Sub-picoliter Traceability of Microdroplet Gravimetry and Microscopy.

Gravimetry typically lacks the resolution to measure single microdroplets, whereas microscopy is often inaccurate beyond the resolution limit. To address these issues, we advance and integrate these complementary methods, introducing simultaneous measurements of the same microdroplets, comprehensive calibrations that are independently traceable to the International System of Units (SI), and Monte-Carlo evaluations of volumetric uncertainty. We achieve sub-picoliter agreement of measurements of microdroplets in flight with volumes of approximately 70 pL, with ensemble gravimetry and optical microscopy both yielding 95% coverage intervals of ±0.6 pL, or relative uncertainties of ±0.9%, and root-mean-square deviations of mean values between the two methods of 0.2 pL or 0.3%. These uncertainties match previous gravimetry results and improve upon previous microscopy results by an order of magnitude. Gravimetry precision depends on the continuity of droplet formation, whereas microscopy accuracy requires that optical diffraction from an edge reference matches that from a microdroplet. Applying our microscopy method, we jet and image water microdroplets suspending fluorescent nanoplastics, count nanoplastic particles after deposition and evaporation, and transfer volumetric traceability to the number concentrations of single microdroplets. We expect that our methods will impact diverse fields involving dimensional metrology and volumetric analysis of microdroplets, including inkjet microfabrication, disease transmission, and industrial sprays.

Unmasking the Resolution-Throughput Tradespace of Focused-Ion-Beam Machining.

Focused-ion-beam machining is a powerful process to fabricate complex nanostructures, often through a sacrificial mask that enables milling beyond the resolution limit of the ion beam. However, current understanding of this super-resolution effect is empirical in the spatial domain and nonexistent in the temporal domain. This article reports the primary study of this fundamental tradespace of resolution and throughput. Chromia functions well as a masking material due to its smooth, uniform, and amorphous structure. An efficient method of in-line metrology enables characterization of ion-beam focus by scanning electron microscopy. Fabrication and characterization of complex test structures through chromia and into silica probe the response of the bilayer to a focused beam of gallium cations, demonstrating super-resolution factors of up to 6 ± 2 and improvements to volume throughput of at least factors of 42 ± 2, with uncertainties denoting 95% coverage intervals. Tractable theory models the essential aspects of the super-resolution effect for various nanostructures. Application of the new tradespace increases the volume throughput of machining Fresnel lenses by a factor of 75, enabling the introduction of projection standards for optical microscopy. These results enable paradigm shifts of sacrificial masking from empirical to engineering design and from prototyping to manufacturing.

Particle Tracking of Microelectromechanical System Performance and Reliability.

Microelectromechanical systems (MEMS) that require contact of moving parts to implement complex functions exhibit limits to their performance and reliability. Here, we advance our particle tracking method to measure MEMS motion in operando at nanometer, microradian, and millisecond scales. We test a torsional ratcheting actuator and observe dynamic behavior ranging from nearly perfect repeatability, to transient feedback and stiction, to terminal failure. This new measurement capability will help to understand and improve MEMS motion.

Acute slowing of cardiac conduction in response to myofibroblast coupling to cardiomyocytes through N-cadherin.

The electrophysiological consequences of cardiomyocyte and myofibroblast interactions remain unclear, and the contribution of mechanical coupling between these two cell types is still poorly understood. In this study, we examined the time course and mechanisms by which addition of myofibroblasts activated by transforming growth factor-beta (TGF-ß) influence the conduction velocity (CV) of neonatal rat ventricular cell monolayers. We observed that myofibroblasts affected CV within 30 min of contact and that these effects were temporally correlated with membrane deformation of cardiomyocytes by the myofibroblasts. Expression of dominant negative RhoA in the myofibroblasts impaired both myofibroblast contraction and myofibroblast-induced slowing of cardiac conduction, whereas overexpression of constitutive RhoA had little effect. To determine the importance of mechanical coupling between these cell types, we examined the expression of the two primary cadherins in the heart (N- and OB-cadherin) at cell-cell contacts formed between myofibroblasts and cardiomyocytes. Although OB-cadherin was frequently found at myofibroblast-myofibroblast contacts, very little expression was observed at myofibroblast-cardiomyocyte contacts. The myofibroblast-induced slowing of cardiac conduction was not prevented by silencing of OB-cadherin in the myofibroblasts, and could be reversed by inhibitors of mechanosensitive channels (gadolinium or streptomycin) and cellular contraction (blebbistatin). In contrast, N-cadherin expression was commonly observed at myofibroblast-cardiomyocyte contacts, and silencing of N-cadherin in myofibroblasts prevented the myofibroblast-dependent slowing of cardiac conduction. We propose that myofibroblasts can impair the electrophysiological function of cardiac tissue through the application of contractile force to the cardiomyocyte membrane via N-cadherin junctions.

Traceable localization enables accurate integration of quantum emitters and photonic structures with high yield.

In a popular integration process for quantum information technologies, localization microscopy of quantum emitters guides lithographic placement of photonic structures. However, a complex coupling of microscopy and lithography errors degrades registration accuracy, severely limiting device performance and process yield. We introduce a methodology to solve this widespread but poorly understood problem. A new foundation of traceable localization enables rapid characterization of lithographic standards and comprehensive calibration of cryogenic microscopes, revealing and correcting latent systematic effects. Of particular concern, we discover that scale factor deviation and complex optical distortion couple to dominate registration errors. These novel results parameterize a process model for integrating quantum dots and bullseye resonators, predicting higher yield by orders of magnitude, depending on the Purcell factor threshold as a quantum performance metric. Our foundational methodology is a key enabler of the lab-to-fab transition of quantum information technologies and has broader implications to cryogenic and correlative microscopy.

Mechanical coupling between myofibroblasts and cardiomyocytes slows electric conduction in fibrotic cell monolayers.

BACKGROUND: After cardiac injury, activated cardiac myofibroblasts can influence tissue electrophysiology. Because mechanical coupling through adherens junctions provides a route for intercellular communication, we tested the hypothesis that myofibroblasts exert tonic contractile forces on the cardiomyocytes and affect electric propagation via a process of mechanoelectric feedback. METHODS AND RESULTS: The role of mechanoelectric feedback was examined in transforming growth factor-ß-treated monolayers of cocultured myofibroblasts and neonatal rat ventricular cells by inhibiting myofibroblast contraction and blocking mechanosensitive channels. Untreated (control) and transforming growth factor-ß-treated (fibrotic) anisotropic monolayers were optically mapped for electrophysiological comparison. Longitudinal conduction velocity, transverse conduction velocity, and normalized action potential upstroke velocity (dV/dt(max)) significantly decreased in fibrotic monolayers (14.4 ± 0.7 cm/s [mean ± SEM], 4.1 ± 0.3 cm/s [n=53], and 3.1 ± 0.2% per ms [n=14], respectively) compared with control monolayers (27.2 ± 0.8 cm/s, 8.5 ± 0.4 cm/s [n=40], and 4.9 ± 0.1% per ms [n=12], respectively). Application of the excitation-contraction uncoupler blebbistatin or the mechanosensitive channel blocker gadolinium or streptomycin dramatically increased longitudinal conduction velocity, transverse conduction velocity, and dV/dt(max) in fibrotic monolayers (35.9 ± 1.5 cm/s, 10.3 ± 0.6 cm/s [n=17], and 4.5 ± 0.1% per ms [n=14], respectively). Similar results were observed with connexin43-silenced cardiac myofibroblasts. Spiral-wave induction in fibrotic monolayers also decreased after the aforementioned treatments. Finally, traction force measurements of individual myofibroblasts showed a significant increase with transforming growth factor-ß, a decrease with blebbistatin, and no change with mechanosensitive channel blockers. CONCLUSIONS: These observations suggest that myofibroblast-myocyte mechanical interactions develop during cardiac injury, and that cardiac conduction may be impaired as a result of increased mechanosensitive channel activation owing to tension applied to the myocyte by the myofibroblast.

Accurate localization microscopy by intrinsic aberration calibration.

A standard paradigm of localization microscopy involves extension from two to three dimensions by engineering information into emitter images, and approximation of errors resulting from the field dependence of optical aberrations. We invert this standard paradigm, introducing the concept of fully exploiting the latent information of intrinsic aberrations by comprehensive calibration of an ordinary microscope, enabling accurate localization of single emitters in three dimensions throughout an ultrawide and deep field. To complete the extraction of spatial information from microscale bodies ranging from imaging substrates to microsystem technologies, we introduce a synergistic concept of the rigid transformation of the positions of multiple emitters in three dimensions, improving precision, testing accuracy, and yielding measurements in six degrees of freedom. Our study illuminates the challenge of aberration effects in localization microscopy, redefines the challenge as an opportunity for accurate, precise, and complete localization, and elucidates the performance and reliability of a complex microelectromechanical system.

Subnanometer localization accuracy in widefield optical microscopy.

The common assumption that precision is the limit of accuracy in localization microscopy and the typical absence of comprehensive calibration of optical microscopes lead to a widespread issue-overconfidence in measurement results with nanoscale statistical uncertainties that can be invalid due to microscale systematic errors. In this article, we report a comprehensive solution to this underappreciated problem. We develop arrays of subresolution apertures into the first reference materials that enable localization errors approaching the atomic scale across a submillimeter field. We present novel methods for calibrating our microscope system using aperture arrays and develop aberration corrections that reach the precision limit of our reference materials. We correct and register localization data from multiple colors and test different sources of light emission with equal accuracy, indicating the general applicability of our reference materials and calibration methods. In a first application of our new measurement capability, we introduce the concept of critical-dimension localization microscopy, facilitating tests of nanofabrication processes and quality control of aperture arrays. In a second application, we apply these stable reference materials to answer open questions about the apparent instability of fluorescent nanoparticles that commonly serve as fiducial markers. Our study establishes a foundation for subnanometer localization accuracy in widefield optical microscopy.

Transfer of motion through a microelectromechanical linkage at nanometer and microradian scales.

Mechanical linkages are fundamentally important for the transfer of motion through assemblies of parts to perform work. Whereas their behavior in macroscale systems is well understood, there are open questions regarding the performance and reliability of linkages with moving parts in contact within microscale systems. Measurement challenges impede experimental studies to answer such questions. In this study, we develop a novel combination of optical microscopy methods that enable the first quantitative measurements at nanometer and microradian scales of the transfer of motion through a microelectromechanical linkage. We track surface features and fluorescent nanoparticles as optical indicators of the motion of the underlying parts of the microsystem. Empirical models allow precise characterization of the electrothermal actuation of the linkage. The transfer of motion between translating and rotating links can be nearly ideal, depending on the operating conditions. The coupling and decoupling of the links agree with an ideal kinematic model to within approximately 5%, and the rotational output is perfectly repeatable to within approximately 20 microradians. However, stiction can result in nonideal kinematics, and input noise on the scale of a few millivolts produces an asymmetric interaction of electrical noise and mechanical play that results in the nondeterministic transfer of motion. Our study establishes a new approach towards testing the performance and reliability of the transfer of motion through assemblies of microscale parts, opening the door to future studies of complex microsystems.

Matrix viscoplasticity and its shielding by active mechanics in microtissue models: experiments and mathematical modeling.

The biomechanical behavior of tissues under mechanical stimulation is critically important to physiological function. We report a combined experimental and modeling study of bioengineered 3D smooth muscle microtissues that reveals a previously unappreciated interaction between active cell mechanics and the viscoplastic properties of the extracellular matrix. The microtissues' response to stretch/unstretch actuations, as probed by microcantilever force sensors, was dominated by cellular actomyosin dynamics. However, cell lysis revealed a viscoplastic response of the underlying model collagen/fibrin matrix. A model coupling Hill-type actomyosin dynamics with a plastic perfectly viscoplastic description of the matrix quantitatively accounts for the microtissue dynamics, including notably the cells' shielding of the matrix plasticity. Stretch measurements of single cells confirmed the active cell dynamics, and were well described by a single-cell version of our model. These results reveal the need for new focus on matrix plasticity and its interactions with active cell mechanics in describing tissue dynamics.

Heterotypic cell pair co-culturing on patterned microarrays.

We present a pair-wise co-culturing technique that creates large numbers of heterotypic cell pairs in patterned arrays. Lithographic patterning produces arrays with thousands of traps, each designed to accommodate only two cells and confine them at these sites for co-culturing. Two variants are introduced: a random seeding method that sediments a mixture of two cell types onto the array, and an approach that incorporates ferromagnetic thin films into the arrays and attracts cells that have been attached to ferromagnetic nanowires to the array sites through dipole interactions. The array technique includes the utilization of custom image analysis software that extracts data from multi-channel fluorescence images and records information about the cells in every trap, enabling the acquisition of accurate, high-statistics data. The applicability of the technique was demonstrated in experiments examining proliferation rates in pairs of bovine pulmonary artery endothelial and smooth muscle cells. Results demonstrated that heterotypic interactions favored smooth muscle cell proliferation while disfavoring endothelial cell proliferation. This is one example of a variety of cell-cell interactions that could be probed with this method.