Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Nanotechnology ; 32(31)2021 May 14.
Artigo em Inglês | MEDLINE | ID: mdl-33862600

RESUMO

Refractory materials exhibit high damage tolerance, which is attractive for the creation of nanoscale field-emission electronics and optoelectronics applications that require operation at high peak current densities and optical intensities. Recent results have demonstrated that the optical properties of titanium nitride, a refractory and CMOS-compatible plasmonic material, can be tuned by adding silicon and oxygen dopants. However, to fully leverage the potential of titanium (silicon oxy)nitride, a reliable and scalable fabrication process with few-nm precision is needed. In this work, we developed a fabrication process for producing engineered nanostructures with gaps between 10 and 15 nm, aspect ratios larger than 5 with almost 90° steep sidewalls. Using this process, we fabricated large-scale arrays of electrically-connected bow-tie nanoantennas with few-nm free-space gaps. We measured a typical variation of 4 nm in the average gap size. Using applied DC voltages and optical illumination, we tested the electronic and optoelectronic response of the devices, demonstrating sub-10 V tunneling operation across the free-space gaps, and quantum efficiency of up to 1 × 10-3at 1.2µm, which is comparable to a bulk silicon photodiode at the same wavelength and three orders of magnitude higher than with nearly identical gold devices. Tests demonstrated that the titanium silicon oxynitride nanostructures did not significantly degrade, exhibiting less than 5 nm of shrinking of the average gap dimensions over few-µm2areas after 10 h of operation. Our results will be useful for developing the next generation of robust and CMOS-compatible nanoscale devices for high-speed and low-power field-emission electronics and optoelectronics applications.

2.
Opt Lett ; 38(22): 4861-3, 2013 Nov 15.
Artigo em Inglês | MEDLINE | ID: mdl-24322151

RESUMO

We report on the design and experimental demonstration of array-enhanced nanoantennas for polarization-controlled multispectral nanofocusing in the near-IR spectral range. We design plasmonic double bow-tie nanoantennas-coupled to multiple-periodic nanoparticle arrays to harvest radiation of designed wavelengths from a large spatial area and to focus it into a targeted nanoscale region. Near-field calculations were performed on a gold nanoantenna array using three-dimensional finite difference time domain simulations. Cross-shaped optical nanoantennas were fabricated on glass substrates using electron beam lithography. The optical characterization of the fabricated nanoantennas was performed using second harmonic excitation spectroscopy that demonstrates multiwavelength photonic coupling in good agreement with the antenna modeling. The nanoantenna structures introduced in this Letter provide the ability to focus optical energy into deep subwavelength areas and to address multiple spectral regions with polarization control. Such attributes are highly desirable in optical biosensing, enhanced Raman scattering, and for nonlinear plasmonic applications.


Assuntos
Ouro/química , Nanopartículas Metálicas/química , Nanotecnologia/instrumentação , Refratometria/instrumentação , Ressonância de Plasmônio de Superfície/instrumentação , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Luz , Fótons , Espalhamento de Radiação
3.
Nature ; 408(6811): 440-4, 2000 Nov 23.
Artigo em Inglês | MEDLINE | ID: mdl-11100719

RESUMO

Adding optical functionality to a silicon microelectronic chip is one of the most challenging problems of materials research. Silicon is an indirect-bandgap semiconductor and so is an inefficient emitter of light. For this reason, integration of optically functional elements with silicon microelectronic circuitry has largely been achieved through the use of direct-bandgap compound semiconductors. For optoelectronic applications, the key device is the light source--a laser. Compound semiconductor lasers exploit low-dimensional electronic systems, such as quantum wells and quantum dots, as the active optical amplifying medium. Here we demonstrate that light amplification is possible using silicon itself, in the form of quantum dots dispersed in a silicon dioxide matrix. Net optical gain is seen in both waveguide and transmission configurations, with the material gain being of the same order as that of direct-bandgap quantum dots. We explain the observations using a model based on population inversion of radiative states associated with the Si/SiO2 interface. These findings open a route to the fabrication of a silicon laser.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA