Bioinspired magnetite formation from a disordered ferrihydrite-derived precursor.

We show that by reacting ferrihydrite (FeH) with Fe((II)) ions and subsequently increasing the pH, magnetite is formed through a multi-step nucleation process mediated by monodisperse FeH-Fe((II)) primary particles. The interaction of these primary particles with a transient green rust phase leads to the formation of smaller secondary particles which form the feedstock for magnetite formation. Surprisingly, the presence of a polypeptide additive prevents the formation of green rust as an Fe((II))-rich intermediate phase, and leads to the formation of amorphous aggregates of FeH-Fe((II)) particles which subsequently transform into the final magnetite nanocrystals. The observation of multiple transitions and the involvement of disordered precursor phases in this bioinspired crystallization route is important for our understanding of the nucleation of magnetite in geological and biological environments, and may lead to new approaches in the sustainable synthesis of this technologically important mineral.

Nucleation and growth of magnetite from solution.

The formation of crystalline materials from solution is usually described by the nucleation and growth theory, where atoms or molecules are assumed to assemble directly from solution. For numerous systems, the formation of the thermodynamically stable crystalline phase is additionally preceded by metastable intermediates . More complex pathways have recently been proposed, such as aggregational processes of nanoparticle precursors or pre-nucleation clusters, which seem to contradict the classical theory. Here we show by cryogenic transmission electron microscopy that the nucleation and growth of magnetite-a magnetic iron oxide with numerous bio- and nanotechnological applications-proceed through rapid agglomeration of nanometric primary particles and that in contrast to the nucleation of other minerals, no intermediate amorphous bulk precursor phase is involved. We also demonstrate that these observations can be described within the framework of classical nucleation theory.

High-magnesian calcite mesocrystals: a coordination chemistry approach.

While biogenic calcites frequently contain appreciable levels of magnesium, the pathways leading to such high concentrations remain unclear. The production of high-magnesian calcites in vitro is highly challenging, because Mg-free aragonite, rather than calcite, is the favored product in the presence of strongly hydrated Mg(2+) ions. While nature may overcome this problem by forming a Mg-rich amorphous precursor, which directly transforms to calcite without dissolution, high Mg(2+)/Ca(2+) ratios are required synthetically to precipitate high-magnesian calcite from solution. Indeed, it is difficult to synthesize amorphous calcium carbonate (ACC) containing high levels of Mg, and the Mg is typically not preserved in the calcite product as the transformation occurs via a dissolution-reprecipitation route. We here present a novel synthetic method, which employs a strategy based on biogenic systems, to generate high-magnesian calcite. Mg-containing ACC is produced in a nonaqueous environment by reacting a mixture of Ca and Mg coordination complexes with CO(2). Control over the Mg incorporation is simply obtained by the ratio of the starting materials. Subsequent crystallization at reduced water activities in an organic solvent/water mixture precludes dissolution and reprecipitation and yields high-magnesian calcite mesocrystals with Mg contents as high as 53 mol %. This is in direct contrast with the polycrystalline materials generally observed when magnesian calcite is formed synthetically. Our findings give insight into the possible mechanisms of formation of biogenic high-magnesian calcites and indicate that precise control over the water activity may be a key element.

The role of prenucleation clusters in surface-induced calcium phosphate crystallization.

Unravelling the processes of calcium phosphate formation is important in our understanding of both bone and tooth formation, and also of pathological mineralization, for example in cardiovascular disease. Serum is a metastable solution from which calcium phosphate precipitates in the presence of calcifiable templates such as collagen, elastin and cell debris. A pathological deficiency of inhibitors leads to the uncontrolled deposition of calcium phosphate. In bone and teeth the formation of apatite crystals is preceded by an amorphous calcium phosphate (ACP) precursor phase. ACP formation is thought to proceed through prenucleation clusters--stable clusters that are present in solution already before nucleation--as was recently demonstrated for CaCO(3) (refs 15,16). However, the role of such nanometre-sized clusters as building blocks for ACP has been debated for many years. Here we demonstrate that the surface-induced formation of apatite from simulated body fluid starts with the aggregation of prenucleation clusters leading to the nucleation of ACP before the development of oriented apatite crystals.

In situ techniques in biomimetic mineralization studies of calcium carbonate.

The often astonishing material properties of crystalline biominerals are generally related to the hierarchical assembly of specifically interacting organic and inorganic components. To synthesize new materials with similar advanced properties applying nature's biomimeralization strategies we need to unravel the mechanisms of biologically and biomimetically controlled mineral formation. Since the literature is extensive this tutorial review is focussed on CaCO(3), the most abundant biomineral. We will first review the different approaches to biomimetic mineralization and describe the most recent advancements in the field. Subsequently the importance of in situ and time-resolved experiments, with their possibilities and limitations, is discussed with selected references.

The development of morphology and structure in hexagonal vaterite.

Inspired by the remarkable shapes and properties of CaCO(3) biominerals, many studies have investigated biomimetic routes aiming at synthetic equivalents with similar morphological and structural complexity. Control over the morphology of CaCO(3) crystals has been demonstrated, among other methods, by the use of additives that selectively allow the development of specific crystal faces, while inhibiting others. Both for biogenic and biomimetic CaCO(3), the crystalline state is often preceded by an amorphous precursor phase, but still limited information is available on the details of the amorphous-to-crystalline transition. By using a combination of cryoTEM techniques (bright field imaging, cryo-tomography, low dose electron diffraction and cryo-darkfield imaging), we show for the first time the details of this transition during the formation of hexagonal vaterite crystals grown in the presence of NH(4)(+) ions. The formation of hexagonal plate-like vaterite occurs via an amorphous precursor phase. This amorphous phase converts into the crystalline state through a solid state transformation in which order and morphology develop simultaneously. The mineral initially develops as polycrystalline vaterite which transforms into a single crystal directed by an NH(4)(+)-induced crystal plane that acts as a templating surface.

Correlation between molecular dipole moment and centrosymmetry in some crystalline diphenyl ethers.

The presence of a large molecular dipole moment in diphenyl ethers leads unequivocally to a centrosymmetric crystal structure.

Crystal engineering in the aminophenols. Novel carborundum network in a supramolecular homologous series.

Molecular complexes of 4-(4-aminophenoxy)aniline with a series of diphenols are structurally homologous and adopt the carborundum III topology, which is an unprecedented network for organic solids.

Hydrogen and halogen bonding drive the orthogonal self-assembly of an organic framework possessing 2D channels.

Orthogonal self-assembly of an open organic framework showing 2D channels has been obtained by combining hydrogen and halogen bonding. The framework is able to host various guest molecules with a diverse set of steric demands and substitution patterns, and survives single-crystal-to-single-crystal guest exchanges from liquid and gas phases.

Crystal structure prediction of aminols: advantages of a supramolecular synthon approach with experimental structures.

The supramolecular synthon approach to crystal structure prediction (CSP) takes into account the complexities inherent in crystallization. The synthon is a kinetically favored unit, and through analysis of commonly occurring synthons in a group of related compounds, kinetic factors are implicitly invoked. The working assumption is that while the experimental structure need not be at the global minimum, it will appear somewhere in a list of computationally generated structures so that it can be suitably identified and ranked upward using synthon information. These ideas are illustrated with a set of aminophenols, or aminols. In the first stage, a training database is created of the 10 isomeric methylaminophenols. The crystal structures of these compounds were determined. The prototypes 2-, 3-, and 4-aminophenols were also included in the training database. Small and large synthons in these 13 crystal structures were then identified. Small synthons are of high topological but low geometrical value and are used in negative screens to eliminate computationally derived structures that are chemically unreasonable. Large synthons are more restrictive geometrically and are used in positive screens ranking upward predicted structures that contain these more well-defined patterns. In the second stage, these screens are applied to CSP of nine new aminols carried out in 14 space groups. In each space group, up to 10 lowest energy structures were analyzed with respect to their synthon content. The results are encouraging, and the predictions were classified as good, unclear, or bad. Two predictions were verified with actual crystal structure determinations.

Correspondence between molecular functionality and crystal structures. Supramolecular chemistry of a family of homologated aminophenols.

The crystal structures and packing features of a family of 13 aminophenols, or supraminols, are analyzed and correlated. These compounds are divided into three groups: (a) compounds 1-5 with methylene spacers of the general type HO-C6H4-(CH2)n-C6H4-NH2 (n = 1 to 5) and both OH and NH2 in a para position; (b) compounds 1a, 2a, 2b, 2c, and 3a in which one or more of the methylene linkers in 1 to 3 are exchanged with an S-atom; and (c) compounds 2d, 1b, and 6a prepared with considerations of crystal engineering and where the crystal structures may be anticipated on the basis of structures 1-5,1a, 2a, 2b, 2c, and 3a. These 13 aminols can be described in terms of three major supramolecular synthons based on hydrogen bonding between OH and NH2 groups: the tetrameric loop or square motif, the infinite N(H)O chain, and the beta-As sheet. These three synthons are not completely independent of each other but interrelate, with the structures tending toward the more stable beta-As sheet in some cases. Compounds 1-5 show an alternation in melting points, and compounds with n = even exhibit systematically higher melting points compared to those with n = odd. The alternating melting points are reflected in, and explained by, the alternation in the crystal structures. The n = odd structures tend toward the beta-As sheet as n increases and can be considered as a variable series whereas for n = even, the beta-As sheet is invariably formed constituting a fixed series. Substitution of a methylene group by an isosteric S-atom may causes a change in the crystal structure. These observations are rationalized in terms of geometrical and chemical effects of the functional groups. This study shows that even for compounds with complex crystal structures the packing may be reasonably anticipated provided a sufficient number of examples are available.