RESUMO
Si/C yolk-shell structures have been developed to deal with the major issues associated with Si anodes: the huge volume changes and the low electrical conductivity. However, the fabrication process often involves expensive starting materials and/or simultaneously generates insulated SiC, which is harmful for Si anodes. Here, silica wastes from the optical fibers industry are used as starting materials to prepare high performance Si/C materials with Si@void@C yolk-shell structure via a rational designed Al2 O3 coating assisted magnesiothermic process. The obtained yolk-shell Si@void@C materials have a capacity of more than 1450 mA h g-1 after 100 cycles at 0.4 A g-1 . Thanks to the easily coated and removed Al2 O3 layer, the general formation of SiC can be avoided which is beneficial for improving the rate performances, and a capacity of ≈800 mA h g-1 is still kept after 200 cycles at a high rate of 10 A g-1 with a low capacity loss of 0.08% per cycle.
RESUMO
Amorphous silicon (a-Si), due to its satisfactory theoretical capacity, moderate discharge potential, and abundant reserves, is treated as one of the most prospective materials for the anode of sodium-ion batteries (SIBs). However, the slow Na+ diffusion kinetics, poor electrical conductivity, and rupture-prone structures of a-Si restrict its further development. In this work, a composite (a-Si@rGO) consisting of porous amorphous silicon hollow nanoboxes (a-Si HNBs) and reduced graphene oxide (rGO) is prepared. The a-Si HNBs are synthesized through "sodiothermic reduction" of silica hollow nanoboxes at a relatively low temperature, and the rGO is covered on the surface of the a-Si HNBs by electrostatic interaction. The as-synthesized composite anode applying in SIBs exhibits a high initial discharge capacity of 681.6 mAh g-1 at 100 mA g-1, great stability over 2000 cycles at 800 mA g-1, and superior rate performance (261.2, 176.8, 130.3, 98.4, and 73.3 mAh g-1 at 100, 400, 800, 1500, and 3000 mA g-1, respectively). The excellent electrochemical properties are ascribed to synergistic action of the porous hollow nanostructure of a-Si and the rGO coating. This research not only offers an innovative synthetic means for the development of a-Si in various fields but also provides a practicable idea for the design of other alloy-type anodes.
RESUMO
Phosphorus-rich iron phosphides (FeP2) have been regarded as excellent anode candidates for lithium storage owing to their low cost, high natural abundance, high theoretical capacity, and reasonable redox potential. However, FeP2 suffers from a few challenging problems such as low reversibility, fast capacity degradation, and big volume variation. Herein, we have designed and synthesized a 3D honeycomb-like carbon skeleton with embedded FeP2 nanoparticles (denoted as FeP2 NPs@CK), which can significantly promote the kinetics and maintain the structural stability during the cycling, resulting in an excellent electrochemical performance reflected by high reversibility and long-term cycling stability. FeP2 NPs@CK shows high reversibility, delivering a reversible capacity as high as 938 mA h g-1 at 0.5 A g-1. It also shows excellent cycling stability, delivering a capacity of 620 mA h g-1 after 500 cycles at 1 A g-1. Moreover, the fast kinetics and lithium storage mechanism of FeP2 NPs@CK are investigated by quantitative analysis and in situ X-ray diffraction. Such superior performance demonstrates that FeP2 NPs@CK could be a promising and attractive anode candidate for lithium storage.
RESUMO
Uncontrolled lithium dendrite growth and dramatic volume change during cycling have long been severely impeding the practical applications of Li metal as the ultimate anode. In this work, ultrathin MgF2 nanosheets encapsulated inside nitrogen-doped graphene-like hollow nanospheres (MgF2 NSs@NGHSs) are ingeniously fabricated to address these problems by a perfect combination of atomic layer deposition and chemical vapor deposition. The uniform and continuous Li-Mg solid-solution inner layer formed by the MgF2 nanosheets can reduce the nucleation overpotential and induce selective deposition of Li into the cavities of the NGHSs. Furthermore, the Li deposition behavior and mechanism of the hybrid host are comprehensively explored by in situ optical microscopy at the macroscopic level, in situ transmission electron microscopy at the microscopic level, and theoretical calculations at the atomic level, respectively. Benefiting from a synergistic modulation strategy of nanosheet seed-induced nucleation and Li-confined growth, the designed composite demonstrates an endurance of 590 cycles for asymmetric cells and a lifespan over 1330 h for corresponding symmetric cells. When applied in LiFePO4 full cells, it provides a reversible capacity of 90.6 mAh g-1 after 1000 cycles at 1 C.
RESUMO
Iron oxides are regarded as promising anodes for both lithium-ion batteries (LIBs) and potassium-ion batteries (KIBs) due to their high theoretical capacity, abundant reserves, and low cost, but they are also facing great challenges due to the sluggish reaction kinetics, low electronic conductivity, huge volume change, and unstable electrode interphases. Moreover, iron oxides are normally prepared at high temperature, forming large particles because of Ostwald ripening, and exhibiting low electronic/ionic conductivity and unfavorable mechanical stability. To address those issues, herein, we have synthesized ultra-small Fe3O4 nanodots encapsulated in layered carbon nanosheets (Fe3O4@LCS), using the coordination interaction between catechol and Fe3+, demonstrating fast reaction kinetics, high capacity, and typical capacitive-controlled electrochemical behaviors. Such Fe3O4@LCS nanocomposites were derived from coordination compounds with layered structures via van der Waals's force. Fe3O4@LCS-500 (annealed at 500 °C) nanocomposites have displayed attractive features of ultra-small particle size (â¼5 nm), high surface area, mesoporous and layered feature. When used as anodes, Fe3O4@LCS-500 nanocomposites delivered exceptional electrochemical performances of high reversible capacity, excellent cycle stability and rate performance for both LIBs and KIBs. Such exceptional performances are highly associated with features of Fe3O4@LCS-500 nanocomposites in shortening Li/K ion diffusion length, fast reaction kinetics, high electronic/ionic conductivity, and robust electrode interphase stability.
RESUMO
Compared to inorganic electrodes, organic materials are regarded as promising electrodes for lithium-ion batteries (LIBs) due to the attractive advantages of light elements, molecular-level structural design, fast electron/ion transferring, favorable environmental impacts, and flexible feature, etc. Not only specific capacities but also working potentials of organic electrodes are reasonably tuned by polymerization, electron-donating/withdrawing groups, and multifunctional groups as well as conductive additives, which have attracted intensive attention. However, organic LIBs (OLIBs) are also facing challenges on capacity loss, side reactions, electrode dissolution, low electronic conductivity, and short cycle life, etc. Many strategies have been applied to tackle those challenges, and many inspiring results have been achieved in the last few decades. In this review, we have introduced the basic concepts of LIBs and OLIBs, followed by the typical cathode and anode materials with various physicochemical properties, redox reaction mechanisms, and evolutions of functional groups. Typical charge-discharge behaviors and molecular structures of organic electrodes are displayed. Moreover, effective strategies on addressing problems of organic electrodes are summarized to give some guidance on the synthesis of optimized organic electrodes for practical applications of OLIBs.
RESUMO
Metallic zinc (Zn) has been considered to be an ideal anode material for aqueous batteries, but is impeded by the growth of Zn dendrites and its side reactions with an aqueous electrolyte. Here, it is reported that an artificial protective layer filled with novel 2D Zn2+ adsorbed Sb3 P2 O14 3- (denoted as Zn-Sb3 P2 O14 ) nanosheets provide an effective route to mitigate the above challenging problems. The Zn-Sb3 P2 O14 protection layer not only avoids the direct contact with the aqueous electrolyte to suppress the side reactions but also allows for Zn-ions to pass through the protection layer rapidly. Moreover, the 2D Sb3 P2 O14 3- skeleton with negative charge also confines the 2D diffusion of Zn-ion along the lateral surface of Zn anode, resulting in a uniform electron-deposition. This unique protection layer not only enables dendrite-free Zn plating/stripping with an average Coulombic efficiency of 99.2% for 200 cycles, but also sustains the symmetric Zn||Zn cell over 1300 h at 1 mA cm-2 and 1 mAh cm-2 as well as for 450 h at 10 mA cm-2 and 10 mAh cm-2 . Such advantages bring high reversibility to full Zn batteries with MnO2 cathodes, which deliver a discharge capacity of 111.7 mAh g-1 after 1000 cycles.
RESUMO
A much "greener" and harmless leaching method for removing impurity aluminum further from industrial quartz sands by very dilute mixed acids has been presented. With the help of supersonic, the percentage of removal aluminum reached up to 52.5%/53%, that is, 17.4 ppm/17.7 ppm at 30 °C/80 °C, respectively. These results are 4.4/4.7 ppm lower than that supplied by a world famous quartz sands supplier, and the leaching conditions are much milder compared with other comparable methods: the concentration of hydrogen chloride in the mixed acid is only 10% of the others, the leaching temperature is much lower; at the same time, the operating time is only 13-20% of the others, thereby pollution of industrial strong acids and thermo-scattering is reduced substantially.
Assuntos
Quartzo/isolamento & purificação , Ácido Clorídrico/químicaRESUMO
Designing yolk-shell nanostructures is an effective way of addressing the huge volume expansion issue for large-capacity anode and cathode materials in Li-ion batteries (LIBs). Previous studies mainly focused on adopting a SiO2 template through HF etching to create yolk-shell nanostructures. However, HF etching is highly corrosive and may result in a significant reduction of Si content in the composite. Herein, a silkworm cocoon-like silicon-based composite is prepared through a green approach in which Al2O3 was selected as a sacrificial template. The void space between the outer nitrogen-doped carbon (NC) shell formed by chemical vapor deposition using a pyridine precursor and the inside porous silicon nanorods (p-Si NRs) synthesized by magnesiothermic reduction of ordered mesoporous silica nanorods can be generated by etching Al2O3 with diluted HCl. The obtained p-Si NRs@void@NC composite is utilized as an anode material for LIBs, which exhibits a large initial discharge capacity of 3161 mAh g-1 at 0.5 A g-1, excellent cycling behavior up to 300 cycles, and super rate performance. Furthermore, a deep understanding of the mechanism for the yolk-shell nanostructure during the Li-alloying process is revealed by in situ transmission electron microscopy and finite element simulation.
RESUMO
In this work, hydroquinone resin was used to grow carbon nanotubes directly on Ni foam. The composites were obtained via a simple carbonization method, which avoids using the explosive gaseous carbon precursors that are usually applied in the chemical vapor deposition method. When evaluated as cathode for Li-O2 batteries, the binder-free structure showed enhanced ORR/OER activities, thus giving a high rate capability (12690 mAh g(-1) at 200 mA g(-1) and 3999 mAh g(-1) at 2000 mA g(-1)) and outstanding long-term cycling stability (capacity limited 2000 mAh g(-1), 110 cycles at 200 mA g(-1)). The excellent battery performance provides new insights into designing a low-cost and high-efficiency cathode for Li-O2 batteries.
RESUMO
A novel binder-free electrode for lithium-oxygen batteries has been prepared by electrodepositing a Co3O4 layer onto a pretreated TiO2 fiber mesh, formed on nickel foam by an electrospinning method. The Co3O4 depositing layer is composed of Co3O4 nanoflakes, forming a uniform flower-like porous structure. The Co3O4 nanoflakes within the depositing layer provide a large amount of catalytic active sites for oxygen evolution and reduction reactions. The three-dimensional porous network of the Co3O4 depositing layer can not only facilitate the transportation of ions and electrolyte within the electrode, but also provide plenty of space to accommodate Li2O2 species formed during the discharge process. The Co3O4 spheres embedded in the TiO2 fiber mesh, formed by the treatment of a suspension of cobaltammine precipitate, function as anchors to prevent the detachment of the Co3O4 layer from the current collector, resulting in excellent structural and cycling stability. Only a slight specific capacity decay is observed at full discharge/charge after 80 cycles. This work demonstrates the important factors in the preparation of binder-free cathodes for high performance lithium-oxygen batteries.
RESUMO
Mixed oxide SnO2-Fe2O3 porous nanocubes were prepared by simply annealing the precursor of Sn3[Fe(CN)6]4 nanocubes, which were obtained through a facile solvothermal method. Calcination of the precursor at 350 °C produced uniform SnO2-Fe2O3 nanocubes without obvious morphological deformation, but with lots of open void space in the nanocubes. The Brunauer-Emmett-Teller N2 adsorption-desorption analysis shows that the as-synthesized SnO2-Fe2O3 has a specific surface area of 170.2 m(2) g(-1) with a pore size of around 5 nm. The porous SnO2-Fe2O3 nanocubes as anode materials for the lithium-ion battery show a high initial capacity of 1020.2 mA h g(-1) at a current density of 200 mA g(-1) and maintain at 567.5 mA h g(-1) at the 50th cycle, which is distinctly higher than those reported for SnO2-based materials. The enhanced performance towards lithium storage can be ascribed to the high specific area, an appropriate pore size and the synergistic effect of SnO2 and Fe2O3.
RESUMO
Uniform porous silicon hollow nano-spheres are prepared without any sacrificial templates through a magnesio-thermic reduction of mesoporous silica hollow nanospheres and surface modified by the following in situ chemical polymerization of polypyrrole. The porous hollow structure and polypyrrole coating contribute significantly to the excellent structure stability and high electrochemical performance of the nanocomposite.
RESUMO
Sn/SnO nanoparticles are incorporated in crumpled nitrogen-doped graphene nanosheets by a simple melting diffusion method. The resulting composite exhibits large specific capacity, excellent cycling stability and high rate capability as an anode for lithium-ion batteries.
RESUMO
Stacking various two-dimensional atomic crystals on top of each other is a feasible approach to create unique multilayered heterostructures with desired properties. Herein for the first time, we present a controlled preparation of large-area graphene/MoS2 heterostructures via a simple heating procedure on Mo-oleate complex coated sodium sulfate under N2 atmosphere. Through a direct in situ catalytic reaction, graphene layer has been uniformly grown on the MoS2 film formed by the reaction of Mo species with Species, which is from the carbothermal reduction of sodium sulfate. Due to the excellent graphene "painting" on MoS2 atomic layers, the significantly shortened lithium ion diffusion distance and the markedly enhanced electronic conductivity, these multilayered graphene/MoS2 heterostructures exhibit high specific capacity, unprecedented rate performance and outstanding cycling stability, especially at a high current density, when used as an anode material for lithium batteries. This work provides a simple but efficient route for the controlled fabrication of large-area multilayered graphene/metal sulfide heterostructures with promising applications in battery manufacture, electronics or catalysis.
RESUMO
A sodiothermic reduction method has been developed for the preparation of porous silicon using aluminosilicate zeolite NaY as a precursor. The porous silicon with a specific surface area of approximately 570 m(2) g(-1) shows distinct capacitive behavior when used as an electrode material for supercapacitors.
Assuntos
Capacitância Elétrica , Silício/química , Silicatos de Alumínio/química , Técnicas Eletroquímicas , Eletrodos , Oxirredução , Porosidade , Propriedades de Superfície , Zeolitas/químicaRESUMO
This paper deals with the removal of iron from silica sand in aqueous oxalic acid, in the absence and presence of ultrasound. The parameters investigated were the reaction temperature, stirring speed, ultrasound power, acid concentration and reaction time. The optimum conditions for the maximum removal of 75.4% of iron with ultrasound were determined as follows: reaction temperature, 95°C; stirring speed, 500 rpm; ultrasound power, 150 W; acid concentration, 4 g/l; reaction time 30 min. The method induces a remarkable acceleration for the iron leaching process, the leach acid concentration reducing dramatically and the removal efficiency increasing considerably, compared to conventional stirring method. The advantages of ultrasound-assisted leaching were also confirmed by characterizing the silica sand and the leached solid samples using particle size, SEM and color measurement analysis.