Associations between exposure to pesticides mixture and semen quality among the non-occupationally exposed males: Four statistical models.

Most epidemiological studies on the associations between pesticides exposure and semen quality have been based on a single pesticide, with inconsistent major results. In contrast, there was limited human evidence on the potential effect of pesticides mixture on semen quality. Our study aimed to investigate the relationship of pesticide profiles with semen quality parameters among 299 non-occupationally exposed males aged 25-50 without any clinical abnormalities. Serum concentrations of 21 pesticides were quantified by gas chromatography-tandem mass spectrometry (GC-MS/MS). Semen quality parameters were abstracted from medical records. Generalized linear regression models (GLMs) and three mixture approaches, including weighted quantile sum regression (WQS), elastic net regression (ENR) and Bayesian kernel machine regression (BKMR), were applied to explore the single and mixed effects of pesticide exposure on semen quality. In GLMs, as the serum levels of Bendiocarb, ß-BHC, Clomazone, Dicrotophos, Dimethenamid, Paclobutrazole, Pentachloroaniline and Pyrimethanil increased, the straight-line velocity (VSL), linearity (LIN) and straightness (STR) decreased. This negative association also occurred between the concentration of ß-BHC, Pentachloroaniline, Pyrimethanil and progressive motility, total motility. In the WQS models, pesticides mixture was negatively associated with total motility and several sperm motility parameters (ß: -3.07∼-1.02 per decile, FDR-P<0.05). After screening the important pesticides derived from the mixture by ENR model, the BKMR models showed that the decreased qualities for VSL, LIN, and STR were also observed when pesticide mixtures were at ≥ 70th percentiles. Clomazone, Dimethenamid, and Pyrimethanil (Posterior inclusion probability, PIP: 0.2850-0.8900) were identified as relatively important contributors. The study provides evidence that exposure to single or mixed pesticide was associated with impaired semen quality.

Associations of cord serum polybrominated diphenyl ether (PBDE) mixture with birth outcomes and mediating role of thyroid function: Evidence from the Sheyang Mini Birth Cohort Study.

BACKGROUND: Polybrominated diphenyl ethers (PBDEs), a series of worldwide applied flame retardants, may influence fetal growth and interfere with thyroid function. The study intended to explore the relationship between in-utero exposure to PBDE mixture and newborn anthropometric indexes and to further examine the potential mediating role of thyroid function. METHODS: Demographics and laboratory measures of 924 mother-infant pairs were obtained from the database of the Sheyang Mini Birth Cohort Study. We applied gas chromatography-mass spectrometry (GC-MS) and electrochemiluminescence immunoassay to measure nine PBDE congeners and seven thyroid function parameters in umbilical cord serum samples, respectively. We fitted generalized linear models and Bayesian kernel machine regression (BKMR) to evaluate associations of lipid-adjusted cord serum PBDEs, as individuals and as a mixture, with newborn anthropometric and cord serum thyroid function parameters. We applied causal mediation analysis to test our hypothesis that thyroid function parameters act as a mediator between PBDEs and birth outcomes. RESULTS: The molarity of cord serum ∑9PBDE had a median value of 31.23 nmol/g lipid (IQR 19.14 nmol/g lipid, 54.77 nmol/g lipid). BDE-209 was the most dominant congener. Birth length was positively associated with both single exposure to BDE-28 and cumulative exposure to PBDEs. Correspondingly, ponderal index (PI) was negatively associated with BDE-28 and the total effects of PBDE mixture. Free triiodothyronine had a negative trend with BDE-209 and PBDE mixture. In the sex-stratified analysis, BDE-153 concentrations were positively correlated with PI among males (ß = 0.03; 95%CI: 0.01, 0.05; P = 0.01) but not among females. Cord serum thyrotropin mediated 14.92% of the estimated effect of BDE-153 on PI. CONCLUSIONS: In-utero mixture exposure to PBDEs was associated with birth outcomes and thyroid function. Thyroid function might act as a mediator in the process in which PBDEs impact the growth of the fetus.

Associations of perfluoroalkyl substances with adipocytokines in umbilical cord serum: A mixtures approach.

BACKGROUND: Per- and polyfluoroalkyl substances (PFAS), a kind of emerging environmental endocrine disruptors, may interfere with the secretion of adipokines and affect fetal metabolic function and intrauterine development. However, the epidemiological evidence is limited and inconsistent. We examined the associations of single and multiple PFAS exposures in utero with adipocytokine concentrations in umbilical cord serum. METHODS: This study included 1111 mother-infant pairs from Sheyang Mini Birth Cohort Study (SMBCS), and quantified 12 PFAS and two adipokine in umbilical cord serum. Generalized linear models (GLMs) and Bayesian Kernel Machine Regression (BKMR) models were applied to estimate the associations of single- and mixed- PFAS exposure with adipokines, respectively. Furthermore, sex-stratification was done in each model to assess the sexually dimorphic effects of PFAS. RESULTS: 10 PFAS were detected with median concentrations (µg/L) ranging from 0.04 to 3.97, (except 2.7% for PFOSA and 1.7% for PFDS, which were excluded). In GLMs, for each doubling increase in PFBS, PFHpA, PFHxS, PFHpS, PFUnDA and PFDoDA, leptin decreased between 14.04% for PFBS and 22.69% for PFHpS (P < 0.05). PFAS, except for PFNA, were positively associated with adiponectin, and for each doubling of PFAS, adiponectin increased between 3.27% for PFBS and 12.28% for PFHxS (P < 0.05). In addition, infant gender modified the associations of PFAS with adipokines, especially the associations of PFBS, PFOA and PFHxS with adiponectin. Similarly, significant associations of PFAS mixtures with leptin and adiponectin were observed in the BKMR models. PFDA, PFOS, PFNA and PFHpS were identified as important contributors. In the sex-stratified analysis of BKMR models, the associations between PFAS mixtures and adipokines were more pronounced in males. CONCLUSIONS: PFAS levels were significantly associated with adipokines in cord serum, suggesting that intrauterine mixture of PFAS exposure may be related to decreased fetal leptin level but increased fetal adiponectin level and the associations may be sex-specific.

Mediating effect of endocrine hormones on association between per- and polyfluoroalkyl substances exposure and birth size: Findings from sheyang mini birth cohort study.

BACKGROUND: Prenatal exposure to per- and polyfluoroalkyl substances (PFAS) has been reported to affect fetus growth, but current results were inconsistent and their mechanism remained unclear. OBJECTIVES: We aimed to evaluate the associations of prenatal exposure to single and/or multiple PFAS with birth size and to elucidate whether thyroid hormones and reproductive hormones mediate these associations. METHODS: A total of 1087 mother-newborn pairs from Sheyang Mini Birth Cohort Study were included in the present cross-sectional analysis. 12 PFAS, 5 thyroid hormones and 2 reproductive hormones were measured in cord serum. Multiple linear regression models and Bayesian kernel machine regression (BKMR) models were used to examine the associations of PFAS with either birth size or endocrine hormones. One-at-a-time pairwise mediating effect analysis was applied to estimate the mediating effect of single hormone in the association between individual chemical and birth size. High-dimensional mediation approach including elastic net regularization and Bayesian shrinkage estimation were further performed to reduce exposure dimension and figure out the global mediation effects of joint endocrine hormones. RESULTS: Perfluorononanoic acid (PFNA) exposure was positively associated to weight for length z score [WLZ, per log10-unit: regression coefficient (ß) = 0.26, 95% confidence intervals (CI): 0.04, 0.47] and ponderal index (PI, ß = 0.56, 95% CI: 0.09, 1.02), and PFAS mixture results fit by BKMR model showed consistent consequences. High-dimensional mediating analyses revealed that thyroid stimulating hormone (TSH) explained 6.7% of the positive association between PFAS mixtures exposure and PI [Total effect (TE) = 1.499 (0.565, 2.405); Indirect effect (IE) = 0.105 (0.015, 0.231)]. Besides, 7.3% of the PI variance was indirectly explained by 7 endocrine hormones jointly [TE = 0.810 (0.802, 0.819); IE = 0.040 (0.038, 0.041)]. CONCLUSIONS: Prenatal PFAS mixtures exposure, especially PFNA, was positively associated to birth size. Such associations were partly mediated by cord serum TSH.

Sex-specific associations of maternal and childhood urinary arsenic levels with emotional problems among 6-year-age children: Evidence from a longitudinal cohort study in China.

BACKGROUND: Arsenic exposure has been linked to neurobehavior development disorders among children in cross-sectional studies, but there is little information on the effects of prenatal and childhood arsenic exposure on childhood behavior problem, especially emotional problems. OBJECTIVE: To explore the relationship between prenatal and childhood arsenic exposure and behavior problems among six-year-old children. METHODS: 389 mother-child pairs from a longitudinal birth cohort were enrolled in the study. The concentrations of arsenic in maternal and 6-year-old children's urine were measured using inductively coupled plasma mass spectrometry (ICP-MS). Neurobehavioral development in 6-year-old children was assessed by Child Behavior Checklist (CBCL). Generalized linear regression models were used to relate arsenic exposure to the score of different domains in CBCL. RESULTS: The median concentrations of maternal and 6-year-old children's urinary arsenic were 22.22 and 33.86 µg/L, respectively. After adjusting for potential covariates, natural logarithm transformed concurrent urinary arsenic levels were significantly associated with scores of anxious and depressed problems in 6-year-old girls (ß = 0.71, 95% CI: 0.12-1.31, p = 0.018). Furthermore, in terms of the trajectory of arsenic exposure, compared with the "consistently low" group, the "low to high" group (ß = 2.73, 95% CI: -3.99 to 9.45, p = 0.425) had a greater effect on total score of CBCL than "high to low" group (ß = -0.93, 95% CI: -7.22 to 5.36, p = 0.771) in girls, although insignificant. CONCLUSIONS: Our results suggested that concurrent arsenic exposure might have an adverse effect of emotional status in girls. Further studies are needed to verify the findings and explore the mechanisms of the sex-specific association.

Multiple mediation effects on association between prenatal triclosan exposure and birth outcomes.

BACKGROUND: Triclosan is a broad-spectrum antimicrobial, and was thought to affect intrauterine development, but the mechanism remains unclear. OBJECTIVE: To explore the association between prenatal triclosan exposure and birth outcomes. METHODS: Based on 726 mother-child pairs from the Sheyang Mini Birth Cohort Study (SMBCS), we used the available (published) data of triclosan in maternal urines, the hormones including thyroid-related hormones, gonadal hormones in cord blood, and adipokines, trimethylamine-N-oxide (TMAO) and its precursors in cord blood to explore possible health effects of triclosan on birth outcomes through assessing different hormones and parameters, using Bayesian mediation analysis. RESULTS: Maternal triclosan exposure was associated with ponderal index (ß = 0.317) and head circumference (ß = -0.172) in generalized linear models. In Bayesian mediation analysis of PI model, estradiol (ß = 0.806) and trimethylamine (TMA, ß = 0.164) showed positive mediation effects, while total thyroxine (TT4, ß = -0.302), leptin (ß = -2.023) and TMAO (ß = -0.110) showed negative mediation effects. As for model of head circumference, positive mediation effects were observed in free thyroxine (FT4, ß = 0.493), TMA (ß = 0.178), and TMAO (ß = 0.683), negative mediation effects were observed in TT4 (ß = -0.231), testosterone (ß = -0.331), estradiol (ß = -1.153), leptin (ß = -2.361), choline (ß = -0.169), betaine (ß = -0.104), acetyl-L-carnitine (ß = -0.773). CONCLUSION: The results indicated triclosan can affect intrauterine growth by interfering thyroid-related hormones, gonadal hormones, adipokines, TMAO and its precursors.

Urinary para-nitrophenol levels of pregnant women and cognitive and motor function of their children aged 2 years: Evidence from the SMBCS (China).

BACKGROUND: Urinary para-nitrophenol (PNP), an exposure biomarker of ethyl parathion (EP) and methyl parathion (MP) pesticides, was still pervasively detected in the general population even after global restriction for years. And the concern whether there is an association of PNP level with child development of the nervous system is increasing. The current study aimed to evaluate the maternal urinary PNP concentrations during late pregnancy and the associations of PNP levels with cognitive and motor function of their children at the age of 2 years. METHODS: 323 mother-child pairs from the Sheyang Mini Birth Cohort Study were included in the current study. Gas chromatography-tandem mass spectrometry was used to measure concentrations of PNP, the specific metabolite of EP and MP, in maternal urine samples during pregnancy. Developmental quotients (DQs) scores measured with Gesell Developmental Scales were employed to evaluate cognitive and motor function of children aged 2 years. Generalized linear models were performed to analyze the associations of PNP concentrations in pregnant women's urine samples with cognitive and motor function of their children. RESULTS: Maternal PNP was detected in all urine samples with a median of 4.11 µg/L and a range from 0.57 µg/L to 109.13 µg/L, respectively. Maternal urinary PNP concentrations showed a negative trend with DQ of motor area [regression coefficient (ß) = - 1.35; 95 % confidence interval (95 %CI): - 2.37, - 0.33; P < 0.01], and the children whose mothers were in the fourth quartile exposure group performed significantly worse compared to the reference group (ß = - 1.11; 95 %CI: - 1.80, - 0.42; P < 0.01). As for average DQ score, children with their mothers' urinary PNP concentrations in the third quartile group had higher scores than those in the first quartile group (ß = 0.39; 95 %CI: 0.03, 0.75; P = 0.04). In sex-stratified analyses, a negative trend between maternal urinary PNP concentrations and DQ scores in motor area of children was only observed in boys (ß = - 1.62; 95 %CI: - 2.80, - 0.43; P < 0.01). Boys in the third quartile group had higher DQ average scores than those in the lowest quartile as reference (ß = 0.53; 95 %CI: 0.02, 1.04; P = 0.04). CONCLUSIONS: The mothers from SMBCS may be widely exposed to EP and/or MP, which were associated with the cognitive and motor function of their children aged 2 years in a sex-specific manner. Our results might provide epidemiology evidence on the potential effects of prenatal exposure to EP and/or MP on children's cognitive and motor function.

Recent Progress of Switching Power Management for Triboelectric Nanogenerators.

Based on the coupling effect of contact electrification and electrostatic induction, the triboelectric nanogenerator (TENG) as an emerging energy technology can effectively harvest mechanical energy from the ambient environment. However, due to its inherent property of large impedance, the TENG shows high voltage, low current and limited output power, which cannot satisfy the stable power supply requirements of conventional electronics. As the interface unit between the TENG and load devices, the power management circuit can perform significant functions of voltage and impedance conversion for efficient energy supply and storage. Here, a review of the recent progress of switching power management for TENGs is introduced. Firstly, the fundamentals of the TENG are briefly introduced. Secondly, according to the switch types, the existing power management methods are summarized and divided into four categories: travel switch, voltage trigger switch, transistor switch of discrete components and integrated circuit switch. The switch structure and power management principle of each type are reviewed in detail. Finally, the advantages and drawbacks of various switching power management circuits for TENGs are systematically summarized, and the challenges and development of further research are prospected.

NMD mechanism and the functions of Upf proteins in plant.

Nonsense-mediated decay (NMD) mechanism, also called mRNA surveillance, is a universal mRNA degradation pathway in eukaryotes. Hundreds of genes can be regulated by NMD whether in single-celled or higher organisms. There have been many studies on NMD and NMD factors (Upf proteins) with regard to their crucial roles in mRNA decay, especially in mammals and yeast. However, research focusing on NMD in plant is still lacking compared to the research that has been dedicated to NMD in mammals and yeast. Even so, recent study has shown that NMD factors in Arabidopsis can provide resistance against biotic and abiotic stresses. This discovery and its associated developments have given plant NMD mechanism a new outlook and since then, more and more research has focused on this area. In this review, we focused mainly on the distinctive NMD micromechanism and functions of Upf proteins in plant with references to the role of mRNA surveillance in mammals and yeast. We also highlighted recent insights into the roles of premature termination codon location, trans-elements and functions of other NMD factors to emphasize the particularity of plant NMD. Furthermore, we also discussed conventional approaches and neoteric methods used in plant NMD researches.

Research progress in the degradation of printing and dyeing wastewater using chitosan based composite photocatalytic materials.

The surge in economic growth has spurred the expansion of the textile industry, resulting in a continuous rise in the discharge of printing and dyeing wastewater. In contrast, the photocatalytic method harnesses light energy to degrade pollutants, boasting low energy consumption and high efficiency. Nevertheless, traditional photocatalysts suffer from limited light responsiveness, inadequate adsorption capabilities, susceptibility to agglomeration, and hydrophilicity, thereby curtailing their practical utility. Consequently, integrating appropriate carriers with traditional photocatalysts becomes imperative. The combination of chitosan and semiconductor materials stands out by reducing band gap energy, augmenting reactive sites, mitigating carrier recombination, bolstering structural stability, and notably advancing the photocatalytic degradation of printing and dyeing wastewater. This study embarks on an exploration by initially elucidating the technical principles, merits, and demerits of prevailing printing and dyeing wastewater treatment methodologies, with a focal emphasis on the photocatalytic approach. It delineates the constraints encountered by traditional photocatalysts in practical scenarios. Subsequently, it comprehensively encapsulates the research advancements and elucidates the reaction mechanisms underlying chitosan based composite materials employed in treating printing and dyeing wastewater. Finally, this work casts a forward-looking perspective on the future research trajectory of chitosan based photocatalysts, particularly in the realm of industrial applications.

Metal chloride cathodes for next-generation rechargeable lithium batteries.

Rechargeable lithium-ion batteries (LIBs) have prospered a rechargeable world, predominantly relying on various metal oxide cathode materials for their abilities to reversibly de-/intercalate lithium-ion, while also serving as lithium sources for batteries. Despite the success of metal oxide, issues including low energy density have raised doubts about their suitability for next-generation lithium batteries. This has sparked interest in metal chlorides, a neglected cathode material family. Metal chlorides show promise with factors like energy density, diffusion coefficient, and compressibility. Unfortunately, challenges like high solubility hamper their utilization. In this review, we highlight the opportunities for metal chlorides in the post-lithium-ion era. Subsequently, we summarize their dissolution challenges. Furthermore, we discuss recent advancements, encompassing liquid-state electrolyte engineering, solid-state electrolytes (SSEs) cooperation, and LiCl-based cathodes. Finally, we provide an outlook on future research directions of metal chlorides, emphasizing electrode fabrication, electrolyte design, the application of SSEs, and the exploration of conversion reactions.

A Tailored Interface Design for Anode-Free Solid-State Batteries.

Anode-free solid-state batteries (AFSSBs) are considered to be one of the most promising high-safety and high-energy storage systems. However, low Coulombic efficiency stemming from severe deterioration on solid electrolyte/current collector (Cu foil) interface and undesirable Li dendrite growth impede their practical application, especially when rigid garnet electrolyte is used. Here, an interfacial engineering strategy between garnet electrolyte and Cu foil is introduced for stable and highly efficient AFSSBs. By utilizing the high Li ion conductivity of LiC6 layer, interfacial self-adaption ability arising from ductile lithiated polyacrylic acid polymer layer and regulated Li deposition via Li-Ag alloying reaction, the garnet-based AFSSB delivers a stable long-term operation. Additionally, when combined with a commercial LiCoO2 cathode (3.1 mAh cm-2 ), the cell also exhibits an outstanding capacity retention due to the tailored interface design. The strategies for novel AFSSBs architecture thus offer an alternative route to design next-generation batteries with high safety and high density.

Effective Charging of Commercial Lithium Cell by Triboelectric Nanogenerator with Ultrahigh Voltage Energy Management.

It is an increasingly mature application solution that triboelectric nanogenerator (TENG) supplies power to electronic devices through its power management system (PMS). However, the previous PMS is able to manage a limited voltage magnitude and the energy storage elements are limited to capacitors. This work proposes an ultrahigh voltage PMS (UV-PMS) to realize the charging of commercial lithium cells (LCs) by TENG. The design of UV-PMS enables energy management of TENGs with ultrahigh open-circuit voltages up to 3500 V and boosts the peak charging current from 30.9 µA to 2.77 mA, an increase of 89.64 times. With the introduction of UV-PMS, the effective charging capacity of LC charged by a TENG at a working frequency of 1.5 Hz for 1 h comes to 429.7 µAh, making a 75.3 times enhancement compared to charging by TENG directly. The maximum charging power comes to 1.56 mW. The energy storage efficiency is above 97% and the overall charge efficiency can be maintained at 81.2%. This work provides a reliable strategy for TENG to store energy in LC, and has promising applications in energy storage, LC's life, and self-powered systems.

An Active Halide Catholyte Boosts the Extra Capacity for All-Solid-State Batteries.

Replacing flammable organic liquid electrolytes with nonflammable solid electrolytes (SEs) in lithium batteries is crucial for enhancing safety across various applications, including portable electronics, electric vehicles, and scalable energy storage. Since typical cathode materials do not possess superionic conductivity, Li-ion conduction in the cathode predominantly relies on incorporating a significant number of SEs as additives to form a composite cathode, which substantially compromises the energy density of solid-state lithium batteries. Here, a halide SE, Li3VCl6 is demonstrated, which not only exhibits a decent Li+ conductivity, but more importantly, delivers a highly reversible capacity of approximately 80 mAh g-1 with an average voltage of 3 V versus Li+/Li. The ionic conductivity of Li3VCl6 experiences marginal fluctuations upon electrochemical lithiation/delithiation, as its prototypical solid-solution reaction results solely in a reduction of lithium vacancy. When combined with the traditional LiFePO4 cathode, the active Li3VCl6 catholyte enables an impressive capacity of 217.1 mAh g-1 LFP and about 50% increase in energy density compared with inactive catholytes. Harnessing the integrated mass of the catholyte-which can serve as an active material-presents an opportunity to boost the extra capacity, rendering it feasible in applications.

Prenatal exposure to per- and polyfluoroalkyl substances, fetal thyroid function, and intelligence quotient at 7 years of age: Findings from the Sheyang Mini Birth Cohort Study.

BACKGROUND: Prenatal exposure to per- and polyfluoroalkyl substances (PFASs) influences neurodevelopment. Thyroid homeostasis disruption is thought to be a possible underlying mechanism. However, current epidemiological evidence remains inconclusive. OBJECTIVES: This study aimed to explore the effects of prenatal PFAS exposure on the intelligence quotient (IQ) of school-aged children and assess the potential mediating role of fetal thyroid function. METHODS: The study included 327 7-year-old children from the Sheyang Mini Birth Cohort Study (SMBCS). Cord serum samples were analyzed for 12 PFAS concentrations and 5 thyroid hormone (TH) levels. IQ was assessed using the Wechsler Intelligence Scale for Children-Chinese Revised (WISC-CR). Generalized linear models (GLM) and Bayesian Kernel Machine Regression (BKMR) were used to evaluate the individual and combined effects of prenatal PFAS exposure on IQ. Additionally, the impact on fetal thyroid function was examined using a GLM, and a mediation analysis was conducted to explore the potential mediating roles of this function. RESULTS: The molar sum concentration of perfluorinated carboxylic acids (ΣPFCA) in cord serum was significantly negatively associated with the performance IQ (PIQ) of 7-year-old children (ß = -6.21, 95 % confidence interval [CI]: -12.21, -0.21), with more pronounced associations observed among girls (ß = -9.57, 95 % CI: -18.33, -0.81) than in boys. Negative, albeit non-significant, cumulative effects were noted when considering PFAS mixture exposure. Prenatal exposure to perfluorooctanoic acid, perfluorononanoic acid, and perfluorooctanesulfonic acid was positively associated with the total thyroxine/triiodothyronine ratio. However, no evidence supported the mediating role of thyroid function in the link between PFAS exposure and IQ. CONCLUSIONS: Increased prenatal exposure to PFASs negatively affected the IQ of school-aged children, whereas fetal thyroid function did not serve as a mediator in this relationship.

Simultaneous determination of twelve neonicotinoids and six metabolites in human urine with isotope-dilution UPLC-Q-Orbitrap HRMS.

The extensive global use of neonicotinoid insecticides (NNIs) has led to widespread human exposure, necessitating the development of effective methods for large-scale biomonitoring. However, current methods are inadequate in simultaneously and accurately detecting various NNIs or their metabolites (m-NNIs). In this study, we aimed to establish a robust method using solid-phase extraction (SPE)-ultra high performance liquid chromatography tandem Q-Orbitrap high resolution mass spectrometry (UPLC-Q-Orbitrap HRMS) for the simultaneous determination of 12 NNIs and 6 m-NNIs in human urine. Samples were prepared using Oasis HLB 96 well plate with Isopropanol: methanol (7:3, v/v) as the elution solvent. The target compounds were separated using the Accucore RP-MS column and subsequently analyzed under parallel reaction monitoring mode. NTN32692 (m/z = 255.06433) was confirmed to be the specific metabolite of cycloxaprid for the further detection. Satisfactory recoveries (81.6-122.4 %) of the NNIs and m-NNIs were observed, with intra- (n = 3) and inter-day (n = 9) relative standard deviation (RSD) ranging from 0.8 % to 13.7 % and from 1.1 % to 18.6 %, respectively. Good linearity (R2 > 0.99) was achieved for all analytes. The limits of detection (LODs) for all target analytes ranged from 0.01 ng/mL to 0.65 ng/mL. This method was applied to urine samples collected from 10 children recruited from an agricultural area in China. Our study provides an effective method to identify and assess human exposure to NNIs and their metabolites.

Promoting high-voltage stability through local lattice distortion of halide solid electrolytes.

Stable solid electrolytes are essential to high-safety and high-energy-density lithium batteries, especially for applications with high-voltage cathodes. In such conditions, solid electrolytes may experience severe oxidation, decomposition, and deactivation during charging at high voltages, leading to inadequate cycling performance and even cell failure. Here, we address the high-voltage limitation of halide solid electrolytes by introducing local lattice distortion to confine the distribution of Cl-, which effectively curbs kinetics of their oxidation. The confinement is realized by substituting In with multiple elements in Li3InCl6 to give a high-entropy Li2.75Y0.16Er0.16Yb0.16In0.25Zr0.25Cl6. Meanwhile, the lattice distortion promotes longer Li-Cl bonds, facilitating favorable activation of Li+. Our results show that this high-entropy halide electrolyte boosts the cycle stability of all-solid-state battery by 250% improvement over 500 cycles. In particular, the cell provides a higher discharge capacity of 185 mAh g-1 by increasing the charge cut-off voltage to 4.6 V at a small current rate of 0.2 C, which is more challenging to electrolytes|cathode stability. These findings deepen our understanding of high-entropy materials, advancing their use in energy-related applications.

Piezoresistive Pressure Sensor Based on a Conductive 3D Sponge Network for Motion Sensing and Human-Machine Interface.

Flexible sensors have attracted increasing attention owing to their important applications in human activity monitoring, medical diagnosis, and human-machine interaction. However, the rational design of low-cost sensors with desirable properties (e.g., high sensitivity and excellent stability) and extended applications is still a great challenge. Herein, a simple and cost-effective strategy is reported by immersing polyurethane (PU) sponge in graphene oxide solution followed by in situ chemical reduction to construct a reduced graphene oxide (RGO)-wrapped PU sponge sensor. Ascribed to the excellent compressive resilience of PU sponge and an electrically conductive RGO layer, the constructed flexible sensor exhibits satisfactory sensing performance with high sensitivity (17.65 kPa-1) in a low-load range (0-3.2 kPa), a wide compression strain range (0-80%), and reliable stability (8000 cycles). In addition, these sensors can be successfully applied to monitor human movements and identify the weight of objects. Through the use of a sensor array integrated with a signal acquisition circuit, the reasonably designed sensors can realize tactile feedback via mapping real-time spatial distribution of pressure in complicated tasks and show potential applications in flexible electronic pianos, electronic skin, and remote real-time control of home electronics.

Suppression of Interphase Dissolution Via Solvent Molecule Tuning for Sodium Metal Batteries.

Solvent molecule tuning is used to alter the redox potentials of solvents or ion-solvent binding energy for high-voltage or low-temperature electrolytes. Herein, an electrolyte design strategy that effectively suppresses solid electrolyte interphase (SEI) dissolution and passivates highly-reactive metallic Na anode via solvent molecule tuning is proposed. With rationally lengthened phosphate backbones with ─CH2 ─ units, the low-solvation tris(2-ethylhexyl) phosphate (TOP) molecule effectively weakens the solvation ability of carbonate-based electrolytes, reduces the free solvent ratio, and enables an anion-enriched primary Na+ ion solvation sheath. The decreased free solvent and compact lower-solubility interphase established in this electrolyte prevent electrodes from continuous SEI dissolution and parasitic reactions at both room temperature (RT) and high temperature (HT). As a result, the Na/Na3 V2 (PO4 )3 cell with the new electrolyte achieves impressive cycling stability of 95.7% capacity retention after 1800 cycles at 25 °C and 62.1% capacity retention after 700 cycles at 60 °C. Moreover, the TOP molecule not only maintains the nonflammable feature of phosphate but also attains higher thermal stability, which endows the electrolyte with high safety and thermal stability. This design concept for electrolytes offers a promising path to long-cycling and high-safety sodium metal batteries.

Beneficial effects of flavonoids on animal models of atherosclerosis: A systematic review and meta-analysis.

Atherosclerosis is the main cause of cardiovascular diseases that seriously endanger human health. The existing treatment drugs are effective, but they have some side effects. Accumulating evidence suggests that flavonoids have attracted wide attention due to their multiple cardioprotective effects and fewer side effects. PubMed, Web of Science database, Embase, and Cochrane Library were searched for studies evaluating the effects of flavonoids against atherosclerosis. 119 studies published from August 1954 to April 2023 were included. Random-effects models were performed for synthesis. Compared with the control group, flavonoids significantly reduced longitudinal and cross-sectional plaque area. The findings indicated that flavonoids significantly reduced the concentrations of serum TC, TG, and LDL-C and increased serum HDL-C concentrations. Besides, flavonoids reduced the levels of circulating pro-inflammatory factors, including TNF-α, IL-1ß, and IL-6, and increased the serum IL-10 level. This study provides evidence for the potential cardiovascular benefits of flavonoids.