (2)) using the highly delocalized imidazoledicarboxylic acid linker H2 L (H2 L=5-(4-(imidazol-1-yl) phenyl) isophthalic acid) and could be successfully applied to selective optical detection of Favipiravir. In this MOF framework, the organic linker H2 L provides a high excitation energy transfer efficiency that can sensitize luminescence in lanthanides. In addition, through deliberate tuning of Eu/Tb molar ratio and reaction concentration in the lanthanide framework, ratiometric recyclable luminescent Eux Tb1-x -MOF nanoparticles with open metal sites have been constructed, which present a high detection sensitivity (Ksv =1×107 [M-1 ], detection limit is 4.63 nM) for Favipiravir. The detection mechanism is discussed with the help of Density Functional Theory (DFT) calculations that sheds light over the selective sensing of Favipiravir over other related COVID-19 drug candidates. Finally, to explore the practical application of Favipiravir sensing, MOF based thin films have been used for visual detection of Favipiravir and recycled 5 times.

Chloride Binding Modulated by Anion Receptors Bearing Tetrazine and Urea.

Modulation and fine-tuning of the strength of weak interactions to bind anions are described in a series of synthetic receptors. The general design of the receptors includes both a urea motif and a tetrazine motif. The synthetic sequence towards three receptors is detailed. Impacts of H-bond strength and linker length between urea and tetrazine on chloride complexation are studied. Binding properties of the chloride anion are examined in both the ground and excited states using a panel of analytical methods (NMR spectroscopy, mass spectrometry, UV/Visible spectroscopies, and fluorescence). A ranking of the receptors by complexation strength has been determined, allowing a better understanding of the structure-properties relationship on these compounds.

On the Road Toward More Efficient Biocompatible Two-Photon Excitable Fluorophores.

Red-to-NIR absorption and emission wavelengths are key requirements for intravital bioimaging. One of the way to reach such excitation wavelengths is to use two-photon excitation. Unfortunately, there is still a lack of two-photon excitable fluorophores that are both efficient and biocompatible. Thus, we design a series of biocompatible quadrupolar dyes in order to study their ability to be used for live-cell imaging, and in particular for two-photon microscopy. Hence, we report the synthesis of 5 probes based on different donor cores (phenoxazine, acridane, phenazasiline and phenothiazine) and the study of their linear and non-linear photophysical properties. TD-DFT calculations were performed and were able to highlight the structure-property relationship of this series. All these studies highlight the great potential of three of these biocompatible dyes for two-photon microscopy, as they both exhibit high two-photon cross-sections (up to 3650 GM) and emit orange to red light. This potential was confirmed through live-cell two-photon microscopy experiments, leading to images with very high brightness and contrast.

FRET-mediated quenching of BODIPY fluorescent nanoparticles by methylene blue and its application to bacterial imaging.

High resolution and a good signal to noise ratio are a requirement in cell imaging. However, after labelling with fluorescent entities, and after several washing steps, there is often an unwanted fluorescent background that reduces the images resolution. For this purpose, we developed an approach to remove the signal from extra-cellular fluorescent nanoparticles (FNPs) during bacteria imaging, without the need for any washing steps. Our idea is to use methylene blue to quench > 90% of the emission of BODIPY-based fluorescent polymer nanoparticle by a FRET process. This "Hide-and-Seek Game" approach offers a novel strategy to apply fluorescence quenching in bioimaging to improve image accuracy.

Selective population of triplet excited states in heavy-atom-free BODIPY-C60 based molecular assemblies.

Photophysical studies on a BODIPY-fullerene-distyryl BODIPY triad (BDP-C60-DSBDP) and its reference dyads (BODIPY-fullerene; BDP-C60 and distyryl BODIPY-fullerene; DSBDP-C60) are presented herein. In the triad, the association of the two chromophore units linked by a fullerene moiety leads to strong near UV-Visible light absorption from 300 to 700 nm. The triplet-excited state was observed upon visible excitation in all these assemblies, and shown to be localized on the C60 or BODIPY moieties. Using quantitative nanosecond transient absorption, we provide a complete investigation on the lifetime and formation quantum yield of the triplet-excited state. In the BDP-C60 dyad, the triplet excited state of C60 (τ = 7 ± 1 µs) was obtained with a quantum yield of 40 ± 8%. For the DSBDP-C60 dyad and BDP-C60-DSBDP triad, a longer-lived triplet excited state with a lifetime of around 250 ± 20 µs centered on the DSBDP moiety was formed, with respective quantum yields of 37 ± 8 and 20 ± 4%. Triplet-triplet annihilation up-conversion is characterized in the BDP-C60 dyad and the bichromophoric triad in the presence of perylene and DSBDP-monomer as respective annihilators. The photo-induced formation of a long-lived 3DSBDP* in the triad coupled with panchromatic light absorption offers potential applications as a heavy-atom-free organic triplet photosensitizer.

Novel D-A chromophores with condensed 1,2,4-triazine system simultaneously display thermally activated delayed fluorescence and crystallization-induced phosphorescence.

Control of photophysical properties is crucial for the continued development of electroluminescent devices and luminescent materials. Preparation and study of original molecules uncovers design rules towards efficient materials and devices. Here we have prepared 7 new compounds based on the popular donor-acceptor design used in thermally activated delayed fluorescence emitters. We introduce for the first time benzofuro[3,2-e]-1,2,4-triazine and benzothieno[3,2-e]-1,2,4-triazine acceptors which were connected to several common donors: phenoxazine, phenothiazine, carbazole and 3,6-di-tert-butylcarbazole. DFT calculations, and steady-state and time-resolved photophysical studies were conducted in solution and in solid states. While derivatives with azine moieties are non-emissive in any form, the compounds comprising 3,6-di-tert-butylcarbazole display TADF in all cases. More interestingly, the two derivatives substituted with a carbazole donor are TADF active when dispersed in a polymer matrix and phosphorescent at room temperature in neat films (microcrystalline form).

Maximizing Chiral Perturbation on Thermally Activated Delayed Fluorescence Emitters and Elaboration of the First Top-Emission Circularly Polarized OLED.

Molecular designs merging circularly polarized luminescence (CPL) and thermally activated delayed fluorescence (CP-TADF) using the concept of chiral perturbation appeared recently as a cornerstone for the development of efficient CP-organic light emitting diodes (CP-OLED). Such devices could strongly increase the energy efficiency and performances of conventional OLED displays, in which 50% of the emitted light is often lost due to the use of antiglare filters. In this context, herein, ten couples of enantiomers derived from novel chiral emitter designs are reported, exhibiting CPL, TADF, and aggregation induced enhancement emission properties (AIEE). Representing the first structure properties relationship investigation for CP-TADF materials, this thorough experimental and theoretical work highlights crucial findings on the key structural and electronic parameters (isomerism, nature of the carbazole substituents) governing the synergy between CPL and TADF properties. To conclude this study, the first top emission CP-OLED is elaborated as a new approach of generating CP light in comparison with classical bottom-emission CP-OLED architecture. Indeed, the top-emission configuration represents the only relevant device architecture for future microdisplay applications. Thereby, in addition to offer molecular guidelines to combine efficiently TADF and CPL properties, this study opens new avenues toward practical applications for CP-OLEDs.

Intertwined Detection and Recognition Roles of Tetrazine in Synergistic Anion-π and H-bond Based Anion Receptor.

The intrinsic properties of tetrazine as a π-anion receptor and as an on/off recognition probe merged with H-bond ability of an urea motif into a single architecture constitutes a new generation of well-defined anion receptors. Complexation properties directly benefit from the dual and synergistic contribution of tetrazine and urea. In this study, we report on the synthesis and assessment of binding properties to anions of diverse geometries. Association constants have been predicted by theoretical calculations and evaluated by multiple and complementary experimental techniques including electrospray-mass tandem spectroscopy, NMR, UV-visible, steady state fluorescence spectroscopies and time resolved fluorescence. These results provide the basis for a better understanding of both the complexation and the anion-dependent quenching mechanism.

Donor-Acceptor 1,2,4,5-Tetrazines Prepared by the Buchwald-Hartwig Cross-Coupling Reaction and Their Photoluminescence Turn-On Property by Inverse Electron Demand Diels-Alder Reaction.

A facile efficient synthetic tool, Buchwald-Hartwig cross-coupling reaction, for the functionalization of 1,2,4,5-tetrazines is presented. Important factors affecting the Buchwald-Hartwig cross-coupling reaction have been optimized. Seven new donor-acceptor tetrazine molecules (TA1-TA7) were conveniently prepared in good to high yields (61-72%). They have been subsequently engaged in the inverse electron demand Diels-Alder (iEDDA) reaction with cyclooctyne. The photophysical and electrochemical properties of the new pyridazines have been studied. Some are fluorescent acting as turn-on probes. More importantly, two pyridazines (DA3 and DA6) exhibit room-temperature phosphorescence (RTP) properties.

Convenient One-Pot Synthesis of 1,2,3,4-Thiatriazoles Towards a Novel Electron Acceptor for Highly-Efficient Thermally-Activated Delayed-Fluorescence Emitters.

A novel and unexpected convenient one-pot synthesis of 1,2,3,4-thiatriazoles has been discovered while investigating the classical tetrazine "Pinner synthesis". The synthetic route starts from commercially-available nitrile derivatives and gives good to high yields (51-80 %) with no need to isolate any thioacylating agents. The crucial impact of the solvent on the outcome of the modified "Pinner synthesis" is moreover examined and discussed. Using this new synthetic route, a novel donor-acceptor thiatriazole derivative has been prepared, which exhibits prominent thermally-activated delayed fluorescence (TADF) in both solution and film. The photoluminescence quantum yield (PLQY) in methylcyclohexane (MCH) and Zeonex (a cyclo olefin polymer) in oxygen-free conditions were determined to be 76 and 99 %, respectively. This work provides an efficient and practical synthetic approach to functionalized 1,2,3,4-thiatriazole derivatives, and will noticeably facilitate the application of 1,2,3,4-thiatriazole as an electron acceptor in organic electronics.

Core-shell polymeric nanoparticles comprising BODIPY and fluorescein as ultra-bright ratiometric fluorescent pH sensors.

A new ratiometric fluorescent pH nanosensor is presented. It is based on ultrabright nanoparticles containing two spatially separated fluorophores: BODIPY covalently linked to the polystyrene core and fluorescein grafted to the nanoparticle shell. The nanoparticles comprise a large number (≥2500) of both fluorescent moieties. Their spectroscopic characteristics were studied at different pH and ionic strength. They could successfully be used to determine the solution pH between 5.5 and 7.5 by measuring the fluorescence intensity ratio of the sensor molecule (fluorescein) relative to the reference dye (BODIPY).

Fluorescent Zr(IV) Metal-Organic Frameworks Based on an Excited-State Intramolecular Proton Transfer-Type Ligand.

We report here the preparation of a series of Zr(IV) metal-organic frameworks (MOFs) of the MIL-140 structure type incorporating a ligand exhibiting an intense excited-state intramolecular proton transfer (ESIPT) fluorescence. These solids were obtained by systematically varying the substitution rate of 4,4'-biphenyldicarboxylate by 2,2'-bipyridine-3,3'-diol-5,5'-dicarboxylate, and they were thoroughly characterized by complementary techniques, including high-resolution powder X-ray diffraction, solid-state NMR spectroscopy, nitrogen sorption experiments, and time-resolved fluorescence. We show that the incorporation of the ESIPT-type ligand induces an increase of the hydrophilicity, leading ultimately to a higher sensitivity toward hydrolysis, a phenomenon rarely observed in this structure type, which is considered as one of the most stable among the Zr carboxylate MOFs. Eventually, optimization of the amount of fluorescent ligand within the structure allowed combining a decent microposity ( SBET > 750 m2·g-1) and a high stability even in boiling water, together with a high fluorescence quantum yield (>30%).

Topology and Electronic Density Driven Generation of Alkali Cation Complexes.

The formation and characterization of K+ and Cs+ complexes originating from the cooperativity of three non-covalent interactions is explored. The tridimensional preorganization of the naphthothiophene platform displays a favorable well-defined bay region combining a π fragment and a carbonyl moiety flanking a central sulfur atom. A joint theoretical and experimental infrared multiple photon dissociation (IRMPD) study allowed deciphering the key contribution of the orthogonal phenyl fragment to the elaboration of alkali metal complexes. In combination with S and CO interactions, the π-cation interaction significantly enhances the binding energies of naphthothiophene derivatives.

Metal-Free Synthetic Approach to 3-Monosubstituted Unsymmetrical 1,2,4,5-Tetrazines Useful for Bioorthogonal Reactions.

A facile, efficient and metal-free synthetic approach to 3-monosubstituted unsymmetrical 1,2,4,5-tetrazines is presented. Dichloromethane (DCM) is for the first time recognized as a novel reagent in the synthetic chemistry of tetrazines. Using this novel approach 11 3-aryl/alkyl 1,2,4,5-tetrazines were prepared in excellent yields (up to 75 %). The mechanism of this new reaction, including the role of DCM in the tetrazine ring formation, has been investigated by 13 C labeling of DCM, and is also presented and discussed as well as the photophysical and electrochemical properties.

A Flexible Fluorescent Zr Carboxylate Metal-Organic Framework for the Detection of Electron-Rich Molecules in Solution.

A novel Zr(IV) dicarboxylate metal organic framework (MOF) built up from an s-tetrazine derived ligand was prepared. This solid, which exhibits a diamond type network, combines a good stability in water, a structural flexibility, and fluorescence properties thanks to the organic ligand. It is noteworthy that this fluorescence is quenched when exposed to electron-rich molecules in solution, such as amines or phenol, this phenomenon being associated with the adsorption of the quencher, as unambiguously proven by X-ray diffraction (XRD) analysis. Finally, the quenching efficiency is shown to be governed not only by electronic and steric factors but also by the relative polarity of the solvent, the MOF, and the quencher. This work thus suggests that it is possible to develop new MOF-based sensors presenting in a given medium (such as water) highly selective responses.

Design and Synthesis of New Circularly Polarized Thermally Activated Delayed Fluorescence Emitters.

This work describes the first thermally activated delayed fluorescence material enabling circularly polarized light emission through chiral perturbation. These new molecular architectures obtained through a scalable one-pot sequential synthetic procedure at room temperature (83% yield) display high quantum yield (up to 74%) and circularly polarized luminescence with an absolute luminescence dissymmetry factor, |glum|, of 1.3 × 10(-3). These chiral molecules have been used as an emissive dopant in an organic light emitting diode exhibiting external quantum efficiency as high as 9.1%.

Sequential Copper-Catalyzed Alkyne-Azide Cycloaddition and Thiol-Maleimide Addition for the Synthesis of Photo- and/or Electroactive Fullerodendrimers and Cysteine-Functionalized Fullerene Derivatives.

In this study, the functionalization of a fullerene building block in a stepwise process by means of the copper-catalyzed alkyne-azide cycloaddition (CuAAC) and thiol-maleimide reactions is reported. Grafting of the fullerene platform with a variety of azido derivatives, including Bodipy, pyrene and ferrocene, was carried out first. These fullerene compounds were then reacted with thiol derivatives to yield sophisticated structures comprising photo- and/or electroactive fullerodendrimers and cysteine-functionalized fullerene assemblies. This strategy, which combines the CuAAC and thiol-maleimide processes, could become more widely adopted in the field of fullerene chemistry.

Synthesis and Characterization of New Fluorinated Tetrazines Displaying a High Fluorescence Yield.

Following the case of tetrazines substituted with perfluorinated alkyl chains, separated by two methylene groups from the tetrazine core, a new series of analogous tetrazines, but featuring only one methylene group between the fluorescent core and the perfluorinated chain, have been synthesized, and their photo-physical properties investigated. Their fluorescence quantum yields in acetonitrile are in same range than chloroalkoxytetrazines, which make them interesting candidates for light emission. Surprisingly, the quantum yields are lower with one methylene group, rather than two methylene groups separating the fluorinated chain from the emitting core, in the case of unsymmetrical compounds, while they are superior in the case of symmetrical ones. This unusual observation is discussed in the article.

Redox- and protonation-induced fluorescence switch in a new triphenylamine with six stable active or non-active forms.

The synthesis, photophysical and electrochemical properties as well as theoretical calculation studies of a newly designed triphenylamine derivative are described. This original compound displays one neutral form, three oxidized forms, and two protonated forms with distinct photophysical characteristics. The interplay of the emission with the protonation or the redox state (electrofluorochromism) has been explored and an on-off-on-off fluorescence switching was observed in the case of oxidation and an on-on-off fluorescence switching in the case of protonation.

A Robust Infinite Zirconium Phenolate Building Unit to Enhance the Chemical Stability of Zr MOFs.

A novel Zr-chain based MOF, namely MIL-163, was designed and successfully synthesized using a bis-1,2,3-trioxobenzene ligand. Endowed with large square-shaped channels of 12 Šwidth, it shows remarkable water uptake (ca. 0.6 cm(3) g(-1) at saturating vapor pressure) and a remarkable stability in simulated physiological media, where archetypical Zr carboxylate MOFs readily degrade.