Environmental sources of radio frequency noise: potential impacts on magnetoreception.

Radio frequency electromagnetic noise (RF) of anthropogenic origin has been shown to disrupt magnetic orientation behavior in some animals. Two sources of natural RF might also have the potential to disturb magnetic orientation behavior under some conditions: solar RF and atmospheric RF. In this review, we outline the frequency ranges and electric/magnetic field magnitudes of RF that have been shown to disturb magnetoreceptive behavior in laboratory studies and compare these to the ranges of solar and atmospheric RF. Frequencies shown to be disruptive in laboratory studies range from 0.1 to 10 MHz, with magnetic magnitudes as low as 1 nT reported to have effects. Based on these values, it appears unlikely that solar RF alone routinely disrupts magnetic orientation. In contrast, atmospheric RF does sometimes exceed the levels known to disrupt magnetic orientation in laboratory studies. We provide a reference for when and where atmospheric RF can be expected to reach these levels, as well as a guide for quantifying RF measurements.

Characterization of an underwater metamaterial made of aluminum honeycomb panels at low frequencies.

This paper presents a method to characterize the effective properties of inertial acoustic metamaterial unit cells for underwater operation. The method is manifested by a fast and reliable parameter retrieval procedure utilizing both numerical simulations and measurements. The effectiveness of the method was proved to be self-consistent by a metamaterial unit cell composed of aluminum honeycomb panels with soft rubber spacers. Simulated results agree well with the measured responses of this metamaterial in a water-filled resonator tube. A sub-unity density ratio and an anisotropic mass density are simultaneously achieved by the metamaterial unit cell, making it useful in implementations of transformation acoustics. The metamaterial, together with the approach for its characterization, are expected to be useful for underwater acoustic devices.

Programmable Acoustic Metasurfaces.

Metasurfaces open up unprecedented potential for wave engineering using subwavelength sheets. However, a severe limitation of current acoustic metasurfaces is their poor reconfigurability to achieve distinct functions on demand. Here a programmable acoustic metasurface that contains an array of tunable subwavelength unit cells to break the limitation and realize versatile two-dimensional wave manipulation functions is reported. Each unit cell of the metasurface is composed of a straight channel and five shunted Helmholtz resonators, whose effective mass can be tuned by a robust fluidic system. The phase and amplitude of acoustic waves transmitting through each unit cell can be modulated dynamically and continuously. Based on such mechanism, the metasurface is able to achieve versatile wave manipulation functions, by engineering the phase and amplitude of transmission waves in the subwavelength scale. Through acoustic field scanning experiments, multiple wave manipulation functions, including steering acoustic waves, engineering acoustic beams, and switching on/off acoustic energy flow by using one design of metasurface are visually demonstrated. This work extends the metasurface research and holds great potential for a wide range of applications including acoustic imaging, communication, levitation, and tweezers.

Single-sensor multispeaker listening with acoustic metamaterials.

Designing a "cocktail party listener" that functionally mimics the selective perception of a human auditory system has been pursued over the past decades. By exploiting acoustic metamaterials and compressive sensing, we present here a single-sensor listening device that separates simultaneous overlapping sounds from different sources. The device with a compact array of resonant metamaterials is demonstrated to distinguish three overlapping and independent sources with 96.67% correct audio recognition. Segregation of the audio signals is achieved using physical layer encoding without relying on source characteristics. This hardware approach to multichannel source separation can be applied to robust speech recognition and hearing aids and may be extended to other acoustic imaging and sensing applications.

Tunable Asymmetric Transmission via Lossy Acoustic Metasurfaces.

In this study, we show that robust and tunable acoustic asymmetric transmission can be achieved through gradient-index metasurfaces by harnessing judiciously tailored losses. We theoretically prove that the asymmetric wave behavior stems from loss-induced suppression of high order diffraction. We further experimentally demonstrate this novel phenomenon. Our findings could provide new routes to broaden applications for lossy acoustic metamaterials and metasurfaces.

Anisotropic acoustic metafluid for underwater operation.

The paper presents a method to design and characterize mechanically robust solid acoustic metamaterials suitable for operation in dense fluids such as water. These structures, also called metafluids, behave acoustically as inertial fluids characterized by anisotropic mass densities and isotropic bulk modulus. The method is illustrated through the design and experimental characterization of a metafluid consisting of perforated steel plates held together by rubber coated magnetic spacers. The spacers are very effective at reducing the effective shear modulus of the structure, and therefore effective at minimizing the ensuing coupling between the shear and pressure waves inside the solid effective medium. Inertial anisotropy together with fluid-like acoustic behavior are key properties that bring transformation acoustics in dense fluids closer to reality.

Three-dimensional broadband omnidirectional acoustic ground cloak.

The control of sound propagation and reflection has always been the goal of engineers involved in the design of acoustic systems. A recent design approach based on coordinate transformations, which is applicable to many physical systems, together with the development of a new class of engineered materials called metamaterials, has opened the road to the unconstrained control of sound. However, the ideal material parameters prescribed by this methodology are complex and challenging to obtain experimentally, even using metamaterial design approaches. Not surprisingly, experimental demonstration of devices obtained using transformation acoustics is difficult, and has been implemented only in two-dimensional configurations. Here, we demonstrate the design and experimental characterization of an almost perfect three-dimensional, broadband, and, most importantly, omnidirectional acoustic device that renders a region of space three wavelengths in diameter invisible to sound.

Broadband Acoustic Hyperbolic Metamaterial.

In this Letter, we report on the design and experimental characterization of a broadband acoustic hyperbolic metamaterial. The proposed metamaterial consists of multiple arrays of clamped thin plates facing the y direction and is shown to yield opposite signs of effective density in the x and y directions below a certain cutoff frequency, therefore, yielding a hyperbolic dispersion. Partial focusing and subwavelength imaging are experimentally demonstrated at frequencies between 1.0 and 2.5 kHz. The proposed metamaterial could open up new possibilities for acoustic wave manipulation and may find usage in medical imaging and nondestructive testing.

Measurement of a broadband negative index with space-coiling acoustic metamaterials.

We report the experimental demonstration of a broadband negative refractive index obtained in a labyrinthine acoustic metamaterial structure. Two different approaches were employed to prove the metamaterial negative index nature: one-dimensional extractions of effective parameters from reflection and transmission measurements and two-dimensional prism-based measurements that convincingly show the transmission angle corresponding to negative refraction. The transmission angles observed in the latter case also agree very well with the refractive index obtained in the one-dimensional measurements and numerical simulations. We expect this labyrinthine metamaterial to become the unit cell of choice for practical acoustic metamaterial devices that require broadband and significantly negative indices of refraction.

Ultra-sparse near-perfect sound absorbers.

There is a trade-off between the sparseness of an absorber array and its sound absorption imposed by wave physics. Here, near-perfect absorption (99% absorption) is demonstrated when the spatial period of monopole-dipole resonators is close to one working wavelength (95% of the wavelength). The condition for perfect absorption is to render degenerate monopole-dipole resonators critically coupled. Frequency domain simulations, eigenfrequency simulations, and the coupled mode theory are utilized to demonstrate the acoustic performances and the underlying physics. The sparse-resonator-based sound absorber could greatly benefit noise control with air flow and this study could also have implications for electromagnetic wave absorbers.

Design of an acoustic metamaterial lens using genetic algorithms.

The present work demonstrates a genetic algorithm approach to optimizing the effective material parameters of an acoustic metamaterial. The target device is an acoustic gradient index (GRIN) lens in air, which ideally possesses a maximized index of refraction, minimized frequency dependence of the material properties, and minimized acoustic impedance mismatch. Applying this algorithm results in complex designs with certain common features, and effective material properties that are better than those present in previous designs. After modifying the optimized unit cell designs to make them suitable for fabrication, a two-dimensional lens was built and experimentally tested. Its performance was in good agreement with simulations. Overall, the optimization approach was able to improve the refractive index but at the cost of increased frequency dependence. The optimal solutions found by the algorithm provide a numerical description of how the material parameters compete with one another and thus describes the level of performance achievable in the GRIN lens.

Achromatic metasurfaces by dispersion customization for ultra-broadband acoustic beam engineering.

Metasurfaces, the ultra-thin media with extraordinary wavefront modulation ability, have shown great promise for many potential applications. However, most of the existing metasurfaces are limited by narrow-band and strong dispersive modulation, which complicates their real-world applications and, therefore require strict customized dispersion. To address this issue, we report a general methodology for generating ultra-broadband achromatic metasurfaces with prescribed ultra-broadband achromatic properties in a bottom-up inverse-design paradigm. We demonstrate three ultra-broadband functionalities, including acoustic beam deflection, focusing and levitation, with relative bandwidths of 93.3%, 120% and 118.9%, respectively. In addition, we reveal a relationship between broadband achromatic functionality and element dispersion. All metasurface elements have anisotropic and asymmetric geometries with multiple scatterers and local cavities that synthetically support internal resonances, bi-anisotropy and multiple scattering for ultra-broadband customized dispersion. Our study opens new horizons for ultra-broadband highly efficient achromatic functional devices, with promising extension to optical and elastic metamaterials.

Experimental acoustic ground cloak in air.

We present the design, fabrication, and performance analysis for a class of two-dimensional acoustic cloaking coatings in air. Our approach takes advantage of transformation acoustics and linear coordinate transformations that result in shells which are homogeneous, broadband, and compact. The required material parameters are highly anisotropic; however, we show that they are easily achievable in practice in metamaterials made of perforated plastic plates. The good performance of the fabricated design is assessed from measurements of the sound field produced around the cloak by a broadband source. The remarkably low complexity of the device made of perforated plastic plates shows that sound in air can be fully and effectively manipulated using realizable transformation acoustics devices.

Acoustic tweezer with complex boundary-free trapping and transport channel controlled by shadow waveguides.

Acoustic tweezers use ultrasound for contact-free, bio-compatible, and precise manipulation of particles from millimeter to submicrometer scale. In microfluidics, acoustic tweezers typically use an array of sources to create standing wave patterns that can trap and move objects in ways constrained by the limited complexity of the acoustic wave field. Here, we demonstrate spatially complex particle trapping and manipulation inside a boundary-free chamber using a single pair of sources and an engineered structure outside the chamber that we call a shadow waveguide. The shadow waveguide creates a tightly confined, spatially complex acoustic field inside the chamber without requiring any interior structure that would interfere with net flow or transport. Altering the input signals to the two sources creates trapped particle motion along an arbitrary path defined by the shadow waveguide. Particle trapping, particle manipulation and transport, and Thouless pumping are experimentally demonstrated.

Phase conjugation and negative refraction using nonlinear active metamaterials.

We present an experimental demonstration of phase conjugation using nonlinear metamaterial elements. Active split-ring resonators loaded with varactor diodes are demonstrated theoretically to act as phase-conjugating or time-reversing discrete elements when parametrically pumped and illuminated with appropriate frequencies. The metamaterial elements were fabricated and shown experimentally to produce a time-reversed signal. Measurements confirm that a discrete array of phase-conjugating elements act as a negatively refracting time-reversal rf lens only 0.12λ thick.

Sound vortex diffraction via topological charge in phase gradient metagratings.

Wave fields with orbital angular momentum (OAM) have been widely investigated in metasurfaces. By engineering acoustic metasurfaces with phase gradient elements, phase twisting is commonly used to obtain acoustic OAM. However, it has limited ability to manipulate sound vortices, and a more powerful mechanism for sound vortex manipulation is strongly desired. Here, we propose the diffraction mechanism to manipulate sound vortices in a cylindrical waveguide with phase gradient metagratings (PGMs). A sound vortex diffraction law is theoretically revealed based on the generalized conservation principle of topological charge. This diffraction law can explain and predict the complicated diffraction phenomena of sound vortices, as confirmed by numerical simulations. To exemplify our findings, we designed and experimentally verified a PGM based on Helmholtz resonators that support asymmetric transmission of sound vortices. Our work provides previously unidentified opportunities for manipulating sound vortices, which can advance more versatile design for OAM-based devices.

Dispersion tuning and route reconfiguration of acoustic waves in valley topological phononic crystals.

The valley degree of freedom in crystals offers great potential for manipulating classical waves, however, few studies have investigated valley states with complex wavenumbers, valley states in graded systems, or dispersion tuning for valley states. Here, we present tunable valley phononic crystals (PCs) composed of hybrid channel-cavity cells with three tunable parameters. Our PCs support valley states and Dirac cones with complex wavenumbers. They can be configured to form chirped valley PCs in which edge modes are slowed to zero group velocity states, where the energy at different frequencies accumulates at different designated locations. They enable multiple functionalities, including tuning of dispersion relations for valley states, robust routing of surface acoustic waves, and spatial modulation of group velocities. This work may spark future investigations of topological states with complex wavenumbers in other classical systems, further study of topological states in graded materials, and the development of acoustic devices.

Acoustofluidic Holography for Micro- to Nanoscale Particle Manipulation.

Acoustic-based techniques can manipulate particles in a label-free, contact-free, and biocompatible manner. However, most previous work in acoustic manipulation has been constrained by axisymmetric patterns of pressure nodes and antinodes. Acoustic holography is an emerging technique that offers the potential to generate arbitrary pressure distributions which can be applied to particle manipulation with higher degrees of freedom. However, since current acoustic holography techniques rely on acoustic radiation forces, which decrease dramatically when the target particle size decreases, they have difficulty manipulating particles in the micro/nanoscale. Here, we introduce a holography technique that leverages both an arbitrary acoustic field and controllable fluid motion to offer an effective approach for manipulating micro/nano particles. Our approach, termed acoustofluidic holography (AFH), can manipulate a variety of materials, including cells, polymers, and metals, across sizes ranging from hundreds of micrometers to tens of nanometers.

Fast tomographic reconstruction strategy for diffuse optical tomography.

Diffuse Optical Tomography (DOT) has been growing significantly in the past two decades as a promising tool for in-vivo and non-invasive imaging of tissues using near-infrared light. It can improve our ability to probe complex biologic interactions dynamically and to study disease and treatment responses over time in near real time. Recent advances on the transfer of techniques from laboratory to clinics have led to the development of various diagnostic applications such as imaging of the female breast and infant brain. The potential value of the promising tool, however, can be limited by the reconstruction time for tomographically imaging tissue optical properties. The current solution procedure in DOT consumes a considerable amount of time due to discretization of the problem domain and nonlinear nature of tissue optical properties. It is becoming ever more important to develop faster imaging tools as measurement data sets increase in size as a result of the application of newer generation instruments. Here we provide a fast solution strategy that significantly reduces imaging effort for DOT. The fast imaging strategy adopts advanced model-order reduction (MOR) techniques for reducing system complexity, while preserving (to the greatest possible extent) system input-output behavior for the forward problem. Our results demonstrate that the MOR-based imaging method can be an order of magnitude faster than the conventional approach while maintaining a relatively small error tolerance. The goal is to develop inexpensive, noninvasive imaging system that can run at patient's bedside in real time and produce data continuously over a long period of time.