Intermediates of Carbon Monoxide Oxidation on Praseodymium Monoxide Molecules: Insights from Matrix-Isolation IR Spectroscopy and Quantum-Chemical Calculations.

Identifying reaction intermediates in gas-phase investigations will provide understanding for the related catalysts in fundamental aspects including bonding interactions of the reaction species, oxidation states (OSs) of the anchored atoms, and reaction mechanisms. Herein, carbon monoxide (CO) oxidation by praseodymium monoxide (PrO) molecules has been investigated as a model reaction in solid argon using matrix-isolation IR spectroscopy and quantum-chemical calculations. Two reaction intermediates, OPr(η1-CO) and OPr(η2-CO), have been trapped and characterized in argon matrixes. The intermediate OPr(η2-CO) shows an extremely low C-O stretching band at 1624.5 cm-1. Quantum-chemistry studies indicate that the bonding in OPr(η1-CO) is described as "donor-acceptor" interactions conforming to the Dewar-Chatt-Duncanson motif. However, the bonding in OPr(η2-CO) results evidently from a combination of dominant ionic forces and normal Lewis "acid-base" interactions. The electron density of the singly occupied bonding orbital is strongly polarized to the CO fragment in OPr(η2-CO). Electronic structure analysis suggests that the two captured species exhibit Pr(III) OSs. Besides, the pathways of CO oxidation have been discussed.

Colloidal quantum dot solar cells exploiting hierarchical structuring.

Extremely thin-absorber solar cells offer low materials utilization and simplified manufacture but require improved means to enhance photon absorption in the active layer. Here, we report enhanced-absorption colloidal quantum dot (CQD) solar cells that feature transfer-stamped solution-processed pyramid-shaped electrodes employed in a hierarchically structured device. The pyramids increase, by up to a factor of 2, the external quantum efficiency of the device at absorption-limited wavelengths near the absorber band edge. We show that absorption enhancement can be optimized with increased pyramid angle with an appreciable net improvement in power conversion efficiency, that is, with the gain in current associated with improved absorption and extraction overcoming the smaller fractional decrease in open-circuit voltage associated with increased junction area. We show that the hierarchical combination of micron-scale structured electrodes with nanoscale films provides for an optimized enhancement at absorption-limited wavelengths. We fabricate 54.7° pyramid-patterned electrodes, conformally apply the quantum dot films, and report pyramid CQD solar cells that exhibit a 24% improvement in overall short-circuit current density with champion devices providing a power conversion efficiency of 9.2%.

Air-stable n-type colloidal quantum dot solids.

Colloidal quantum dots (CQDs) offer promise in flexible electronics, light sensing and energy conversion. These applications rely on rectifying junctions that require the creation of high-quality CQD solids that are controllably n-type (electron-rich) or p-type (hole-rich). Unfortunately, n-type semiconductors made using soft matter are notoriously prone to oxidation within minutes of air exposure. Here we report high-performance, air-stable n-type CQD solids. Using density functional theory we identify inorganic passivants that bind strongly to the CQD surface and repel oxidative attack. A materials processing strategy that wards off strong protic attack by polar solvents enabled the synthesis of an air-stable n-type PbS CQD solid. This material was used to build an air-processed inverted quantum junction device, which shows the highest current density from any CQD solar cell and a solar power conversion efficiency as high as 8%. We also feature the n-type CQD solid in the rapid, sensitive, and specific detection of atmospheric NO2. This work paves the way for new families of electronic devices that leverage air-stable quantum-tuned materials.

Multifunctional MgO Layer in Perovskite Solar Cells.

A multifunctional magnesium oxide (MgO) layer was successfully introduced into perovskite solar cells (PSCs) to enhance their performance. MgO was coated onto the surface of mesoporous TiO(2) by the decomposition of magnesium acetate and, therefore, could block contact between the perovskite and TiO(2). X-ray photoelectron spectroscopy and infrared spectroscopy showed that the amount of H(2)O/hydroxyl absorbed on the TiO(2) decreased after MgO modification. The UV/Vis absorption spectra of the perovskite with MgO modification revealed an enhanced photoelectric performance compared with that of unmodified perovskite after UV illumination. In addition to the photocurrent, the photovoltage and fill factor also showed an enhancement after modification, which resulted in an increase in the overall efficiency of the cell from 9.6 to 13.9 %. Electrochemical impedance spectroscopy (EIS) confirmed that MgO acts as an insulating layer to reduce charge recombination.

Jointly tuned plasmonic-excitonic photovoltaics using nanoshells.

Recent advances in spectrally tuned, solution-processed plasmonic nanoparticles have provided unprecedented control over light's propagation and absorption via engineering at the nanoscale. Simultaneous parallel progress in colloidal quantum dot photovoltaics offers the potential for low-cost, large-area solar power; however, these devices suffer from poor quantum efficiency in the more weakly absorbed infrared portion of the sun's spectrum. Here, we report a plasmonic-excitonic solar cell that combines two classes of solution-processed infrared materials that we tune jointly. We show through experiment and theory that a plasmonic-excitonic design using gold nanoshells with optimized single particle scattering-to-absorption cross-section ratios leads to a strong enhancement in near-field absorption and a resultant 35% enhancement in photocurrent in the performance-limiting near-infrared spectral region.

Inorganic halogen ligands in quantum dots: I-, Br-, Cl- and film fabrication through electrophoretic deposition.

Halogen ions (I(-), Br(-), Cl(-)) were added into a colloidal solution of CdSe and PbS quantum dots (QDs) to form QDs capped with these inorganic ligands. Halogen ions attached to QDs through electrostatic interactions and the varying coordination strength between the inorganic ligands and QDs led to different degrees of redispersion and stabilization in polar solvents. Moreover, we successfully conducted electrophoretic deposition (EPD) of QDs capped with inorganic ligands. Negatively charged QDs were adsorbed onto a positively charged TiO2 anode. The assembled QDs films were used in photovoltaic devices and offered better efficiency than QDs capped with organic ligands. This work demonstrates that halogen ions are indeed promising ligands to improve the stability of QDs with inorganic ligands and the EPD method shows prospects in assembling QDs films for practical applications.

Interface modification of 8-hydroxyquinoline aluminium with combined effects in quasi-solid dye-sensitized solar cells.

In this paper, 8-hydroxyquinoline aluminium (Alq(3)) was used in interface modification of dye-sensitized solar cells (DSCs). Alq(3) was the first discovered interface modification material with combined effects of retarding charge recombination and Förster resonant energy transfer (FRET). Results of dark current curve and AC impedance showed that Alq(3) could retard charge recombination in DSCs. I-V curves showed that conversion efficiency increased with Alq(3) modification. Besides the interface modification effect, it was discovered that Alq(3) also acted as energy relay dye with the FRET effect between itself and N3, which increased photoresponse and electron injection. The application of Alq(3) with combined effects opened a new door to explore more novel multi-functional interface modification materials to improve the performance of DSCs.

Photocatalysis of PbS quantum dots in a quantum dot-sensitized solar cell: photovoltaic performance and characteristics.

PbS QDs have been synthesized by an in situ photocatalysis method using the photocatalytic activity of nanocrystalline TiO(2) films. Both the photovoltaic response and size of the synthesized PbS QDs were analyzed. Compared with the conventional synthesis route, this method is simpler and produces less waste.

Interface modification effects of 4-tertbutylpyridine interacting with N3 molecules in quasi-solid dye-sensitized solar cells.

In this paper, the interface modification effects of 4-tertbutylpyridine (TBP), especially the interaction with dye molecules, were discussed. The results of FTIR showed that TBP interacted with dye molecules, in addition to its interaction with the TiO(2) film. Reaction between N3 and TBP by the interaction force of the H atom in the -COOH group of N3 and the N atom of TBP could retard the aggregation of dye molecules, decreasing the electron quenching and charge recombination. Furthermore, the results of cyclic voltammograms and UV-vis absorption edge revealed the interaction between TBP and dye molecules could cause the energy level of the dye molecules to change, influencing the electron injection efficiency in DSCs. The IPCE results indicated that with TBP modification, the injection efficiency decreased, but the electron collection efficiency was enhanced.

Photovoltage improvements and recombination suppression by montmorillonite addition to PEO gel electrolyte for dye-sensitized solar cells.

Montmorillonite (MMT) added to electrolytes has been reported in the literature to facilitate the transport of I(-)/I(3)(-), and improve the ionic conductivity and consequent photocurrent of dye-sensitized solar cells (DSCs). This paper firstly observes, investigates and reports that MMT addition to a poly(ethylene oxide) (PEO)-based gel electrolyte not only improves the ionic conductivity of the gel electrolyte, but also increases the photovoltage and decreases the dark current. From the results of electrochemical impedance spectroscopy (EIS) and transient photovoltage spectra, we evidence that MMT in the polymer gel electrolyte can efficiently retard the charge recombination that occurs at the TiO(2)/dye/electrolyte interfaces.

Solar cells based on inks of n-type colloidal quantum dots.

New inorganic ligands including halide anions have significantly accelerated progress in colloidal quantum dot (CQD) photovoltaics in recent years. All such device reports to date have relied on halide treatment during solid-state ligand exchanges or on co-treatment of long-aliphatic-ligand-capped nanoparticles in the solution phase. Here we report solar cells based on a colloidal quantum dot ink that is capped using halide-based ligands alone. By judicious choice of solvents and ligands, we developed a CQD ink from which a homogeneous and thick colloidal quantum dot solid is applied in a single step. The resultant films display an n-type character, making it suitable as a key component in a solar-converting device. We demonstrate two types of quantum junction devices that exploit these iodide-ligand-based inks. We achieve solar power conversion efficiencies of 6% using this class of colloids.

Doping control via molecularly engineered surface ligand coordination.

A means to control the net doping of a CQD solid is identified via the design of the bidentate ligand crosslinking the material. The strategy does not rely on implementing different atmospheres at different steps in device processing, but instead is a robust strategy implemented in a single processing ambient. We achieve an order of magnitude difference in doping that allows us to build a graded photovoltaic device and maintain high current and voltage at maximum power-point conditions.