Analytical Photoresponses of Gated Nanowire Photoconductors.

Low-dimensional photoconductors have extraordinarily high photoresponse and gain, which can be modulated by gate voltages as shown in literature. However, the physics of gate modulation remains elusive. In this work, the physics of gate modulation in silicon nanowire photoconductors with the analytical photoresponse equations is investigated. It is found that the impact of gate voltage varies vastly for nanowires with different size. For the wide nanowires that cannot be pinched off by high gate voltage, it is found that the photoresponses are enhanced by at least one order of magnitude due to the gate-induced electric passivation. For narrow nanowires that starts with a pinched-off channel, the gate voltage has no electric passivation effect but increases the potential barrier between source and drain, resulting in a decrease in dark and photocurrent. For the nanowires with an intermediate size, the channel is continuous but can be pinched off by a high gate voltage. The photoresponsivity and photodetectivity is maximized during the transition from the continuous channel to the pinched-off one. This work provides important insights on how to design high-performance photoconductors.

Near-infrared and mid-infrared light emission of boron-doped crystalline silicon.

The bottleneck in achieving fully integrated silicon photonics lies in silicon-based light-emitting devices that are compatible with standard CMOS technology. Dislocation loops created by implanting boron into silicon and annealing represent an enticing strategy to transform highly inefficient silicon into a luminescent material. However, the emission at telecommunication wavelength suffers from the strong thermal quenching effect, resulting in low efficiency at room temperature. Here, we applied a new deep cooling process to address this issue. Interestingly, we find that electrons and holes recombine through defects emitting two photons, one in near infrared (NIR, 1.3∼1.6 µm) and the other in mid-infrared band (MIR, around 3.5 µm). The photoluminescence intensity at NIR increases three fold when the temperature increases from 77 K to 300 K. Furthermore, the NIR light emission of reverse biased silicon diodes was significantly enhanced compared to forward bias, emitting the maximum output power of 42 nW at 60 mA. The results offer new opportunities for the development of infrared light sources in integrated circuits.

Waveguide-integrated van der Waals heterostructure photodetector on a lithium niobate on insulator platform.

Lithium niobate (LN) photonics has gained significant interest for their distinct material properties. However, achieving monolithically integrated photodetectors on lithium niobate on an insulator (LNOI) platform for communication wavelengths remains a challenge due to the large bandgap and extremely low electrical conductivity of LN material. A two-dimensional (2D) material photodetector is an ideal solution for LNOI photonics with a strong light-matter interaction and simple integration technique. In this work, a van der Waals heterostructure photodiode composed of a p-type black phosphorus layer and an n-type MoS2 layer is successfully demonstrated for photodetection at communication wavelengths on a LNOI platform. The LNOI waveguide-integrated BP-MoS2 photodetector exhibits a dark current as low as 0.21 nA and an on/off ratio exceeding 200 under zero voltage bias with an incident power of 13.93 µW. A responsivity as high as 1.46 A/W is achieved at -1 V bias with a reasonable dark current around 2.33 µA. With the advantages of high responsivity, low dark current, and simple fabrication process, it is promising for the monolithically integrated photodetector application for LNOI photonic platforms at communication wavelengths.

Analytical Impact-Excitation Theory of Er/O/B Codoped Si Light-Emitting Diodes.

Er doped Si light-emitting diodes may find important applications in silicon photonics and optical quantum computing. These diodes exhibit an emission efficiency 2 orders of magnitude higher at reverse bias than forward bias due to impact excitation. However, physics of impact excitation in these devices remains largely unexplored. In this work, we fabricated an Er/O/B codoped Si light-emitting diode which exhibits a strong electroluminescence by the impact excitation of electrons inelastically colliding the Er ions. An analytical impact-excitation theory was established to predict the electroluminescence intensity and internal quantum efficiency which fit well with the experimental data. From the fittings, we find that the excitable Er ions reach a record concentration of 1.8×10^{19} cm^{-3} and up to 45% of them is in an excitation state by impact excitation. This work has important implications for developing efficient classical and quantum light sources based on rare earth elements in semiconductors.

High-performance plasmonic mid-infrared bandpass filters by inverse design.

Plasmonic spectral filters composed of periodic nanostructured metal films offer novel opportunities for the development of multispectral imaging technologies in the mid-infrared region. However, traditional plasmonic filters, which typically feature simplistic structures such as nanoholes or nanorings, are constrained by a narrow bandpass and significant crosstalk, leading to limited practical performance. Filters designed using inverse techniques allow a substantial degree of freedom in creating intricate structures that align with desired spectral characteristics, including a quasi-square spectral profile, high transmission, wide full width at half maximum, and reduced crosstalk. In this study, we have utilized an inverse design algorithm to engineer high-performance bandpass filters for the mid-infrared range, achieving an average transmittance exceeding 80% within the bandpass window and below 10% in the stop band, which is comparable to that of commercial multilayer Bragg filters. Nanofabrication processes were employed to transfer the designed pattern into the gold film on ZnS substrate that is transparent in the mid-infrared range. The resulting filters exhibit spectral performance analogous to that of the inversely designed models, making them suitable for direct integration with mid-infrared photodetector arrays in multispectral imaging systems.

Nonlinear absorption and integrated photonics applications of MoSSe.

This study explores the wavelength-dependent and pulse-width-dependent nonlinear optical properties of liquid-phase exfoliated molybdenum sulfide selenide (MoSSe) nanosheets. The saturable absorption response of MoSSe nanosheets in the visible region is better than that in the near-infrared region, and the response under 6-ns pulse excitation is better than that of a 380-fs pulse. Furthermore, based on the first-principles calculations, we designed a phase modulator and optimized its structure by integrating a monolayer MoSSe into a silicon slot waveguide. The simulation results revealed that the phase shift could achieve a high optical extinction. Consequently, MoSSe exhibits satisfactory nonlinear optical properties and an excellent potential for applications in optoelectronic devices.

Explicit Gain Equations for Hybrid Graphene-Quantum-Dot Photodetectors.

Graphene is an attractive material for broadband photodetection but suffers from weak light absorption. Coating graphene with quantum dots can significantly enhance light absorption and create extraordinarily high photogain. This high gain is often explained by the classical gain theory which is unfortunately an implicit function and may even be questionable. In this work, explicit gain equations for hybrid graphene-quantum-dot photodetectors are derived. Because of the work function mismatch, lead sulfide quantum dots coated on graphene will form a surface depletion region near the interface of quantum dots and graphene. Light illumination narrows down the surface depletion region, creating a photovoltage that gates the graphene. As a result, high photogain in graphene is observed. The explicit gain equations are derived from the theoretical gate transfer characteristics of graphene and the correlation of the photovoltage with the light illumination intensity. The derived explicit gain equations fit well with the experimental data, from which physical parameters are extracted.

Extended infrared responses in Er/O-hyperdoped Si at room temperature.

Silicon photonics has become the preferred candidate for technologies applicable to multifarious fields. However, the applications are strictly limited by the intrinsic in-band photo effect of silicon. Herein, near-infrared photodetectors that break through the silicon bandgap by Er/O hyperdoping are fabricated, potentially extending their applications into telecommunications, low-light-level night vision, medical treatment, and others. Er/O-hyperdoped silicon was achieved as an infrared light absorption layer through ion implantation. The lattice damage caused by ion implantation was repaired by a deep cooling process in which high-temperature samples were cooled by helium flushing cooled by liquid nitrogen. Traditional junction and metallization processes were performed to form a photodiode. We demonstrate that the device has a spectral range up to the wavelength of 1568 nm, a maximum responsivity of 165 µA/W at 1310 nm, and 3 dB cutoff bandwidth up to 3 kHz. Finally, temperature-dependent optical-electrical characteristics were measured to demonstrate the activation mechanism of Er/O in silicon. This Letter proves silicon's potential in realizing extended infrared detection at room temperature, and it provides a possible way to fabricate infrared optoelectronics and signal processing integrated chips on a CMOS (complementary metal-oxide-semiconductor) platform.

Silicon nanowire core-shell PN junction phototransistors by self-assembled monolayer doping.

Nanoscale photoconductors often have extremely high gain in quantum efficiency but suffer from the difficulty to design the density of surface states that cause the high photogain. In this Letter, we created high-gain photoconductors by forming a core-shell PN junction in silicon nanowires via self-assembled molecular monolayer doping. The highly doped n-type shell deactivates all the surface states by filling with electrons so that the n-type shell as a well, instead of the surface states, captures and emits photogenerated minority electrons under ON/OFF light illumination. The corresponding excess majority holes are accumulated in the nanowire channel and thus modulate the channel width, resulting in the experimentally observed high photogain (∼108). The photoresponses of these phototransistors were systematically investigated as a function of the nanowire width and light illumination intensity. The results show that the nanowire channel is pinched off for the nanowires narrower than 73 nm due to the core-shell PN junction. We further derived analytical equations based on the PN junction device principle, finding the explicit gain equation that governs the photogain as a function of light intensity and other physical parameters of the nanowires. The explicit gain equations can fit well with the experimental data and allow us to design the core-shell nanowire phototransitors with desired performance.

Plasmonic micropipe spectral filters in mid-infrared.

Multispectral analyzers based on nanostructured plasmonic spectral filters can potentially find a wide range of applications. However, spectral filters based on the widely reported microhole or ring arrays suffer from relatively wide filtering bands, resulting in a relatively low spectral resolution. In this work, we fabricate high-performance spectral filters based on vertically standing micropipes on a silver film. An infrared spectral microscope is used to investigate the properties of these micropipe spectral filters. The results indicate that the micropipe spectral filters have a full width at half-maximum ∼5 times smaller than the microhole filters at the same wavelength. Micropipe spectral filters are expected to significantly improve the spectral resolution of multispectral analyzers.

Si nanowire phototransistors at telecommunication wavelengths by plasmon-enhanced two-photon absorption.

The on-chip integration of optical waveguides with complementary metal-oxide-semiconductor (CMOS) transistors is the next generation technology for high-speed communications. The advance of such a technology requires a high-performance photodetector operating at communication wavelengths. However, silicon does not absorb photons at communication wavelengths because of its relatively large bandgap. Growing high quality small bandgap semiconductors on top of silicon is challenging due to lattice mismatch. An all silicon photonic CMOS technology is an attractive option. Here, we demonstrate a high-performance silicon phototransistor that operates at the communication wavelengths by two-photon absorption effect. To turn silicon into a light absorptive material at communication wavelengths, we have designed a sophisticated plasmonic antenna structure to increases the intensity of light in the silicon nanowire by 5 orders of magnitude. At the high light intensity, the light absorption in silicon is dominated by the two-photon absorption effect. The generated photocurrent is further amplified by the Si nanowire phototransistor, a section of which is doped to be a core-shell pn junction. Simulation results indicate that the device can achieve a responsivity of 2.4×104 A/W and a 3-dB bandwidth over 300 GHz. Successful development of such a device is important for the next generation high-speed communication technology.

Filter-free image sensor pixels comprising silicon nanowires with selective color absorption.

The organic dye filters of conventional color image sensors achieve the red/green/blue response needed for color imaging, but have disadvantages related to durability, low absorption coefficient, and fabrication complexity. Here, we report a new paradigm for color imaging based on all-silicon nanowire devices and no filters. We fabricate pixels consisting of vertical silicon nanowires with integrated photodetectors, demonstrate that their spectral sensitivities are governed by nanowire radius, and perform color imaging. Our approach is conceptually different from filter-based methods, as absorbed light is converted to photocurrent, ultimately presenting the opportunity for very high photon efficiency.

Probing the Band Splitting near the Γ Point in the van der Waals Magnetic Semiconductor CrSBr.

This study investigates the electronic band structure of chromium sulfur bromide (CrSBr) through comprehensive photoluminescence (PL) characterization. We clearly identify low-temperature optical transitions between two closely adjacent conduction-band states and two different valence-band states. The analysis on the PL data robustly unveils energy splittings, band gaps, and excitonic transitions across different thicknesses of CrSBr, from monolayer to bulk. Temperature-dependent PL measurements elucidate the stability of the band splitting below the Néel temperature, suggesting that magnons coupled with excitons are responsible for the symmetry breaking and brightening of the transitions from the secondary conduction band minimum (CBM2) to the global valence band maximum (VBM1). Collectively, these results not only reveal splitting in both the conduction and valence bands but also highlight a significant advance in our understanding of the interplay between the optical, electronic, and magnetic properties of antiferromagnetic two-dimensional van der Waals crystals.

Strong Exciton-Phonon Coupling as a Fingerprint of Magnetic Ordering in van der Waals Layered CrSBr.

The layered, air-stable van der Waals antiferromagnetic compound CrSBr exhibits pronounced coupling among its optical, electronic, and magnetic properties. As an example, exciton dynamics can be significantly influenced by lattice vibrations through exciton-phonon coupling. Using low-temperature photoluminescence spectroscopy, we demonstrate the effective coupling between excitons and phonons in nanometer-thick CrSBr. By careful analysis, we identify that the satellite peaks predominantly arise from the interaction between the exciton and an optical phonon with a frequency of 118 cm-1 (∼14.6 meV) due to the out-of-plane vibration of Br atoms. Power-dependent and temperature-dependent photoluminescence measurements support exciton-phonon coupling and indicate a coupling between magnetic and optical properties, suggesting the possibility of carrier localization in the material. The presence of strong coupling between the exciton and the lattice may have important implications for the design of light-matter interactions in magnetic semiconductors and provide insights into the exciton dynamics in CrSBr. This highlights the potential for exploiting exciton-phonon coupling to control the optical properties of layered antiferromagnetic materials.

Dramatic reduction of surface recombination by in situ surface passivation of silicon nanowires.

Nanowires have unique optical properties and are considered as important building blocks for energy harvesting applications such as solar cells. However, due to their large surface-to-volume ratios, the recombination of charge carriers through surface states reduces the carrier diffusion lengths in nanowires a few orders of magnitude, often resulting in the low efficiency (a few percent or less) of nanowire-based solar cells. Reducing the recombination by surface passivation is crucial for the realization of high-performance nanosized optoelectronic devices but remains largely unexplored. Here we show that a thin layer of amorphous silicon (a-Si) coated on a single-crystalline silicon nanowire, forming a core-shell structure in situ in the vapor-liquid-solid process, reduces the surface recombination nearly 2 orders of magnitude. Under illumination of modulated light, we measure a greater than 90-fold improvement in the photosensitivity of individual core-shell nanowires, compared to regular nanowires without shell. Simulations of the optical absorption of the nanowires indicate that the strong absorption of the a-Si shell contributes to this effect, but we conclude that the effect is mainly due to the enhanced carrier lifetime by surface passivation.

Multicolored vertical silicon nanowires.

We demonstrate that vertical silicon nanowires take on a surprising variety of colors covering the entire visible spectrum, in marked contrast to the gray color of bulk silicon. This effect is readily observable by bright-field microscopy, or even to the naked eye. The reflection spectra of the nanowires each show a dip whose position depends on the nanowire radii. We compare the experimental data to the results of finite difference time domain simulations to elucidate the physical mechanisms behind the phenomena we observe. The nanowires are fabricated as arrays, but the vivid colors arise not from scattering or diffractive effects of the array, but from the guided mode properties of the individual nanowires. Each nanowire can thus define its own color, allowing for complex spatial patterning. We anticipate that the color filter effect we demonstrate could be employed in nanoscale image sensor devices.

Magnetophoretic capacitors for storing single particles and magnetized cells in microfluidic devices.

Precise positioning of magnetic particles and magnetized cells in lab-on-a-chip systems has attracted broad attention. Recently, drawing inspiration from electrical circuits, we have demonstrated a magnetic particle transport platform composed of patterned magnetic thin films in a microfluidic environment, which accurately moves the particles and single cells to specific spots, called capacitors. However, we have made no prior attempts to optimize the capacitor geometry. Here, we carefully analyze various design parameters and their effect on capacitor operation. We run simulations based on finite element methods and stochastic numerical analysis using our semi-analytical model. We then perform the required experiments to study the loading efficiency of capacitors with different geometries for magnetic particles of multiple sizes. Our experimental results agree well with the design criteria we developed based on our simulation results. We also show the capability of designed capacitors in storing the magnetically labeled cells and illustrate using them in a pilot drug screening application. These results are directly applicable to the design of robust platforms capable of transporting and assembling a large number of single particles and single cells in arrays, which are useful in the emerging field of single-cell analysis.

Atomically Thin Delta-Doping of Self-Assembled Molecular Monolayers by Flash Lamp Annealing for Si-Based Deep UV Photodiodes.

Delta doping (δ-doping) can find a wide range of applications in advanced metal oxide semiconductor field effect transistors, deep UV photodetectors, quantum devices, and others. In this work, we formed a δ-doping layer in silicon by employing flash lamp annealing to treat the PCl3 monolayers grafted on silicon surfaces. The δ-doping layer is atomically thin (<1 nm). Low-temperature Hall measurements show that the δ-doping layer is in a metallic state and exhibits a weak localization phenomenon, implying that a two-dimensional electron gas is formed. When we form such an n-type δ-doping layer on a highly doped p-type Si substrate, a highly sensitive solar-blind UV photodetector is created, which traditionally was only possible by using wide band gap semiconductors such as gallium nitride (GaN) or silicon carbide (SiC).

Size-selective nanoparticle growth on few-layer graphene films.

We observe that gold atoms deposited by physical vapor deposition onto few-layer graphenes condense upon annealing to form nanoparticles with an average diameter that is determined by the graphene film thickness. The data are well described by a theoretical model in which the electrostatic interactions arising from charge transfer between the graphene and the gold particle limit the size of the growing nanoparticles. The model predicts a nanoparticle size distribution characterized by a mean diameter D that follows a D proportional, variant m(1/3) scaling law where m is the number of carbon layers in the few-layer graphene film.

Analytical Transient Responses and Gain-Bandwidth Products of Low-Dimensional High-Gain Photodetectors.

Low-dimensional photodetectors, in particular those in photoconductive mode, often have extraordinarily high photogain. However, high gain always comes along with a slow frequency response. The gain-bandwidth product (GBP) is a figure of merit to evaluate the performance of a photodetector. Whether the high-gain photoconductors can outperform standard PIN photodiodes in terms of GBP remains an open question. In this article, we derived the analytical transient photoresponses of nanowire photoconductors which were validated with the simulations and experiments. Surprisingly, the fall transients do not follow a simple time-dependent exponential function except for some special cases. Given the analytical photogains that were established previously, we derived the theoretical GBP of high-gain nanowire photoconductors. Analysis of the analytical GBP indicates that nanoscale photoconductors, although having extremely high gain, will never outperform typical PIN photodiodes in terms of GBP.