RESUMO
Sternal closure after median sternotomy traditionally uses a stainless steel wire cerclage. Sternal wires are placed through or around the sternum, and the wire ends are twisted together to bring the sternum back together. Complications of this technique include sternal instability, dehiscence, non-union, and increased pain. Compared to traditional wire cerclage, the Figure 8 FlatWire Sternal Closure System has been demonstrated to be stronger and significantly reduce sternal cut-through and postoperative pain. There was no significant difference in hospital length of stay or mean hospitalization cost. Operative time was slightly longer in the FlatWire group, but this difference has been attributed to the learning curve of mastering the FlatWire technique. This article and supplemental video will demonstrate the technique of FlatWire Sternal Closure System. Briefly, the FlatWire is placed around the sternum, and the FlatWire end is fed through the security box. Once all of the wires are placed, the Figure 8 tensioning device is used to tighten each wire through the security box to the appropriate tensile force. Next, the FlatWires are rotated 90 degrees to hold the sternal position temporarily. Once sternal approximation is achieved, each FlatWire is twisted 120 degrees, and any excess length of the FlatWire is clipped.