Comparative Analysis of Calcium and Hydroxyl Ion Release from Pulp Dressing Materials in Pulpotomized Premolars.

BACKGROUND The aim of this study was to evaluate the time-dependent release of calcium (Ca⁺⁺) and hydroxyl (OH⁻) ions from 3 different pulp dressing materials used to cap root canal orifices in pulpotomized premolars. MATERIAL AND METHODS Freshly extracted (n=40) premolars were subjected to standardized pulpotomy procedure and finally restored in 5 groups using resin-modified glass ionmmer liner (RMGI) and bonded resin composite directly against the pulp chamber's floor (Control, G2) and over 3 different orifices' capping materials - Dycal (G3), Endo Sequence root repair material (ESRRM, G4), and mineral trioxide aggregate (MTA) Angelus (G5). Another 10 sound premolars served as the Reference group (G1). The restored teeth were incubated at 37±1°C in sealed containers filled with deionized water to assess Ca⁺⁺ and OH⁻ ions release after 24 h and at 1, 4, and 8 weeks. Two-way ANOVA and Tukey's comparisons at alpha=0.05 were used to statistically analyze the collected data. RESULTS Two-way ANOVA revealed significant differences in Ca⁺⁺ ions between test groups at different testing time intervals (P<0.05). Despite the constant (Tukey's, P<0.05) pH levels (OH⁻ release), Group 5 specimens exhibited higher Ca⁺⁺ ion release in comparison to Groups 4 and 3 at different testing timepoints (Tukey's, P<0.05). CONCLUSIONS Although all the assessed pulp dressing materials had equivalent and stable pH levels, ESRRM and MTA-Angelus had the highest Ca⁺⁺ ion release at the assessment intervals.

A Systematic Review of Publications on Perceptions and Management of Chronic Medical Conditions Using Telemedicine Remote Consultations by Primary Healthcare Professionals April 2020 to December 2021 During the COVID-19 Pandemic.

Telemedicine technologies allow distribution of health-related services and information and can include electronic and telecommunication technologies, remote patient and clinician contact, referral and prescribing, patient education, and monitoring. This systematic review aimed to evaluate publications on the perceptions and management of chronic medical conditions using telehealth remote consultations by primary healthcare professionals between April 2020 and December 2021 during the COVID-19 pandemic. Electronic databases, including Cinhal, PubMed, Science Direct, and ProQuest were searched to extract qualitative studies relevant to the topic. Inclusion criteria were developed based on the Population, Exposure, and Outcomes scoping framework. The target population was healthcare professionals working in primary care settings. Included studies encompassed various types of telemedicine, such as synchronous telemedicine, video conferencing, telephone conversations, and smart devices. Eight studies were included. Synchronous telemedicine was highly effective in ensuring the continuity of care and treatment, providing patients with convenience, improved access to treatment, and earlier disease management. Video conferencing and telephone consultations were the most common methods used. Challenges included concerns about patient privacy, technology literacy, and acceptance. Telemedicine was commended for its ability to provide access to immediate expert medical advice and eliminate the need for long-distance travel, contributing to increased patient compliance. Synchronous telemedicine is a promising solution for managing chronic conditions during and after the COVID-19 pandemic, offering benefits to patients and healthcare professionals. To maximize its potential, concerns regarding patient privacy, confidentiality, and technology literacy need to be addressed. Proper legislation and regulations are required for long-term success of telemedicine, making it a valuable component of healthcare systems.

Clinical Performance of Glass Ionomer Cement in Load-Bearing Restorations: A Systematic Review.

Glass ionomer cement (GIC) is a self-adhesive dental restorative material composed of a polyacrylic acid liquid and fluoro-aluminosilicate glass powder. It is commonly used for cementation during dental restoration. This study aimed to systematically review the existing literature regarding the clinical performance of GIC in load-bearing dental restorations. A comprehensive literature search was conducted in EBSCO, PubMed, Embrace, and Cochrane databases. Only randomized controlled trials (RCTs) were included in the search, and a broad search technique was used, where inclusion and exclusion criteria were applied. After a thorough evaluation, 12 RCTs were extensively reviewed, and whether GIC is suitable for load-bearing restorations was determined. Significant variations in staining surface or margin, color match, translucency, esthetic anatomical form, retention, material fracture, marginal adaptation, surface luster, occlusal contour, wear, and approximal anatomical form indicated the unsuitability of GIC. By contrast, significance differences in patient view and periodontal response indicated that GIC is suitable. No significant differences in postoperative sensitivity, recurrence of caries, or tooth integrity were observed. Nevertheless, the results of the review demonstrated that the clinical performance of GIC is comparable to that of traditional restorative materials with regard to the parameters analyzed. GIC is a suitable restorative material for load-bearing restorations regarding surface margin, esthetic anatomical form, material retention and fracture, marginal adaptation, occlusal contour, wear, and approximal anatomical form. It reduces other parameters, such as postoperative sensitivity, recurrence of caries, and tooth integrity.

Students' performance in clinical class II composite restorations: a case study using analytic rubrics.

BACKGROUND: The analytical rubric serves as a permanent reference for guidelines on clinical performance for undergraduate dental students. This study aims to assess the rubric system used to evaluate clinical class II composite restorations performed by undergraduate dental students and to explore the impact of gender on overall student performance across two academic years. Additionally, we investigated the relationship between cumulative grade point averages (CGPAs) and students' clinical performance. METHODS: An analytical rubric for the assessment of clinical class II composite restoration in the academic years of 2022/2023 and 2023/2024 was used by two evaluators. These two evaluators were trained to use the rubric before doing the evaluations. The scores were based on a 4-point scale for the evaluation of five major parameters for pre-operative procedures (10 points), cavity preparation (20 points), restoration procedures (20 points), and time management (4 points). At the same time, chairside oral exam parameter was 15 points based on a 5-point scale. Descriptive statistics were calculated for the different analytical rubric parameters, and the independent t-test was used to compare the scores between the student groups and the evaluators. Other tests, such as the Kappa test and Pearson's correlation coefficient, were used to measure the association among CGPA, evaluators, and gender participants. RESULTS: The overall score out of 69 slightly increased for females/males (61.28/59.42) and (61.18/59.49) in the 2022/2023 and 2023/2024 academic years, respectively, but the differences were not statistically significant. In the 2022/2023 academic year, female students scored significantly higher than male students in pre-operative procedures, as evaluated by both evaluators (p = 0.001), and in time management, as assessed by both evaluators (p = 0.031). The Kappa test demonstrated a moderate to substantial level of agreement between the two evaluators in both academic years. Strong and significant correlations were noted between students' CGPA and some tested parameters (p = 0.000). CONCLUSION: The overall performance was very good and high among both genders, but it was marginally higher among females than among males. This study found some differences in performance between male and female students and variability in the evaluations by the two raters ranging from moderate to substantial agreement and similar performances for students with different CGPA.

A Comparative Analysis of Marginal Adaptation Values between Lithium Disilicate Glass Ceramics and Zirconia-Reinforced Lithium Silicate Endocrowns: A Systematic Review of In Vitro Studies.

This systematic review aimed to identify and analyze in vitro studies on the marginal adaptation values of computer-aided-design/computer-aided-manufacturing (CAD/CAM) and heat-pressed lithium disilicate glass ceramics and zirconia-reinforced lithium silicates and endocrown restorations. A full literature search was conducted in Web of Science, PubMed/Medline, EMBASE, Scopus, Cochrane Library, Google Scholar, and ProQuest electronic databases. The following keywords: endocrown [(marginal adaption) or (marginal fit) or internal fitting)], endocrown [(molar(s)) or (premolar(s) or (posterior teeth) or (maxillary arch) or (mandibular arch)] and ceramic materials as [(lithium disilicate glass ceramic CAD/CAM) or (zirconia) or (heat-press)] were used. Articles were manually searched utilizing their reference lists. Study selection was restricted or limited to the time of publication but not to the type of tested teeth or ceramic material, endocrown design, system of endocrown construction, abutment scanning, and system of the marginal adaption measurement. A total of 17 in vitro studies published between 2016 and 2023 were included in this systemic review. Less than half of the studies were published during 2023. Most studies used lithium disilicate glass ceramic and zirconia-reinforced lithium silicate all-ceramic materials by CAD/CAM or heat-press systems. Marginal adaptation, or marginal gap, was almost equal in the 2 materials, while it was slightly or marginally higher in the heat-press than in the CAD/CAM system. All-ceramic lithium disilicate glass ceramic and/or zirconia endocrowns fabricated for posterior teeth in both arches using CAD/CAM or heat-press had recorded marginal adaptation values within an acceptable range.

Advanced biomaterials for periodontal tissue regeneration.

The periodontium is a suitable target for regenerative intervention, since it does not functionally restore itself after disease. Importantly, the limited regeneration capacity of the periodontium could be improved with the development of novel biomaterials and therapeutic strategies. Of note, the regenerative potential of the periodontium depends not only on its tissue-specific architecture and function, but also on its ability to reconstruct distinct tissues and tissue interfaces, suggesting that the advancement of tissue engineering approaches can ultimately offer new perspectives to promote the organized reconstruction of soft and hard periodontal tissues. Here, we discuss material-based, biologically active cues, and the application of innovative biofabrication technologies to regenerate the multiple tissues that comprise the periodontium.

Evaluation of micro-CT in the assessment of microleakage under bulk fill composite restorations.

PURPOSE: To evaluate microleakage measurements using micro-CT in comparison to dye tracers in Class 2 bulk-fill composite restorations with two adhesive techniques. METHODS: 60 sound molars were prepared with Class 2 cavities having cervical margins in enamel (mesial) and in dentin (distal) and restored with Filtek Bulk Fill, using either a self-etch or total-etch technique. All teeth were thermo-cycled between 5°C and 55°C for 800 cycles and randomly exposed to three tracer dyes: 2% methylene blue, 0.5% basic fuchsin or 50% silver nitrate solutions. Teeth were sectioned mesial-distal and depth of tracer penetration was measured as a ratio of dye penetration from the cavosurface divided by total depth of the cervical floor. The silver nitrate subgroup was micro-CT scanned prior to sectioning, evaluated in 3D serial sections, and calculated volumetrically. RESULTS: Analysis of ratios for dye tracer penetration showed significantly lower values for methylene blue (0.120). Micro-CT values calculated in 3D as volume (mm³) were significantly greater in enamel for self-etch (0.060) compared to total-etch (0.020). Micro-CT volumetric analysis showed better discrimination with significantly greater leakage in enamel margins using the self-etch adhesive. CLINICAL SIGNIFICANCE: Based on this in vitro study of microleakage, micro-CT volumetric evaluation in serial digital sections improves discrimination and represents a more reliable estimate of true microleakage. In vitro study of microleakage is most useful in comparing adhesive products, but clinical application of the data is questionable.

Electrospun Azithromycin-Laden Gelatin Methacryloyl Fibers for Endodontic Infection Control.

This study was aimed at engineering photocrosslinkable azithromycin (AZ)-laden gelatin methacryloyl fibers via electrospinning to serve as a localized and biodegradable drug delivery system for endodontic infection control. AZ at three distinct amounts was mixed with solubilized gelatin methacryloyl and the photoinitiator to obtain the following fibers: GelMA+5%AZ, GelMA+10%AZ, and GelMA+15%AZ. Fiber morphology, diameter, AZ incorporation, mechanical properties, degradation profile, and antimicrobial action against Aggregatibacter actinomycetemcomitans and Actinomyces naeslundii were also studied. In vitro compatibility with human-derived dental pulp stem cells and inflammatory response in vivo using a subcutaneous rat model were also determined. A bead-free fibrous microstructure with interconnected pores was observed for all groups. GelMA and GelMA+10%AZ had the highest fiber diameter means. The tensile strength of the GelMA-based fibers was reduced upon AZ addition. A similar pattern was observed for the degradation profile in vitro. GelMA+15%AZ fibers led to the highest bacterial inhibition. The presence of AZ, regardless of the concentration, did not pose significant toxicity. In vivo findings indicated higher blood vessel formation, mild inflammation, and mature and thick well-oriented collagen fibers interweaving with the engineered fibers. Altogether, AZ-laden photocrosslinkable GelMA fibers had adequate mechanical and degradation properties, with 15%AZ displaying significant antimicrobial activity without compromising biocompatibility.

Hybrid Antimicrobial Hydrogel as Injectable Therapeutics for Oral Infection Ablation.

Oral bacterial infection represents the leading cause of the gradual destruction of tooth and periodontal structures anchoring the teeth. Lately, injectable hydrogels have gained increased attention as a promising minimally invasive platform for localized delivery of personalized therapeutics. Here, an injectable and photocrosslinkable gelatin methacryloyl (GelMA) hydrogel is successfully engineered with ciprofloxacin (CIP)-eluting short nanofibers for oral infection ablation. For this purpose, CIP or its ß-cyclodextrin (ß-CD)-inclusion complex (CIP/ß-CD-IC) has been incorporated into polymeric electrospun fibers, which were subsequently cut into short nanofibers, and then embedded in GelMA to obtain an injectable hybrid antimicrobial hydrogel. Thanks to the solubility enhancement of CIP by ß-CD-IC and the tunable degradation profile of GelMA, the hydrogels promote localized, sustained, and yet effective cell-friendly antibiotic doses, as measured by a series of bacterial assays that demonstrated efficacy in attenuating the growth of Gram-positive Enterococcus faecalis. Altogether, we foresee significant potential in translating this innovative hybrid hydrogel as an injectable platform technology that may have broad applications in oral infection ablation, such as periodontal disease and pulpal pathology.

Impact of common social habits on optical properties of lithium disilicate glass ceramic crowns: An in vitro study.

Statement of the problem: Patient stratifications considered the stability of color and treatment longevity are key success of restoration. Daily consumption of colored beverages, such as coffee, tea, and soft drinks, as well as the use of globally consumed materials, such as smokeless tobacco (ST), snuff, Khat, and Yerba mate, can change the color of restorative materials, such as lithium disilicate glass ceramics (LDGC). These changes can ultimately lead to treatment failure. Purpose: This in vitro study aimed to evaluate color changes, translucency, and opalescence of full anatomical LDGC crowns exposed to commonly used and potentially colorant solutions. Materials and methods: Ninety LDGC specimens/crowns were prepared and divided into nine groups according to immersion solution (control, Saudi Coffee, Cola, Khat, Yerba mate, Nescafe, ST Snuff, and Mixed Fruit Juice). The specimens were immersed in colorant solutions for 15 days with alternating twice daily at 37 °C. Color parameters were measured with a spectrophotometer and calculated using two backgrounds (black and white). Data were subjected to ANOVA followed by the Student t-test and Bonferroni test at a significant difference level (α = 0.05). Results: The greatest color change (ΔE*) among groups after immersion was observed in Yerba mate (7.6 ± 1.6). The mean difference of before and after staining within Yerba mate group was 3.14 ± 1.6 (p = 0.001). Translucency mean values of groups after immersion into staining media were ranging between 7.6 ± 1.2 and 9.1 ± 2, showing a slight decrease compared with pre-staining values but was not significantly different. Immersion in Mixed Fruit Juice significantly reduced opalescence (7.4 ± 1.9) compared to (8.8 ± 1.7) before staining. Conclusion: The findings confirm that appropriate user guidance helps to preserve both translucency and opalescence as well as prevent color changes. This can improve patient compliance and promote treatment longevity.

Amino Acid-Based Poly(ester urea) Biodegradable Membrane for Guided Bone Regeneration.

Barrier membranes (BM) for guided bone regeneration (GBR) aim to support the osteogenic healing process of a defined bony defect by excluding epithelial (gingival) ingrowth and enabling osteoprogenitor and stem cells to proliferate and differentiate into bone tissue. Currently, the most widely used membranes for these approaches are collagen-derived, and there is a discrepancy in defining the optimal collagen membrane in terms of biocompatibility, strength, and degradation rates. Motivated by these clinical observations, we designed a collagen-free membrane based on l-valine-co-l-phenylalanine-poly(ester urea) (PEU) copolymer via electrospinning. Degradation and mechanical properties of these membranes were performed on as-spun and water-aged samples. Alveolar-bone-derived stem cells (AvBMSCs) were seeded on the PEU BM to assess their cell compatibility and osteogenic characteristics, including cell viability, attachment/spreading, proliferation, and mineralized tissue-associated gene expression. In vivo, PEU BMs were subcutaneously implanted in rats to evaluate their potential to cause inflammatory responses and facilitate angiogenesis. Finally, critical-size calvarial defects and a periodontal model were used to assess the regenerative capacity of the electrospun PEU BM compared to clinically available Cytoflex synthetic membranes. PEU BM demonstrated equal biocompatibility to Cytoflex with superior mechanical performance in strength and elasticity. Additionally, after 14 days, PEU BM exhibited a higher expression of BGLAP/osteocalcin and superior in vivo performance-less inflammation and increased CD31 and VWF expression over time. When placed in critical-sized defects in the calvaria of rats, the PEU BM led to robust bone formation with high expression of osteogenesis and angiogenesis markers. Moreover, our membrane enhanced alveolar bone and cementum regeneration in an established periodontal model after 8 weeks. We demonstrate that the PEU BM exhibits favorable clinical properties, including mechanical stability, cytocompatibility, and facilitated bone formation in vitro and in vivo. This highlights its suitability for GBR in periodontal and craniofacial bone defects.

Evaluation of Radiant Power of the Light Curing Units Used in Clinics at Governmental and Privates Dental Faculties.

Background:  To evaluate the radiant power of the light cure units (LCUs) in relation to their type, radiant exitance, number of years in clinical use, and condition of LCUs tips in governmental and public clinics in Dental Faculties in Sana'a City. Materials and Methods: LCUs were collected from different colleges at Sanaa City, Yemen, then LCU data as type, clinical age (<1 year, between 1-5 and ˃ 5-years), tip condition was visually inspected for damage and adhering debris, and the radiant exitance values of the tested LCUs. Radiant exitance values were subcategorized into three groups: <400, 400-850, and >850 mW/cm², labeled as inadequate, marginal, and adequate radiant exitances, respectively. A Woodpecker radiometer was used with a mode lasting of 20 seconds was used with each LCU. Descriptive statistics of the different parameters were evaluated with SPSS version 25. One-way ANOVA and Mann-Whitney tests were performed to determine the mean difference between the groups with a significance value of ˂ 0.05 was considered. Results: Two hundred twenty-three LCUs were surveyed, and the majority were Light-emitting diode (LED). Forty-nine (21.9%), 117 (52.4%), 57 (25.6%) recorded lesser than, 400-850, and more than 850 mW/cm², respectively. Radiant exitances of < year-old units were found to be higher than those of units used for ˃ 5 years with significant differences (p=0.001). The ANOVA test showed significant differences between the radiant exitance with clinical age and LCU tip conditions and a strong correlation p ˃ 0.050. Conclusion: LED curing lights were the most used in the tested Dental Faculties. More than half of the used LCU offered sufficient radiant exitance. Clinical age, the presence or absence of composite buildups, and damage to curing tips showed significantly affect radiant exitance values.

Color Stability, Gloss Retention, and Surface Roughness of 3D-Printed versus Indirect Prefabricated Veneers.

The long-term color stability and surface properties of anterior laminate veneers are among the crucial factors affecting the clinical longevity of aesthetic restorations. Novel 3D-printed materials are being introduced as definitive restorative treatment. In light of the existing variety of indirect yet minimally invasive composite resin veneers, research on their surface properties is warranted. This in vitro study evaluated the effect of artificial aging by immersion in different staining solutions on the color changes, gloss, and surface roughness (Ra) of 3D-printed veneers compared to the prefabricated resin composite veneer systems (PRCVs) manufactured by Componeer and Edelweiss. Moreover, this study compared the effects of two methods for stain removal: repolishing with Sof-Lex disks and in-office bleaching with 40% hydrogen peroxide. The veneers (n = 24) were randomly divided according to the immersion solutions used, i.e., tea and coffee. Colorimetric measurements, surface roughness, and surface gloss were determined before and after staining and surface treatment with either in-office bleaching or surface polishing. The data were statistically analyzed using two-way ANOVA followed by the Tukey's post hoc test (α = 0.05). Artificial aging with immersion in staining solutions led to significant color changes, increased surface roughness, and gloss reduction in all materials (p < 0.05). The 3D-printed veneers showed higher ΔE values (coffee = 10.112 ± 0.141) and (tea = 10.689 ± 0.771) compared to baseline after 7 days of aging. The 3D-printed veneers had a statistically significant surface roughness Ra (0.574 µm ± 0.073). The gloss was >70% in all groups at baseline; these values dropped in all groups after 7 days of artificial aging. After the stain-removing procedures, the ΔE values decreased in all tested veneers. That being said, they failed to return to the baseline values, and both stain-removing methods were found to have an adverse effect on surface roughness and gloss retention in all tested veneers.

Unveiling the potential of melt electrowriting in regenerative dental medicine.

For nearly three decades, tissue engineering strategies have been leveraged to devise effective therapeutics for dental, oral, and craniofacial (DOC) regenerative medicine and treat permanent deformities caused by many debilitating health conditions. In this regard, additive manufacturing (AM) allows the fabrication of personalized scaffolds that have the potential to recapitulate native tissue morphology and biomechanics through the utilization of several 3D printing techniques. Among these, melt electrowriting (MEW) is a versatile direct electrowriting process that permits the development of well-organized fibrous constructs with fiber resolutions ranging from micron to nanoscale. Indeed, MEW offers great prospects for the fabrication of scaffolds mimicking tissue specificity, healthy and pathophysiological microenvironments, personalized multi-scale transitions, and functional interfaces for tissue regeneration in medicine and dentistry. Excitingly, recent work has demonstrated the potential of converging MEW with other AM technologies and/or cell-laden scaffold fabrication (bioprinting) as a favorable route to overcome some of the limitations of MEW for DOC tissue regeneration. In particular, such convergency fabrication strategy has opened great promise in terms of supporting multi-tissue compartmentalization and predetermined cell commitment. In this review, we offer a critical appraisal on the latest advances in MEW and its convergence with other biofabrication technologies for DOC tissue regeneration. We first present the engineering principles of MEW and the most relevant design aspects for transition from flat to more anatomically relevant 3D structures while printing highly-ordered constructs. Secondly, we provide a thorough assessment of contemporary achievements using MEW scaffolds to study and guide soft and hard tissue regeneration, and draw a parallel on how to extrapolate proven concepts for applications in DOC tissue regeneration. Finally, we offer a combined engineering/clinical perspective on the fabrication of hierarchically organized MEW scaffold architectures and the future translational potential of site-specific, single-step scaffold fabrication to address tissue and tissue interfaces in dental, oral, and craniofacial regenerative medicine. STATEMENT OF SIGNIFICANCE: Melt electrowriting (MEW) techniques can further replicate the complexity of native tissues and could be the foundation for novel personalized (defect-specific) and tissue-specific clinical approaches in regenerative dental medicine. This work presents a unique perspective on how MEW has been translated towards the application of highly-ordered personalized multi-scale and functional interfaces for tissue regeneration, targeting the transition from flat to anatomically-relevant three-dimensional structures. Furthermore, we address the value of convergence of biofabrication technologies to overcome the traditional manufacturing limitations provided by multi-tissue complexity. Taken together, this work offers abundant engineering and clinical perspectives on the fabrication of hierarchically MEW architectures aiming towards site-specific implants to address complex tissue damage in regenerative dental medicine.

Tissue-specific melt electrowritten polymeric scaffolds for coordinated regeneration of soft and hard periodontal tissues.

Periodontitis is a chronic inflammatory condition that often causes serious damage to tooth-supporting tissues. The limited successful outcomes of clinically available approaches underscore the need for therapeutics that cannot only provide structural guidance to cells but can also modulate the local immune response. Here, three-dimensional melt electrowritten (i.e., poly(ε-caprolactone)) scaffolds with tissue-specific attributes were engineered to guide differentiation of human-derived periodontal ligament stem cells (hPDLSCs) and mediate macrophage polarization. The investigated tissue-specific scaffold attributes comprised fiber morphology (aligned vs. random) and highly-ordered architectures with distinct strand spacings (small 250 µm and large 500 µm). Macrophages exhibited an elongated morphology in aligned and highly-ordered scaffolds, while maintaining their round-shape on randomly-oriented fibrous scaffolds. Expressions of periostin and IL-10 were more pronounced on the aligned and highly-ordered scaffolds. While hPDLSCs on the scaffolds with 500 µm strand spacing show higher expression of osteogenic marker (Runx2) over 21 days, cells on randomly-oriented fibrous scaffolds showed upregulation of M1 markers. In an orthotopic mandibular fenestration defect model, findings revealed that the tissue-specific scaffolds (i.e., aligned fibers for periodontal ligament and highly-ordered 500 µm strand spacing fluorinated calcium phosphate [F/CaP]-coated fibers for bone) could enhance the mimicking of regeneration of natural periodontal tissues.

Nanoscale ß-TCP-Laden GelMA/PCL Composite Membrane for Guided Bone Regeneration.

Major advances in the field of periodontal tissue engineering have favored the fabrication of biodegradable membranes with tunable physical and biological properties for guided bone regeneration (GBR). Herein, we engineered innovative nanoscale beta-tricalcium phosphate (ß-TCP)-laden gelatin methacryloyl/polycaprolactone (GelMA/PCL-TCP) photocrosslinkable composite fibrous membranes via electrospinning. Chemo-morphological findings showed that the composite microfibers had a uniform porous network and ß-TCP particles successfully integrated within the fibers. Compared with pure PCL and GelMA/PCL, GelMA/PCL-TCP membranes led to increased cell attachment, proliferation, mineralization, and osteogenic gene expression in alveolar bone-derived mesenchymal stem cells (aBMSCs). Moreover, our GelMA/PCL-TCP membrane was able to promote robust bone regeneration in rat calvarial critical-size defects, showing remarkable osteogenesis compared to PCL and GelMA/PCL groups. Altogether, the GelMA/PCL-TCP composite fibrous membrane promoted osteogenic differentiation of aBMSCs in vitro and pronounced bone formation in vivo. Our data confirmed that the electrospun GelMA/PCL-TCP composite has a strong potential as a promising membrane for guided bone regeneration.

Composite Graded Melt Electrowritten Scaffolds for Regeneration of the Periodontal Ligament-to-Bone Interface.

Periodontitis is a ubiquitous chronic inflammatory, bacteria-triggered oral disease affecting the adult population. If left untreated, periodontitis can lead to severe tissue destruction, eventually resulting in tooth loss. Despite previous efforts in clinically managing the disease, therapeutic strategies are still lacking. Herein, melt electrowriting (MEW) is utilized to develop a compositionally and structurally tailored graded scaffold for regeneration of the periodontal ligament-to-bone interface. The composite scaffolds, consisting of fibers of polycaprolactone (PCL) and fibers of PCL-containing magnesium phosphate (MgP) were fabricated using MEW. To maximize the bond between bone (MgP) and ligament (PCL) regions, we evaluated two different fiber architectures in the interface area. These were a crosshatch pattern at a 0/90° angle and a random pattern. MgP fibrous scaffolds were able to promote in vitro bone formation even in culture media devoid of osteogenic supplements. Mechanical properties after MgP incorporation resulted in an increase of the elastic modulus and yield stress of the scaffolds, and fiber orientation in the interfacial zone affected the interfacial toughness. Composite graded MEW scaffolds enhanced bone fill when they were implanted in an in vivo periodontal fenestration defect model in rats. The presence of an interfacial zone allows coordinated regeneration of multitissues, as indicated by higher expression of bone, ligament, and cementoblastic markers compared to empty defects. Collectively, MEW-fabricated scaffolds having compositionally and structurally tailored zones exhibit a good mimicry of the periodontal complex, with excellent regenerative capacity and great potential as a defect-specific treatment strategy.

Self-assembling peptide-laden electrospun scaffolds for guided mineralized tissue regeneration.

OBJECTIVES: Electrospun scaffolds are a versatile biomaterial platform to mimic fibrillar structure of native tissues extracellular matrix, and facilitate the incorporation of biomolecules for regenerative therapies. Self-assembling peptide P11-4 has emerged as a promising strategy to induce mineralization; however, P11-4 application has been mostly addressed for early caries lesions repair on dental enamel. Here, to investigate P11-4's efficacy on bone regeneration, polymeric electrospun scaffolds were developed, and then distinct concentrations of P11-4 were physically adsorbed on the scaffolds. METHODS: P11-4-laden and pristine (P11-4-free) electrospun scaffolds were immersed in simulated body fluid and mineral precipitation identified by SEM. Functional groups and crystalline phases were analyzed by FTIR and XRD, respectively. Cytocompatibility, mineralization, and gene expression assays were conducted using stem cells from human exfoliated deciduous teeth. To investigate P11-4-laden scaffolds potential to induce in vivo mineralization, an established rat calvaria critical-size defect model was used. RESULTS: We successfully synthesized nanofibrous (∼ 500 nm fiber diameter) scaffolds and observed that functionalization with P11-4 did not affect the fibers' diameter. SEM images indicated mineral precipitation, while FTIR and XRD confirmed apatite-like formation and crystallization for P11-4-laden scaffolds. In addition, P11-4-laden scaffolds were cytocompatible, highly stimulated cell-mediated mineral deposition, and upregulated the expression of mineralization-related genes compared to pristine scaffolds. P11-4-laden scaffolds led to enhanced in vivo bone regeneration after 8 weeks compared to pristine PCL. SIGNIFICANCE: Electrospun scaffolds functionalized with P11-4 are a promising strategy for inducing mineralized tissues regeneration in the craniomaxillofacial complex.

Innovations in Craniofacial Bone and Periodontal Tissue Engineering - From Electrospinning to Converged Biofabrication.

From a materials perspective, the pillars for the development of clinically translatable scaffold-based strategies for craniomaxillofacial (CMF) bone and periodontal regeneration have included electrospinning and 3D printing (biofabrication) technologies. Here, we offer a detailed analysis of the latest innovations in 3D (bio)printing strategies for CMF bone and periodontal regeneration and provide future directions envisioning the development of advanced 3D architectures for successful clinical translation. First, the principles of electrospinning applied to the generation of biodegradable scaffolds are discussed. Next, we present on extrusion-based 3D printing technologies with a focus on creating scaffolds with improved regenerative capacity. In addition, we offer a critical appraisal on 3D (bio)printing and multitechnology convergence to enable the reconstruction of CMF bones and periodontal tissues. As a future outlook, we highlight future directions associated with the utilization of complementary biomaterials and (bio)fabrication technologies for effective translation of personalized and functional scaffolds into the clinics.

A Highly Ordered, Nanostructured Fluorinated CaP-Coated Melt Electrowritten Scaffold for Periodontal Tissue Regeneration.

Periodontitis is a chronic inflammatory, bacteria-triggered disorder affecting nearly half of American adults. Although some level of tissue regeneration is realized, its low success in complex cases demands superior strategies to amplify regenerative capacity. Herein, highly ordered scaffolds are engineered via Melt ElectroWriting (MEW), and the effects of strand spacing, as well as the presence of a nanostructured fluorinated calcium phosphate (F/CaP) coating on the adhesion/proliferation, and osteogenic differentiation of human-derived periodontal ligament stem cells, are investigated. Upon initial cell-scaffold interaction screening aimed at defining the most suitable design, MEW poly(ε-caprolactone) scaffolds with 500 µm strand spacing are chosen. Following an alkali treatment, scaffolds are immersed in a pre-established solution to allow for coating formation. The presence of a nanostructured F/CaP coating leads to a marked upregulation of osteogenic genes and attenuated bacterial growth. In vivo findings confirm that the F/CaP-coated scaffolds are biocompatible and lead to periodontal regeneration when implanted in a rat mandibular periodontal fenestration defect model. In aggregate, it is considered that this work can contribute to the development of personalized scaffolds capable of enabling tissue-specific differentiation of progenitor cells, and thus guide simultaneous and coordinated regeneration of soft and hard periodontal tissues, while providing antimicrobial protection.