Validating MODIS and Sentinel-2 NDVI Products at a Temperate Deciduous Forest Site Using Two Independent Ground-Based Sensors.

Quantifying the accuracy of remote sensing products is a timely endeavor given the rapid increase in Earth observation missions. A validation site for Sentinel-2 products was hence established in central Germany. Automatic multispectral and hyperspectral sensor systems were installed in parallel with an existing eddy covariance flux tower, providing spectral information of the vegetation present at high temporal resolution. Normalized Difference Vegetation Index (NDVI) values from ground-based hyperspectral and multispectral sensors were compared with NDVI products derived from Sentinel-2A and Moderate-resolution Imaging Spectroradiometer (MODIS). The influence of different spatial and temporal resolutions was assessed. High correlations and similar phenological patterns between in situ and satellite-based NDVI time series demonstrated the reliability of satellite-based phenological metrics. Sentinel-2-derived metrics showed better agreement with in situ measurements than MODIS-derived metrics. Dynamic filtering with the best index slope extraction algorithm was nevertheless beneficial for Sentinel-2 NDVI time series despite the availability of quality information from the atmospheric correction procedure.

Simulation of forest tree species' bud burst dates for different climate scenarios: chilling requirements and photo-period may limit bud burst advancement.

This study investigates whether the assumed increase of winter and spring temperatures is depicted by phenological models in correspondingly earlier bud burst (BB) dates. Some studies assume that rising temperatures lead to an earlier BB, but even later BB has been detected. The phenological model PIM (promoter-inhibitor-model) fitted to the extensive phenological database of the German Weather Service was driven by several climate scenarios. This model accounts for the complicated mechanistic interactions between chilling requirements, temperature and photo-period. It predicts BB with a r 2 between 0.41 and 0.62 and a RMSE of around 1 week, depending on species. Parameter sensitivities depict species dependent interactions between growth and chilling requirements as well as photo-period. A mean trend to earlier BB was revealed for the period 2002- 2100, varying between -0.05 and -0.11 days per year, depending on species. These trends are lower than for the period 1951- 2009. Within climate scenario period, trends are decreasing for beech and chestnut, stagnating for birch and increasing for oak. Results suggest that not fulfilled chilling requirements accompanied by an increasing dependency on photo-period potentially limit future BB advancement. The combination of a powerful phenological model, a large scale phenological database and several climate scenarios, offers new insights into the mechanistic comprehension of spring phenology.

Monitoring and assessing of landscape heterogeneity at different scales.

In numerous studies, spatial and spectral aggregations of pixel information using average values from imaging spectrometer data are suggested to derive spectral indices and the subsequent vegetation parameters that are derived from these. Currently, there are very few empirical studies that use hyperspectral data, to support the hypothesis for deriving land surface variables from different spectral and spatial scales. In the study at hand, for the first time ever, investigations were carried out on fundamental scaling issues using specific experimental test flights with a hyperspectral sensor to investigate how vegetation patterns change as an effect of (1) different spatial resolutions, (2) different spectral resolutions, (3) different spatial and spectral resolutions as well as (4) different spatial and spectral resolutions of originally recorded hyperspectral image data compared to spatial and spectral up- and downscaled image data. For these experiments, the hyperspectral sensor AISA-EAGLE/HAWK (DUAL) was mounted on an aircraft to collect spectral signatures over a very short time sequence of a particular day. In the first experiment, reflectance measurements were collected at three different spatial resolutions ranging from 1 to 3 m over a 2-h period in 1 day. In the second experiment, different spectral image data and different additional spatial data were collected over a 1-h period on a particular day from the same test area. The differently recorded hyperspectral data were then spatially and spectrally rescaled to synthesize different up- and down-rescaled images. The normalised difference vegetation index (NDVI) was determined from all image data. The NDVI heterogeneity of all images was compared based on methods of variography. The results showed that (a) the spatial NDVI patterns of up- and downscaled data do not correspond with the un-scaled image data, (b) only small differences were found between NDVI patterns determined from data recorded and resampled at different spectral resolutions and (c) the overall conclusion from the tests carried out is that the spatial resolution is more important in determining heterogeneity by means of NDVI than the depth of the spectral data. The implications behind these findings are that we need to exercise caution when interpreting and combining spatial structures and spectral indices derived from satellite images with differently recorded geometric resolutions.

A new multiscale approach for monitoring vegetation using remote sensing-based indicators in laboratory, field, and landscape.

Remote sensing is an important tool for studying patterns in surface processes on different spatiotemporal scales. However, differences in the spatiospectral and temporal resolution of remote sensing data as well as sensor-specific surveying characteristics very often hinder comparative analyses and effective up- and downscaling analyses. This paper presents a new methodical framework for combining hyperspectral remote sensing data on different spatial and temporal scales. We demonstrate the potential of using the "One Sensor at Different Scales" (OSADIS) approach for the laboratory (plot), field (local), and landscape (regional) scales. By implementing the OSADIS approach, we are able (1) to develop suitable stress-controlled vegetation indices for selected variables such as the Leaf Area Index (LAI), chlorophyll, photosynthesis, water content, nutrient content, etc. over a whole vegetation period. Focused laboratory monitoring can help to document additive and counteractive factors and processes of the vegetation and to correctly interpret their spectral response; (2) to transfer the models obtained to the landscape level; (3) to record imaging hyperspectral information on different spatial scales, achieving a true comparison of the structure and process results; (4) to minimize existing errors from geometrical, spectral, and temporal effects due to sensor- and time-specific differences; and (5) to carry out a realistic top- and downscaling by determining scale-dependent correction factors and transfer functions. The first results of OSADIS experiments are provided by controlled whole vegetation experiments on barley under water stress on the plot scale to model LAI using the vegetation indices Normalized Difference Vegetation Index (NDVI) and green NDVI (GNDVI). The regression model ascertained from imaging hyperspectral AISA-EAGLE/HAWK (DUAL) data was used to model LAI. This was done by using the vegetation index GNDVI with an R (2) of 0.83, which was transferred to airborne hyperspectral data on the local and regional scales. For this purpose, hyperspectral imagery was collected at three altitudes over a land cover gradient of 25 km within a timeframe of a few minutes, yielding a spatial resolution from 1 to 3 m. For all recorded spatial scales, both the LAI and the NDVI were determined. The spatial properties of LAI and NDVI of all recorded hyperspectral images were compared using semivariance metrics derived from the variogram. The first results show spatial differences in the heterogeneity of LAI and NDVI from 1 to 3 m with the recorded hyperspectral data. That means that differently recorded data on different scales might not sufficiently maintain the spatial properties of high spatial resolution hyperspectral images.

Reduction of radiometric miscalibration--applications to pushbroom sensors.

The analysis of hyperspectral images is an important task in Remote Sensing. Foregoing radiometric calibration results in the assignment of incident electromagnetic radiation to digital numbers and reduces the striping caused by slightly different responses of the pixel detectors. However, due to uncertainties in the calibration some striping remains. This publication presents a new reduction framework that efficiently reduces linear and nonlinear miscalibrations by an image-driven, radiometric recalibration and rescaling. The proposed framework-Reduction Of Miscalibration Effects (ROME)-considering spectral and spatial probability distributions, is constrained by specific minimisation and maximisation principles and incorporates image processing techniques such as Minkowski metrics and convolution. To objectively evaluate the performance of the new approach, the technique was applied to a variety of commonly used image examples and to one simulated and miscalibrated EnMAP (Environmental Mapping and Analysis Program) scene. Other examples consist of miscalibrated AISA/Eagle VNIR (Visible and Near Infrared) and Hawk SWIR (Short Wave Infrared) scenes of rural areas of the region Fichtwald in Germany and Hyperion scenes of the Jalal-Abad district in Southern Kyrgyzstan. Recovery rates of approximately 97% for linear and approximately 94% for nonlinear miscalibrated data were achieved, clearly demonstrating the benefits of the new approach and its potential for broad applicability to miscalibrated pushbroom sensor data.