The bandgap of sulfur-doped Ag2O nanoparticles.

A narrow band gap restricts photocatalytic applications of Ag2O nanoparticles, but appropriate doping can favorably modify this aspect. Given this, density functional theory (DFT) calculations were conducted, revealing that substitutional sulfur doping of Ag2O could increase its bandgap and stabilize oxygen vacancies. A hydrothermal precipitation protocol was employed to prepare sulfur-doped (S-doped) Ag2O nanoparticles. The band gap of the prepared nanoparticles increased to 1.89 eV with 1.25-mole percent S-doping. XPS analysis of the samples also revealed that S-doping increased oxygen vacancies in the prepared Ag2O nanoparticles. Furthermore, S-doping caused a major shift in the valence band position to a negative value. These doped Ag2O nanoparticles showed an enhanced visible-light photocatalytic activity towards rhodamine B (RhB) degradation.

Genesis of copper oxide nanoparticles from waste printed circuit boards and evaluation of their photocatalytic activity.

Discarded Printed Circuit Boards (PCBs) are one of the secondary resources of high-purity copper, and precious materials, which if disposed off inappropriately may present several environmental risks. This study focuses on the production of copper oxide nanoparticles (CuO NPs) from reclaimed copper via a facile precipitation route to obtain a value-added nanoproduct. The synthesis involved the dissolution of downsized PCBs, leaching of Cu into the solution phase and the precipitation of nanoparticles (NPs) in an alkaline medium. XRD analysis confirmed the as-synthesized NPs were monoclinic CuO of size 19.23 nm without any impurity. HRTEM analysis confirmed that the NPs were nearly round spheres with average particle size of 19.973 ± 6.036 nm. The NPs have a specific surface area of 200 m2/g and mesoporous structure with mean pore diameter of 18.051 nm. The CuO NPs photocatalyzed the degradation of Congo Red under visible light irradiation. Hence, the PCB e-waste was utilized to produce nanomaterials with added-values, decreasing environmental problems.

Synthesis and characterization of titanium-substituted nanocrystalline Co2-Y hexaferrite: magnetically retrievable photocatalyst for treatment of methyl orange contaminated wastewater.

Rapid industrial growth causes considerable environmental havoc, adversely affecting human and aqueous life. It becomes a significant concern to deal with adequate wastewater treatment strategies by converging on water scarcity. This research work explored the synthesis of titanium-substituted Y-type barium hexaferrite (Co2-Y), having a general formula of Ba2Co2Fe12-xTixO22 (x = 0.0, 0.1, 0.2, 0.3, 0.4, and 0.5), using a facile nitrate-based sol-gel auto-combustion route and its suitability was investigated as a heterogeneous catalyst within the photo-Fenton-based degradation of methyl orange (MO), one of the significant pollutants generated from textile industries. Developing a thermochemically stable and magnetically separable heterogeneous catalyst for photocatalytic decomposition of nonbiodegradable organic dye from wastewater was also emphasized. The as-prepared nanocrystalline Co2-Y powders were analyzed using XRD, FTIR, DLS, UV-visible spectroscopy, SEM, VSM, and XPS. Furthermore, the photocatalytic degradation performance of pristine and titanium substituted Ba2Co2Fe11.6Ti0.4O22 ferrite, having the lowest bandgap value among all samples, was quantified and compared in terms of apparent rate constant (karc) value and turnover frequency values. The enriched photocatalytic performance was correlated with the existence of multi-valance states of transition metal cations and the availability of oxygen vacancy, confirmed by the surface chemistry using the XPS analysis. The modified (enhanced thermal and chemical stability) hexaferrite catalyst was magnetically separable and reusable without significant losses to its catalytic performance. This promising catalyst may be considered as a replacement for soft ferrite materials to catalyze the degradation of several other nonbiodegradable organic pollutants from wastewater in large-scale industries.

Waste remediation: Low-temperature synthesis of hybrid Cu(OH)2/CuO and CuO nanostructures from spent printed circuit boards and their dye degradation studies.

The demand for environmentally friendly and sustainable resource utilization techniques for recycling waste printed circuit boards is significant due to their status as valuable secondary resources, containing high-purity copper and precious metals. In this context, Cu(OH)2/CuO and CuO nanostructures were fabricated using alkaline precipitation and low-temperature aging methods using the strip solution originated from laboratory-scale spent mobile phone printed circuit board recovery process. XRD, FTIR, FESEM-EDX, and TEM were utilized to characterize the as-recovered nanoproducts. A hybrid structure of Cu(OH)2/CuO was formed at 70°, and monoclinic CuO phase was formed at 80 °C aging time. The results show that Cu(OH)2/CuO nanoflakes have an average crystallite size of 24.06 nm and a particle width of 22 ± 3 nm. Cu(OH)2/CuO nanoflakes formed at 70 °C aging temperature and 24-h residence time have finer crystallite and particle sizes than CuO-ridged nanospheres formed at 80 °C aging temperature. The optical band gap energy of Cu(OH)2/CuO and CuO nanostructures formed was found to be 2.28 eV and 2.22 eV, respectively. The hybrid Cu(OH)2/CuO nanostructure photocatalyzed the decomposed 97.28% rhodamine blue using a visible light source, whereas the CuO nanostructure degraded only 14.64% rhodamine blue dye under similar conditions. A surfactant-less hybrid structure is developed without the use of any chemical precursor. Thus, a high value-added product is produced using one waste material to remove another waste in wastewater treatment.

Cd-doped Ag2O/BiVO4 visible light Z-scheme photocatalyst for efficient ciprofloxacin degradation.

Foreign element doping can produce new photocatalysts with different band edge positions and adsorption properties. A composite of such a doped semiconductor with another component should enhance its photocatalytic properties towards a target substrate. The present investigation used a simple hydrothermal protocol to prepare Cd-doped Ag2O nanoparticles. The Cd-doping of Ag2O nanoparticles changed its valence band maximum position from 0.8 eV (for undoped Ag2O nanoparticles) to 2.67 eV with a slight narrowing of the Ag2O bandgap. A combination of DFT calculation and XRD results showed that the dopant Cd substituted Ag in the Ag2O lattice. The doped material is an effective photocatalyst for ciprofloxacin degradation but with poor recyclability. The joining of a BiVO4 part to the Cd-doped Ag2O nanostructures gave a composite with improved photocatalytic activity and recyclability towards ciprofloxacin degradation. DFT calculations showed that BiVO4 has a higher oxygen affinity than Cd-doped Ag2O. The XPS characterization of the composite and appropriate active species scavenger experiments demonstrated a Z-scheme mechanism. Superoxide radicals play a critical role in CIP degradation.

Foot and Mouth Disease (FMD) incidence in cattle and buffaloes and its associated farm-level economic costs in endemic India.

The study investigated the important epidemiological parameters and farm-level economic costs of FMD incidence in cattle and buffaloes during 2013-14 to 2015-16 in various states of India. Multistage random sampling procedure was adopted for the primary survey and data was collected through face-to-face personal interview from 18,609 cattle and buffalo rearing farm households from 123 districts across twelve states and one Union Territory. Besides epidemiological parameters, different farm-level direct and indirect loss associated with FMD was assessed at disaggregated level (states) by employing deterministic mathematical models. Highest number of affected villages and disease incidence was observed in non- FMD control programme (FMD-CP) implemented Madhya Pradesh and Assam states, respectively whereas negligible incidence was in FMD-CP implemented Punjab state. The disease incidence was high during 2013-14 and declined during 2014-15 and 2015-16, respectively implied severe incidence scenario (2013-14) succeeded by moderate (2014-15) and mild (2015-16) scenarios. The crossbred and high productive animals were severely affected than local breeds whereas on sexwise and agewise comparison revealed higher incidence in females and adult animals. During severe incidence scenario, milk loss/animal ranged from USD 6.87-47.44, 18.42-125.88, 16.33-91.43, and 27.17-123.62; mortality loss/animal ranged from USD 32.61-804.27, 30.76-577.7, 65.36-502.2, and 188.04-413.7; distress sale loss/animal ranged from USD 3.22-188.63, 64.34-519.3, 214.47-341.8, and 209.11-450.3; and opportunity cost of labour/animal from USD 5.49-54.29, 5.49-67.78; 7.95-31.37 and 9.83-72.38 in indigenous cattle, crossbred cattle, local and improved buffalo, respectively. The estimated draught power loss/animal varied from USD 39.46-142.94 with least being in Madhya Pradesh and highest in Assam states whereas the median treatment cost/animal was USD 9.18 and USD 27.07 in indigenous cattle and upgraded buffaloes, respectively. The total farm-level economic loss projected due to FMD in cattle and buffaloes in India was USD 3159 million (INR 221,110 million), USD 270 million (INR 18,910 million) and USD 152 million (INR 10,610 million), respectively during the severe, moderate and mild incidence scenarios at 2015-16 constant prices. The loss varied across the states, and in severe incidence scenario, the country might lose USD 3.2 billion/year and hence, the bi-annual vaccination schedule need to be strictly implemented in all the states. Besides timely vaccination coverage, managing unabated animal movement, educating and motivating the farmers to vaccinate their animals might reduce the incidence and consequential losses to various stakeholders in endemic states like India.