Aligned macrocycle pores in ultrathin films for accurate molecular sieving.

Polymer membranes are widely used in separation processes including desalination1, organic solvent nanofiltration2,3 and crude oil fractionation4,5. Nevertheless, direct evidence of subnanometre pores and a feasible method of manipulating their size is still challenging because of the molecular fluctuations of poorly defined voids in polymers6. Macrocycles with intrinsic cavities could potentially tackle this challenge. However, unfunctionalized macrocycles with indistinguishable reactivities tend towards disordered packing in films hundreds of nanometres thick7-9, hindering cavity interconnection and formation of through-pores. Here, we synthesized selectively functionalized macrocycles with differentiated reactivities that preferentially aligned to create well-defined pores across an ultrathin nanofilm. The ordered structure was enhanced by reducing the nanofilm thickness down to several nanometres. This orientated architecture enabled direct visualization of subnanometre macrocycle pores in the nanofilm surfaces, with the size tailored to ångström precision by varying the macrocycle identity. Aligned macrocycle membranes provided twice the methanol permeance and higher selectivity compared to disordered counterparts. Used in high-value separations, exemplified here by enriching cannabidiol oil, they achieved one order of magnitude faster ethanol transport and threefold higher enrichment than commercial state-of-the-art membranes. This approach offers a feasible strategy for creating subnanometre channels in polymer membranes, and demonstrates their potential for accurate molecular separations.

Low-Temperature Mineralization of Fluorotelomers with Diverse Polar Head Groups.

Per- and polyfluoroalkyl substances (PFAS) are persistent environmental pollutants linked to harmful health effects. Currently employed PFAS destruction methods are energy-intensive and often produce shorter-chain and recalcitrant partially fluorinated byproducts. We report the mineralization of five fluorotelomer compounds via a base-mediated degradation using NaOH and mild temperatures (120 °C) in a mixture of DMSO:H2O (8:1 v/v). The studied fluorotelomers have varying polar head groups-carboxylic acids, sulfonic acids, alcohols, and phosphonic acids, which are the most common polar head groups used in commercial and industrial applications. The degradation intermediates and byproducts were characterized using 1H, 13C, and 19F NMR spectroscopy. Density functional theory computations at the M06-2X/6-311 + G(2d,p)-SMD-(DMSO) level were consistent with the observed intermediates and guided an overall mechanistic hypothesis. Degradation of each fluorotelomer occurs through a similar process, in which the nonfluorinated carbons and the first fluorinated carbon are cleaved from the remaining perfluoroalkyl fragment, which degrades through previously identified pathways. These findings provide important insight into PFAS degradation processes and suggest that PFAS containing at least one C-H bond within or adjacent to its fluoroalkyl chain can be degraded under these mild conditions. Many PFAS in current use as well as recalcitrant fluorinated byproducts generated from other PFAS degradation methods are candidates for this approach.

Nonclassical Crystallization Processes of Single-Crystalline Two-Dimensional Covalent Organic Frameworks.

Controlling the two-dimensional polymerization processes of two-dimensional covalent organic frameworks (2D COFs) is essential to fully realizing their distinct properties. Although most 2D COFs have been isolated as polycrystalline aggregates with only nanometer-scale crystalline domains, we have identified rapid, solvothermal conditions that provide micrometer-scale and larger single-crystal 2D polymers for a few 2D COFs. Yet it remains unclear why certain conditions produce far larger 2D polymers than others, which hinders generalizing these findings. The guiding principles for controlled two-dimensional polymerization in solution remain unclear. Here, we study the crystallization processes of both single-crystalline and polycrystalline 2D COFs using ultrasmall-angle X-ray scattering (USAXS) for the first time, through which we characterized COF formation conditions with scattering data collected every few seconds. In situ USAXS experiments revealed distinct growth mechanisms between single-crystalline and polycrystalline COFs and suggested a nonclassical particle fusion-based growth model for single-crystalline COFs that results in faceted, hexagonal particles. These findings were corroborated by in situ wide-angle X-ray scattering (WAXS) experiments and scanning electron microscopy (SEM). In contrast, polymerizations that provide polycrystalline COFs evolve as spherical aggregates that do not fuse in the same way. These insights into how micrometer-sized, crystalline 2D polymers are formed in solution point a way forward to establishing a robust connection between the 2D polymer structure and designed properties by controlling their polymerization processes.

Two-Dimensional Polymers and Polymerizations.

Synthetic chemists have developed robust methods to synthesize discrete molecules, linear and branched polymers, and disordered cross-linked networks. However, two-dimensional polymers (2DPs) prepared from designed monomers have been long missing from these capabilities, both as objects of chemical synthesis and in nature. Recently, new polymerization strategies and characterization methods have enabled the unambiguous realization of covalently linked macromolecular sheets. Here we review 2DPs and 2D polymerization methods. Three predominant 2D polymerization strategies have emerged to date, which produce 2DPs either as monolayers or multilayer assemblies. We discuss the fundamental understanding and scope of each of these approaches, including: the bond-forming reactions used, the synthetic diversity of 2DPs prepared, their multilayer stacking behaviors, nanoscale and mesoscale structures, and macroscale morphologies. Additionally, we describe the analytical tools currently available to characterize 2DPs in their various isolated forms. Finally, we review emergent 2DP properties and the potential applications of planar macromolecules. Throughout, we highlight achievements in 2D polymerization and identify opportunities for continued study.

Defining the Macromolecules of Tomorrow through Synergistic Sustainable Polymer Research.

Transforming how plastics are made, unmade, and remade through innovative research and diverse partnerships that together foster environmental stewardship is critically important to a sustainable future. Designing, preparing, and implementing polymers derived from renewable resources for a wide range of advanced applications that promote future economic development, energy efficiency, and environmental sustainability are all central to these efforts. In this Chemical Reviews contribution, we take a comprehensive, integrated approach to summarize important and impactful contributions to this broad research arena. The Review highlights signature accomplishments across a broad research portfolio and is organized into four wide-ranging research themes that address the topic in a comprehensive manner: Feedstocks, Polymerization Processes and Techniques, Intended Use, and End of Use. We emphasize those successes that benefitted from collaborative engagements across disciplinary lines.

Crystalline Arrays of Copper Porphyrin Qubits Based on Ion-Paired Frameworks.

Molecular electronic spin qubits have great potential for use in quantum information science applications because their structure can be rationally tuned using synthetic chemistry. Their integration into a new class of materials, ion-paired frameworks, allows for the formation of ordered arrays of these molecular spin qubits. Three ion-paired frameworks with varying densities of paramagnetic Cu(II) porphyrins were isolated as micron-sized crystals suitable for characterization by single-crystal X-ray diffraction. Pulse-electron paramagnetic resonance (EPR) spectroscopy probed the spin coherence of these materials at temperatures up to 140 K. The crystals with the longest Cu-Cu distances had a spin-spin relaxation time (Tm) of 207 ns and a spin-lattice relaxation time (T1) of 1.8 ms at 5 K, which decreased at elevated temperature because of spin-phonon coupling. Crystals with shorter Cu-Cu distances also had lower T1 values because of enhanced cross-relaxation from qubit-qubit dipolar coupling. Frameworks with shorter Cu-Cu distances exhibited lower Tm values because of the increased interactions between qubits within the frameworks. Incorporating molecular electronic spin qubits in ion-paired frameworks enables control of composition, spacing, and interqubit interactions, providing a rational means to extend spin relaxation times.

Tuning Crystallinity and Stacking of Two-Dimensional Covalent Organic Frameworks through Side-Chain Interactions.

Two-dimensional covalent organic frameworks (2D COFs) form as layered 2D polymers whose sheets stack through high-surface-area, noncovalent interactions that can give rise to different interlayer arrangements. Manipulating the stacking of 2D COFs is crucial since it dictates the effective size and shape of the pores as well as the specific interactions between functional aromatic systems in adjacent layers, both of which will strongly influence the emergent properties of 2D COFs. However, principles for tuning layer stacking are not yet well understood, and many 2D COFs are disordered in the stacking direction. Here, we investigate effects of pendant chain length through a series of 2D imine-linked COFs functionalized with n-alkyloxy chains varying in length from one carbon (C1 COF) to 11 carbons (C11 COF). This series reveals previously unrecognized and unanticipated trends in both the stacking geometry and crystallinity. C1 COF adopts an averaged eclipsed geometry with no apparent offset between layers. In contrast, all subsequent chain lengths lead to some degree of unidirectional slip stacking. As pendant chain length is increased, trends show average layer offset increasing to a maximum of 2.07 Å in C5 COF and then decreasing as chain length is extended through C11 COF. Counterintuitively, shorter chains (C2-C4) give rise to lower yields of weakly crystalline materials, while longer chains (C6-C9) produce greater yields of highly crystalline materials, as confirmed by powder X-ray diffraction and scanning electron microscopy. Molecular dynamics simulations corroborate these observations, suggesting that long alkyl chains can interact favorably to promote the self-assembly of sheets. In situ proton NMR spectroscopy provides insights into the reaction equilibrium as well as the relationship between low COF yields and low crystallinity. These results provide fundamental insights into principles of supramolecular assembly in 2D COFs, demonstrating an opportunity for harnessing favorable side-chain interactions to produce highly crystalline materials.

Synthesis, Hole Doping, and Electrical Properties of a Semiconducting Azatriangulene-Based Covalent Organic Framework.

Two-dimensional covalent organic frameworks (2D COFs) containing heterotriangulenes have been theoretically identified as semiconductors with tunable, Dirac-cone-like band structures, which are expected to afford high charge-carrier mobilities ideal for next-generation flexible electronics. However, few bulk syntheses of these materials have been reported, and existing synthetic methods provide limited control of network purity and morphology. Here, we report transimination reactions between benzophenone-imine-protected azatriangulenes (OTPA) and benzodithiophene dialdehydes (BDT), which afforded a new semiconducting COF network, OTPA-BDT. The COFs were prepared as both polycrystalline powders and thin films with controlled crystallite orientation. The azatriangulene nodes are readily oxidized to stable radical cations upon exposure to an appropriate p-type dopant, tris(4-bromophenyl)ammoniumyl hexachloroantimonate, after which the network's crystallinity and orientation are maintained. Oriented, hole-doped OTPA-BDT COF films exhibit electrical conductivities of up to 1.2 × 10-1 S cm-1, which are among the highest reported for imine-linked 2D COFs to date.

Electronic Spin Qubit Candidates Arrayed within Layered Two-Dimensional Polymers.

Molecular electronic spin qubits are promising candidates for quantum information science applications because they can be reliably produced and engineered via chemical design. Embedding electronic spin qubits within two-dimensional polymers (2DPs) offers the possibility to systematically engineer inter-qubit interactions while maintaining long coherence times, both of which are prerequisites to their technological utility. Here, we introduce electronic spin qubits into a diamagnetic 2DP by n-doping naphthalene diimide subunits with varying amounts of CoCp2 and analyze their spin densities by quantitative electronic paramagnetic resonance spectroscopy. Low spin densities (e.g., 6.0 × 1012 spins mm-3) enable lengthy spin-lattice (T1) and spin-spin relaxation (T2) times across a range of temperatures, ranging from T1 values of 164 ms at 10 K to 30.2 µs at 296 K and T2 values of 2.36 µs at 10 K to 0.49 µs at 296 K for the lowest spin density sample examined. Higher spin densities and temperatures were both found to diminish T1 times, which we attribute to detrimental cross-relaxation from spin-spin dipolar interactions and spin-phonon coupling, respectively. Higher spin densities decreased T2 times and modulated the T2 temperature dependence. We attribute these differences to the competition between hyperfine and dipolar interactions for electron spin decoherence, with the dominant interaction transitioning from the former to the latter as spin density and temperature increase. Overall, this investigation demonstrates that dispersing electronic spin qubits within layered 2DPs enables chemical control of their inter-qubit interactions and spin decoherence times.

Trace Organic Contaminant Removal from Municipal Wastewater by Styrenic ß-Cyclodextrin Polymers.

Trace organic contaminants (TrOCs) present major removal challenges for wastewater treatment. TrOCs, such as perfluoroalkyl and polyfluoroalkyl substances (PFAS), are associated with chronic toxicity at ng L-1 exposure levels and should be removed from wastewater to enable safe reuse and release of treated effluents. Established adsorbents, such as granular activated carbon (GAC), exhibit variable TrOC removal and fouling by wastewater constituents. These shortcomings motivate the development of selective novel adsorbents that also maintain robust performance in wastewater. Cross-linked ß-cyclodextrin (ß-CD) polymers are promising adsorbents with demonstrated TrOC removal efficacy. Here, we report a simplified and potentially scalable synthesis of a porous polymer composed of styrene-linked ß-CD and cationic ammonium groups. Batch adsorption experiments demonstrate that the polymer is a selective adsorbent exhibiting complete removal for six out of 13 contaminants with less adsorption inhibition than GAC in wastewater. The polymer also exhibits faster adsorption kinetics than GAC and ion exchange (IX) resin, higher adsorption affinity for PFAS than GAC, and is regenerable by solvent wash. Rapid small-scale column tests show that the polymer exhibits later breakthrough times compared to GAC and IX resin. These results demonstrate the potential for ß-CD polymers to remediate TrOCs from complex water matrices.

Single-Crystalline Imine-Linked Two-Dimensional Covalent Organic Frameworks Separate Benzene and Cyclohexane Efficiently.

Two-dimensional (2D) covalent organic frameworks (COFs) are composed of structurally precise, permanently porous, layered macromolecular sheets, which are traditionally synthesized as polycrystalline solids with crystalline domain lengths smaller than 100 nm. Here, we polymerize imine-linked 2D COFs as suspensions of faceted single crystals in as little as 5 min at moderate temperature and ambient pressure. Single crystals of two imine-linked 2D COFs were prepared, consisting of a rhombic 2D COF (TAPPy-PDA) and a hexagonal 2D COF (TAPB-DMPDA). The sizes of TAPPy-PDA and TAPB-DMPDA crystals were tuned from 720 nm to 4 µm and 450 nm to 20 µm in width, respectively. High-resolution transmission electron microscopy revealed that the COF crystals consist of layered, 2D polymers comprising single-crystalline domains. Continuous rotation electron diffraction resolved the unit cell and crystal structure of both COFs, which are single-crystalline in the a-b plane but disordered in the stacking c dimension. Single crystals of both COFs were incorporated into gas chromatography separation columns and exhibited unusual selective retention of cyclohexane over benzene, with single-crystalline TAPPy-PDA significantly outperforming single-crystalline TAPB-DMPDA. Polycrystalline TAPPy-PDA exhibited no separation, while polycrystalline TAPB-DMPDA exhibited poor separation and the opposite order of elution, retaining benzene more than cyclohexane, indicating the importance of improved material quality for COFs to exhibit properties that derive from their precise, crystalline structures. This work represents the first example of synthesizing imine-linked 2D COF single crystals at ambient pressure and short reaction times and demonstrates the promise of high-quality COFs for molecular separations.

Thermally conductive ultra-low-k dielectric layers based on two-dimensional covalent organic frameworks.

As the features of microprocessors are miniaturized, low-dielectric-constant (low-k) materials are necessary to limit electronic crosstalk, charge build-up, and signal propagation delay. However, all known low-k dielectrics exhibit low thermal conductivities, which complicate heat dissipation in high-power-density chips. Two-dimensional (2D) covalent organic frameworks (COFs) combine immense permanent porosities, which lead to low dielectric permittivities, and periodic layered structures, which grant relatively high thermal conductivities. However, conventional synthetic routes produce 2D COFs that are unsuitable for the evaluation of these properties and integration into devices. Here, we report the fabrication of high-quality COF thin films, which enable thermoreflectance and impedance spectroscopy measurements. These measurements reveal that 2D COFs have high thermal conductivities (1 W m-1 K-1) with ultra-low dielectric permittivities (k = 1.6). These results show that oriented, layered 2D polymers are promising next-generation dielectric layers and that these molecularly precise materials offer tunable combinations of useful properties.

Divergent Synthesis of Alternant Bisanthenequinone and Nonalternant Heptalenodifluorenedione Ring Systems via a Concentration-Dependent Rearrangement.

The synthesis of a diol containing a nonalternant aromatic core was investigated to access a nonalternant isomer of bisanthene with functional groups suitable for two-dimensional polymerization. An alternant diol and its nonalternant isomer were prepared in a short synthetic route from the same bifluorenylidene starting material. The bifluorenylidene reactant undergoes a Stone-Wales rearrangement in neat triflic acid, which unexpectedly provided both an alternant and nonalternant dione. The rearrangement was characterized by spectroscopy and single crystal X-ray diffraction of Grignard addition products of both isomers. The relative yield of the rearranged, alternant product increased along with the initial concentration of its polycyclic aromatic hydrocarbon (PAH) precursor, implicating a bimolecular rearrangement mechanism and enabling the divergent synthesis of both the nonalternant and alternant products. These findings offer convenient access to functional derivatives of two PAH classes of interest for their optoelectronic properties and serve as yet another warning about the importance of characterizing these materials with care, especially when insoluble products must be carried forward in a multistep synthetic route.

Rapid removal of organic micropollutants from water by a porous ß-cyclodextrin polymer.

The global occurrence in water resources of organic micropollutants, such as pesticides and pharmaceuticals, has raised concerns about potential negative effects on aquatic ecosystems and human health. Activated carbons are the most widespread adsorbent materials used to remove organic pollutants from water but they have several deficiencies, including slow pollutant uptake (of the order of hours) and poor removal of many relatively hydrophilic micropollutants. Furthermore, regenerating spent activated carbon is energy intensive (requiring heating to 500-900 degrees Celsius) and does not fully restore performance. Insoluble polymers of ß-cyclodextrin, an inexpensive, sustainably produced macrocycle of glucose, are likewise of interest for removing micropollutants from water by means of adsorption. ß-cyclodextrin is known to encapsulate pollutants to form well-defined host-guest complexes, but until now cross-linked ß-cyclodextrin polymers have had low surface areas and poor removal performance compared to conventional activated carbons. Here we crosslink ß-cyclodextrin with rigid aromatic groups, providing a high-surface-area, mesoporous polymer of ß-cyclodextrin. It rapidly sequesters a variety of organic micropollutants with adsorption rate constants 15 to 200 times greater than those of activated carbons and non-porous ß-cyclodextrin adsorbent materials. In addition, the polymer can be regenerated several times using a mild washing procedure with no loss in performance. Finally, the polymer outperformed a leading activated carbon for the rapid removal of a complex mixture of organic micropollutants at environmentally relevant concentrations. These findings demonstrate the promise of porous cyclodextrin-based polymers for rapid, flow-through water treatment.

Anisotropic Transient Disordering of Colloidal, Two-Dimensional CdSe Nanoplatelets upon Optical Excitation.

Nanoplatelets (NPLs)-colloidally synthesized, spatially anisotropic, two-dimensional semiconductor quantum wells-are of intense interest owing to exceptionally narrow transition line widths, coupled with solution processability and bandgap tunability. However, given large surface areas and undercoordinated bonding at facet corners and edges, excitation under sufficient intensities may induce anisotropic structural instabilities that impact desired properties. We employ time-resolved X-ray diffraction to study the crystal structure of CdSe NPLs in response to optical excitation. Photoexcitation induces greater out-of-plane than in-plane disordering in 4 and 5 monolayer (ML) NPLs, while 3 ML NPLs display the opposite behavior. Recovery dynamics suggest that out-of-plane cooling slightly outpaces in-plane cooling in 5 ML NPLs with recrystallization occurring on indistinguishable time scales. In comparison, for zero-dimensional CdSe nanocrystals, disordering is isotropic and recovery is faster. These results favor the use of NPLs in optoelectronic applications, where they are likely to exhibit superior performance over traditional, zero-dimensional nanocrystals.

Polycrystalline Covalent Organic Framework Films Act as Adsorbents, Not Membranes.

Covalent organic framework (COF) membranes are of great promise for energy-efficient separations. Thick, polycrystalline COF films have been reported to separate dyes, salts, bacteria, and nanoparticles on the basis of size-selective transport through ordered pores. Here, we show that these materials function as adsorbents, not as size-sieving membranes. Binding isotherms of several dyes typical of the COF membrane literature to three COF powder samples illustrate that COFs are high-capacity adsorbents with affinities that span a range of 3 orders of magnitude, trends which map onto previously reported separation behavior. Computational results suggest that observed differences in adsorption can be correlated to variable entropic gains driving the adsorption process. Polycrystalline COF pellets show volume-dependent and flow-rate dependent "rejection" of dyes, consistent with an adsorption-based removal mechanism. Previous reports of thick, polycrystalline COF membranes used low flow rates and small dye volumes to probe rejection capabilities, where membrane and adsorbent behavior is not distinguishable. A mixed dye separation experiment in flow shows affinity-dependent performance. These results necessitate a careful reexamination of the COF membrane literature, as separations based on differential transport through 2D COF pores remain an important yet unrealized frontier.

Two-Dimensional Covalent Organic Framework Solid Solutions.

Covalent organic frameworks (COFs) generally leverage one or two monomers with specific sizes and shapes to access highly symmetric and periodic polymer networks. Almost all reported COFs employ the minimum sets of monomers needed for the polymerization (usually two, sometimes one) and crystallize in high-symmetry topologies. COFs synthesized from more than two monomers usually employ mixtures with different pendant functionalities to distribute these groups statistically throughout the structure, or monomers with different sizes in ratios targeting lower symmetry topologies. Here, we demonstrate that mixtures of monomers with different lengths generate single-phase, hexagonal two-dimensional covalent organic framework (2D COF) solid solutions at continuously variable feed ratios. X-ray diffraction measurements, Fourier-transform infrared spectroscopy, and Pawley refinement indicate that both monomers distribute randomly within the same lattice, and the lattice parameters continuously increase as more of the larger linker is incorporated. Furthermore, COF solid solutions are accessed directly by polymerizing a mixture of monomers but not via linker exchange from a preformed COF. As strain develops from the lattice accommodating monomers with different sizes, the nonlinear relationship between the monomer incorporation and the COF's lattice parameters suggests that bond-bending of the monomers plays a role in incorporating monomers of different lengths into the solid solutions. Solid solution formation represents a new strategy to design 2D COFs and increase their complexity. Specifically, varying the monomer composition of a given network enables many properties, such as the average pore size, to be continuously tuned between those of corresponding pure COFs.

Postsynthetic Modification of a Covalent Organic Framework Achieved via Strain-Promoted Cycloaddition.

Two-dimensional covalent organic frameworks (2D COFs) are layered, structurally regular, and permanently porous macromolecules. When reactive groups are embedded into a COF structure, subsequent chemical reactions can be performed following polymerization. As such, a postsynthetic modification (PSM) strategy provides diverse materials from a single set of COF monomers and polymerization protocols. Here, we report the synthesis of an asymmetric dibenzocyclooctyne-containing imine-linked 2D COF, which readily undergoes strain-promoted azide-alkyne cycloaddition (SPAAC) reactions without catalyst under mild and dilute conditions. This approach was used to quantitatively decorate the COF lattice with alkyl chains and amines, all without the need for exogenous species. Functionalization may result in spontaneous delamination of bulk COF materials into solution-stable sheets, demonstrating the utility of this technique. As such, this platform is useful for postsynthetic functionalization with sensitive chemical functionalities that are not amenable to direct polymerization or existing PSM strategies.

Lithium-Conducting Self-Assembled Organic Nanotubes.

Supramolecular polymers are compelling platforms for the design of stimuli-responsive materials with emergent functions. Here, we report the assembly of an amphiphilic nanotube for Li-ion conduction that exhibits high ionic conductivity, mechanical integrity, electrochemical stability, and solution processability. Imine condensation of a pyridine-containing diamine with a triethylene glycol functionalized isophthalaldehyde yields pore-functionalized macrocycles. Atomic force microscopy, scanning electron microscopy, and in solvo X-ray diffraction reveal that macrocycle protonation during their mild synthesis drives assembly into high-aspect ratio (>103) nanotubes with three interior triethylene glycol groups. Electrochemical impedance spectroscopy demonstrates that lithiated nanotubes are efficient Li+ conductors, with an activation energy of 0.42 eV and a peak room temperature conductivity of 3.91 ± 0.38 × 10-5 S cm-1. 7Li NMR and Raman spectroscopy show that lithiation occurs exclusively within the nanotube interior and implicates the glycol groups in facilitating efficient Li+ transduction. Linear sweep voltammetry and galvanostatic lithium plating-stripping tests reveal that this nanotube-based electrolyte is stable over a wide potential range and supports long-term cyclability. These findings demonstrate how the coupling of synthetic design and supramolecular structural control can yield high-performance ionic transporters that are amenable to device-relevant fabrication, as well as the technological potential of chemically designed self-assembled nanotubes.

Transient Catenation in a Zirconium-Based Metal-Organic Framework and Its Effect on Mechanical Stability and Sorption Properties.

Interpenetration of two or more sublattices is common among many metal-organic frameworks (MOFs). Herein, we study the evolution of one zirconium cluster-based, 3,8-connected MOF from its non-interpenetrated (NU-1200) to interpenetrated (STA-26) isomer. We observe this transient catenation process indirectly using ensemble methods, such as nitrogen porosimetry and X-ray diffraction, and directly, using high-resolution transmission electron microscopy. The approach detailed here will serve as a template for other researchers to monitor the interpenetration of their MOF samples at the bulk and single-particle limits. We investigate the mechanical stability of both lattices experimentally by pressurized in situ X-ray diffraction and nanoindentation as well as computationally with density functional theory calculations. Both lines of study reveal that STA-26 is considerably more mechanically stable than NU-1200. We conclude this study by demonstrating the potential of these MOFs and their mixed phases for the capture of gaseous n-hexane, used as a structural mimic for the chemical warfare agent sulfur mustard gas.