Viability and oxidative stress of dental pulp cells after indirect application of chemomechanical agents: An in vitro study.

AIM: This study evaluated the transdentinal cytotoxic effects of enzymatic agents (EA) for chemomechanical carious tissue removal on human dental pulp cells. METHODOLOGY: The groups were based on the performed dentine treatments (n = 8): G1: Positive Control (PC - no treatment); G2: Negative Control (NC - 35% H2 O2 for 2 min); G3: Brix 3000™ (BX) for 30 s; G4: BX for 2 min; G5: Papacarie Duo™ (PD) for 30 s; G6: PD for 2 min. The cells were evaluated for viability (VB; MTT assay) and production of reactive oxygen species (ROS; DCFH-DA assay) and nitric oxide (NO; Griess reagent). A scanning electron microscope provided morphological chemical analyses and energy-dispersive X-ray spectroscopy. The data were submitted to the one-way anova statistical test complemented by Tukey (p < .05). RESULTS: Cell viability decreased by 21.1% and 58.4% in G5 and G6, respectively. ROS production in G3 and G4 maintained basal levels but increased by 171.2% and 75.1% in G5 and G6, respectively. CONCLUSIONS: The Brix3000™ enzymatic agent did not cause indirect cytotoxic effects on pulp cells, regardless of the application time. Conversely, Papacarie Duo™ reduced viability and increased ROS production by pulp cells.

Catalysis-based approaches with biopolymers and violet LED to improve in-office dental bleaching.

This in vitro experimental investigation aimed to evaluate the impact of the combined application of a nanofiber scaffold (NS), a polymeric catalyst primer (PCP) containing 10 mg/mL of heme peroxidase enzyme, and violet LED (LEDv) on the esthetic efficacy (EE), trans-amelodentinal cytotoxicity (TC), and procedural duration of conventional in-office bleaching therapy. To achieve this, 96 standardized enamel/dentin discs were individually placed in artificial pulp chambers. A 35% hydrogen peroxide (H2O2) bleaching gel was administered for 45, 30, or 15 min to the enamel, either previously coated with NS + PCP or left uncoated, followed by irradiation with LEDv for 15 min or no irradiation. The established groups were as follows: G1, negative control (no treatment); G2, 35% H2O2/45 min; G3, NS + PCP + LEDv; G4, NS + PCP + 35%H2O2/45 min + LEDv; G5, NS + PCP + 35%H2O2/30 min + LEDv; and G6, NS + PCP + 35%H2O2/15 min + LEDv. Extracts (culture medium + gel components diffused through the discs) were collected and applied to odontoblast-like MDPC-23 cells. EE (ΔE00 and ΔWI) and TC were assessed using ANOVA/Tukey analysis (p < 0.05). The EE analysis revealed no statistical differences between G6 and G2 (p > 0.05). Cells in G6 exhibited higher viability and lower oxidative stress compared to other bleached groups (p < 0.05). In conclusion, employing NS + PCP + LEDv to catalyze a 35%H2O2 bleaching gel applied for 15 min to the enamel resulted in successful esthetic improvements and reduced the cytotoxicity commonly linked with traditional in-office bleaching procedures.

Chitosan-Calcium Aluminate as a Cell-homing Scaffold: Its Bioactivity Testing in a Microphysiological Dental Pulp Platform.

In vitro models of the dental pulp microenvironment have been proposed for the assessment of biomaterials, to minimise animal use in operative dentistry. In this study, a scaffold/3-D dental pulp cell culture interface was created in a microchip, under simulated dental pulp pressure, to evaluate the cell-homing potential of a chitosan (CH) scaffold functionalised with calcium aluminate (the 'CHAlCa scaffold'). This microphysiological platform was cultured at a pressure of 15 cm H2O for up to 14 days; cell viability, migration and odontoblastic differentiation were then assessed. The CHAlCa scaffold exhibited intense chemotactic potential, causing cells to migrate from the 3-D culture to its surface, followed by infiltration into the macroporous structure of the scaffold. By contrast, the cells in the presence of the non-functionalised chitosan scaffold showed low cell migration and no cell infiltration. CHAlCa scaffold bioactivity was confirmed in dentin sialophosphoprotein-positive migrating cells, and odontoblastic markers were upregulated in 3-D culture. Finally, in situ mineralised matrix deposition by the cells was confirmed in an Alizarin Red-based assay, in which the CHAlCa and CH scaffolds were adapted to fit within dentin discs. More intense deposition of matrix was observed with the CHAlCa scaffold, as compared to the CH scaffold. In summary, we present an in vitro platform that provides a simple and reproducible model for selecting and developing innovative biomaterials through the assessment of their cell-homing potential. By using this platform, it was shown that the combination of calcium aluminate and chitosan has potential as an inductive biomaterial that can mediate dentin tissue regeneration during cell-homing therapies.

Effectiveness and safety of biosilicate-enhanced bleaching gels on enamel with early erosion lesion.

AIM: This study evaluated the efficacy and cytotoxicity of 35% hydrogen peroxide (HP) gel incorporated with 10% (w/w) biosilicate (BioS) on sound enamel and early-stage enamel erosion lesions. METHODS: Discs of enamel/dentin were selected, subjected to erosive cycles (0.3% citric acid, pH 2.6), and treated with (n = 8): HP (35% HP, positive control); HP_BioS [carboxymethyl cellulose (CMC) + HP + BioS]; BioS (CMC + BioS); CMC (negative control). The discs were adapted to artificial pulp chambers with the enamel exposed for bleaching, and the dentin facing toward the culture medium (Dulbecco's modified Eagle's medium [DMEM]). Bleaching was performed in three 30-min sessions at 7-day intervals. After bleaching, the diffusion product (DMEM extract + diffused HP) was pipetted onto MDPC-23 odontoblastic cell line and inoculated. Color parameters (ΔL, Δa, Δb), color change (ΔE00), and changes in whiteness index (ΔWID) were determined before (T0) and after the last bleaching session (T3). Cell viability (MTT, %), H2O2 diffusion (µg/mL), oxidative cell stress (OxS), and cell fluorescence (live/dead assay, in confocal microscopy) were assessed (ANOVA/Tukey; α = 0.05). RESULTS: No difference in ΔL, Δa, Δb, ΔE00, and ΔWID were found between HP and HP_BioS (p > 0.05). The incorporation of BioS decreased the HP diffusion into the substrates and mitigated oxidative stress in early-stage eroded enamel (p < 0.05). HP_BioS presented significantly higher cell viability compared with HP under erosion conditions. Live/dead assay indicated that BioS_HP maintained viability with larger clusters of viable cells. CONCLUSION: Incorporating BioS into HP maintained bleaching effectiveness, favored cell viability, reduced the oxidative stress, and the cytotoxicity in teeth with early-stage erosion. CLINICAL SIGNIFICANCE: BioS formulation showed promising results for reducing cytotoxicity in patients seeking tooth bleaching and presenting undetectable early-stage erosion.

EGF coating of titanium surfaces modulates cytokines in oral mucosal primary cells exposed to TNF-α.

OBJECTIVE: This study assessed the metabolism of oral mucosal cells cultured on titanium discs (Ti) coated (or not) with epidermal growth factor (EGF) and exposed to tumor necrosis factor alpha (TNF-α). METHODS: Fibroblasts or keratinocytes were seeded on Ti coated or not with EGF, and then exposed to 100 ng/mL of TNF-α for 24 h. Groups were established: G1: Ti (control); G2: Ti + TNF-α; G3: Ti + EGF; and G4: Ti + EGF + TNF-α. Both cell lines were evaluated for: viability (AlamarBlue®, n = 8); interleukin 6 and 8 (IL-6, IL-8) gene expression (qPCR, n = 5), and protein synthesis (ELISA, n = 6). For keratinocytes cells, the matrix metalloproteinase type 3 (MMP-3) was evaluated by qPCR (n = 5) and ELISA (n = 6). A 3-D culture of fibroblasts was analyzed by confocal microscopy. The data were subjected to ANOVA analysis, α = 5%. RESULTS: Increased cell viability was observed in all groups compared with G1. Enhanced gene expression and synthesis of IL-6 and IL-8 by fibroblasts and keratinocytes in G2 and modulation of hIL-6 gene expression in G4 was noted. Modulation of IL-8 synthesis occurred in keratinocytes in G3 and G4. Keratinocytes in G2 showed enhanced gene expression of hMMP-3. A 3-D culture showed more cells in G3. Fibroblasts in G2 exhibited disrupted cytoplasmic membrane. Cells in G4 showed elongated morphology with intact cytoplasm. CONCLUSIONS: EGF coating increases cell viability and modulates the response of oral cells exposed to an inflammatory stimulus.

Pulp cell response to the application of silver diamine fluoride and potassium iodide on caries-like demineralized dentin.

OBJECTIVES: To investigate the response of pulp cells to the application of silver diamine fluoride (SDF) and potassium iodide (KI) on demineralized dentin. MATERIALS AND METHODS: The occlusal surfaces of human dentin discs (0.4 mm thick) with similar permeability were subjected to an artificial caries protocol, and then the discs were adapted into artificial pulp chambers. MDPC-23 cells were seeded on the healthy pulp dentin surface, while the demineralized surface was treated with SDF, KI, SDF + KI, or hydrogen peroxide (positive control-PC) (n = 8). The negative control (NC) received ultrapure water. After 24 h, cell viability (alamarBlue) and morphology (SEM) were evaluated. The extracts were then applied to new MDPC-23 cells seeded in culture plates to assess their viability and the formation of mineralized nodules (MN; Alizarin Red) after seven days. The data were analyzed using one-way analysis of variance/Tukey or Games-Howell tests (α = 5%). RESULTS: SDF and PC significantly reduced the viability of cells seeded on discs (45.6% and 71.0%, respectively). Only cells treated with SDF or PC detached from the dentin substrate, while the remaining cells showed altered morphology. Cells in contact with extracts showed less reduction in viability, but it was still more toxic compared to NC. Only PC reduced MN deposition. SDF + KI or KI alone did not affect the cell response. CONCLUSIONS: SDF applied alone showed a mild to moderate transdentinal cytotoxic effect on pulp cells. However, the combination of SDF + KI reduced the cytotoxic effects. Both materials used alone or in combination did not affect the mineralization ability of pulp cells. CLINICAL RELEVANCE: Besides improving esthetic results, associating potassium iodide with silver diamine fluoride may reduce the transdentinal cytotoxic effects of this cariostatic agent on pulp cells.

A new approach for professional dental bleaching using a polymeric catalyst primer.

OBJECTIVE: Evaluate the influence of a polymeric catalyst primer (PCP) on esthetic efficacy (EE), degradation kinetics of hydrogen peroxide (H2 O2 ), and trans-amelodentinal cytotoxicity (TC) of bleaching gels. MATERIALS AND METHODS: The following groups were established: G1: No treatment (NC, negative control); G2: PCP; G3: 10% H2 O2 ; G4: PCP + 10% H2 O2 ; G5: 20% H2 O2 ; G6: PCP + 20% H2 O2 ; G7: 35% H2 O2 (positive control); G8: PCP + 35% H2 O2 . To determine EE, enamel/dentin discs (E/DDs) were stained and subjected or not to bleaching protocols for 45 min. To assess TC, the E/DDs were adapted to artificial pulp chambers. The extracts (culture medium + gel components diffused through E/DDs) were applied to odontoblast-like MDPC-23 cells. The viability (VB), oxidative stress (OxS), morphology (SEM), amount of H2 O2 diffused and the production of hydroxyl radical (OH• ) were assessed (two-way ANOVA/Tukey/paired Student t-test; p < 0.05). RESULTS: The highest EE was found in G8 (p < 0.05), and G4, G6, and G7 did not differ statistically (p > 0.05). In G4, the limited H2 O2 diffusion reduced OxS and increased cell VB (p < 0.05). CONCLUSIONS: Coating the enamel with PCP containing 10 mg/ml of manganese oxide before applying the 10% H2 O2 bleaching gel maintains the EE of conventional in-office bleaching and minimizes the toxic effects of this esthetic therapy. CLINICAL SIGNIFICANCE: Coating the enamel with a PCP before applying the bleaching gel may potentiate the EE of the conventional in-office tooth bleaching and reduce the toxicity of this professional therapy to the dental pulp.

Transdentinal cytotoxicity of resin luting cements using the bovine and human dentin barrier.

STATEMENT OF PROBLEM: Based upon ethical questions and because of the difficulty of obtaining intact human teeth, researchers have used bovine teeth to assess the physical and mechanical properties of different dental materials. However, data from transdentinal cytotoxicity tests showing that the bovine dentin barrier is similar to the human dentin barrier is lacking. PURPOSE: The purpose of this in vitro study was to evaluate whether the bovine dentin barrier produces similar results to those obtained when the human dentin barrier is used to assess the transdentinal cytotoxicity of resin luting cements. MATERIAL AND METHODS: The number and diameter of dentinal tubules present in the human dentin barrier and bovine dentin barrier were evaluated and assessed with a t test (α=.05). After inserting the standardized dentin barriers into artificial pulp chambers, murine dental papilla-derived cells (MDPC-23) were seeded on the pulpal surface of the specimens, and the luting cements were applied to their occlusal surfaces. Then, the following groups were established for both human and bovine dentin barriers: no treatment (negative control); Single Bond Universal; RelyX Luting 2; RelyX U200; and RelyX Ultimate. After 24 hours, the viability (alamarBlue) and morphology (scanning electron microscopy) of the cells were evaluated with a 2-way analysis of variance and the Tukey honest significance test (α=.05). RESULTS: Dentinal tubules with larger diameters were observed in bovine dentin (P<.05), but the number of tubules was similar (P>.05). A reduction in viability and notable changes in the morphology of MDPC-23 cells occurred in the Single Bond Universal and RelyX Luting 2 groups in comparison with the negative control (P<.05). The RelyX U200 and RelyX Ultimate groups were statistically similar to the negative control (P>.05). No difference was found in cytotoxicity when the same luting cement was applied on human or bovine dentin barriers (P>.05). CONCLUSIONS: For transdentinal cytotoxicity tests of resin luting cements, the bovine dentin barrier proved similar results to the human dentin barrier.

In vivo antifungal activity and biocompatibility of Cryptocarya moschata.

The objective of this study was evaluate, in vivo model, the antifungal activity of Cryptocarya moschata extract against Candida albicans and its biocompatibility. The animals (N = 50) were divided into groups (n = 5): CI/CG: candidiasis was induced and treated with C. moschata extract (0.045 g/mL); CI/NG: candidiasis was induced and treated with nystatin; CI/NT: candidiasis was induced and no treated; CI/CG-2: candidiasis was induced and treated with C. moschata extract (0.045 g/mL), reapplied after 24 h; CI/NG-2: candidiasis was induced and treated with nystatin, reapplied after 24 h; NCI/NT: candidiasis was not induced and no treated; NCI/CG: candidiasis was not induced and treated with C. moschata extract (0.045 g/mL); NCI/NG: candidiasis was not induced treated with nystatin; NCI/CG-2: candidiasis was not induced and treated with C. moschata extract (0.045 g/mL), reapplied after 24 h; NCI/NG-2: candidiasis was not induced and treated with nystatin, reapplied after 24 h. The fungi present in the lingual dorsum of mice were collected and analyzed by the count of colony-forming units. In addition, histological analysis was performed. Histologically, there was no cell damage in the mice's tongue, and there was a decrease in Candida biofilm, similar to the use of nystatin. It was concluded that the C. moschata extract was effective against C. albicans and was biocompatible.

Imaging the electrostatic landscape of unstrained self-assemble GaAs quantum dots.

Unstrained GaAs quantum dots are promising candidates for quantum information devices due to their optical properties, but their electronic properties have remained relatively unexplored until now. In this work, we systematically investigate the electronic structure and natural charging of GaAs quantum dots at room temperature using Kelvin probe force microscopy (KPFM). We observe a clear electrical signal from these structures demonstrating a lower surface potential in the middle of the dot. We ascribe this to charge accumulation and confinement inside these structures. Our systematical investigation reveals that the change in surface potential is larger for a nominal dot filling of 2 nm and then starts to decrease for thicker GaAs layers. Usingk·pcalculation, we show that the confinement comes from the band bending due to the surface Fermi level pinning. We find a correlation between the calculated charge density and the KPFM signal indicating thatk·pcalculations could be used to estimate the KPFM signal for a given structure. Our results suggest that these self-assembled structures could be used to study physical phenomena connected to charged quantum dots like Coulomb blockade or Kondo effect.

Poly(caprolactone)-aligned nanofibers associated with fibronectin-loaded collagen hydrogel as a potent bioactive scaffold for cell-free regenerative endodontics.

AIM: Guided tissue regeneration has been considered a promising strategy to replace conventional endodontic therapy of teeth with incomplete root formation. Therefore, the objective of this study was to develop a tubular scaffold (TB-SC) with poly (caprolactone)-aligned nanofibres associated with a fibronectin (FN)-loaded collagen hydrogel and assess the pulp regeneration potential mediated by human apical papilla cells (hAPCs) using an in vitro model of teeth with incomplete root formation. METHODOLOGY: Aligned nanofibre strips based on 10% poly(caprolactone) (PCL) were synthesized with the electrospinning technique to produce the TB-SCs. These were submitted to different treatments, according to the following groups: TB-SC (negative control): TB-SC without treatment; TB-SC + FN (positive control): TB-SC coated with 10 µg/ml of FN; TB-SC + H: TB-SC associated with collagen hydrogel; TB-SC + HFN: TB-SC associated with FN-loaded collagen hydrogel. Then, the biomaterials were inserted into cylindrical devices to mimic the regenerative therapy of teeth with incomplete root formation. The hAPCs were seeded on the upper surface of the TB-SCs associated or not with any treatment, and cell migration/proliferation and the gene expression of markers related to pulp regeneration (ITGA5, ITGAV, COL1A1 and COL1A3) were evaluated. The data were submitted to anova/Tukey's tests (α = 5%). RESULTS: Higher values of cell migration/proliferation and gene expression of all markers tested were observed in groups TB-SC + FN, TB-SC + H, and TB-SC + HFN compared with the TB-SC group (p < .05). The hAPCs in the TB-SC + HFN group showed the highest values of cell proliferation and gene expression of COL1A1 and COL3A1 (p < .05), as well as superior cell migration results to groups TB-SC and TB-SC + H (p < .05). CONCLUSION: Aligned nanofibre scaffolds associated with the FN-loaded collagen hydrogel enhanced the migration and proliferation of hAPCs and gene expression of pulp regeneration markers. Therefore, the use of these biomaterials may be considered an interesting strategy for regenerative pulp therapy of teeth with incomplete root formation.

Regulation of interleukin-6 and matrix metalloproteinases syntheses by bioflavonoids and photobiomodulation in human gingival fibroblasts.

This study aimed to evaluate the separately effects of bioflavonoids proanthocyanidins, from grape seed extract (GSE) and synthetic naringenin (NA), as well as photobiomodulation (PBM) by low-level laser therapy on interleukin (IL)-6 and matrix metalloproteinases (MMPs) syntheses by human gingival fibroblasts (HGF). For this purpose, a connective tissue exposure (ulceration) model of HGF, stimulated with tumor necrosis factor-alpha (TNF-α), was used. Initially, the highest non-cytotoxic and non-genotoxic concentrations of bioflavonoids were determined by cell viability and micronuclei formation assays. Then, HGF were exposed to different stimuli: culture medium (negative control), dimethyl sulfoxide (DMSO), TNF-α, NA, GSE, TNF-α + NA, TNF-α + GSE, PBM (3 J/cm2, 0.025 W, 780 nm), and TNF-α + PBM. Next, IL-6, MMP-2, and MMP-9 syntheses were assessed. The concentration of 10 µg/mL of bioflavonoids increased cell viability at 24 and 48 h and did not present cytotoxic or genotoxic effects on HGF after 24, 48, and 72 h of contact. This concentration was selected for the assessment of bioflavonoids potential in modulating inflammatory mediators. TNF-α exposure enhanced IL-6 (170%), MMP-2 (10%), and MMP-9 (20%) syntheses, while a decrease of MMP-2 by 55% after exposure to TNF-α + GSE and 20% after TNF-α + NA and TNF-α + PBM was observed. MMP-9 synthesis was decreased by 35% after TNF-α + NA, 20% after TNF-α + GSE, and 30% after PBM. IL-6 was down-regulated by GSE in the presence of TNF-α (80%). In conclusion, TNF-α up-regulated IL-6 and MMPs, while bioflavonoids and PBM down-regulated MMP-2 and MMP-9 syntheses; GSE also decreased IL-6 synthesis, demonstrating the individual promising potential of these therapies for ulceration management.

Improved esthetic efficacy and reduced cytotoxicity are achieved with a violet LED irradiation of manganese oxide-enriched bleaching gels.

Gels with high concentrations of hydrogen peroxide (H2O2) have been associated with cytotoxicity and consequent post-bleaching tooth sensitivity. This study assessed the bleaching efficacy (BE) and cytotoxicity (CT) of bleaching gels with low concentrations of H2O2 containing manganese oxide (MnO2) and photocatalyzed with violet LED (LEDv). The following groups were established: G1: no treatment (negative control, NC); G2: 35% H2O2 (positive control, PC); G3: LEDv; G4: 10% H2O2; G5: 6% H2O2; G6: 10% H2O2 + MnO2 + LEDv; G7: 6% H2O2 + MnO2 + LEDv. To analyze BE, standardized enamel/dentin discs (E/DDs) were subjected to the bleaching procedures for 45 min (1 session). The color change was determined before and after performing the bleaching protocols (ΔE00; ΔWI). To analyze CT, the E/DDs were adapted to artificial pulp chambers, and the extracts (culture medium + diffused gel components) were applied to cultured odontoblast-like MDPC-23 cells. Then, the cells were assessed concerning their viability (VB), oxidative stress (OxS), and Live/Dead. The amount of H2O2 diffused was also determined (ANOVA/Tukey; p < 0.05). Cell viability decreased in all bleached groups compared to G1 (NC; p < 0.05). The cells in G6 and G7 presented higher viability than in G2, G4, and G5 (p < 0.05). The BE in G7 was similar to G2 (PC; p < 0.05). The lowest OxS and H2O2 diffusion values were found in G6 and G7, compared to the other bleached groups (G2, G4, and G5; p < 0.05). The 6% H2O2 bleaching gel (G7) submitted to both methods of catalysis (MnO2 + LEDv) caused only a mild cytotoxicity and maintained the excellent esthetic outcome promoted by in-office conventional tooth bleaching.

Photobiomodulation effect of red LED (630 nm) on the free radical levels produced by pulp cells under stress conditions.

The aim of this study was to assess the ability of red light emitting diodes (LED) to modulate oxidative stress in human dental pulp fibroblasts (HDPFs) when different irradiation parameters are employed. Cells from primary teeth were seeded (100,000 cells/well) in 24-well plates in culture medium (DMEM). At 24 h after incubation, the culture medium was replaced with DMEM containing 10 µg/mL lipopolysaccharide (LPS). Thereafter, the cells were irradiated (LED 630 nm, 0.04 W/cm2 and 0.08 W/cm2) at 0 J/cm2 (control group), 4 J/cm2, 15 J/cm2, and 30 J/cm2; and their viability (MTT assay), number (Trypan Blue), synthesis of nitric oxide (NO) (Griess reagent), and reactive oxygen species (ROS) (fluorescence probe, DCFH-DA) were assessed. The Kruskal-Wallis and Mann-Whitney statistical tests using Bonferroni correction were employed (significance level of 5%). Compared to that in control fibroblasts, increased viability was observed in HDPFs exposed to LPS and irradiated with 15 J/cm2 and 30 J/cm2 at 0.04 W/cm2 and 4 J/cm2 and 15 J/cm2 at 0.08 W/cm2 (p < 0.05). Exposure to 4 J/cm2 at 0.04 W/cm2 and 15 J/cm2 and 30 J/cm2 at 0.08 W/cm2 modulated the oxidative stress in cells relative to that observed in non-irradiated LPS-treated pulp cells (p < 0.05). It was concluded that the irradiation strategies of using red LED with radiant exposures of 15 J/cm2 and 30 J/cm2 at 0.04 W/cm2 and 15 J/cm2 at 0.08 W/cm2 were the best parameters to decrease NO and ROS concentration and to stimulate viability of HDPFs exposed to LPS challenge.

Photobiomodulation using LLLT and LED of cells involved in osseointegration and peri-implant soft tissue healing.

This study evaluated the influence of photobiomodulation (PBM) using low-level laser therapy (PBM/LLLT) or light-emitting diode (PBM/LED) therapy on peri-implant tissue healing. A laboratory model was used to assess the adhesion and metabolism of osteoblasts (SaOs-2), human gingival fibroblasts (HGF), and normal oral keratinocytes (NOK) seeded on a titanium (Ti) surface. After seeding the cells on disks of Ti placed in wells of 24-well plates, three irradiations were performed every 24 h at energy density of 3 J/cm2. For PBM/LLLT, a LaserTABLE device was used with a wavelength of 780 nm and 25 mW, while for PBM/LED irradiation, a LEDTABLE device was used at 810 nm, 20 mW, at a density of 3 J/cm2. After irradiations, the number of cells (NC) attached and spread on the Ti surface, cell viability (CV), total protein (TP), and collagen (Col) synthesis were assessed. Alkaline phosphate activity (ALP) was evaluated only for SaOs-2. Data were submitted to ANOVA complemented by Turkey statistical tests at a 5% significance level. PBM significantly increased adherence of NOK to the Ti surface, while no significant effect was observed for SaOs-2 and HGF. PBM positively affected CV, as well as Col and TP synthesis, in distinct patterns according to the cell line. Increased ALP activity was observed only in those cells exposed to PBM/LLLT. Considering cell specificity, this investigation reports that photobiomodulation with low-power laser and LED at determined parameters enhances cellular functions related to peri-implant tissue healing in a laboratory model.

Cytocompatibility and bioactivity of calcium hydroxide-containing nanofiber scaffolds loaded with fibronectin for dentin tissue engineering.

OBJECTIVES: The aim of this study was to characterize polycaprolactone-based nanofiber scaffolds (PCL) incorporated with calcium hydroxide (CH) and evaluate their bioactivity on human dental pulp cells (HDPCs) when loaded with fibronectin (FN). MATERIALS AND METHODS: CH (0.1%; 0.2%; 0.4% w/v; or 0%) was incorporated into PCL (10% w/v) scaffolds prepared by electrospinning. Morphology and composition were characterized using SEM/EDS. HDPCs were seeded on the scaffolds and evaluated for viability (alamarBlue; Live/Dead), and adhesion/spreading (F-actin). Next, scaffolds containing 0.4% CH were loaded with FN (20 µg/mL). HDPCs were evaluated for viability, adhesion/spreading, migration (Trans-well), gene expression (RT-qPCR), alkaline phosphatase activity (ALP), and mineralization nodules (Alizarin Red). Data were submitted to ANOVA and post-hoc tests (α = 5%). RESULTS: Nanofibers with larger diameter were seen as CH concentration increased, while there was no effect on interfibrillar spaces. An increase in cell viability was seen for 0.4% CH, in all periods. Incorporation of CH and FN into the scaffolds increased cellular migration, spread, and viability, all intensified when CH and FN were combined. ALPL and DSPP expression, and ALP activity were not affected by CH and FN. COL1A1 was downregulated in all groups, while DMP1 was upregulated in the presence of CH, with no differences for the groups loaded with FN. CH increased the formation of mineralized matrix, which was not influenced by FN. CONCLUSIONS: In conclusion, the incorporation of CH enhanced the odontogenic potential of HDPCs, irrespective of the presence of FN. The PCL + 0.4% CH formulation may be a useful strategy for use in dentin tissue engineering. CLINICAL RELEVANCE: A change in the form of presentation of calcium hydroxide-based materials used for direct pulp capping can increase biocompatibility and prolong the vitality of dental pulp.

Manganese oxide increases bleaching efficacy and reduces the cytotoxicity of a 10% hydrogen peroxide bleaching gel.

OBJECTIVE: The study aims to assess the effects of a 10% H2O2 bleaching gel with different MnO2 concentrations on the bleaching efficacy (BE), degradation kinetics (DK) of H2O2, and trans-amelodentinal cytotoxicity (TC). MATERIALS AND METHODS: Standardized bovine enamel/dentin disks (n = 96) were placed in artificial pulp chambers, and the bleaching gels were applied for 45 min. Thus, the following groups were established: (G1) no treatment (negative control/NC); (G2) 35% H2O2 (positive control/PC); (G3) 10% H2O2; (G4) 10% H2O2 + 2 mg/mL MnO2; (G5) 10% H2O2 + 6 mg/mL MnO2; and (G6) 10% H2O2 + 10 mg/mL MnO2. After analyzing bleaching efficacy (ΔE00 and ΔWI), the degradation kinetics of H2O2 and trans-amelodentinal cytotoxicity were determined (n = 8, ANOVA/Tukey; p < 0.05). RESULTS: G6 presented BE (ΔE00 and ΔWI) statistically similar to G2, which represented conventional in-office bleaching (p = 0.6795; p > 0.9999). A significant reduction in the diffusion of H2O2 occurred in G3, G4, G5, and G6 compared to G2 (p < 0.0001). The highest DK of H2O2 occurred in G6 (p < 0.0001), which had the lowest TC in comparison with all other bleached groups (p ≤ 0.0186). CONCLUSION: The addition of 10 mg/mL of MnO2 in a 10% H2O2 bleaching gel potentiates the degradation of this reactive molecule, which increases the BE of the product and decreases TC. CLINICAL SIGNIFICANCE: Replacing a 35% H2O2 gel commonly used for conventional in-office dental bleaching by a 10% H2O2 gel containing 10 mg/mL of MnO2 reduces the cytotoxicity of this professional therapy, maintaining its excellent esthetic efficacy.

Strategy for reducing cytotoxicity and obtaining esthetic efficacy with 15 min of in-office dental bleaching.

OBJECTIVES: Evaluate in vitro the esthetic efficacy and cytotoxicity of a bleaching gel containing 35% hydrogen peroxide (BG-35%H2O2), applied for different time intervals, on enamel coated or not with polymeric biomaterials. MATERIALS AND METHODS: Nanofiber scaffolds (NSc) and a primer catalyst (PrCa) were used to coat the bovine enamel/dentin discs before the application of BG-35%H2O2, according to the following groups: G1-negative control (NC, without treatment); G2, G3, and G4-BG-35%H2O2 applied for 3 × 15, 2 × 15, and 15 min; G5, G6, and G7-BG-35%H2O2 applied on enamel coated with NSc and PrCa for 3 × 15; 2 × 15, and 15 min, respectively. The culture medium with components of gel diffused through the discs was applied on MDPC-23 cells, which were evaluated regarding to viability (VB), integrity of the membrane (IM), and oxidative stress (OxS). The quantity of H2O2 diffused and esthetic efficacy (ΔE/ΔWI) of the dental tissues were also analyzed (ANOVA/Tukey; p < 0.05). RESULTS: Only G7 was similar to G1 regarding VB (p > 0.05). The lowest value of H2O2 diffusion occurred in G4 and G7, where the cells exhibited the lowest OxS than G2 (p < 0.05). Despite G5 showing the greatest ΔE regarding other groups (p < 0.05), the esthetic efficacy observed in G7 was similar to G2 (p > 0.05). ΔWI indicated a greater bleaching effect for groups G5, G6, and G7 (p < 0.05). CONCLUSION: Coating the dental enamel with polymeric biomaterials reduced the time and the cytotoxicity of BG-35%H2O2. CLINICAL SIGNIFICANCE: Coating the dental enamel with polymeric biomaterials allows safer and faster BG-35%H2O2 application.

An organotypic model of oral mucosa cells for the biological assessment of 3D-printed resins for interim restorations.

STATEMENT OF PROBLEM: Three-dimensionally (3D) printed resins have become popular as a new class of materials for making interim restorations. However, little is known about how the fabrication parameters can influence biological compatibility with oral tissues. PURPOSE: The purpose of this in vitro study was to evaluate the effect of the postpolymerization time on the cytotoxicity of resins for printing interim restorations by using a 3D organotypic model of the oral mucosa. MATERIAL AND METHODS: Cylindrical specimens were prepared with conventional acrylic resin (AR), computer-aided design and computer-aided manufacture (CAD-CAM) resin (CC), composite resin (CR), and 2 resins for 3D printing (3DP) marketed as being biocompatible. The 3DPs were submitted to postpolymerization in an ultraviolet (UV) light chamber for 1, 10, or 20 minutes (90 W, 405 nm). Standard specimens of the materials were incubated for 1, 3, and 7 days in close contact with an organotypic model of keratinocytes (NOK-Si) in coculture with gingival fibroblasts (HGF) in a 3D collagen matrix, or directly with 3D HGF cultures. Then, the viability (Live/Dead n=2) and metabolism (Alamar Blue n=6) of the cells were assessed. Spectral scanning of the culture medium was performed to detect released components (n=6) and assessed statistically with ANOVA and the Tukey post hoc test (α=.05). RESULTS: Severe reduction of metabolism (>70%) and viability of keratinocytes occurred for 3DP resin postpolymerized for 1 minute in all periods of analysis in a time-dependent manner. The decrease in cell metabolism and viability was moderate for the 3D culture of HGFs in both experimental models, correlated with the intense presence of resin components in the culture medium. The resins postpolymerized for 10 and 20 minutes promoted a mild-moderate cytotoxic effect in the period of 1 day, similar to AR. However, recovery of cell viability occurred at the 7-day incubation period. The 3DP resins submitted to postpolymerization for 20 minutes showed a pattern similar to that of CR and CC at the end of the experiment. CONCLUSIONS: The cytotoxic potential of the tested 3DP resins on oral mucosa cells was influenced by postprinting processing, which seemed to have been related with the quantity of residual components leached.

Beverages Rich in Resveratrol and Physical Activity Attenuate Metabolic Changes Induced by High-Fat Diet.

Consumption of saturated fat causes deleterious effects on health, which could be minimized through physical activity and foods with functional characteristics consumption. The aim of the study was to evaluate the beverage rich in resveratrol consumption and physical exercise in gut microbiota, body composition, lipid peroxidation, interleukin-6 (IL6) concentration and systolic blood pressure (SBP) of rats to the high-fat diet. Wistar rats were fed with control diet, high-fat diet (HFD), HFD and 15 mL solution of resveratrol, HFD and 15 mL of grape juice, HFD and 10 mL of red wine. All animals performed the physical training protocol five days a week. Grape juice and red wine composition were analyzed, SBP, body mass, consumption, adiposity and body composition, gut microbiota, lipid peroxidation and inflammation were evaluated. The grape juice (114.8 ± 22.5 mmHG) and red wine (129 ± 15.8 mmHg) groups showed lower SBP when compared to HFD (216.8 ± 20.6 mmHg) (p < 0.0001). The grape juice group (GJG) (39.1 ± 7) had a higher number of microbiota bands DNA when compared to the other groups (p = 0.002). The GJG (33.7 ± 6.7 pg/mL) presented lower concentration IL6 when compared to high-fat group (47.3 ± 16 pg/mL) (p = 0.003). GJG (4.7 ± 1.2 nmol/L) presented a lower concentration of TBARS when compared to control group (6.1 ± 1.4 nmol/L) and resveratrol group (6.6 ± 0.9 nmol/L), and the red wine group (7.4 ± 1.2 nmol/L) had a higher concentration of TBARS when compared to control group and GJG (p = 0.0001). The consumption of these beverages, especially grape juice, together with physical exercise, was able to promote beneficial changes even in the presence of a HFD.