Ferromagnetic Resonance Assisted Optomechanical Magnetometer.

The resonant enhancement of mechanical and optical interaction in optomechanical cavities enables their use as extremely sensitive displacement and force detectors. In this Letter, we demonstrate a hybrid magnetometer that exploits the coupling between the resonant excitation of spin waves in a ferromagnetic insulator and the resonant excitation of the breathing mechanical modes of a glass microsphere deposited on top. The interaction is mediated by magnetostriction in the ferromagnetic material and the consequent mechanical driving of the microsphere. The magnetometer response thus relies on the spectral overlap between the ferromagnetic resonance and the mechanical modes of the sphere, leading to a peak sensitivity of 850 pT Hz^{-1/2} at 206 MHz when the overlap is maximized. By externally tuning the ferromagnetic resonance frequency with a static magnetic field, we demonstrate sensitivity values at resonance around a few nT Hz^{-1/2} up to the gigahertz range. Our results show that our hybrid system can be used to build a high-speed sensor of oscillating magnetic fields.

Synchronization of Optomechanical Nanobeams by Mechanical Interaction.

The synchronization of coupled oscillators is a phenomenon found throughout nature. Mechanical oscillators are paradigmatic examples, but synchronizing their nanoscaled versions is challenging. We report synchronization of the mechanical dynamics of a pair of optomechanical crystal cavities that, in contrast to previous works performed in similar objects, are intercoupled with a mechanical link and support independent optical modes. In this regime they oscillate in antiphase, which is in agreement with the predictions of our numerical model that considers reactive coupling. We also show how to temporarily disable synchronization of the coupled system by actuating one of the cavities with a heating laser, so that both cavities oscillate independently. Our results can be upscaled to more than two cavities and pave the way towards realizing integrated networks of synchronized mechanical oscillators.

Nanocrystalline silicon optomechanical cavities.

Silicon on insulator photonics has offered a versatile platform for the recent development of integrated optomechanical circuits. However, there are some constraints such as the high cost of the wafers and limitation to a single physical device level. In the present work we investigate nanocrystalline silicon as an alternative material for optomechanical devices. In particular, we demonstrate that optomechanical crystal cavities fabricated of nanocrystalline silicon have optical and mechanical properties enabling non-linear dynamical behaviour and effects such as thermo-optic/free-carrier-dispersion self-pulsing, phonon lasing and chaos, all at low input laser power and with typical frequencies as high as 0.3 GHz.

Optomechanical crystals for spatial sensing of submicron sized particles.

Optomechanical crystal cavities (OMC) have rich perspectives for detecting and indirectly analysing biological particles, such as proteins, bacteria and viruses. In this work we demonstrate the working principle of OMCs operating under ambient conditions as a sensor of submicrometer particles by optically monitoring the frequency shift of thermally activated mechanical modes. The resonator has been specifically designed so that the cavity region supports a particular family of low modal-volume mechanical modes, commonly known as -pinch modes-. These involve the oscillation of only a couple of adjacent cavity cells that are relatively insensitive to perturbations in other parts of the resonator. The eigenfrequency of these modes decreases as the deformation is localized closer to the centre of the resonator. Thus, by identifying specific modes that undergo a frequency shift that amply exceeds the mechanical linewidth, it is possible to infer if there are particles deposited on the resonator, how many are there and their approximate position within the cavity region. OMCs have rich perspectives for detecting and indirectly analysing biological particles, such as proteins, viruses and bacteria.

Extending the applicability of an open-ring trap to perform experiments with a single laser-cooled ion.

A special ion trap was initially built up to perform ß-ν correlation experiments with radioactive ions. The trap geometry is also well suited to perform experiments with laser-cooled ions, serving for the development of a new type of Penning trap, in the framework of the project TRAPSENSOR at the University of Granada. The goal of this project is to use a single (40)Ca(+) ion as detector for single-ion mass spectrometry. Within this project and without any modification to the initial electrode configuration, it was possible to perform Doppler cooling on (40)Ca(+) ions, starting from large clouds and reaching single ion sensitivity. This new feature of the trap might be important also for other experiments with ions produced at radioactive ion beam facilities. In this publication, the trap and the laser system will be described, together with their performance with respect to laser cooling applied to large ion clouds down to a single ion.

Histopathological trephine biopsy findings in cases of 'dry tap' bone marrow aspirations.

Out of 3,173 bone marrow biopsies, we found 138 cases (4.3%) of 'dry tap' aspirations: 35/218 (16%) acute leukemias, 44/445 (9.8%) myeloproliferative syndromes, 29/328 (8.8%) malignant lymphomas and Hodgkin's diseases, 10/208 (4.8%) myelomas and 10/74 (13.5%) metastatic carcinomas. Histology showed that the most common changes associated with scanty yield aspirations were bone marrow fibrosis (patchy or diffuse) and hypercellularity (especially if due to immature cells). None of the 'dry tap' cases showed normal bone marrow by trephine biopsy. It is concluded that the finding of a 'dry tap' should never be dismissed as being due to faulty technique and always needs a bone marrow biopsy.

[Spectrum analysis of the r-r interval using a PC]. / L'analisi spettrale degli intèrvalli r-r mediante PC.

Spectral analysis of r-r variability has been recently proposed as a clinical tool to assess the autonomic nervous system function. In this article we present the results obtained using an equipment and an analysis software (based on Maximum Entropy Method) developed in our laboratory. Analyzing the tachograms derived from prolonged ECG registrations of 12 young healthy subjects, 24 to 36 years old (mean 31 +/- 4), we observed the two classic components of the signal: a low frequency component (0.7 +/- 0.2 Hz) and a high frequency component (0.21 +/- 16.6 Hz). As expected, standing, a simple manoeuvre augmenting sympathetic activity, caused a stronger predominance of the low frequency component. We conclude that our method is reliable to evaluate, by means of spectral analysis, rhythmical oscillations of r-r variability.

Molecular characterization of the terminal energy acceptor of cyanobacterial phycobilisomes.

Cyanobacteria harvest light energy through multimolecular structures, the phycobilisomes, regularly arrayed at the surface of the photosynthetic membranes. Phycobilisomes consist of a central core from which rods radiate. A large polypeptide (LCM, 75-120 kDa) is postulated to act both as terminal energy acceptor and as a linker polypeptide that stabilizes the phycobilisome architecture. We report here the characterization of the gene (apcE) that encodes this LCM polypeptide in Calothrix sp. PCC 7601. It is located upstream from the genes encoding the major components of the phycobilisome core (allophycocyanin) and is part of the same operon. The deduced amino acid sequence shows that the N-terminal region of LCM shares homology with the other phycobiliprotein subunits and thus constitutes the chromoprotein domain. The other part of the molecule is made up of four repeated domains that are highly homologous to the N-terminal regions of the phycocyanin rod linker polypeptides. The predicted secondary structure of the different domains of the LCM is discussed in relation to the different roles and properties of this large molecule.

[Evaluation of the characteristics and performance of an automatic sphygmomanometer (Omega 1400)]. / Valutazione delle caratteristiche e delle prestazioni di uno sfigmomanometro automatico (Omega 1400).

24 hour pressure monitoring is a newly developing technique potentially yielding important informations in hypertensive patients. Numerous automated devices are available whose performance characteristics are poorly documented. To evaluate an automated sphygmomanometer commonly used in our Division (Omega 1400, Invivo Research Laboratories), we performed a series of measurements, simultaneously recording blood pressure in the opposite arm with a common sphygmomanometer. Each measure was then repeated reversing the position of the two devices (manual and automated), thus abolishing possible differences between the two arms. We observed a mean underestimation of 1.90 mmHg of systolic pressure and of 4.82 mmHg of diastolic blood pressure by the automated device. We conclude that the device by us evaluated is not advisable in the basal blood pressure evaluation, but useful in monitoring inpatients.

[Blood pressure monitoring during hospital convalescence]. / Il monitoraggio della pressione arteriosa durante il ricovero ospedaliero.

Blood pressure ambulatory monitoring has provided numerous and interesting informations on the clinical as well as investigational setting of arterial hypertension. The vast majority of data have been obtained registering blood pressure during the normal daily activities of the patients and surprisingly few studies have been undertaken to evaluate blood pressure behaviour in inpatients. We observed the 24 hours pattern of blood pressure in hypertensive and normotensive inpatients, using an automated sphygmomanometer (Omega 1400), whose performance was previously evaluated by us. The results demonstrate that blood pressure monitoring in inpatients could be a useful tool in managing hypertensive patients.

[Evaluation of a new immunoturbidimetry technique for measuring microalbuminuria]. / Valutazione di una nuova tecnica immunoturbidimetrica per il dosaggio della microalbuminuria.

Subclinical elevation of urinary albumin excretion is a good predictor of later clinical proteinuria. A simple, sensitive and rapid immunoturbidimetric method was developed to quantify urinary albumin excretion (URIN-PAK ImmunoMICRO LAB, Miles Italia Spa). In the presence of polyethylene glycol 6000, immunocomplex between human albumin and its specific antibody are rapidly formed (5-50 min, at room temperature). Absorbance reading are mode U 340 nm (Automatic Analyzer RA 1000, Technicon). The test is specific for albumin failing to cross react with other plasma proteins present in urine, as well as with glibenclamide, chlorpropamide, phenformin, hemoglobin, glucose, urea and thymol. The present method correlates with SCLAVO H-ALBUMIN RIA Kit (r = 0.9917). The test is suitable for clinical use.