RESUMO
Nondoped organic light-emitting diodes (OLEDs) are of paramount importance for display and lighting applications owing to their advantages of facile fabrication and outstanding stability. However, nondoped OLEDs achieving extraordinary electroluminescence (EL) performance and low turn-on voltage (Von) remain sparse. Here, three Ir(III) complexes featuring N-heterocyclic carbene (NHC) auxiliary ligands functionalized with electron-deficient aromatic sulfonyl or phosphine oxide groups are reported as promising emitters for nondoped OLEDs. All Ir(III) complexes exhibit green emission with relatively high neat film efficiency. Although the photoluminescence spectra of three complexes reveal similarities, there are distinct differences in the nondoped EL performance. The nondoped device N3 based on tBu-Ir-ISO displays the most eminent EL performances and presents a low Von of 2.1 V, a power efficiency of 30.7 lm W-1, and a maximum current efficiency of 27.0 cd A-1, which can be attributed to steric hindrance and balanced carrier-transporting ability induced by electron-deficient substituents. Moreover, doped devices D1-D3 also realize excellent EL performance. It is believed that the strategy reported herein is a simple and efficient way of constructing excellent Ir(III) complexes for nondoped phosphorescent OLEDs.
RESUMO
The design of efficient and inexpensive photocatalysts for CO2 photoreduction under visible light is of great significance for the sustainable development of the entire society. Herein, a copper-based metal-organic framework (MOF) (CUST-804) using a bulky tetraphenylethylene-tetrazole linker is synthesized and successfully used as a photocatalyst for CO2 reduction. The structural characterizations, as well as the photophysical properties, are investigated systematically. In the heterogeneous catalytic system, CUST-804 exhibits a robust CO production activity up to 2.71 mmol g-1 h-1 with excellent recyclability along with a selectivity of 82.8%, which is comparable with those of the reported copper-based MOF system. Theoretical calculations demonstrated that, among three kinds of coordinated model, only the 5-coordinated Cu site is active for CO2 reduction, in which the *COOH intermediate is stabilized and CO is readily desorbed. The results obtained herein can provide fresh insights into the realization of efficient copper-functionalized crystalline photocatalysts for CO2 reduction.
RESUMO
This paper proposes and implements a lightweight, "real-time" localization system (SORLA) with artificial landmarks (reflectors), which only uses LiDAR data for the laser odometer compensation in the case of high-speed or sharp-turning. Theoretically, due to the feature-matching mechanism of the LiDAR, locations of multiple reflectors and the reflector layout are not limited by geometrical relation. A series of algorithms is implemented to find and track the features of the environment, such as the reflector localization method, the motion compensation technique, and the reflector matching optimization algorithm. The reflector extraction algorithm is used to identify the reflector candidates and estimates the precise center locations of the reflectors from 2D LiDAR data. The motion compensation algorithm predicts the potential velocity, location, and angle of the robot without odometer errors. Finally, the matching optimization algorithm searches the reflector combinations for the best matching score, which ensures that the correct reflector combination could be found during the high-speed movement and fast turning. All those mechanisms guarantee the algorithm's precision and robustness in the high speed and noisy background. Our experimental results show that the SORLA algorithm has an average localization error of 6.45 mm at a speed of 0.4 m/s, and 9.87 mm at 4.2 m/s, and still works well with the angular velocity of 1.4 rad/s at a sharp turn. The recovery mechanism in the algorithm could handle the failure cases of reflector occlusion, and the long-term stability test of 72 h firmly proves the algorithm's robustness. This work shows that the strategy used in the SORLA algorithm is feasible for industry-level navigation with high precision and a promising alternative solution for SLAM.
Assuntos
Robótica , Algoritmos , Movimento (Física) , MovimentoRESUMO
Photothermal conversion ability (PCA) and cell internalization ability (CIA) are two key factors for determining the performance of photothermal agents. The previous studies mostly focus on improving the PCA by exploring new photothermal nanomaterials. Herein, the authors take the hybrids of graphene and gold nanostar (GGN) as an example to investigate the gradually enhanced phototherapy effect by changing the PCA and CIA of photothermal therapy (PTT) agent simultaneously. Based on the GGN, the GGN and the reduced GGN protected by bovine serum albumin (BSA) or BSA-FA (folic acid) are prepared, which are named as GGNB, rGGNB, and rGGNB-FA, respectively. The rGGNB showed an enhanced PCA compared to GGNB, leading to strong cell ablation. On the other hand, the 1,2-dioleoyl-3-trimethylammoniumpropan (DOTAP) can activate the endocytosis and promote the CIA of rGGNB, further help rGGNB to be more internalized into the cells. Finally, rGGNB-FA with the target ability can make itself further internalized into the cells with the aid of DOTAP, which can significantly destroy the cancer cells even at the low laser density of 0.3 W cm-2 . Therefore, a new angle of view is brought out for researching the PTT agents of high performance.
Assuntos
Grafite/química , Nanoestruturas/química , Fototerapia/métodos , Ácidos Graxos Monoinsaturados/química , Compostos de Amônio Quaternário/químicaRESUMO
The development of intrinsically stretchable organic photovoltaics (is-OPVs) with a high efficiency is of significance for practical application. However, their efficiencies lag far behind those of rigid or even flexible counterparts. To address this issue, an advanced top-illuminated OPV is designed and fabricated, which is intrinsically stretchable and has a high performance, through systematic optimizations from material to device. First, the stretchability of the active layer is largely increased by adding a low-elastic-modulus elastomer of styrene-ethylene-propylene-styrene tri-block copolymer (SEPS). Second, the stretchability and conductivity of the opaque electrode are enhanced by a conductive polymer/metal (denoted as M-PH1000@Ag) composite electrode strategy. Third, the optical and electrical properties of a sliver nanowire transparent electrode are improved by a solvent vapor annealing strategy. High-performance is-OPVs are successfully fabricated with a top-illuminated structure, which provides a record-high efficiency of 16.23%. Additionally, by incorporating 5-10% elastomer, a balance between the efficiency and stretchability of the is-OPVs is achieved. This study provides valuable insights into material and device optimizations for high-efficiency is-OPVs, with a low-cost production and excellent stretchability, which indicates a high potential for future applications of OPVs.
RESUMO
BACKGROUND: The Ministries of Justice and Education have implemented adolescent substance abuse prevention programs for many years. Rates of substance abuse among high school students continue to rise in spite of such programs. PURPOSE: This study investigates adolescents' substance abuse-related knowledge and attitudes and self-confidence to resist substance use in order to identify predictive factors of poor adolescent resistance to substance use. METHODS: A cross-sectional study survey gathered data on substance abuse-related knowledge and attitudes and self-confidence to resist substance use from 243 second-year senior high school students studying at two schools in northern Taiwan. RESULTS: Participants were most knowledgeable about tobacco (80.2%), followed by alcohol (72.0%), ecstasy (56.0%), and marijuana (30.0%). Only 19.3% demonstrated an understanding of the harmful effects of using Ketamine. A 10-point Likert scale measured participant substance use attitudes. Alcohol was the substance participants were most willing to use (2.18 ± 3.27), followed by tobacco (0.66 ± 2.19), ecstasy (0.45 ± 1.88), Ketamine (0.43 ± 1.93), and marijuana (0.38 ± 1.83). Participants had higher awareness of the harmful effects of Ketamine (t = -2.37, p = .018), marijuana (t = -2.33, p = .021), and tobacco (t = -2.02, p = .044), with participants reporting greater self-confidence to resist using these three substances. Multiple regression analysis found the three most important factors affecting participant self-confidence to resist substance use to be gender (ß= .26, p < .001), knowledge about the substance (ß= .15, p = .028), and attitude toward substance use (ß= -.20, p < .001). CONCLUSIONS / IMPLICATIONS FOR PRACTICE: Level of harmful effects knowledge and attitudes toward use varied among the various substances considered in this paper. Being female, having strong knowledge about the substance, and negative attitude toward substance use correlated with higher levels of self-confidence to resist substance use. Study results will be used in ongoing research designed to establish an empirical basis for adolescent substance use prevention and research, the results of which may be used directly by school nurses and military training education nurses.
Assuntos
Conhecimentos, Atitudes e Prática em Saúde , Transtornos Relacionados ao Uso de Substâncias/prevenção & controle , Adolescente , Comportamento do Adolescente , Estudos Transversais , Feminino , Humanos , Masculino , RiscoRESUMO
Morphology is of great significance to the performance of organic solar cells (OSCs), since appropriate morphology could not only promote the exciton dissociation, but also reduce the charge recombination. In this work, we have developed a solid additive-assisted layer-by-layer (SAA-LBL) processing to fabricate high-efficiency OSCs. By adding the solid additive of fatty acid (FA) into polymer donor PM6 solution, controllable pre-phase separation forms between PM6 and FA. This intermixed morphology facilitates the diffusion of acceptor Y6 into the donor PM6 during the LBL processing, due to the good miscibility and fast-solvation of the FA with chloroform solution dripping. Interestingly, this results in the desired morphology with refined phase-separated domain and vertical phase-separation structure to better balance the charge transport /collection and exciton dissociation. Consequently, the binary single junction OSCs based on PM6:Y6 blend reach champion power conversion efficiency (PCE) of 18.16% with SAA-LBL processing, which can be generally applicable to diverse systems, e.g., the PM6:L8-BO-based devices and thick-film devices. The efficacy of SAA-LBL is confirmed in binary OSCs based on PM6:L8-BO, where record PCEs of 19.02% and 16.44% are realized for devices with 100 and 250 nm active layers, respectively. The work provides a simple but effective way to control the morphology for high-efficiency OSCs and demonstrates the SAA-LBL processing a promising methodology for boosting the industrial manufacturing of OSCs.
RESUMO
The ternary blend is demonstrated as an effective strategy to promote the device performance of organic photovoltaics (OPVs) due to the dilution effect. While the compromise between the charge generation and recombination remains a challenge. Here, a mixed diluent strategy for further improving the device efficiency of OPV is proposed. Specifically, the high-performance OPV system with a polymer donor, i.e., PM6, and a nonfullerene acceptor (NFA), i.e., BTP-eC9, is diluted by the mixed diluents, which involve a high bandgap NFA of BTP-S17 and a low bandgap NFA of BTP-S16 (similar with that of the BTP-eC9). The BTP-S17 of better miscibility with BTP-eC9 can dramatically enhance the open-circuit voltage (VOC ), while the BTP-S16 maximizes the charge generation or the short-circuit current density (JSC ). The interplay of BTP-17 and BTP-S16 enables better compromise between charge generation and recombination, thus leading to a high device performance of 19.76% (certified 19.41%), which is the best among single-junction OPVs. Further analysis on carrier dynamics validates the efficacy of mixed diluents for balancing charge generation and recombination, which can be further attributed to the more diverse energetic landscapes and improved morphology. Therefore, this work provides an effective strategy for high-performance OPV for further commercialization.
RESUMO
The surface contamination of SARS-CoV-2 is becoming a potential source of virus transmission during the pandemic of COVID-19. Under the cold environment, the infection incidents would be more severe with the increase of virus survival time. Thus, the disinfection of contaminated surfaces in both ambient and cold environments is a critical measure to restrain the spread of the virus. In our study, it was demonstrated that the 254 nm ultraviolet-C (UVC) is an efficient method to inactivate a coronavirus, mouse hepatitis virus strain A59 (MHV-A59). The inactivation rate to MHV-A59 coronavirus was up to 99.99% when UVC doses were 2.90 and 14.0 mJ/cm2 at room temperature (23 °C) and in cold environment (-20 °C), respectively. Further mechanistic study demonstrated that UVC could induce spike protein damage to partly impede virus attachment and genome penetration processes, which contributes to 12% loss of viral infectivity. Additionally, it can induce genome damage to significantly interrupt genome replication, protein synthesis, virus assembly and release processes, which takes up 88% contribution to viral inactivation. With these mechanistic understandings, it will greatly contribute to the prevention and control of the current SARS-CoV-2 transmissions in cold chains (low temperature-controlled product supply chains), public area such as airport, school, and warehouse.
RESUMO
Organic functional materials have emerged as a promising class of emissive materials with potential application in cancer phototheranostics, whose molecular structures and solid-state packing in the microenvironment play an important role in reactive oxygen species (ROS) generation and the photodynamic therapy (PDT) effect. Clarifying the guidelines to precisely modulate PDT performance from molecular and aggregate levels is desired but remains challenging. In this work, two compounds, TCP-PF6 and TTCP-PF6, with similar skeletons are strategically synthesized, in which a thiophene segment is ingeniously introduced into the molecular backbone of TCP-PF6 to adjust the intrinsic molecular characteristics and packing in the aggregate state. The experimental and theoretical results demonstrate that TTCP-PF6 can form tight packing mode in comparison with TCP-PF6, resulting in efficient cell imaging and enhanced ROS generation ability in vitro and in vivo. The promising features make TTCP-PF6 a superior photosensitizer for PDT treatment against cancer cells by targeting mitochondria. These findings can provide a feasible molecular design for modulating the biological activity and developing photosensitizers with high ROS generation and PDT effect.
Assuntos
Neoplasias , Fotoquimioterapia , Humanos , Estrutura Molecular , Neoplasias/tratamento farmacológico , Fotoquimioterapia/métodos , Fármacos Fotossensibilizantes/química , Espécies Reativas de Oxigênio , Microambiente TumoralRESUMO
Although face masks as personal protective equipment (PPE) are recommended to control respiratory diseases with the on-going COVID-19 pandemic, improper handling and disinfection increase the risk of cross-contamination and compromise the effectiveness of PPE. Here, we prepared a self-cleaning mask based on a highly efficient aggregation-induced emission photosensitizer (TTCP-PF6) that can destroy pathogens by generating Type I and Type II reactive oxygen species (ROS). The respiratory pathogens, including influenza A virus H1N1 strain and Streptococcus pneumoniae (S. pneumoniae) can be inactivated within 10 min of ultra-low power (20 W/m2) white light or simulated sunlight irradiation. This TTCP-PF6-based self-cleaning strategy can also be used against other airborne pathogens, providing a strategy for dealing with different microbes.
Assuntos
COVID-19 , Vírus da Influenza A Subtipo H1N1 , Dispositivos Eletrônicos Vestíveis , Humanos , Fármacos Fotossensibilizantes , COVID-19/prevenção & controle , Pandemias/prevenção & controleRESUMO
Near-infrared (NIR) photosensitizers with rapid reactive oxygen species (ROS) production ability are in great demand owing to their promising performance toward boosting photodynamic therapy (PDT) and deep-tissue imaging, but molecular design guidelines for efficient photosensitizers are rarely elucidated. Herein, three AIEgens named DBP, TBP, and TBP-SO3 are designed and synthesized by precise donor-acceptor (D-A) molecular engineering to deeply understand the structure-property-application relationships. All the compounds exhibit AIE characteristics with strong long-wavelength emission in the aggregated state and are capable of efficiently producing ROS under white light irradiation. By controlling the ability of the D-A units, TBP-SO3 realizes NIR emission and more rapid ROS generation ability due to the promoted intersystem crossing processes compared with those of DBP and TBP. In addition, NIR-emitting TBP-SO3 is capable of specific endoplasmic reticulum targeting and excellent PDT treatment ability of cancer cells and bacteria. This successful example of molecular engineering paves a valuable way for developing advanced PSs with AIE properties, efficient ROS generation ability, and intense emission for fluorescence imaging PDT.
Assuntos
Fotoquimioterapia , Fármacos Fotossensibilizantes , Luz , Imagem Óptica , Fotoquimioterapia/métodos , Fármacos Fotossensibilizantes/farmacologia , Espécies Reativas de OxigênioRESUMO
Lipid-based nanoparticles as gene vectors have attracted considerable attention for their high gene transfection efficiency and low cytotoxicity. In our previous work, we synthesized gold nanoparticles/dimethyldioctadecylammonium bromide (DODAB)/dioleoylphosphatidylethanolamine (DOPE) (GDD) as anionic lipid- and pH-sensitive gene vectors. To further realize targeted gene transfection, a series of gold nanoparticles/DODAB/DOPE/DOPE-folic acid (DOPE-FA) with various ratios of DOPE-FA were prepared and termed as GFn (for which n=1.0, 2.5, 5.0, 7.5, or 10.0 %). The gene transfection efficiency mediated by GF2.5 can reach about 85 % for MCF-7 (FA-receptor-positive cells), higher than those of the negative control (GDD, 35 %) and positive control (Lipofectamine 2000, 65 %). However, GF2.5 does not further promote gene transfection into A549 (FA-receptor-negative cells). The higher gene transfection efficiency for MCF-7 cells can be attributed to enhanced cellular uptake efficiency mediated by the FA targeting ability. Furthermore, GF2.5 was also found to accumulate at the specific tumor site and showed enhanced inâ vivo gene delivery ability. In addition, no significant harm was observed for the main tissues of the mice after treatment with GF2.5. Therefore, GF2.5, with the targeting ability and improved transfection efficiency, shows promise for its utility in gene therapy for tumor cells that overexpress FA receptors. We believe the results of this study will find more broad applications in gene therapy.
Assuntos
Ácido Fólico/química , Vetores Genéticos/metabolismo , Ouro/química , Nanopartículas Metálicas/química , Fosfatidiletanolaminas/química , Transfecção/métodos , Células A549 , Animais , Sobrevivência Celular/efeitos dos fármacos , Vetores Genéticos/química , Humanos , Células MCF-7 , Nanopartículas Metálicas/uso terapêutico , Nanopartículas Metálicas/toxicidade , Camundongos , Microscopia Confocal , Neoplasias/tratamento farmacológico , Rodaminas/química , Espectrofotometria UltravioletaRESUMO
Methyl red, methylene blue and biochar were used to investigate simultaneous adsorption of dyes onto low-cost adsorbent at different concentrations combinations. Langmuir mixed model could describe the adsorption well at low concentrations. However, it could not describe the adsorption anymore when concentrations of methyl red and methylene blue were higher than 255 and 300 mg L(-1) respectively with 0.5 g L(-1) biochar loading. A new model on the interaction among adsorbed adsorbates at equilibrium was developed. It could describe the adsorption at high concentrations well. According to the experimental results, interaction among dyes molecules would replace the competition onto adsorbent to be the main factor influencing adsorption when amount of adsorbed adsorbates were higher than those required to form a monolayer on all the adsorbing sites of adsorbent. The model was further verified by adsorption with other solute such as glucose or NaCl in solution.
Assuntos
Compostos Azo/química , Carvão Vegetal/química , Azul de Metileno/química , Adsorção , Carbono/química , Corantes/química , Concentração de Íons de Hidrogênio , Cinética , Soluções , TermodinâmicaRESUMO
The 16e half-sandwich complex Cp*Co(S(2)C(2)B(10)H(10))(1, Cp* = pentamethylcyclopentadienyl) reacts with N-1-naphthylpropargylamide to afford two 18e complexes (2) and (3). 2 is a 1 : 1 adduct containing a four-membered metallacycle. In 3 the alkyne is twofold inserted into one Co-S bond in a head-head mode. Reactions of 1 with 1-(2-furyl)-2-propyn-1-one and 1-ferrocenyl-2-propyn-1-one lead to two types of alkyne twofold inserted products (4)/(5) and (6)/(7), respectively. The reaction of 1 with phenylacetylene gives rise to the sole complex (8) of the same structural type as 3, 4 and 6, whereas the reaction of 1 with dimethyl acetylene dicarboxylate affords the sole 1 : 1 adduct (9). Complexes 2-9 have been characterized by IR, NMR, elemental analysis and mass spectrometry, and 3-9 have also been determined by single-crystal X-ray diffraction analysis.