An Enhanced GC/MS Procedure for the Identification of Proteins in Paint Microsamples.

The chemical characterization of materials used in works of art is extremely useful for gaining a better knowledge of the artistic heritage and to guarantee its preservation. A derivatization GC/MS procedure for the identification of proteins in a microsample from painted works of art has been optimized. The amino acid fraction is derivatized using anhydrous dimethylformamide (DMF) as solvent instead of pyridine (Py), commonly used to facilitate the reaction. Although pyridine is often considered a silylation catalyst, there are many instances in which silylation reactions actually are slower in pyridine than other solvents. In addition, pyridine also may have other undesirable effects such as the promotion of secondary products and other chromatographic anomalies. Using DMF, the formation of artifacts is limited and the derivatization yield of hydrophilic amino acids such as proline and hydroxyproline has improved, thus making the identification of organic paint media more straightforward. The method has been validated and successfully applied to identify the binder of the sample taken from the pictorial cycle of the 12th century monastery of Santa Maria delle Cerrate (Lecce, Italy), thus highlighting the use of eggs as a binding medium.

Facile synthesis of 3D flower-like Pt nanostructures on polypyrrole nanowire matrix for enhanced methanol oxidation.

Here we report the simple and rapid synthesis of three-dimension Pt flower-like nanostructures (PtNFs) on a polypyrrole nanowires (PPyNWs) matrix. Both PtNFs and PPyNWs are prepared by an electrochemical approach without using any seed, template or surfactant. The morphology and chemical composition of the resulting PtNF/PPyNWs hybrids are characterized by scanning electron microscopy and by X-ray photoelectron spectroscopy, respectively. Taking methanol oxidation as a model catalysis reaction, the electrocatalytic performance of the as-prepared PtNF/PPyNWs system has been evaluated by cyclic voltammetry and chronoamperometry, evidencing that these 3D materials exhibit excellent electrocatalytic activity and high level of poisoning tolerance to the carbonaceous oxidative intermediates. Such electrocatalytic performances can be ascribed to the combined effect of the flower-like structure promoting the exposure of more sites and the polymer nanowires matrix endorsing high dispersion of PtNF on a high electrochemically active surface area, besides the removal of sub-products from electrocatalytic sites.

Seasonal variability of PM2.5 and PM10 composition and sources in an urban background site in Southern Italy.

Comparison of fine and coarse fractions in terms of sources and dynamics is scarce in southeast Mediterranean countries; differences are relevant because of the importance of natural sources like sea spray and Saharan dust advection, because most of the monitoring networks are limited to PM10. In this work, the main seasonal variabilities of sources and processes involving fine and coarse PM (particulate matter) were studied at the Environmental-Climate Observatory of Lecce (Southern Italy). Simultaneous PM2.5 and PM10 samples were collected between July 2013 and July 2014 and chemically analysed to determine concentrations of several species: OC (organic carbon) and EC (elemental carbon) via thermo-optical analysis, 9 major ions via IC, and 23 metals via ICP-MS. Data was processed through mass closure analysis and Positive Matrix Factorization (PMF) receptor model characterizing seasonal variabilities of nine sources contributions. Organic and inorganic secondary aerosol accounts for 43% of PM2.5 and 12% of PM2.5-10 with small seasonal changes. SIA (secondary inorganic aerosol) seasonal pattern is opposite to that of SOC (secondary organic carbon). SOC is larger during the cold period, sulphate (the major contributor to SIA) is larger during summer. Two forms of nitrate were identified: NaNO3, correlated with chloride depletion and aging of sea-spray, mainly present in PM2.5-10; NH4NO3 more abundant in PM2.5. Biomass burning is a relevant source with larger contribution during autumn and winter because of the influence of domestic heating, however, is not negligible in spring and summer, because of the contributions of fires and agricultural practices. Mass closure analysis and PMF results identify two soil sources: crustal associated to long range transport and carbonates associated to local resuspended dust. Both sources contributes to the coarse fraction and have different dynamics with crustal source contributing mainly in high winds from SE conditions and carbonates during high winds from North direction.

Electrosynthesized non-conducting polymers as permselective membranes in amperometric enzyme electrodes: a glucose biosensor based on a co-crosslinked glucose oxidase/overoxidized polypyrrole bilayer.

A glucose amperometric biosensor based on glucose oxidase immobilized on an overoxidized polypyrrole (PPyox) platinum modified electrode, by glutaraldehyde co-crosslinking with bovine serum albumine, is described. The advantages of covalent immobilization techniques (e.g. high loading and long-term stability of the enzyme) are coupled with the excellent interferent rejection of electrosynthesized non-conducting polymers. The sensor showed an apparent Michaelis-Menten constant of 16 +/- 0.8 mM, a maximum current density of 490 microA/cm2 and a shelf lifetime of at least 3 months. Ascorbate, urate, cysteine and acetaminophen at their maximum physiological concentrations produced a glucose bias in the low micromolar range. Flow-injection response was linear up to 20 mM glucose with typical sensitivity of 84.0 +/- 1.5 nA/mM. The sensor was tested for glucose determination of untreated serum samples from both normal and diabetic subjects; results of amperometric assay compared well with those obtained by a standard enzymatic-colorimetric method.

Optimization of analytical and pre-analytical conditions for MALDI-TOF-MS human urine protein profiles.

Protein analysis in biological fluids, such as urine, by means of mass spectrometry (MS) still suffers for insufficient standardization in protocols for sample collection, storage and preparation. In this work, the influence of these variables on healthy donors human urine protein profiling performed by matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) was studied. A screening of various urine sample pre-treatment procedures and different sample deposition approaches on the MALDI target was performed. The influence of urine samples storage time and temperature on spectral profiles was evaluated by means of principal component analysis (PCA). The whole optimized procedure was eventually applied to the MALDI-TOF-MS analysis of human urine samples taken from prostate cancer patients. The best results in terms of detected ions number and abundance in the MS spectra were obtained by using home-made microcolumns packed with hydrophilic-lipophilic balance (HLB) resin as sample pre-treatment method; this procedure was also less expensive and suitable for high throughput analyses. Afterwards, the spin coating approach for sample deposition on the MALDI target plate was optimized, obtaining homogenous and reproducible spots. Then, PCA indicated that low storage temperatures of acidified and centrifuged samples, together with short handling time, allowed to obtain reproducible profiles without artifacts contribution due to experimental conditions. Finally, interesting differences were found by comparing the MALDI-TOF-MS protein profiles of pooled urine samples of healthy donors and prostate cancer patients. The results showed that analytical and pre-analytical variables are crucial for the success of urine analysis, to obtain meaningful and reproducible data, even if the intra-patient variability is very difficult to avoid. It has been proven how pooled urine samples can be an interesting way to make easier the comparison between healthy and pathological samples and to individuate possible differences in the protein expression between the two sets of samples.

Carbohydrate analysis by high-performance anion-exchange chromatography with pulsed amperometric detection: the potential is still growing.

This article reviews recent advances of carbohydrate analysis by high-performance anion-exchange chromatography with pulsed amperometric detection. Starting from the paper of Dennis C. Johnson [1] in which the great analytical promise of such a technique was anticipated, a multitude of exciting new research possibilities have recently emerged. The great attractiveness of high-performance anion-exchange chromatography is largely due to its compatibility with such a sensitive, selective and reliable detection method as pulsed amperometry. This very good match between liquid chromatography and electrochemical detection has allowed the determination of carbohydrates in a variety of complex matrices, for instance, foods, beverages, diary and biotechnological products, vegetal tissues, and also in the area of clinical diagnostics. For this reason, the introduction of HPAEC-PAD into regulated methods is becoming increasingly accepted. A comprehensive collection of applications to carbohydrates and samples of interest is given, with special focus on the separation of closely related sugar compounds using dilute alkaline eluents. Advances in pulsed potential waveforms are also discussed, and a comparison with other liquid chromatographic methods addressed. 2-keto-3-deoxy-D-glycero-D-galactonononic acid; KDO, 2-keto-3-deoxyoctulosonic acid; FOS, fructooligosaccharides; GF5, GF6, and GF7, oligofructans: Hib, Haemophilus influenzae type b; FAB, fast atom bombardment; ESI, electrospray ionization; MALDI-TOF, matrix assisted laser desorption ionization-time of flight.

Electrooxidation of thiocyanate on the copper-modified gold electrode and its amperometric determination by ion chromatography.

Cyclic voltammetry was used to investigate the electrochemical behavior of an Au/Cu electrode towards the electrooxidation of thiocyanate ion in alkaline medium. The effects of pH, copper loading, scan rate and applied potential on the electrocatalytic oxidation of thiocyanate have been investigated. Flow injection experiments and ion-chromatography (IC) were performed to characterise the electrode as an amperometric sensor for the thiocyanate determination. The effects of carbonate concentration and common interferents on the retention time were also estimated. The electrode stability, precision, limit of detection and linear range were evaluated at a constant applied potential of 0.7 V vs. Ag/AgCl. Calibration plots, obtained in IC, were linear from 1.0 to 195 microM (correlation coefficient of 0.9984). The detection limit (LOD) was 0.5 microM (29 ppb) in a 50 microlitres injection. An example of analytical application, which includes the IC separation and detection of thiocyanate ion present in human urine, is given.