Targeting the Inflammatory Hallmarks of Obesity-Associated Osteoarthritis: Towards Nutraceutical-Oriented Preventive and Complementary Therapeutic Strategies Based on n-3 Polyunsaturated Fatty Acids.

Obesity (Ob), which has dramatically increased in the last decade, is one of the main risk factors that contribute to the incidence and progression of osteoarthritis (OA). Targeting the characteristics of obesity-associated osteoarthritis (ObOA) may offer new chances for precision medicine strategies in this patient cohort. First, this review outlines how the medical perspective of ObOA has shifted from a focus on biomechanics to the significant contribution of inflammation, mainly mediated by changes in the adipose tissue metabolism through the release of adipokines and the modification of fatty acid (FA) compositions in joint tissues. Preclinical and clinical studies on n-3 polyunsaturated FAs (PUFAs) are critically reviewed to outline the strengths and weaknesses of n-3 PUFAs' role in alleviating inflammatory, catabolic and painful processes. Emphasis is placed on potential preventive and therapeutic nutritional strategies based on n-3 PUFAs, with a focus on ObOA patients who could specifically benefit from reformulating the dietary composition of FAs towards a protective phenotype. Finally, tissue engineering approaches that involve the delivery of n-3 PUFAs directly into the joint are explored to address the perspectives and current limitations, such as safety and stability issues, for implementing preventive and therapeutic strategies based on dietary compounds in ObOA patients.

Micro-fragmentation is a valid alternative to cell expansion and enzymatic digestion of adipose tissue for the treatment of knee osteoarthritis: a comparative preclinical study.

PURPOSE: The aim of this study was to compare three procedures to exploit adipose-derived cells for the treatment of osteoarthritis (OA) in a preclinical model, to understand their therapeutic potential and identify the most suitable approach for the clinical application. METHODS: Biological samples from adipose tissue, processed by mechanical micro-fragmentation (MF), enzymatic digestion (SVF) or cell expansion (ADSCs), were first characterized in vitro and then used in vivo in a surgically induced OA rabbit model: Group 1-control group (untreated 12 knees/saline 12 knees), Group 2-MF (24 knees), Group 3-SVF (24 knees), Group 4-ADSCs (24 knees). Macroscopic, histological, histomorphometric, immunohistochemical and blood and synovial fluid analyses were evaluated at 2 and 4 months from the treatments. RESULTS: Samples obtained by the three procedures yielded 85-95% of viable cells. In vivo assessments showed no significant side effects or inflammatory responses after the injection. The macroscopic Hanashi score did not show significant differences among treated groups and controls. The histopathological evaluation of synovial tissues showed lower signs of synovitis for MF, although the semiquantitative analysis (Krenn score) did not reach statistical significance. Instead, MF showed the best results both in terms of qualitative and semi-quantitative evaluations of articular cartilage, with a more uniform staining, a smoother surface and a significantly better Laverty score (p = 0.004). CONCLUSION: MF, SVF, and expanded ADSCs did not elicit significant local or systemic adverse reactions in this preclinical OA model. Among the different methods used to exploit the adipose tissue potential, MF showed the most promising findings in particular in terms of protection of the articular surface from the joint degenerative OA processes. LEVEL OF EVIDENCE: Preclinical animal study.

Overview of Anti-Inflammatory and Anti-Nociceptive Effects of Polyphenols to Halt Osteoarthritis: From Preclinical Studies to New Clinical Insights.

Knee osteoarthritis (OA) is one of the most multifactorial joint disorders in adults. It is characterized by degenerative and inflammatory processes that are responsible for joint destruction, pain and stiffness. Despite therapeutic advances, the search for alternative strategies to target inflammation and pain is still very challenging. In this regard, there is a growing body of evidence for the role of several bioactive dietary molecules (BDMs) in targeting inflammation and pain, with promising clinical results. BDMs may be valuable non-pharmaceutical solutions to treat and prevent the evolution of early OA to more severe phenotypes, overcoming the side effects of anti-inflammatory drugs. Among BDMs, polyphenols (PPs) are widely studied due to their abundance in several plants, together with their benefits in halting inflammation and pain. Despite their biological relevance, there are still many questionable aspects (biosafety, bioavailability, etc.) that hinder their clinical application. This review highlights the mechanisms of action and biological targets modulated by PPs, summarizes the data on their anti-inflammatory and anti-nociceptive effects in different preclinical in vitro and in vivo models of OA and underlines the gaps in the knowledge. Furthermore, this work reports the preliminary promising results of clinical studies on OA patients treated with PPs and discusses new perspectives to accelerate the translation of PPs treatment into the clinics.

Learning from Monocyte-Macrophage Fusion and Multinucleation: Potential Therapeutic Targets for Osteoporosis and Rheumatoid Arthritis.

Excessive bone resorption by osteoclasts (OCs) covers an essential role in developing bone diseases, such as osteoporosis (OP) and rheumatoid arthritis (RA). Monocytes or macrophages fusion and multinucleation (M-FM) are key processes for generating multinucleated mature cells with essential roles in bone remodelling. Depending on the phenotypic heterogeneity of monocyte/macrophage precursors and the extracellular milieu, two distinct morphological and functional cell types can arise mature OCs and giant cells (GCs). Despite their biological relevance in several physiological and pathological responses, many gaps exist in our understanding of their formation and role in bone, including the molecular determinants of cell fusion and multinucleation. Here, we outline fusogenic molecules during M-FM involved in OCs and GCs formation in healthy conditions and during OP and RA. Moreover, we discuss the impact of the inflammatory milieu on modulating macrophages phenotype and their differentiation towards mature cells. Methodological approach envisaged searches on Scopus, Web of Science Core Collection, and EMBASE databases to select relevant studies on M-FM, osteoclastogenesis, inflammation, OP, and RA. This review intends to give a state-of-the-art description of mechanisms beyond osteoclastogenesis and M-FM, with a focus on OP and RA, and to highlight potential biological therapeutic targets to prevent extreme bone loss.

3D printing of musculoskeletal tissues: impact on safety and health at work.

Additive manufacturing (commonly referred to as 3D printing) created an attractive approach for regenerative medicine research in musculoskeletal tissue engineering. Given the high number of fabrication technologies available, characterized by different working and physical principles, there are several related risks that need to be managed to protect operators. Recently, an increasing number of studies demonstrated that several types of 3D printers are emitters of ultrafine particles and volatile organic compounds whose harmful effects through inhalation, ingestion and skin uptake are known. Confirmation of danger of these products is not yet final, but this provides a basis to adopt preventive measures in agreement with the precautionary principle. The purpose of this investigation was to provide a useful tool to the researcher for managing the risks related to the use of different kinds of three-dimensional printers (3D printers) in the lab, especiallyconcerning orthopedic applications, and to define appropriate control measures. Particular attention was given to new emerging risks and to developing response strategies for a comprehensive coverage of the health and safety of operators.

Bone marrow concentrate and expanded mesenchymal stromal cell surnatants as cell-free approaches for the treatment of osteochondral defects in a preclinical animal model.

PURPOSE: To evaluate the regenerative potential of surnatants (SNs) from bone marrow concentrate (SN-BMC) and expanded mesenchymal stromal cells (SN-MSCs) loaded onto a collagen scaffold (SC) in comparison with cell-based treatments (BMC and MSCs) in an osteochondral (OC) defect model in rabbits. METHODS: OC defects (3 × 5 mm) were created in the rabbit femoral condyles and treated with SC alone or combined with SN-BMC, SN-MSCs, BMC, and MSCs. In control groups, the defects were left untreated. At three and six months, the quality of regenerated tissue was evaluated with macroscopic, histologic, microtomographic, and immunohistochemical assessments. The production of several immunoenzymatic markers was measured in the synovial fluid. RESULTS: All proposed treatments improved OC regeneration in comparison with untreated and SC-treated defects. Both BMC and MSCs showed a similar healing potential than their respective SNs, with the best performance exerted by BMC as demonstrated with macroscopic and histological scores and type I and II collagen results. CONCLUSIONS: SNs loaded onto SC exerted a positive effect on OC defect regeneration, underlying the biological significance of the trophic factors, thus potentially opening new opportunities for the use of cell-free-based therapies. BMC was confirmed to be the most beneficial treatment.

Regenerative Features of Adipose Tissue for Osteoarthritis Treatment in a Rabbit Model: Enzymatic Digestion Versus Mechanical Disruption.

Evaluating cell migration after cell-based treatment is important for several disorders, including osteoarthritis (OA), as it might influence the clinical outcome. This research explores migrating expanded-adipose stromal cells (ASCs) and adipose niches after enzymatic and mechanical processes. Bilateral anterior cruciate ligament transection induced a mild grade of OA at eight weeks in adult male New Zealand rabbits. ASCs, enzymatic stromal vascular fraction (SVF), and micro fragmented adipose tissue (MFAT) were intra-articularly injected in the knee joint. Assessments of cell viability and expression of specific markers, including CD-163 wound-healing macrophages, were done. Cell migration was explored through labelling with PKH26 dye at 7 and 30 days alongside co-localization analyses for CD-146. All cells showed good viability and high percentages of CD-90 and CD-146. CD-163 was significantly higher in MFAT compared to SVF. Distinct migratory potential and time-dependent effects were observed among cell-based treatments. At day 7, both ASCs and SVF migrated towards synovium, whereas for MFAT versus cartilage, a different migration pattern was noticed at day 30. The long-term distinct cell migration of ASCs, SVF, and MFAT open interesting clinical insights on their potential use for OA treatment. Moreover, the highest expression of CD-163 in MFAT, rather than SVF, might have an important role in directly mediating cartilage tissue repair responses.

Novel nano-composite biomimetic biomaterial allows chondrogenic and osteogenic differentiation of bone marrow concentrate derived cells.

In clinical orthopedics suitable materials that induce and restore biological functions together with the right mechanical properties are particularly needed for the regeneration of osteochondral lesions. For this purpose, the ideal scaffold should possess the right properties with respect to degradation, cell binding, cellular uptake, non-immunogenicity, mechanical strength, and flexibility. In addition, it should be easy to handle and serve as a template for chondrocyte and bone cells guiding both cartilage and bone formation. The aim of the present study was to estimate the chondrogenic and osteogenic capability of bone marrow concentrated derived cells seeded onto a novel nano-composite biomimetic material. These properties have been evaluated by means of histological, immunohistochemical and electron microscopy analyses. The data obtained demonstrated that freshly harvested cells obtained from bone marrow were able, once seeded onto the biomaterial, to differentiate either down the chondrogenic and osteogenic pathways as evaluated by the expression and production of specific matrix molecules. These findings support the use, for the repair of osteochondral lesions, of this new nano-composite biomimetic material together with bone marrow derived cells in a "one step" transplantation procedure.

Arthroscopic autologous chondrocyte implantation in the ankle joint.

PURPOSE: Autologous chondrocyte implantation (ACI) is an established procedure in the ankle providing satisfactory results. The development of a completely arthroscopic ACI procedure in the ankle joint made the technique easier and reduced the morbidity. The purpose of this investigation was to report the clinical results of a series of patients who underwent arthroscopic ACI of the talus at a mean of 7 ± 1.2-year follow-up. METHODS: Forty-six patients (mean age 31.4 ± 7.6) affected by osteochondral lesions of the talar dome (OLT) received arthroscopic ACI between 2001 and 2006. Patients were clinically evaluated using AOFAS score pre-operatively and at 12, 36 months and at final follow-up of 87.2 ± 14.5 months. RESULTS: The mean pre-operative AOFAS score was 57.2 ± 14.3. At the 12-month follow-up, the mean AOFAS score was 86.8 ± 13.4 (p = 0.0005); at 36 months after surgery, the mean score was 89.5 ± 13.4 (p = 0.0005); whereas at final follow-up of 87.2 ± 14.5 months it was 92.0 ± 11.2 (p = 0.0005). There were three failures. Histological and immunohistochemical evaluations of specimens harvested from failed implants generally showed several aspects of a fibro-cartilaginous tissue associated with some aspects of cartilage tissue remodelling as indicated by the presence of type II collagen expression. CONCLUSION: This study confirmed the ability of arthroscopic ACI to repair osteochondral lesions in the ankle joint with satisfactory clinical results after mid-term follow-up. LEVEL OF EVIDENCE: IV, retrospective case series.

A 3D Collagen-Based Bioprinted Model to Study Osteosarcoma Invasiveness and Drug Response.

The biological and therapeutic limits of traditional 2D culture models, which only partially mimic the complexity of cancer, have recently emerged. In this study, we used a 3D bioprinting platform to process a collagen-based hydrogel with embedded osteosarcoma (OS) cells. The human OS U-2 OS cell line and its resistant variant (U-2OS/CDDP 1 µg) were considered. The fabrication parameters were optimized to obtain 3D printed constructs with overall morphology and internal microarchitecture that accurately match the theoretical design, in a reproducible and stable process. The biocompatibility of the 3D bioprinting process and the chosen collagen bioink in supporting OS cell viability and metabolism was confirmed through multiple assays at short- (day 3) and long- (day 10) term follow-ups. In addition, we tested how the 3D collagen-based bioink affects the tumor cell invasive capabilities and chemosensitivity to cisplatin (CDDP). Overall, we developed a new 3D culture model of OS cells that is easy to set up, allows reproducible results, and better mirrors malignant features of OS than flat conditions, thus representing a promising tool for drug screening and OS cell biology research.

Cartilage Tissue Engineering by Extrusion Bioprinting: Process Analysis, Risk Evaluation, and Mitigation Strategies.

Extrusion bioprinting is considered promising in cartilage tissue engineering since it allows the fabrication of complex, customized, and living constructs potentially suitable for clinical applications. However, clinical translation is often complicated by the variability and unknown/unsolved issues related to this technology. The aim of this study was to perform a risk analysis on a research process, consisting in the bioprinting of a stem cell-laden collagen bioink to fabricate constructs with cartilage-like properties. The method utilized was the Failure Mode and Effect Analysis/Failure Mode and Effect Criticality Analysis (FMEA/FMECA) which foresees a mapping of the process to proactively identify related risks and the mitigation actions. This proactive risk analysis allowed the identification of forty-seven possible failure modes, deriving from seventy-one potential causes. Twenty-four failure modes displayed a high-risk level according to the selected evaluation criteria and threshold (RPN > 100). The results highlighted that the main process risks are a relatively low fidelity of the fabricated structures, unsuitable parameters/material properties, the death of encapsulated cells due to the shear stress generated along the nozzle by mechanical extrusion, and possible biological contamination phenomena. The main mitigation actions involved personnel training and the implementation of dedicated procedures, system calibration, printing conditions check, and, most importantly, a thorough knowledge of selected biomaterial and cell properties that could be built either through the provided data/scientific literature or their preliminary assessment through dedicated experimental optimization phase. To conclude, highlighting issues in the early research phase and putting in place all the required actions to mitigate risks will make easier to develop a standardized process to be quickly translated to clinical use.

A Roadmap of In Vitro Models in Osteoarthritis: A Focus on Their Biological Relevance in Regenerative Medicine.

Osteoarthritis (OA) is a multifaceted musculoskeletal disorder, with a high prevalence worldwide. Articular cartilage and synovial membrane are among the main biological targets in the OA microenvironment. Gaining more knowledge on the accuracy of preclinical in vitro OA models could open innovative avenues in regenerative medicine to bridge major gaps, especially in translation from animals to humans. Our methodological approach entailed searches on Scopus, the Web of Science Core Collection, and EMBASE databases to select the most relevant preclinical in vitro models for studying OA. Predicting the biological response of regenerative strategies requires developing relevant preclinical models able to mimic the OA milieu influencing tissue responses and organ complexity. In this light, standard 2D culture models lack critical properties beyond cell biology, while animal models suffer from several limitations due to species differences. In the literature, most of the in vitro models only recapitulate a tissue compartment, by providing fragmented results. Biotechnological advances may enable scientists to generate new in vitro models that combine easy manipulation and organ complexity. Here, we review the state-of-the-art of preclinical in vitro models in OA and outline how the different preclinical systems (inflammatory/biomechanical/microfluidic models) may be valid tools in regenerative medicine, describing their pros and cons. We then discuss the prospects of specific and combinatorial models to predict biological responses following regenerative approaches focusing on mesenchymal stromal cells (MSCs)-based therapies to reduce animal testing.

Modeling and Fabrication of Silk Fibroin-Gelatin-Based Constructs Using Extrusion-Based Three-Dimensional Bioprinting.

Robotic dispensing-based 3D bioprinting represents one of the most powerful technologies to develop hydrogel-based 3D constructs with enormous potential in the field of regenerative medicine. The optimization of hydrogel printing parameters, proper geometry and internal architecture of the constructs, and good cell viability during the bioprinting process are the essential requirements. In this paper, an analytical model based on the hydrogel rheological properties was developed to predict the extruded filament width in order to maximize the printed structure's fidelity to the design. Viscosity data of two natural hydrogels were imputed to a power-law model to extrapolate the filament width. Further, the model data were validated by monitoring the obtained filament width as the output. Shear stress values occurring during the bioprinting process were also estimated. Human mesenchymal stromal cells (hMSCs) were encapsulated in the silk fibroin-gelatin (G)-based hydrogel, and a 3D bioprinting process was performed to produce cell-laden constructs. Live and dead assay allowed estimating the impact of needle shear stress on cell viability after the bioprinting process. Finally, we tested the potential of hMSCs to undergo chondrogenic differentiation by evaluating the cartilaginous extracellular matrix production through immunohistochemical analyses. Overall, the use of the proposed analytical model enables defining the optimal printing parameters to maximize the fabricated constructs' fidelity to design parameters before the process execution, enabling to achieve more controlled and standardized products than classical trial-and-error approaches in the biofabrication of engineered constructs. Employing modeling systems exploiting the rheological properties of the hydrogels might be a valid tool in the future for guaranteeing high cell viability and for optimizing tissue engineering approaches in regenerative medicine applications.

Preclinical Evidence of Intra-Articular Autologous Cartilage Micrograft for Osteochondral Repair: Evaluation in a Rat Model.

OBJECTIVE: The search for an effective and long-lasting strategy to treat osteochondral defects (OCD) is a great challenge. Regenerative medicine launched a new era of research in orthopaedics for restoring normal tissue functions. The aim of this study was to test the healing potential of Rigenera micrografting technology in a rat model of OCD by investigating 2 cartilage donor sites. METHODS: Full-thickness OCD was bilaterally created in the knee joints of rats. Animals were randomly divided into 2 groups based on the anatomical site used for micrograft collection: articular (TO) and xiphoid (XA). Micrograft was injected into the knee via an intra-articular approach. The contralateral joint served as the control. Euthanasia was performed 2 months after the set-up of OCD. Histological evaluations foresaw hematoxylin/eosin and safranin-O/fast green staining, the modified O'Driscoll score, and collagen 1A1 and 2A1 immunostaining. Kruskal-Wallis and the post hoc Dunn test were performed to evaluate differences among groups. RESULTS: Histological results showed defect filling in both autologous micrografts. The TO group displayed tissue repair with more hyaline-like characteristics than its control (P < 0.01). A fibrocartilaginous aspect was instead noticed in the XA group. Immunohistochemical assessments on type 2A1 and type 1 collagens confirmed the best histological results in the TO group. CONCLUSIONS: TO and XA groups contributed to a different extent to fill the OCD lesions. TO group provided the best histological and immunohistochemical results; therefore, it could be a promising method to treat OCD after the validation in a larger animal model.

Multifunctional 3D-Printed Magnetic Polycaprolactone/Hydroxyapatite Scaffolds for Bone Tissue Engineering.

Multifunctional and resistant 3D structures represent a great promise and a great challenge in bone tissue engineering. This study addresses this problem by employing polycaprolactone (PCL)-based scaffolds added with hydroxyapatite (HAp) and superparamagnetic iron oxide nanoparticles (SPION), able to drive on demand the necessary cells and other bioagents for a high healing efficiency. PCL-HAp-SPION scaffolds with different concentrations of the superparamagnetic component were developed through the 3D-printing technology and the specific topographical features were detected by Atomic Force and Magnetic Force Microscopy (AFM-MFM). AFM-MFM measurements confirmed a homogenous distribution of HAp and SPION throughout the surface. The magnetically assisted seeding of cells in the scaffold resulted most efficient for the 1% SPION concentration, providing good cell entrapment and adhesion rates. Mesenchymal Stromal Cells (MSCs) seeded onto PCL-HAp-1% SPION showed a good cell proliferation and intrinsic osteogenic potential, indicating no toxic effects of the employed scaffold materials. The performed characterizations and the collected set of data point on the inherent osteogenic potential of the newly developed PCL-HAp-1% SPION scaffolds, endorsing them towards next steps of in vitro and in vivo studies and validations.

Bipolar fresh osteochondral allograft of the ankle.

BACKGROUND: Severe post-traumatic ankle arthritis poses a reconstructive challenge in the young and active patient. Bipolar fresh osteochondral allograft (BFOA) may represent an intriguing alternative to arthrodesis and prosthetic replacement. The aim of this study was to describe a lateral trans-malleolar technique for BFOA, and to evaluate the results in a case series. MATERIALS AND METHODS: From 2004 to 2006, 32 patients, mean age of 36.8 +/- 8.4 years, affected by ankle arthritis underwent BFOA with a mean followup of 31.2 months. The graft was prepared by specifically designed jigs, including the talus and the tibia with the medial malleolus. The host surfaces were prepared by the same jigs through a lateral approach. The graft was placed and fixed with twist-off screws. Patients were evaluated clinically and radiographically at 2, 4, and 6 month after operation, and at a minimum 24 months followup. A biopsy of the grafted areas was obtained from 7 patients at 1-year followup for histological and immunohistochemical examination. RESULTS: Preoperative AOFAS score was 33.1 +/- 10.9 and postoperatively 69.5 +/- 19.4 (p < 0.0005). Six failures occurred. Cartilage harvests showed hyaline-like histology with a normal collagen component but low proteoglycan presence and a disorganized structure. Samples were positive for MMP-1, MMP-13 and Capsase-3. CONCLUSION: The use of BFOA represents an intriguing alternative to arthrodesis or arthroplasty. We believe precise allograft sizing, stable fitting and fixation and delayed weightbearing were key factors for a successful outcome. Further research regarding the immunological behavior of transplanted cartilage is needed.

Articular Cartilage Regeneration in Osteoarthritis.

There has been considerable advancement over the last few years in the treatment of osteoarthritis, common chronic disease and a major cause of disability in older adults. In this pathology, the entire joint is involved and the regeneration of articular cartilage still remains one of the main challenges, particularly in an actively inflammatory environment. The recent strategies for osteoarthritis treatment are based on the use of different therapeutic solutions such as cell and gene therapies and tissue engineering. In this review, we provide an overview of current regenerative strategies highlighting the pros and cons, challenges and opportunities, and we try to identify areas where future work should be focused in order to advance this field.

Investigating the Role of Sustained Calcium Release in Silk-Gelatin-Based Three-Dimensional Bioprinted Constructs for Enhancing the Osteogenic Differentiation of Human Bone Marrow Derived Mesenchymal Stromal Cells.

Scaffold-based bone tissue engineering strategies fail to meet the clinical need to fabricate patient-specific and defect shape-specific, anatomically relevant load-bearing bone constructs. 3D bioprinting strategies are gaining major interest as a potential alternative, but design of a specific bioink is still a major challenge that can modulate key signaling pathways to induce osteogenic differentiation of progenitor cells, as well as offer appropriate microenvironment to augment mineralization. In the present study, we developed silk fibroin protein and gelatin-based conjugated bioink, which showed localized presence and sustained release of calcium. Presence of 2.6 mM Ca2+ ions within the bioink could further induce enhanced osteogenesis of Bone marrow derived progenitor cells (hMSCs) compared to the bioink without calcium, or same concentration of calcium added to the media, as evidenced by upregulated gene expression of osteogenic markers. This study generated unprecedented mechanistic insights on the role of fibroin-gelatin-CaCl2 bioink in modulating expression of several proteins which are known to play crucial role in bone regeneration as well as key signaling pathways such as ß-catenin, BMP signaling pathway, Parathyroid hormone-dependent signaling pathway, Forkhead box O (FOXO) pathway, and Hippo pathways in hMSC-laden bioprinted constructs.

Three-Dimensional Bioprinting of Cartilage by the Use of Stem Cells: A Strategy to Improve Regeneration.

Cartilage lesions fail to heal spontaneously, leading to the development of chronic conditions which worsen the life quality of patients. Three-dimensional scaffold-based bioprinting holds the potential of tissue regeneration through the creation of organized, living constructs via a "layer-by-layer" deposition of small units of biomaterials and cells. This technique displays important advantages to mimic natural cartilage over traditional methods by allowing a fine control of cell distribution, and the modulation of mechanical and chemical properties. This opens up a number of new perspectives including personalized medicine through the development of complex structures (the osteochondral compartment), different types of cartilage (hyaline, fibrous), and constructs according to a specific patient's needs. However, the choice of the ideal combination of biomaterials and cells for cartilage bioprinting is still a challenge. Stem cells may improve material mimicry ability thanks to their unique properties: the immune-privileged status and the paracrine activity. Here, we review the recent advances in cartilage three-dimensional, scaffold-based bioprinting using stem cells and identify future developments for clinical translation. Database search terms used to write this review were: "articular cartilage", "menisci", "3D bioprinting", "bioinks", "stem cells", and "cartilage tissue engineering".

Short-Term Homing of Hyaluronan-Primed Cells: Therapeutic Implications for Osteoarthritis Treatment.

The evaluation of key factors modulating cell homing following injection can provide new insights in the comprehension of unsolved biological questions about the use of cell therapies for osteoarthritis (OA). The main purpose of this in vivo study was to investigate the biodistribution of an intra-articular injection of mesenchymal stromal cells (MSCs) and bone marrow concentrate (BMC) in a rabbit OA model and whether the additional use of sodium hyaluronate (HA) could modulate their migration and delay joint degeneration. OA was surgically induced in adult male New Zealand rabbits. A group of animals was used to test the biodistribution of labeled cells alone or with HA at 7 and 14 days to investigate cell migration. The efficacy of treatments was evaluated in other experimental groups at 2 months. Histology and immunohistochemistry for markers identifying anabolic and catabolic processes in the cartilage and meniscus, or macrophage subset population in the synovial membrane, were performed. Kruskal-Wallis test, followed by post hoc Dunn's test, and Spearman's rank-order correlation method were used. MSCs and BMC preferentially migrate toward tissue areas showing OA features in the meniscus and cartilage and in detail near inflammatory zones in the synovial membrane. The combination with HA contributed to boost cell migration toward articular cartilage. In general, both labeled cells combined with HA were found near cell cluster and fissures in the cartilage and meniscus, respectively, and close to areas of synovial membrane showing mainly anti-inflammatory macrophages. A promotion of joint repair was observed at different levels for all treatments, although BMC-HA treatment resulted as the best strategy to support joint repair. This last, displayed a good protein expression of type II collagen in the cartilage, as well as the presence of anti-inflammatory macrophages in the synovial membrane at 2 months from the treatment. Studies tracking cell biodistribution indicate that priming progenitor cells with HA modulated cell homing favoring not only attachment but also their integration within articular cartilage.