RESUMO
Characterizing the chemical state and physical disposition of uranium that has persisted over geologic time scales is key for modeling the long-term geologic sequestration of nuclear waste, accurate uranium-lead dating, and the use of uranium isotopes as paleo redox proxies. X-ray absorption spectroscopy coupled with molecular dynamics modeling demonstrated that pentavalent uranium is incorporated in the structure of 1.6 billion year old hematite (α-Fe2O3), attesting to the robustness of Fe oxides as waste forms and revealing the reason for the great success in using hematite for petrogenic dating. The extreme antiquity of this specimen suggests that the pentavalent state of uranium, considered a transient, is stable when incorporated into hematite, a ubiquitous phase that spans the crustal continuum. Thus, it would appear overly simplistic to assume that only the tetravalent and hexavalent states are relevant when interpreting the uranium isotopic record from ancient crust and contained ore systems.
Assuntos
Urânio , Compostos Férricos/química , Oxirredução , Urânio/química , Espectroscopia por Absorção de Raios XRESUMO
Iron oxychloride (FeOCl) has been reported to be a highly efficient heterogeneous Fenton catalyst over a wide pH range. In order to determine the true catalytic performance of FeOCl, we simultaneously quantified the adsorptive and oxidative removal of formate, oxalate, and rhodamine-B (RhB) and the formation of RhB oxidation products at both pH 4.0 and 7.0. FeOCl was found to be a poor Fenton catalyst at either pH, as gauged by the oxidation of formate, oxalate, and rhodamine B and the decomposition of H2O2, in comparison with ferrihydrite (Fhy), one of the most common Fe-containing Fenton catalysts. The adsorption of target contaminants to FeOCl and homogeneous Fenton processes, induced by dissolved iron, resulted in overevaluation of the catalytic performance of FeOCl, especially for (i) the use of strongly adsorbing target compounds, without consideration of the role of adsorption in their removal and (ii) exceedingly high concentrations of H2O2 to remove trace quantities of target contaminants. Overall, this study highlights that the systematic quantification of H2O2 decomposition, target compound adsorption, and oxidation as well as the concentrations of oxidized products formed are prerequisites for unequivocal elucidation of the catalytic nature and reaction mechanism of solid Fenton catalysts.
Assuntos
Peróxido de Hidrogênio , Compostos de Ferro , Catálise , Ferro , OxirreduçãoRESUMO
The formation of vivianite (Fe3(PO4)2·8H2O) in iron (Fe)-dosed wastewater treatment facilities has the potential to develop into an economically feasible method of phosphorus (P) recovery. In this work, a long-term steady FeIII-dosed University of Cape Town process-membrane bioreactor (UCT-MBR) system was investigated to evaluate the role of Fe transformations in immobilizing P via vivianite crystallization. The highest fraction of FeII, to total Fe (Fetot), was observed in the anaerobic chamber, revealing that a redox condition suitable for FeIII reduction was established by improving operational and configurational conditions. The supersaturation index for vivianite in the anaerobic chamber varied but averaged â¼4, which is within the metastable zone and appropriate for its crystallization. Vivianite accounted for over 50% of the Fetot in the anaerobic chamber, and its oxidation as it passed through the aerobic chambers was slow, even in the presence of high dissolved oxygen concentrations at circumneutral pH. This study has shown that the high stability and growth of vivianite crystals in oxygenated activated sludge can allow for the subsequent separation of vivianite as a P recovery product.
Assuntos
Ferro , Fósforo , Compostos Ferrosos , Fosfatos , Esgotos , Eliminação de Resíduos LíquidosRESUMO
While flow-electrode CDI is a promising desalination technology that has major advantages when the electrodes are operated in the short-circuited closed-cycle (SCC) mode, little attention has been paid to the water recovery rate, which, in the SCC mode, is determined by the need for partial replacement of the saline electrolyte of the flow electrodes. Results of this study show that an extremely high water recovery rate of â¼95% can be achieved when desalting a 1000 mg NaCl L-1 brackish influent to a potable level of 150 mg L-1. The improved performance with regard to the electrical cost is related, at least in part, to the alleviated concentration polarization at the membrane/electrolyte interface during electrosorption. In effect, the current efficiency decreases with an increase in the water recovery rate. This finding is ascribed to inevitable co-ion leakage since the flow electrodes reject ions with the same charge. In addition, water transport across the ion exchange membranes also influences the water recovery rate. The effect of partial replacement of the saline electrolyte during (semi-)continuous operation requires particular consideration because the associated dilution of the carbon content in the flow electrodes results in a decrease in process performance.
Assuntos
Purificação da Água , Água , Adsorção , Eletrodos , Troca IônicaRESUMO
Unacceptably high uranium concentrations in decentralized and remote potable groundwater resources, especially those of high hardness (e.g ., high Ca2+, Mg2+, and CO32- concentrations), are a common worldwide problem. The complexation of alkali earth metals, carbonate, and uranium(VI) results in the formation of thermodynamically stable ternary aqueous species that are predominantly neutrally charged (e.g ., Ca2(UO2)(CO3)30). The removal of the uncharged (nonadsorbing) complexes is a problematic issue for many water treatment technologies. As such, we have evaluated the efficacy of a recently developed electrochemical technology, termed flow-electrode capacitive deionization (FCDI), to treat a synthetic groundwater, the composition of which is comparable to groundwater resources in the Northern Territory, Australia (and elsewhere worldwide). Theoretical calculations and time-resolved laser fluorescence spectroscopy analyses confirmed that Ca2(UO2)(CO3)30 was the primary aqueous species followed by Ca(UO2)(CO3)32- (at circumneutral pH values). Results under different operating conditions demonstrated that FCDI is versatile in reducing uranium concentrations to <10 µg L-1 with low electrical consumption (e.g ., â¼0.1 kWh m-3). It is concluded that the capability of FCDI to remove uranium under these common conditions depends on the dissociation kinetics of the Ca2(UO2)(CO3)30 complex in the electrical field. The subsequent formation of the negatively charged Ca(UO2)(CO3)32- species results in the efficient transport of uranium across the anion exchange membrane followed by immobilization on the positively charged flow (anode) electrode.
Assuntos
Água Subterrânea , Urânio , Adsorção , Austrália , EletrodosRESUMO
The inorganic core of the iron storage protein, ferritin, is recognized as being analogous to the poorly crystalline iron mineral, ferrihydrite (Fh). Fh is also abundant in soils where it is central to the redox cycling of particular soil contaminants and trace elements. In geochemical circles, it is recognized that Fh can undergo Fe(II)-catalyzed transformation to form more crystalline iron minerals, vastly altering the reactivity of the iron oxide and, in some cases, the redox poise of the system. Of relevance to both geochemical and biological systems, we investigate here if the naturally occurring reducing agent, ascorbate, can effect such an Fe(II)-catalyzed transformation of Fh at 25⯰C and circumneutral pH. The transformation of ferrihydrite to possible secondary Fe(III) mineralization products was quantified using Fourier transform infrared (FTIR) spectroscopy, with supporting data obtained using X-ray absorbance spectroscopy (XAS) and X-ray diffraction (XRD). Whilst the amount of Fe(II) formed in the presence of ascorbate has resulted in Fh transformation in previous studies, no transformation of Fh to more crystalline Fe(III) (oxyhydr)oxides was observed in this study. Further experiments indicated this was due to the ability of ascorbate to inhibit the formation of goethite, lepidocrocite and magnetite. The manner in which ascorbate associated with Fh was investigated using FTIR and total organic carbon (TOC) analysis. The majority of ascorbate was found to adsorb to the Fh surface under anoxic conditions but, under oxic conditions, ascorbate was initially adsorbed then became incorporated within the Fe(III) (oxyhydr)oxide structure (i.e., co-precipitated) over time.
Assuntos
Antioxidantes/química , Ácido Ascórbico/química , Compostos Férricos/química , Ferro/química , Minerais/química , Antioxidantes/análise , Ácido Ascórbico/análise , Catálise , OxirreduçãoRESUMO
Nanoscale zerovalent iron (NZVI) is one of the most extensively studied nanomaterials in the fields of wastewater treatment and remediation of soil and groundwater. However, rapid oxidative transformations of NZVI can result in reduced NZVI reactivity. Indeed, the surface passivation of NZVI is considered one of the most challenging aspects in successfully applying NZVI to contaminant degradation. The oxidation of NZVI can lead to the formation of FeII-bearing phases (e.g., FeIIO, FeII(OH)2, FeIIFeIII2O4) on the NZVI surface or complete oxidation to ferric (oxyhydr)oxides (e.g., FeIIIOOH). This corrosion phenomenon is dependent upon various factors including the composition of NZVI itself, the type and concentration of aqueous species, reaction time and oxic/anoxic environments. As such, the coexistence of different Fe oxidation states on NZVI surfaces may also, in some instances, provide a unique reactive microenvironment to promote the adsorption of contaminants and their subsequent transformation via redox reactions. Thus, an understanding of passivation chemistry, and its related mechanisms, is essential not only for effective NZVI application but also for accurately assessing the positive and negative effects of NZVI surface passivation. The aim of this review is to discuss the nature of the passivation processes that occur and the passivation byproducts that form in various environments. In particular, the review presents: (i) the strengths and limitations of state-of-the-art techniques (e.g., electron microscopies and X-ray-based spectroscopies) to identify passivation byproducts; (ii) the passivation mechanisms proposed to occur in anoxic and oxic environments; and (iii) the effects arising from synthesis procedures and the presence of inorganics/organics on the nature of the passivation byproducts that form. In addition, several depassivation strategies that may assist in increasing and/or maintaining the reactivity of NZVI are considered, thereby enhancing the effectiveness of NZVI in contaminant degradation.
Assuntos
Água Subterrânea , Poluentes Químicos da Água , Adsorção , Ferro , OxirreduçãoRESUMO
Iron (oxyhydr)oxides are widespread in natural and engineered systems, potent adsorbents of contaminants and a source of energy for iron-reducing bacteria. Microbial reduction of iron (oxyhydr)oxides results in the formation of Fe(II) which can induce the transformation of these iron minerals, typically from less crystalline to more crystalline forms, affecting the biogeochemical cycling of iron and the behavior of any species adsorbed to the iron (oxyhydr)oxides. Factors influencing the transformation rate of the poorly crystalline iron (oxyhydr)oxide, ferrihydrite, to more crystalline forms in the presence of the iron reducing bacterium Shewanella oneidensis MR-1 are investigated under controlled laboratory conditions in this work. In particular, the amount of Fe(II) produced increased the transformation rate while increasing concentrations of the electron donor, lactate, decreased the rate. Using kinetic parameters determined from abiotic controls, the results of transformation experiments in the presence of Shewanella oneidensis were modeled with this exercise revealing that less goethite and more lepidocrocite formed than expected. Conversely, studies using the Shewanella exudate only, containing biogenic Fe(II), displayed rates of transformation that were satisfactorily modeled using these abiotic control kinetic parameters. This result suggests that the physical presence of the microbes is pivotal to the reduction in ferrihydrite transformation rate observed in the biotic experiments relative to the analogous abiotic controls.
Assuntos
Shewanella , Catálise , Compostos Férricos , Compostos Ferrosos , Cinética , OxirreduçãoRESUMO
The presence of Good's buffers caused rapid ZVI corrosion and a dramatic release of Fe(II) leading to the Fe(II)-catalyzed transformation of ferrihydrite to lepidocrocite and/or the direct formation of lepidocrocite from the oxidation of Fe(II) in the pH range 4.0-6.2. In comparison, in the absence of Good's buffers, elution of Fe(II) was insignificant with ferrihydrite being the only Fe(III) oxyhydroxide detected following the oxidative transformation of ZVI. The rapid ZVI corrosion in the presence of Good's buffer is possibly due to either (i) disruption of the Fe oxide surface layer as a result of attack by Good's buffers and/or (ii) interaction of Good's buffer with the outer Fe oxide surface and surface-associated Fe(II)/Fe(III) causing the Fe oxide surface layers to be more porous with both these processes facilitating continuous O2 access to the Fe(0) core and allowing the diffusion of Fe atoms outward. Our results further show that the deprotonated forms of Good's buffers and the surface charge of the Fe oxides formed at the ZVI surface strongly affect the sorption of the target compound (i.e., formate) and hence the oxidation of these compounds via surface-associated Fe(II)-mediated heterogeneous Fenton processes.
Assuntos
Compostos Férricos , Ferro , Soluções Tampão , Concentração de Íons de Hidrogênio , Oxirredução , Estresse OxidativoRESUMO
In this study, temporal changes in the redox properties of three 0.5 g/L smectite suspensions were investigated-a montmorillonite (MAu-1) and two nontronites (NAu-1 and NAu-2) in the presence of 1 mM aqueous Fe(II) at pH 7.8. X-ray absorption spectroscopy revealed that the amount of Fe(II) added quantitatively transformed into chloride-green rust (Cl-GR) within 5 min and persisted over 18 days. Over the same time, the reduction potential of all three suspensions increased by 50 to 150 mV to equilibrate at approximately -100 mV vs SHE. The reduction of a model organic contaminant, 4-chloronitrobenzene (4-CINB), also became increasingly slower over time with virtually no 4-CINB reduction being observed after 18 days. There was a strong correlation between reduction potential and the quantity of 4-ClNB reduced by MAu-1, although other factors were likely involved in the decreased redox reactivity observed in the nontronites. It is hypothesized that the temporal increase in reduction potential results from clay mineral dissolution resulting in increased Fe(III) contents in the Cl-GR. These results demonstrate that long-term studies are recommended to accurately predict contaminant management strategies.
Assuntos
Compostos Ferrosos , Silicatos , Compostos Férricos , Ferro , OxirreduçãoRESUMO
Molecular-level pathways in the aqueous redox transformation of uranium by iron remain unclear, despite the importance of this knowledge for predicting uranium transport and distribution in natural and engineered environments. As the relative importance of homogeneous versus heterogeneous pathways is difficult to probe experimentally, here we apply computational molecular simulation to isolate rates of key one electron transfer reactions in the homogeneous pathway. By comparison to experimental observations the role of the heterogeneous pathway also becomes clear. Density functional theory (DFT) and Marcus theory calculations for all primary monomeric species at pH values ≤7 show for UO22+ and its hydrolysis species UO2OH+ and UO2(OH)20 that reduction by Fe2+ is thermodynamically favorable, though kinetically limited for UO22+. An inner-sphere encounter complex between UO2OH+ and Fe2+ was the most stable for the first hydrolysis species and displayed an electron transfer rate constant ket = 4.3 × 103 s-1. Three stable inner- and outer-sphere encounter complexes between UO2(OH)20 and Fe2+ were found, with electron transfer rate constants ranging from ket = 7.6 × 102 to 7.2 × 104 s-1. Homogeneous reduction of these U(VI) hydrolysis species to U(V) is, therefore, predicted to be facile. In contrast, homogeneous reduction of UO2+ by Fe2+ was found to be thermodynamically unfavorable, suggesting the possible importance of U(V)-U(V) disproportionation as a route to U(IV). Calculations on homogeneous disproportionation, however, while yielding a stable outer-sphere U(V)-U(V) encounter complex, indicate that this electron transfer reaction is not feasible at circumneutral pH. Protonation of both axial O atoms of acceptor U(V) (i.e., by H3O+) was found to be a prerequisite to stabilize U(IV), consistent with the experimental observation that the rate of this reaction is inversely correlated with pH. Thus, despite prevailing notions that U(V) is rapidly eliminated by homogeneous disproportionation, this pathway is irrelevant at environmental conditions.
RESUMO
While it has been recognized for some time that addition of nanoparticlate zerovalent iron (nZVI) to oxygen-containing water results in both corrosion of Fe(0) and oxidation of contaminants, there is limited understanding of either the relationship between transformation of nZVI and oxidant formation or the factors controlling the lifetime and extent of oxidant production. Using Fe K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy, we show that while nZVI particles are transformed to ferrihydrite then lepidocrocite in less than 2 h, oxidant generation continues for up to 10 h. The major products (Fe(II) and H2O2) of the reaction of nZVI with oxygenated water are associated, for the most part, with the surface of particles present with these surface-associated Fenton reagents inducing oxidation of a target compound (in this study, (14)C-labeled formate). Effective oxidation of formate only occurred after formation of iron oxides on the nZVI surface with the initial formation of high surface area ferrihydrite facilitating rapid and extensive adsorption of formate with colocation of this target compound and surface-associated Fe(II) and H2O2 apparently critical to formate oxidation. Ongoing formate oxidation long after nZVI is consumed combined with the relatively slow consumption of Fe(II) and H2O2 suggest that these reactants are regenerated during the nZVI-initiated heterogeneous Fenton process.
Assuntos
Ferro/química , Nanopartículas Metálicas/química , Espécies Reativas de Oxigênio/química , Adsorção , Compostos Férricos/química , Peróxido de Hidrogênio/química , Oxidantes/química , Oxirredução , Oxigênio/química , Água/química , Espectroscopia por Absorção de Raios XRESUMO
Nanoscale zerovalent iron (nZVI) has shown potential to be an effective remediation agent for uranium-contaminated subsurface environments, however, the nature of the reaction products and their formation kinetics have not been fully elucidated over a range of environmentally relevant conditions. In this study, the oxygen-free reaction of U(VI) with varying quantities of nZVI was examined at pH 7 in the presence of both calcium and carbonate using a combination of X-ray absorption spectroscopy, X-ray diffraction and transmission electron microscopy. It was observed that the structure of the reduced U solid phases was time dependent and largely influenced by the ratio of nZVI to U in the system. At the highest U:Fe molar ratio examined (1:4), nanoscale uraninite (UO2) was predominantly formed within 1 day of reaction. At lower U:Fe molar ratios (1:21), evidence was obtained for the formation of sorbed U(IV) and U(V) surface complexes which slowly transformed to UO2 nanoparticles that were stable for up to 1 year of anaerobic incubation. After 8 days of reaction at the lowest U:Fe molar ratio examined (1:110), sorbed U(IV) was still the major form of U associated with the solid phase. Regardless of the U:Fe molar ratio, the anaerobic corrosion of nZVI resulted in the slow formation of micron-sized fibrous chukanovite (Fe2(OH)2CO3) particles.
Assuntos
Ferro/química , Nanopartículas/química , Urânio/química , Anaerobiose , Carbonatos/química , Cristalografia por Raios X , Meio Ambiente , Análise dos Mínimos Quadrados , Nanopartículas/ultraestrutura , Dinâmica não Linear , Oxirredução , Urânio/isolamento & purificação , Espectroscopia por Absorção de Raios XRESUMO
Uranium(VI) interactions with three smectites (one montmorillonite and two nontronites - NAu1 and NAu2) were examined with 0, 1, and 2 mM aqueous concentrations of Fe(II) over the pH range of 3-9.5 in a background electrolyte of 100 mM NaCl and 1 mM CaCl2 in equilibration with 400 ppmv CO2(g) ([U(VI)] = 4 µM and 0.5 g smectite/L). In the absence of Fe(II), no differences were observed in the U(VI) sorption curves for the three clay minerals. In the presence of 1 or 2 mM Fe(II), under anoxic conditions, U(VI) uptake by the smectites changed slightly between â¼pH 3 and 6; however, uranium uptake increased significantly above â¼pH 6 and was proportional to the concentration of Fe(II) added to the system, particularly at pH values >8. The uptake of Fe(II) showed a sharp edge starting from â¼pH 6.5 with 95%-100% uptake occurring at pH values >7.5, with no difference observed between the iron-rich nontronites and montmorillonite. After 3 days of reaction at pH 7.6 (i.e., above the Fe(II) "sorption" edge), U(VI) was transformed to a mixture of U(IV) and U(VI) sorption complexes, and after 14 days of reaction, 100% of the U was found to be reduced to U(IV) in the form of nanocrystalline uraninite. In contrast, U remained as sorbed species until 14 days of reaction at pH 6.5. Ferrihydrite (NAu1), lepidocrocite, and magnetite (NAu2) were detected as secondary mineralization products upon reaction of the nontronites with Fe(II) but appeared to have no effect on the partitioning or speciation of uranium.
Assuntos
Bentonita , Urânio/química , Compostos Ferrosos/química , Ferro/química , OxirreduçãoRESUMO
A series of the British nuclear tests conducted on mainland Australia between 1953 and 1963 dispersed long-lived radioactivity and nuclear weapons debris including plutonium (Pu), the legacy of which is a long-lasting source of radioactive contamination to the surrounding biosphere. A reliable assessment of the environmental impact of Pu contaminants and their implications for human health requires an understanding of their physical/chemical characteristics at the molecular scale. In this study, we identify the chemical form of the Pu remaining in the local soils at the Taranaki site, one of the former nuclear testing sites at Maralinga, South Australia. We herein reveal direct spectroscopic evidence that the Pu legacy remaining at the site exists as particulates of Pu(IV) oxyhydroxide compounds, a very concentrated and low-soluble form of Pu, which will serve as ongoing radioactive sources far into the future. Gamma-ray spectrometry and X-ray fluorescence analysis on a collected Pu particle indicate that the Pu in the particle originated in the so-called "Minor trials" that involved the dispersal of weapon components by highly explosive chemicals, not in the nuclear explosion tests called "Major trials". A comprehensive analysis of the data acquired from X-ray fluorescence mapping (XFM), X-ray absorption near-edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) suggests that the collected Pu particle forms a "core-shell" structure with the Pu(IV) oxyhydroxide core surrounded by an external layer containing Ca, Fe, and U, which further helps us to deduce a possible scenario of the physical/chemical transformation of the original Pu materials dispersed in the semiarid environment at Maralinga more than 50 years ago. These findings also highlight the importance of the comprehensive physical/chemical characterization of Pu contaminants for reliable environmental- and radiotoxicological assessment.
Assuntos
Plutônio , Poluentes Radioativos do Solo , Austrália , Armas Nucleares , Espectrometria gamaRESUMO
Increasing concentrations of dissolved silicate progressively retard Fe(II) oxidation kinetics in the circum-neutral pH range 6.0-7.0. As Si:Fe molar ratios increase from 0 to 2, the primary Fe(III) oxidation product transitions from lepidocrocite to a ferrihydrite/silica-ferrihydrite composite. Empirical results, supported by chemical kinetic modeling, indicated that the decreased heterogeneous oxidation rate was not due to differences in absolute Fe(II) sorption between the two solids types or competition for adsorption sites in the presence of silicate. Rather, competitive desorption experiments suggest Fe(II) was associated with more weakly bound, outer-sphere complexes on silica-ferrihydrite compared to lepidocrocite. A reduction in extent of inner-sphere Fe(II) complexation on silica-ferrihydrite confers a decreased ability for Fe(II) to undergo surface-induced hydrolysis via electronic configuration alterations, thereby inhibiting the heterogeneous Fe(II) oxidation mechanism. Water samples from a legacy radioactive waste site (Little Forest, Australia) were shown to exhibit a similar pattern of Fe(II) oxidation retardation derived from elevated silicate concentrations. These findings have important implications for contaminant migration at this site as well as a variety of other groundwater/high silicate containing natural and engineered sites that might undergo iron redox fluctuations.
Assuntos
Compostos Férricos/química , Compostos Ferrosos , Ferro/química , Oxirredução , Silicatos/químicaRESUMO
The uptake and binding of uranium [as (UO2)(2+)] by a moderately acidophilic fungus, Coniochaeta fodinicola, recently isolated from a uranium mine site, is examined in this work in order to better understand the potential impact of organisms such as this on uranium sequestration in hydrometallurgical systems. Our results show that the viability of the fungal biomass is critical to their capacity to remove uranium from solution. Indeed, live biomass (viable cells based on vital staining) were capable of removing â¼16 mg U/g dry weight in contrast with dead biomass (autoclaved) which removed â¼45 mg U/g dry weight after 2 h. Furthermore, the uranium binds with different strength, with a fraction ranging from â¼20-50% being easily leached from the exposed biomass by a 10 min acid wash. Results from X-ray absorption spectroscopy measurements show that the strength of uranium binding is strongly influenced by cell viability, with live cells showing a more well-ordered uranium bonding environment, while the distance to carbon or phosphorus second neighbors is similar in all samples. When coupled with time-resolved laser fluorescence and Fourier transformed infrared measurements, the importance of organic acids, phosphates, and polysaccharides, likely released with fungal cell death, appear to be the primary determinants of uranium binding in this system. These results provide an important progression to our understanding with regard to uranium sequestration in hydrometallurgical applications with implications to the unwanted retention of uranium in biofilms and/or its mobility in a remediation context.
Assuntos
Ascomicetos/metabolismo , Urânio/farmacocinética , Ascomicetos/efeitos dos fármacos , Biomassa , Polissacarídeos Fúngicos/metabolismo , Fosfatos/metabolismo , Espectroscopia de Infravermelho com Transformada de Fourier , Urânio/metabolismo , Poluentes Químicos da Água/farmacocinética , Espectroscopia por Absorção de Raios XRESUMO
Small angle X-ray scattering (SAXS) measurements coupled to a stopped-flow device has permitted the observation of the kinetics of Fe(III) oxyhydroxide (FeOx) formation and transformation from around 1 s to 30 min after initiation under environmentally relevant conditions at pH 3. The Unified Model approach was used to determine the evolution of multiple key parameters (particle scattering mass, mean particle volume, particle concentration, particle dimensionality, and particle size) for two separate structural levels as a function of time, with the results obtained enabling clarification of the mechanisms underlying FeOx formation and transformation under these conditions. Colloidal primary particles (radius of gyration 2-10 nm) that were observable by SAXS formed within 1 s of stopping the flow and subsequently grew over several minutes, first by cluster-cluster addition and then by a monomer-addition mechanism. Aggregation of these primary particles via a secondary cluster-cluster addition mechanism simultaneously resulted in a distinct population of larger (25-40 nm radius of gyration) secondary particles. The primary particles evolved into compact spheroidal forms with fractally rough surfaces, while the secondary particles were relatively open mass fractal structures. Comparison of the observed rates of these processes with those predicted for Fe polymerization indicates that kinetics of primary particle formation were likely controlled initially by rates of exchange between water molecules coordinated with Fe and those in the bulk solution. These findings provide new insights into the mechanisms underlying FeOx formation and transformation, and the kinetics of these mechanisms, at pH 3.
RESUMO
Microbial community compositions were determined for three soil horizons and drain sediments within an anthropogenically disturbed coastal acid sulfate landscape using 16S rRNA gene tagged 454 pyrosequencing. Diversity analyses were problematic due to the high microbiological heterogeneity between each geochemical replicate. Taxonomic analyses combined with measurements of metal(loid) bioaccessibility identified significant correlations to genera (5% phylogenetic distance) abundances. A number of positive correlations between genera abundance and bioaccessible metals concentrations were observed, indicating that metal(loid) tolerance influences microbial community compositions in these types of landscapes. Of note, Mn was highly bioaccessible (≤ 24% total soil Mn); and Mn bioaccessibility positively correlated to Acidobacterium abundance, but negatively correlated to Holophaga abundance. Two unidentified archaeal genera belonging to Crenarchaeota were also correlated to bioaccessible Mn concentrations, suggesting these genera can exploit Mn redox chemistry.
Assuntos
Arsênio/análise , Metais/análise , Microbiologia do Solo , Archaea/genética , Bactérias/genética , Genes de RNAr , Sedimentos Geológicos/análise , Concentração de Íons de Hidrogênio , Filogenia , RNA Ribossômico 16S/genética , Poluentes do Solo/análise , SulfatosRESUMO
Aqueous ferrous iron (Fe(II)) accelerates the transformation of ferrihydrite into secondary, more crystalline minerals however the factors controlling the rate and, indeed, the underlying mechanism of this transformation process remain unclear. Here, we present the first detailed study of the kinetics of the Fe(II)-accelerated transformation of ferrihydrite to goethite, via lepidocrocite, for a range of pH and Fe(II) concentrations and, from the results obtained, provide insight into the factors controlling the transformation rate and the processes responsible for transformation. A reaction scheme for the Fe(II)-accelerated secondary mineralization of ferrihydrite is developed in which an Fe(II) atom attaches to the ferrihydrite surface where it is immediately oxidized to Fe(III) with the resultant electron transferred, sequentially, to other iron oxyhydroxide Fe(III) atoms before release to solution as Fe(II). This freshly precipitated Fe(III) forms the nuclei for the formation of secondary minerals and also facilitates the ongoing uptake of Fe(II) from solution by creation of fresh surface sites. The concentration of solid-associated Fe(II) and the rate of transport of Fe(II) to the oxyhydroxide surface appear to determine which particular secondary minerals form and their rates of formation. Lepidocrocite growth is enhanced at lower solid-associated Fe(II) concentrations while conditions leading to more rapid uptake of Fe(II) from solution lead to higher goethite growth rates.