Prediction of a Cyclic Hydrogenated Boron Molecule as a Promising Building Block for Borophane.

We have extensively searched for a cyclic hydrogenated boron molecule that has a three-center two-electron bond at the center. Using first-principles calculations, we discovered a stable molecule of 2:4:6:8:-2H-1,5:1,5-µH-B8H10 and propose its existence. This molecule can be regarded as a building block for sheets of topological hydrogen boride (borophane), which was recently theoretically proposed and experimentally discovered. The electronic structure of the cyclic hydrogenated boron molecule is discussed in comparison with that of cyclic hydrogenated carbon molecules.

Retraction: Pentadiamond: A Hard Carbon Allotrope of a Pentagonal Network of sp

Retraction of DOI: 10.1103/PhysRevLett.125.016001.

Pentadiamond: A Hard Carbon Allotrope of a Pentagonal Network of sp

A pentagonal covalent network consisting of sp^{2} and sp^{3} C atoms has been investigated based on the density functional theory. Our theoretical investigations clarified that the pentagonal covalent network is a metastable three-dimensional carbon allotrope with the Fm3[over ¯]m space group possessing remarkable mechanical properties: relatively high bulk modulus of 381 GPa together with a negative Poisson's ratio of -0.241. Accordingly, the pentagonal covalent network possesses extremely high Young's and shear moduli of 1691 and 1113 GPa, respectively, surpassing those of the diamond. The electronic structure of the pentagonal network is a semiconductor with an indirect band gap of 2.52 eV between L and X points for valence and conduction band edges, respectively, with the relatively small carrier masses.

Band-Gap Engineering of Graphene Heterostructures by Substitutional Doping with B3 N3.

We investigated the energetics and electronic structure of B3 N3 -doped graphene employing density functional theory calculations with the generalized gradient approximation. Our calculations reveal that all of the B3 N3 -doped graphene structures are semiconducting, irrespective of the periodicity of the B3 N3 embedded into the graphene network. This is in contrast to graphene nanomeshes, which are either semiconductors or metals depending on the mesh arrangement. In B3 N3 -doped graphene, the effective masses for both electrons and holes are small. The band gap in the B3 N3 -doped graphene networks and the total energy of the B3 N3 -doped graphene are inversely proportional to the B3 N3 spacing. Furthermore, both properties depend on whether or not the graphene region possesses a Clar structure. In particular, the sheets with a Clar structure exhibit a wider band gap and a slightly lower total energy than those without a Clar structure.

Formation and Characterization of Hydrogen Boride Sheets Derived from MgB2 by Cation Exchange.

Two-dimensional (2D) materials are promising for applications in a wide range of fields because of their unique properties. Hydrogen boride sheets, a new 2D material recently predicted from theory, exhibit intriguing electronic and mechanical properties as well as hydrogen storage capacity. Here, we report the experimental realization of 2D hydrogen boride sheets with an empirical formula of H1B1, produced by exfoliation and complete ion-exchange between protons and magnesium cations in magnesium diboride (MgB2) with an average yield of 42.3% at room temperature. The sheets feature an sp2-bonded boron planar structure without any long-range order. A hexagonal boron network with bridge hydrogens is suggested as the possible local structure, where the absence of long-range order was ascribed to the presence of three different anisotropic domains originating from the 2-fold symmetry of the hydrogen positions against the 6-fold symmetry of the boron networks, based on X-ray diffraction, X-ray atomic pair distribution functions, electron diffraction, transmission electron microscopy, photo absorption, core-level binding energy data, infrared absorption, electron energy loss spectroscopy, and density functional theory calculations. The established cation-exchange method for metal diboride opens new avenues for the mass production of several types of boron-based 2D materials by countercation selection and functionalization.

Tuning localized transverse surface plasmon resonance in electricity-selected single-wall carbon nanotubes by electrochemical doping.

Localized surface-plasmon resonance affects the optical absorption and scattering of nanosized materials. The intensities and peak energies of the surface plasmons strongly depend on the carrier density; thus, the optical absorption peaks originating from the surface-plasmon resonance can be manipulated by the density of injected carriers. In single-wall carbon nanotubes (SWCNTs), the correct identification of surface-plasmon resonance modes is of great interest due to their emerging plasmonic and optoelectronic applications. Here, we demonstrate that high-carrier injection by electric double layers can induce a transverse surface-plasmon peak in aggregated, electricity-selected SWCNTs. In contrast to the well-discussed surface-plasmon resonance mode, whose polarization is parallel to the axis and whose resonance frequency is located in the THz region, our identified mode, which was normal to the axis, was located in the near-infrared range. In addition, our mode's peak position and intensities were tunable by carrier injections, indicating a route to control plasmonic optical processes by electric double-layer carrier injections using ionic liquid.

Charge manipulation in molecules encapsulated inside single-wall carbon nanotubes.

We report clear experimental evidence for the charge manipulation of molecules encapsulated inside single-wall carbon nanotubes (SWCNTs) using electrochemical doping techniques. We encapsulated ß-carotene (Car) inside SWCNTs and clarified electrochemical doping characteristics of their Raman spectra. C=C streching modes of encapsulated Car and a G band of SWCNTs showed clearly different doping behaviors as the electrochemical potentials were shifted. Electron extraction from encapsulated Car was clearly achieved. However, electrochemical characteristics of Car inside SWCNTs and doping mechanisms elucidated by calculations based on density-functional theory indicate the difficulty of charge manipulation of molecules inside SWCNTs due to the presence of strong on-site Coulomb repulsion energy at the molecules.

Photoinduced hydrogen release from hydrogen boride sheets.

Hydrogen boride nanosheets (HB sheets) are facilely synthesized via ion-exchange treatment on magnesium diboride (MgB2) in an acetonitrile solution. Optical absorption and fluorescence spectra of HB sheets indicate that their bandgap energy is 2.8 eV. According to first-principles calculations, optical absorption seen at 2.8 eV is assigned to the electron transition between the σ-bonding states of B and H orbitals. In addition, density functional theory (DFT) calculations suggest the other allowed transition from the σ-bonding state of B and H orbitals to the antibonding state with the gap of 3.8 eV. Significant gaseous H2 release is found to occur only under photoirradiation, which causes the electron transition from the σ-bonding state to the antibonding state even under mild ambient conditions. The amount of H2 released from the irradiated HB sheets is estimated to be 8 wt%, indicating that the sheets have a high H2-storage capacity compared with previously reported metal H2-storage materials.

Virtual substrate method for nanomaterials characterization.

Characterization techniques available for bulk or thin-film solid-state materials have been extended to substrate-supported nanomaterials, but generally non-quantitatively. This is because the nanomaterial signals are inevitably buried in the signals from the underlying substrate in common reflection-configuration techniques. Here, we propose a virtual substrate method, inspired by the four-point probe technique for resistance measurement as well as the chop-nod method in infrared astronomy, to characterize nanomaterials without the influence of underlying substrate signals from four interrelated measurements. By implementing this method in secondary electron (SE) microscopy, a SE spectrum (white electrons) associated with the reflectivity difference between two different substrates can be tracked and controlled. The SE spectrum is used to quantitatively investigate the covering nanomaterial based on subtle changes in the transmission of the nanomaterial with high efficiency rivalling that of conventional core-level electrons. The virtual substrate method represents a benchmark for surface analysis to provide 'free-standing' information about supported nanomaterials.

Gate-induced electron-state tuning of MoS2: first-principles calculations.

The electronic structure of electrostatically doped MoS2 thin films is investigated on the basis of first-principles total-energy calculations. We find that electron injection leads to a rapid downward shift in the energy of the unoccupied nearly free electron (NFE) state relative to other conduction bands. The NFE state finally crosses the Fermi level at an electron density of 0.81 × 10(14) cm(-2) that is attributable to the strong local electric field induced by charge accumulation near the surface. Electrons accommodated in the NFE state play an important role in determining the conducting properties of MoS2 thin films.

Flexible metallic nanowires with self-adaptive contacts to semiconducting transition-metal dichalcogenide monolayers.

In the pursuit of ultrasmall electronic components, monolayer electronic devices have recently been fabricated using transition-metal dichalcogenides. Monolayers of these materials are semiconducting, but nanowires with stoichiometry MX (M = Mo or W, X = S or Se) have been predicted to be metallic. Such nanowires have been chemically synthesized. However, the controlled connection of individual nanowires to monolayers, an important step in creating a two-dimensional integrated circuit, has so far remained elusive. In this work, by steering a focused electron beam, we directly fabricate MX nanowires that are less than a nanometre in width and Y junctions that connect designated points within a transition-metal dichalcogenide monolayer. In situ electrical measurements demonstrate that these nanowires are metallic, so they may serve as interconnects in future flexible nanocircuits fabricated entirely from the same monolayer. Sequential atom-resolved Z-contrast images reveal that the nanowires rotate and flex continuously under momentum transfer from the electron beam, while maintaining their structural integrity. They therefore exhibit self-adaptive connections to the monolayer from which they are sculpted. We find that the nanowires remain conductive while undergoing severe mechanical deformations, thus showing promise for mechanically robust flexible electronics. Density functional theory calculations further confirm the metallicity of the nanowires and account for their beam-induced mechanical behaviour. These results show that direct patterning of one-dimensional conducting nanowires in two-dimensional semiconducting materials with nanometre precision is possible using electron-beam-based techniques.

The Importance of Electron Correlation on Stacking Interaction of Adenine-Thymine Base-Pair Step in B-DNA: A Quantum Monte Carlo Study.

We report fixed-node diffusion Monte Carlo (DMC) calculations of stacking interaction energy between two adenine(A)-thymine(T) base pairs in B-DNA (AA:TT), for which reference data are available, obtained from a complete basis set estimate of CCSD(T) (coupled-cluster with singles, doubles, and perturbative triples). We consider four sets of nodal surfaces obtained from self-consistent field calculations and examine how the different nodal surfaces affect the DMC potential energy curves of the AA:TT molecule and the resulting stacking energies. We find that the DMC potential energy curves using the different nodes look similar to each other as a whole. We also benchmark the performance of various quantum chemistry methods, including Hartree-Fock (HF) theory, second-order Møller-Plesset perturbation theory (MP2), and density functional theory (DFT). The DMC and recently developed DFT results of the stacking energy reasonably agree with the reference, while the HF, MP2, and conventional DFT methods give unsatisfactory results.

Highly ordered cobalt-phthalocyanine chains on fractional atomic steps: one-dimensionality and electron hybridization.

Precisely controlled fabrication of low-dimensional molecular structures with tailored morphologies and electronic properties is at the heart of the nanotechnology research. Especially, the formation of one-dimensional (1D) structures has been strongly desired due to their expected high performance for information processing in electronic/magnetic devices. So far, however, they have been obtained by tough and slow methods such as manipulation of individual molecules, which are totally unsuited for mass production. Here we show that highly ordered cobalt-phthalocyanine chains can be self-assembled on a metal surface using fractional atomic steps as a template. We also demonstrate that the substrate surface electrons, which can be confined by cobalt-phthalocyanine molecules, can propagate along the step arrays and can hybridize with the molecular orbitals. These findings provide a significant step toward readily realization of 1D charge/spin transport, which can be mediated either directly by the molecules or by the surface electrons.