Bacteriostatic Behavior of PLA-BaTiO3 Composite Fibers Synthesized by Centrifugal Spinning and Subjected to Aging Test.

The present work investigated the effect of Polylactic acid (PLA) fibers produced by centrifugal spinning with incorporated BaTiO3 particles to improve their bacteriostatic behavior. The PLA matrix and three composites, presenting three different amounts of fillers, were subjected to UV/O3 treatment monitoring the possible modifications that occurred over time. The morphological and physical properties of the surfaces were characterized by different microscopic techniques, contact angle, and surface potential measurements. Subsequently, the samples were tested in vitro with human dermal fibroblasts (HDF) to verify the cytotoxicity of the substrates. No significant differences between the PLA matrix and composites emerged; the high hydrophobicity of the fibers, derived by the polymer structure, represented an obstacle limiting the fibroblast attachment. Samples underwent bacterial exposure (Staphylococcus epidermidis) for 12 and 24 h. Increasing the concentration of BT, the number of living bacteria and their distribution decreased in comparison with the PLA matrix suggesting an effect of the inorganic filler, which generates a neutralization effect leading to reactive oxygen species (ROS) generation and subsequently to bacterial damages. These results suggest that the barium titanate (BT) fillers clearly improve the antibacterial properties of PLA fibers after aging tests made before bacterial exposure, representing a potential candidate in the creation of composites for medical applications.

Fabrication of 3D PCL/PVP scaffolds using monosodium glutamate as porogen by solvent casting/particulate leaching method for oral and maxillofacial bone tissue engineering.

The design of three-dimensional (3D) scaffolds should focus on creating highly porous, 3D structures with an interconnected pore network that supports cell growth. The scaffold's pore interconnectivity is directly linked to vascularization, cell seeding, guided cell migration, and transportation of nutrients and metabolic waste. In this study, different types of food flavors including monosodium glutamate, sugar, and sodium chloride were used as the porogens along with PCL/PVP blend polymer for solvent casting/particulate leaching method. The morphology, porosity, interconnectivity, chemical composition, water absorption, and mechanical properties of the fabricated scaffolds are carefully characterized. The scaffolds are biocompatible in bothin vitroandin vivoexperiments and do not trigger any inflammatory response while enhancing new bone formation and vascularization in rabbit calvaria critical-sized defects. The new bone merges and becomes denser along with the experiment timeline. The results indicate that the 3D PCL/PVP scaffolds, using monosodium glutamate as porogen, exhibited suitable biological performance and held promise for bone tissue engineering in oral and maxillofacial surgery.

Polycaprolactone Hybrid Scaffold Loaded With N,O-Carboxymethyl Chitosan/Aldehyde Hyaluronic Acid/Hydroxyapatite Hydrogel for Bone Regeneration.

Hydrogels have emerged as potential materials for bone grafting, thanks to their biocompatibility, biodegradation, and flexibility in filling irregular bone defects. In this study, we fabricated a novel NAH hydrogel system, composed of N,O-carboxymethyl chitosan (NOCC), aldehyde hyaluronic acid (AHA), and hydroxyapatite (HAp). To improve the mechanical strength of the fabricated hydrogel, a porous polycaprolactone (PCL) matrix was synthesized and used as a three-dimensional (3D) support template for NAH hydrogel loading, forming a novel PCL/NAH hybrid scaffold. A mixture of monosodium glutamate (M) and sucrose (S) at varied weight ratios (5M:5S, 7M:3S, and 9M:1S) was used for the fabrication of 3D PCL matrices. The morphology, interconnectivity, and water resistance of the porous PCL scaffolds were investigated for optimal hydrogel loading efficiency. The results demonstrated that PCL scaffolds with porogen ratios of 7M:3S and 9M:1S possessed better interconnectivity than 5M:5S ratio. The compressive strength of the PCL/NAH hybrid scaffolds with 9M:1S (561.6 ± 6.1 kPa) and 7M:3S (623.8 ± 6.8 kPa) ratios are similar to cancellous bone and all hybrid scaffolds were biocompatible. Rabbit models with tibial defects were implanted with the PCL/NAH scaffolds to assess the wound healing capability. The results suggest that the PCL/NAH hybrid scaffolds, specifically those with porogen ratio of 7M:3S, exhibit promising bone healing effects.

Antibacterial Property of Cellulose Acetate Composite Materials Reinforced with Aluminum Nitride.

Cellulose acetate (CA) is a synthetic compound that is derived from the acetylation of cellulose. CA is well known as it has been used for many commercial products such as textiles, plastic films, and cigarette filters. In this research, antibacterial CA composites were produced by addition of aluminum nitride (AlN) at different weight percentage, from 0 wt. % to 20 wt. %. The surface characterization was performed using laser microscope, Raman and FTIR spectroscopy. The mechanical and thermal properties of the composite were analyzed. Although the mechanical strength tended to decrease as the concentration of AlN increased and needed to be optimized, the melting temperature (Tm) and glass transition temperature (Tg) showed a shift toward higher values as the AlN concentration increased leading to an improvement in thermal properties. AlN additions in weight percentages >10 wt. % led to appreciable antibacterial properties against S. epidermidis and E. coli bacteria. Antibacterial CA/AlN composites with higher thermal stability have potential applications as alternative materials for plastic packaging in the food industry.

Leuco-Based Composite Resin Dosimeter Film.

A polystyrene (PS)-based composite resin dosimeter (CRD) film comprising 2-(phenylamino)-6-(dipentylamino)-3-methylspiro[9H-xanthene-9,3'-phthalide] (Black305) fluoran leuco dye, cerium-doped yttrium aluminum perovskite YAlO3:Ce (YAP:Ce) scintillator, and 2-(4-methoxystyryl)-4,6-bis(trichloromethyl)-1,3,5-triazine (MBTT) photoacid generator was developed for the visualization of X-ray exposure doses in the range of 18-170 Gy. The color of the CRD film changed from yellow to black within this range based on the X-ray exposure dose. A CRD film based on Black305/YAP:Ce/MBTT/PS could be used to produce a dosimeter with various color change sensitivities by controlling the thermodynamic parameters of the constituent materials. A CRD film is a promising tool for measuring the X-ray exposure dose and can be used as an alternative to the existing radiochromic dosimeters.

Facile and Scalable Fabrication of Porous Polystyrene Fibers for Oil Removal by Centrifugal Spinning.

The demand for an efficient oil sorbent with high sorption capacity, low cost, scalable fabrication, and high selectivity for the cleanup of spreading oil on water is increasingly urgent due to the frequent occurrence of oil spill accidents in seawater all over the world. In this study, porous polystyrene (PS) fibers with high hydrophobicity and superoleophilicity were directly fabricated by a centrifugal spinning method (CS). The effect of solvents, tetrahydrofuran (THF), and dimethylformamide (DMF) on the morphology and porous structure of the polystyrene fibers was evaluated by using scanning electron microscopy and nitrogen adsorption-desorption experiments. The formation mechanism for the porous structure on the fibers was also evaluated. The oil sorption capacities of the PS fibers for silicon oil, pump oil, and vegetable oil were investigated. The highest oil sorption capacity was found in PS fibers fabricated from PS solution with a THF/DMF weight ratio of 1/3, which exhibited the highest specific surface area, pore volume, and porosity. The high productivity and highly porous structure of PS fibers indicate that CS is a promising method to fabricate porous fibers for the cleanup of oil spills.

Centrifugally Spun Recycled PET: Processing and Characterization.

Centrifugal spinning, which is a high-productivity fiber fabrication technique, was used to produce a value-added product from recycled poly(ethylene terephthalate) (rPET). In the present study, rPET fibers, with fiber diameters ranging from submicron to micrometer in scale, were fabricated by spinning a solution of rPET in a mixture of dichloromethane and trifluoroacetic acid. The influence of the polymer solution concentration (the viscosity), the rotational speed of the spinneret, and the inner diameter of the needles on the formation and morphology and mechanical properties of the fibers were examined through scanning electron microscopy and using a tensile testing machine. The thermal behaviors of fibrous mats with various average diameters were also investigated through differential scanning calorimetry. The smoothest and smallest fibers, with an average diameter of 619 nm, were generated using an rPET solution of 10 wt % under a rotation speed of 15,000 rpm using needles having an inner diameter of 160 µm. The fibrous mats have an average tensile strength and modulus of 4.3 MPa and 34.4 MPa, respectively. The productivity and the mechanical properties indicate that centrifugal spinning is an effective technique to fabricate high-value product from rPET.