Comparative Evaluation of Flavor and Sensory Quality of Coffee Pulp Wines.

Coffee pulp wines were produced through the mixed fermentation of Saccharomyces cerevisiae, and the flavor and sensory characteristics were comparatively evaluated. A total of 87 volatile components were identified from five coffee pulp wines, of which 68 were present in all samples, accounting for over 99% of the total concentration. The sample fermented contained significantly higher levels of volatile metabolites (56.80 mg/g). Alcohols (22 species) and esters (26 species) were the main flavor components, with the contents accounting for 56.45 ± 3.93% and 31.18 ± 4.24%, respectively, of the total. Furthermore, 14 characteristic components were identified as potential odor-active compounds, contributing to sweet and floral apple brandy flavor. Although the characteristic components are similar, the difference in the content makes the overall sensory evaluation of the samples different. The samples formed by fermentation of four strains, which obtained the highest score (86.46 ± 0.36) in sensory evaluation, were further interpreted and demonstrated through the Mantel test. The results of the component analysis were effectively distinguished by OPLS-DA and PCA, and this validation was supported by sensory evaluation. The research results provided a technical reference for the production of coffee pulp wines.

A Systematic Analysis of the Correlation between Flavor Active Differential Metabolites and Multiple Bean Ripening Stages of Coffea arabica L.

Coffee cherries contain a crucial flavor-precursor and chemical substances influencing roasted bean quality, yet limited knowledge exists on metabolite changes during cherry ripening. Our study identified 1078 metabolites, revealing 46 core differential metabolites using a KEGG pathway analysis. At the GF vs. ROF stage, amino acid synthesis dominated; ROF vs. BRF featured nucleotide catabolism; BRF vs. PRF exhibited glycoside and flavonoid synthesis; and PRF vs. PBF involved secondary metabolite synthesis and catabolism. The PRF stage emerged as the optimal cherry-harvesting period. A correlation analysis identified core differential metabolites strongly linked to taste indicators, suggesting their potential as taste markers. Notably, nucleotides and derivatives exhibited significant negative correlations with glycosides and flavonoids during ripening. This research systematically analyzed flavor and active substances in green coffee beans during cherry ripening, offering valuable insights into substance formation in Coffea arabica L.

Characterization of the Lipid Oxidation Process of Robusta Green Coffee Beans and Shelf Life Prediction during Accelerated Storage.

The lipid oxidation process of Robusta green coffee beans was characterized during accelerated storage for 20 days at 40 °C, 50 °C, and 60 °C. The conventional oxidation indexes and fatty acid compositions were evaluated, and the shelf life of the green coffee beans was predicted using the Arrhenius model. The acid value, iodine value, peroxide value, total oxidation value, thiobarbituric acid reactive substances, and free fatty acid content increased throughout storage, while the moisture content, p-anisidine value, and unsaturated fatty acid content decreased, which suggests that lipid oxidation occurred during accelerated storage. The predicted shelf life of green coffee bean samples were 57.39 days, 44.44 days, and 23.12 days when stored at 40 °C, 50 °C, and 60 °C, respectively. This study provided scientific evidence of the impact of lipid oxidation on the loss of quality during the accelerated storage of green coffee beans.

Effect of Microwave Vacuum Drying on the Drying Characteristics, Color, Microstructure, and Antioxidant Activity of Green Coffee Beans.

The aim of this study is to investigate the effect of microwave vacuum drying (MVD) on the drying characteristics and quality attributes of green coffee beans. We specifically focused on the effective moisture diffusion coefficient (Deff), surface temperature, glass transition temperature (Tg), water state, and microstructure. The kinetics of color changes during drying, total phenolic content (TPC), and antioxidant activity (DPPH, FRAP, and ABTS) were also characterized. Microwave power during MVD affected the porosity of coffee beans, their color, TPC, and antioxidant activity. The Allometric 1 model was the most suitable for simulating surface temperature rise kinetics. Thermal processing of green coffee beans resulted in increased b*, L*, ΔE, and TPC values, and greater antioxidant capacity. These findings may provide a theoretical reference for the technical improvement, mechanisms of flavor compound formation, and quality control of dried green coffee beans.

Differentiation of mint (Mentha haplocalyx Briq.) from different regions in China using gas and liquid chromatography.

In this study, complex substances such as Mint (Mentha haplocalyx Briq.) samples from different growing regions in China were analyzed for phenolic compounds by high-performance liquid chromatography with diode array detection and for the volatile aroma compounds by gas chromatography with mass spectrometry. Chemometrics methods, e.g. principal component analysis, back-propagation artificial neural networks, and partial least squares discriminant analysis, were applied to resolve complex chromatographic profiles of Mint samples. A total of 49 aroma components and 23 phenolic compounds were identified in 79 Mint samples. Principal component analysis score plots from gas chromatography with mass spectrometry and high-performance liquid chromatography with diode array detection data sets showed a clear distinction among Mint from three different regions in China. Classification results showed that satisfactory performance of prediction ability for back-propagation artificial neural networks and partial least squares discriminant analysis. The major compounds that contributed to the discrimination were chlorogenic acid, unknown 3, kaempherol 7-O-rutinoside, salvianolic acid L, hesperidin, diosmetin, unknown 6 and pebrellin in Mint according to regression coefficients of the partial least squares discriminant analysis model. This study indicated that the proposed strategy could provide a simple and rapid technique to distinguish clearly complex profiles from samples such as Mint.

Characterization of Fatty Acid, Amino Acid and Volatile Compound Compositions and Bioactive Components of Seven Coffee (Coffea robusta) Cultivars Grown in Hainan Province, China.

Compositions of fatty acid, amino acids, and volatile compound were investigated in green coffee beans of seven cultivars of Coffea robusta grown in Hainan Province, China. The chlorogenic acids, trigonelline, caffeine, total lipid, and total protein contents as well as color parameters were measured. Chemometric techniques, principal component analysis (PCA), hierarchical cluster analysis (HCA), and analysis of one-way variance (ANOVA) were performed on the complete data set to reveal chemical differences among all cultivars and identify markers characteristic of a particular botanical origin of the coffee. The major fatty acids of coffee were linoleic acid, palmitic acid, oleic acid, and arachic acid. Leucine (0.84 g/100 g DW), lysine (0.63 g/100 g DW), and arginine (0.61 g/100 g DW) were the predominant essential amino acids (EAAs) in the coffee samples. Seventy-nine volatile compounds were identified and semi-quantified by HS-SPME/GC-MS. PCA of the complete data matrix demonstrated that there were significant differences among all cultivars, HCA supported the results of PCA and achieved a satisfactory classification performance.

Optimized production of vanillin from green vanilla pods by enzyme-assisted extraction combined with pre-freezing and thawing.

Production of vanillin from natural green vanilla pods was carried out by enzyme-assisted extraction combined with pre-freezing and thawing. In the first step the green vanilla pods were pre-frozen and then thawed to destroy cellular compartmentation. In the second step pectinase from Aspergillus niger was used to hydrolyze the pectin between the glucovanillin substrate and ß-glucosidase. Four main variables, including enzyme amount, reaction temperature, time and pH, which were of significance for the vanillin content were studied and a central composite design (CCD) based on the results of a single-factor tests was used. Response surface methodology based on CCD was employed to optimize the combination of enzyme amount, reaction temperature, time, and pH for maximum vanillin production. This resulted in the optimal condition in regards of the enzyme amount, reaction temperature, time, and pH at 84.2 mg, 49.5 °C, 7.1 h, and 4.2, respectively. Under the optimal condition, the experimental yield of vanillin was 4.63% ± 0.11% (dwb), which was in good agreement with the value predicted by the model. Compared to the traditional curing process (1.98%) and viscozyme extract (2.36%), the optimized method for the vanillin production significantly increased the yield by 133.85% and 96%, respectively.

Microencapsulation of green coffee oil by complex coacervation of soy protein isolate, sodium casinate and polysaccharides: Physicochemical properties, structural characterisation, and oxidation stability.

This study developed a combination method between protein-polysaccharide complex coacervation and freezing drying for the preparation of green coffee oil (GCO) encapsulated powders. Different combinations of soy protein isolate, sodium caseinate, sodium carboxymethylcellulose, and sodium alginate were utilised as wall materials. The occurrence of complexation between the biopolymers were compared to the final emulsion of the individual protein and confirmed by fourier transform infrared spectrometry and X-ray diffraction. The mean diameter and estimated PDI of GCO microcapsules were 72.57-295.00 µm and 1.47-2.02, respectively. Furthermore, the encapsulation efficiency of GCO microcapsules was between 61.47 and 90.01 %. Finally, oxidation kinetics models of GCO and its microcapsules demonstrated that the zero-order model of GCO microcapsules was found to have a higher fit, which could better reflect the quality changes of GCO microcapsules during storage. Different combinations of proteins and polysaccharides exhibited effective oxidative stability against single proteins because of polysaccharide addition. This research revealed that soy protein isolate, sodium caseinate combined with polysaccharides can be used as a promising microencapsulating agent for microencapsulation of GCO, especially with sodium carboxymethylcellulose and sodium alginate, and provided useful information for the potential use of GCO in the development of powder food.

Integration of widely targeted metabolomics and the e-tongue reveals the chemical variation and taste quality of Yunnan Arabica coffee prepared using different primary processing methods.

UPLC-Q-TOF-MS and electronic tongue analysis were applied to analyse the metabolic profile and taste quality of Yunnan Arabica coffee under seven primary processing methods. The total phenolic content ranged from 34.44 to 44.42 mg/g DW, the e-tongue results revealed the strongest umami sensor response value in the sample prepared with traditional dry processing, while the samples prepared via honey processing II had the strongest astringency sensor response value. Metabolomics analysis identified 221 differential metabolites, with higher contents of amino acids and derivatives within dry processing II sample, and increased contents of lipids and phenolic acids in the honey processing III sample. The astringency and aftertaste-astringency of the coffee samples positively correlated with the trigonelline, 3,5-di-caffeoylquinic acid and 4-caffeoylquinic acid content. The results contributed to a better understanding of how the primary processing process affects coffee quality, and supply useful information for the enrichment of coffee biochemistry theory.

Potential of Milk-Derived Extracellular Vesicles as Carriers for Oral Delivery of Active Phytoconstituents.

Extracellular vesicles (EVs) play a crucial role in intercellular communication and have the potential to serve as in vivo carriers for delivering active molecules. The biocompatibility advantages of EVs over artificial nanocarriers create new frontiers for delivering modern active molecules. Milk is a favorable source of EVs because of its high bioavailability, low immunogenicity, and commercial producibility. In this review, we analyzed the advantages of milk-derived EVs in the oral delivery of active molecules, discussed their research progress in delivering active phytoconstituents, and summarized the necessary technologies and critical unit operations required for the development of an oral delivery system based on EVs. The review aims to provide innovative ideas and fundamental quality control guidelines for developing the next-generation oral drug delivery system based on milk-derived EVs.

Transcriptomic Analysis of Alternative Splicing Events during Different Fruit Ripening Stages of Coffea arabica L.

To date, genomic and transcriptomic data on Coffea arabica L. in public databases are very limited, and there has been no comprehensive integrated investigation conducted on alternative splicing (AS). Previously, we have constructed and sequenced eighteen RNA-seq libraries of C. arabica at different ripening stages of fruit development. From this dataset, a total of 3824, 2445, 2564, 2990, and 3162 DSGs were identified in a comparison of different fruit ripening stages. The largest proportion of DSGs, approximately 65%, were of the skipped exon (SE) type. Biologically, 9 and 29 differentially expressed DSGs in the spliceosome pathway and carbon metabolism pathway, respectively, were identified. These DSGs exhibited significant variations, primarily in S1 vs. S2 and S5 vs. S6, and they involve many aspects of organ development, hormone transduction, and the synthesis of flavor components. Through the examination of research findings regarding the biological functions and biochemical pathways associated with DSGs and DEGs, it was observed that six DSGs significantly enriched in ABC transporters, namely, LOC113712394, LOC113726618, LOC113739972, LOC113725240, LOC113730214, and LOC113707447, were continually down-regulated at the fruit ripening stage. In contrast, a total of four genes, which were LOC113732777, LOC113727880, LOC113690566, and LOC113711936, including those enriched in the cysteine and methionine metabolism, were continually up-regulated. Collectively, our findings may contribute to the exploration of alternative splicing mechanisms for focused investigations of potential genes associated with the ripening of fruits in C. arabica.

Simultaneous analysis of the oxidation of solvent-extracted and cold-pressed green coffee oil during accelerated storage using 1H NMR and 13C NMR spectroscopy.

Green coffee oil (GCO) extracted from green coffee beans, is known for its antioxidant and anticancer properties, and has been increasingly utilised in cosmetic and other consumer products. However, lipid oxidation of GCO fatty acid components during storage may be harmful to human health, and there remains a need to understand the evolution of GCO chemical component oxidation. In this study, proton nuclear magnetic resonance (1H and 13C NMR) spectroscopy was used to investigate the oxidation status of solvent-extracted and cold-pressed GCO under accelerated storage conditions. Results show that the signal intensity of oxidation products gradually increased with increasing oxidation time, while unsaturated fatty acid signals gradually weakened. Five different types of GCO extracts were clustered according to their properties, except for minor overlapping in the two-dimensional plane of the principal component analysis. Partial least squares-least analysis results demonstrate that oxidation products (δ = 7.8-10.3 ppm), unsaturated fatty acids (δ = 5.28-5.42 ppm), and linoleic acid (δ = 2.70-2.85 ppm) in 1H NMR can be used as characteristic indicators of GCO oxidation levels. Furthermore, the kinetics curves of unsaturated fatty acids, linoleic, and linolenic acyl groups all fit an exponential equation with high coefficients of GCO for 36 days under accelerated storage conditions. Our results show that the current NMR system is a fast, easy-operated and convenient tool for the oxidation process monitoring and quality control of GCO.

Headspace solid-phase microextraction coupled with gas chromatography-mass spectrometry (HS-SPME-GC-MS) and odor activity value (OAV) to reveal the flavor characteristics of ripened Pu-erh tea by co-fermentation.

Introduction: Pu-erh tea is a geographical indication product of China. The characteristic flavor compounds produced during the fermentation of ripened Pu-erh tea have an important impact on its quality. Methods: Headspace solid-phase microextraction coupled with gas chromatography-mass spectrometry (HS-SPME-GC-MS) and odor activity value (OAV) is used for flavor analysis. Results: A total of 135 volatile compounds were annotated, of which the highest content was alcohols (54.26%), followed by esters (16.73%), and methoxybenzenes (12.69%). Alcohols in ripened Pu-erh tea mainly contribute flower and fruit sweet flavors, while methoxybenzenes mainly contribute musty and stale flavors. The ripened Pu-erh tea fermented by Saccharomyces: Rhizopus: Aspergillus niger mixed in the ratio of 1:1:1 presented the remarkable flavor characteristics of flower and fruit sweet flavor, and having better coordination with musty and stale flavor. Discussion: This study demonstrated the content changes of ripened Pu-erh tea's flavor compounds in the fermentation process, and revealed the optimal fermentation time. This will be helpful to further understand the formation mechanism of the characteristic flavor of ripened Pu-erh tea and guide the optimization of the fermentation process of ripened Pu-erh tea.

The isolation of anthocyanin monomers from blueberry pomace and their radical-scavenging mechanisms in DFT study.

This study explored the isolation of anthocyanin monomers using a medium- and high-pressure separation technique as a means to increase the added value of a by-product of the blueberry juice industry. Six anthocyanin monomers were isolated with a purity of 95% and identified as mono-galactoside, glucoside, and isomers of delphinidin, malvidin, and even malvidin-3-O-arabinoside, malvidin-3-(6″-acetyl)-O-glucoside by LC-MS and 1H NMR. Following the conformation search, the computer calculation manifested the active sites of six anthocyanins (C4'-OH) and their stabilities based on the structural and energy parameters. The DPPH tests demonstrated that delphinidin glycoside's free radical scavenging ability (89.93 ± 2.03 % and 86.50 ± 3.16 %) was significantly higher than that of malvidin (80.39 ± 1.30 % and 81.02 ± 0.45 %), and that malvidin's capacity was improved by conjugation arabinoside (87.48 ± 2.39 %) and acetylated glucoside (88.39 ± 1.37 %), which was compatible with the computer calculation.

Effects of sequential inoculation of Lachancea thermotolerans and Oenococcus oeni on chemical composition of spent coffee grounds hydrolysates.

Spent coffee grounds (SCG) disposal is an environmental problem. These residues from coffee brewing and instant coffee production have potential to produce novel alcoholic beverages. SCG valorization through sequential alcoholic and malolactic fermentation was investigated using a yeast, Lachancea thermotolerans Concerto and a lactic acid bacterium (LAB), Oenococcus oeni Lalvin 31 in this study. Our results showed that sequential inoculation prevented early death of yeast confronted when simultaneous inoculation was adopted, allowing for growth and persistence of both yeast and LAB till the end of fermentation. Adequate ethanol production (4.91 ± 0.13 %, v/v) with low residual sugar content was also attained. In addition, relatively lower levels of acetic, lactic, and succinic acids were produced by sequential inoculation than that of simultaneous inoculation. Furthermore, SCG hydrolysates fermented via sequential inoculation had the widest variety of volatiles (e.g. esters and ketones). Overall, our results indicated that sequential inoculation of L. thermotolerans and O. oeni in SCG hydrolysates might be a way to develop novel beverages with pleasant flavor profiles.

Comparison of the effect of extraction methods on the quality of green coffee oil from Arabica coffee beans: Lipid yield, fatty acid composition, bioactive components, and antioxidant activity.

In this study, ultrasonic/microwave-assisted extraction (UMAE), microwave-assisted extraction (UAE), ultrasound-assisted extraction (UAE), and pressurized liquid extraction (PLE) were applied to extract green coffee oil (GCO), and the physicochemical indexes, fatty acids, tocopherols, diterpenes, and total phenols as well as antioxidant activity of GCO were investigated and compared. The results indicated that the extraction yield of UMAE was the highest (10.58 ± 0.32%), while that of PLE was the lowest (6.34 ± 0.65%), and linoleic acid and palmitic acid were the major fatty acids in the GCO, ranging from 40.67% to 43.77% and 36.57% to 38.71%, respectively. A large proportion of fatty acids and phytosterols were not significantly influenced by the four extraction techniques. However, tocopherols, diterpenes, total phenols, and the free radical scavenging activity were significantly different among these four GCOs. Moreover, structural changes in the coffee residues were explored by scanning electron microscopy and Fourier transform infrared spectroscopy. Overall, the high antioxidant activity of GCO demonstrated that it can be used as a highly economical natural product in the food and agricultural industries.

Inhibitory Activity on the Formation of Reactive Carbonyl Species in Edible Oil by Synthetic Polyphenol Antioxidants.

Food lipids play an important role in food quality, and their attributes contribute to texture, flavor, and nutrition. However, high-temperature processing leads to lipid peroxidation, degradation, and the formation of reactive carbonyl species (RCS), such as acrolein (ACR), glyoxal (GO), and methylglyoxal (MGO). We investigated the changes in the peroxidation value (POV), Rancimat induction time, formation and total amount of RCS, and inhibitory effects of synthetic polyphenol antioxidants on ACR/GO/MGO in plant oils during heating processing through an accelerated oxidation test using Rancimat. With increasing temperature and heating time, the amounts of ACR, GO, and MGO in oil increased and the level of ACR was about several times higher than that of GO and MGO. We also found that some amounts of ACR, GO, and MGO were produced at the initial stage before reaching the peak value of POV, even before oil oxidative rancidity, and the common antioxidant butyl hydroxyanisole (BHA)/butylated hydroxytoluene (BHT) could not remove them once they were generated. This is first time to purify PG-ACR-MGO and elucidate the structure based on analysis of their high resolution mass spectrometry and 1H, 13C, and two-dimensional nuclear magnetic resonance. We further found that PG rather than BHT and BHA efficiently trapped ACR, OG, and MGO to form adducts in oil and roasted beef burgers with corn oil. Additionally, after incubation at 80 °C, the trapping order of PG was as follows: ACR, MGO, and GO, and the adduct of PG-ACR was formed within 1 min; after 10 min, PG-MGO was generated; and three adducts formed at 15 min. However, PG could not trap ACR, GO, or MGO to form adducts at room temperature. This study provided novel knowledge to advance our understanding of the ability of synthetic polyphenol antioxidants to scavenge RCS simultaneously, such as ACR, MGO, and GO. Our findings demonstrated that PG, as an inhibitor of RCS, is suitable for medium- and high-temperature food processing but not for normal-temperature storage.

Chemical composition, structural and functional properties of soluble dietary fiber obtained from coffee peel using different extraction methods.

This study aimed to evaluate the effects of chemical, enzymatic, chemical-enzymatic, ultrasound-assisted enzymatic, and shear emulsifying-assisted enzymatic extraction methods on the physicochemical, structural, and functional properties of soluble dietary fiber from coffee peel. We found that the highest extraction yield of soluble dietary fiber was obtained using the shear emulsifying-assisted enzymatic method, and that similar protein contents were obtained from coffee peel using the enzymatic and shear emulsifying-assisted enzymatic methods. Compared with the other extraction methods, shear emulsifying-assisted enzymatic processing resulted in a higher water-holding capacity (7.05 g/g) and oil-holding capacity (3.61 g/g), but a lower emulsifying capacity (58.50%) when compared with that of chemical, enzymatic, and chemical-enzymatic processings. The soluble dietary fiber obtained from coffee peel using shear emulsifying-assisted enzymatic extraction was also characterized by the highest glucose absorption activity (228.06 mg/g), and enzymatic processing resulted in the highest nitrite ion absorption capacity (10.09 mg/g, pH = 2). These results indicated that shear emulsifying-assisted enzymatic extraction method was the most appropriate extraction method for coffee peel soluble dietary fiber.

Mechanistic studies of inhibition on acrolein by myricetin.

Acrolein (ACR) is an unsaturated aldehyde with high activity and toxicity and is produced in vivo and in food. This study investigated the impact of B-ring structure on the trapping of ACR by flavonols and the trapping mechanism and efficacy of ACR by myricetin. Galangin, kaempferol, quercetin, and myricetin, which possess the same A- and C-ring but different numbers of -OH groups on the B-ring, were selected for this study. Our results suggested that increasing the number of -OH groups on the B-ring can enhance the ACR trapping efficacy of flavonol and myrectin was identified as the most active flavonol. The adducts of myricetin with ACR under different ratios and incubation times were analyzed using LC-MS/MS. We also purified and identified the major mono- and di-ACR-myricetin adducts. Furthermore, myricetin could dose-dependently inhibit the formation of ACR in cookies through the formation of mono- and di-ACR adducts.

Comparative evaluation of the volatile profiles and taste properties of roasted coffee beans as affected by drying method and detected by electronic nose, electronic tongue, and HS-SPME-GC-MS.

In this study, room-temperature drying, solar drying, heat pump drying (HPD), hot-air drying, and freeze drying were applied to investigate the volatile profiles and taste properties of roasted coffee beans by using electronic nose, electronic tongue, and headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC-MS). Results indicated that the drying process markedly affected pH, total titratable acidity, total solids, and total soluble solids. Significant differences existed among all samples based on drying method; and the HPD method was superior for preserving ketones, phenols, and esters. Principal component analysis (PCA) combined with E-nose and E-tongue radar charts as well as the fingerprint of HS-SPME-GC-MS could clearly discriminate samples from different drying methods, with results obtained from hierarchical cluster analysis (the Euclidean distance is 0.75) being in agreement with those of PCA. These findings may provide a theoretical basis for the dehydration of coffee beans and other similar thermo-sensitive agricultural products.