Time- and Spectrally-Resolved Photoluminescence Study of Alloyed CdxZn1-xSeyS1-y/ZnS Quantum Dots and Their Nanocomposites with SPIONs in Living Cells.

Magnetic-luminescent composites based on semiconductor quantum dots (QDs) and superparamagnetic iron oxide nanoparticles (SPIONs) can serve as a platform combining visualization and therapy. Here, we report the construction of QD-SPION nanocomposites based on synthesized SPIONs and alloyed QDs (CdxZn1-xSeyS1-y)/ZnS solubilized with L-cysteine molecules. The study of the spectral-luminescence characteristics, the kinetics of luminescence decay show the composite's stability in a solution. After incubation with HeLa cells, QDs, SPIONs, and their composites form clusters on the cell surface and associate with endosomes inside the cells. Component-wise analysis of the photoluminescence decay of cell-associated QDs/SPIONs provides information about their localization and aggregate status.

Luminescence enhancement of alloyed quantum dots bound to gold nanoparticles by mercaptocarboxylic acids in colloidal complexes.

The understanding of the physical mechanisms of the nanoobjects interaction within the nanostructured complex materials is one of the main tasks for the development of novel materials with tunable properties. In this work, we develop a formation procedure of the colloidal complexes based on alloyed CdZnSe/ZnS quantum dots and gold nanoparticles where the various mercaptocarboxylic acids are used as the binding molecules. The QD photoluminescence enhancement (up to ×3.1) can be achieved by the control of the interparticle distance in colloidal solutions. We provide a detailed discussion on the influence of the linking molecules on the nanoparticle complexes optical parameters through the steady-state and time-resolved spectral measurements.

Time-resolved FRET in AgInS2/ZnS-CdSe/ZnS quantum dot systems.

The fast and accurate detection of disease-related biomarkers and potentially harmful analytes in different matrices is one of the main challenges in the life sciences. In order to achieve high signal-to-background ratios with frequently used photoluminescence techniques, luminescent reporters are required that are either excitable in the first diagnostic window or reveal luminescence lifetimes exceeding that of autofluorescent matrix components. Here, we demonstrate a reporter concept relying on broad band emissive ternary quantum dots (QDs) with luminescence lifetimes of a few hundred nanoseconds utilized for prolongating the lifetimes of organic or inorganic emitters with lifetimes in the order of a very few 10 ns or less through fluorescence resonant energy transfer. Using spectrally resolved and time-resolved measurements of the system optical response we demonstrate the potential of lifetime multiplexing with such systems exemplarily for AgInS2/ZnS and CdSe/ZnS QDs.

Enhanced stability of the optical responses from all-inorganic perovskite nanocrystals embedded in a synthetic opal matrix.

Nanostructured luminescent materials based on perovskite nanocrystals (p-NCs) are attractive since their optical properties can be tuned in a wide spectral range with high luminescence quantum yields and lifetimes, however, they lack stability. In this work, the optical properties of highly luminescent colloidal p-NCs (CsPbX3, where X = Cl/Br, Br, I) embedded in porous opal matrices are presented. It is shown that the photoluminescence of the p-NCs embedded into opal matrices possess increased longtime stability of its spectral and kinetic parameters under ambient conditions. LEDs based on the developed materials show pure color p-NC emission with stability of its parameters. The results of this work may expand the knowledge of interactions between luminescent nanoparticles within multicomponent nanostructured materials for further photonic applications.

Optical properties of ordered superstructures formed from cadmium and lead chalcogenide colloidal nanocrystals.

The optical properties of three-dimensional ordered superstructures formed on glass substrates by self-assembly of cadmium selenide or lead sulfide nanocrystals (NCs) are investigated and compared to the optical properties of the initial NC colloidal solutions. The formation of the superstructures is strongly correlated to the presence of oleic acid molecules on the surface of the NCs. It is found that the absorption band of the NCs in the superstructures is broadened and shifted to shorter wavelengths in comparison with the absorption band of the NCs in solution. The luminescence spectra of the NCs in the superstructures also differ from the spectra of the NCs in solution. The observed modification of optical properties of superstructures is a manifestation of interactions between the NCs and the chemical environment within the superstructures.

Magneto-Luminescent Nanocomposites Based on Carbon Dots and Ferrite with Potential for Bioapplication.

Multifunctional nanocomposites that combine both magnetic and photoluminescent (PL) properties provide significant advantages for nanomedical applications. In this work, a one-stage synthesis of magneto-luminescent nanocomposites (MLNC) with subsequent stabilization is proposed. Microwave synthesis of magnetic carbon dots (M-CDs) was carried out using precursors of carbon dots and magnetic nanoparticles. The effect of stabilization on the morphological and optical properties of nanocomposites has been evaluated. Both types of nanocomposites demonstrate magnetic and PL properties simultaneously. The resulting MLNCs demonstrated excellent solubility in water, tunable PL with a quantum yield of up to 28%, high photostability, and good cytocompatibility. Meanwhile, confocal fluorescence imaging showed that M-CDs were localized in the cell nuclei. Consequently, the multifunctional nanocomposites M-CDs are promising candidates for bioimaging and therapy.

Nanostructured Luminescent Gratings for Sensorics.

Two-dimensional holographic structures based on photopolymer compositions with luminescent nanoparticles, such as quantum dots, are promising candidates for multiresponsive luminescence sensors. However, their applicability may suffer from the incompatibility of the components, and hence aggregation of the nanoparticles. We showed that the replacement of an organic shell at the CdSe/ZnS quantum dots' surface with monomer molecules of the photopolymerizable medium achieved full compatibility with the surrounding medium. The effect was demonstrated by luminescence spectroscopy, and steady-state and time-resolved luminescent laser scanning microscopy. We observed the complete spectral independence of local photoluminescence decay, thus proving the absence of even nanoscale aggregation, either in the liquid composition or in the nodes and antinodes of the grating. Therefore, nanostructured luminescent photopolymer gratings with monomer-covered quantum dots can act as hybrid diffractive-luminescent sensor elements.

3D assembly of semiconductor and metal nanocrystals: hybrid CdTe/Au structures with controlled content.

A 3D metal ion assisted assembly of nanoparticles has been developed. The approach relies on the efficient complexation of cadmium ions and 5-mercaptomethyltetrazole employed as the stabilizer of both colloidal CdTe and Au nanoparticles. It enables in a facile way the formation of hybrid metal-semiconductor 3D structures with controllable and tunable composition in aqueous media. By means of critical point drying, these assemblies form highly porous aerogels. The hybrid architectures obtained are characterized by electron microscopy, nitrogen adsorption, and optical spectroscopy methods.

One-phase synthesis of gold nanoparticles with varied solubility.

We developed a straightforward synthesis of gold nanoparticles with diameters in the range 2.1-7.0 nm which display solubility in both aqueous and nonpolar (toluene, chloroform) media. This versatile solubility of the nanoparticles is achieved by the use of a thiolated PEG capping agent. Their plasmon resonance band is virtually unaltered in different media.

Bactericidal Activity of Multilayered Hybrid Structures Comprising Titania Nanoparticles and CdSe Quantum Dots under Visible Light.

Titania nanoparticle/CdSe quantum dot hybrid structures are a promising bactericidal coating that exhibits a pronounced effect against light-sensitive bacteria. Here, we report the results of a comprehensive study of the photophysical properties and bactericidal functionality of these hybrid structures on various bacterial strains. We found that our structures provide the efficient generation of superoxide anions under the action of visible light due to electron transfer from QDs to titania nanoparticles with ~60% efficiency. We also tested the antibacterial activity of hybrid structures on five strains of bacteria. The formed structures combined with visible light irradiation effectively inhibit the growth of Escherichia coli, Bacillus subtilis, and Mycobacterium smegmatis bacteria, the last of which is a photosensitive causative agent model of tuberculosis.

Amphiphilic and magnetic behavior of Fe3O4 nanocrystals.

Fe(3)O(4) (magnetite) nanocrystals with an average size of 13 nm were prepared using a specially synthesized polymeric stabilizer (poly-4-vinylpyridine-co-acrylamidoethylamine-co-polyethyleneglycol-co-polyethyleneglycolic acid) that bears reactive groups for further functionalization. The polymer shell made the nanocrystals amphiphilic, i.e. they are soluble in pentanol, water and dichloromethane, and they distribute over the three solvents in a three phase system. The Fe(3)O(4) nanocrystals exhibited the well-known and typical magnetic properties.

Magneto-Fluorescent Hybrid Sensor CaCO3-Fe3O4-AgInS2/ZnS for the Detection of Heavy Metal Ions in Aqueous Media.

Heavy metal ions are not subject to biodegradation and could cause the environmental pollution of natural resources and water. Many of the heavy metals are highly toxic and dangerous to human health, even at a minimum amount. This work considered an optical method for detecting heavy metal ions using colloidal luminescent semiconductor quantum dots (QDs). Over the past decade, QDs have been used in the development of sensitive fluorescence sensors for ions of heavy metal. In this work, we combined the fluorescent properties of AgInS2/ZnS ternary QDs and the magnetism of superparamagnetic Fe3O4 nanoparticles embedded in a matrix of porous calcium carbonate microspheres for the detection of toxic ions of heavy metal: Co2+, Ni2+, and Pb2+. We demonstrate a relationship between the level of quenching of the photoluminescence of sensors under exposure to the heavy metal ions and the concentration of these ions, allowing their detection in aqueous solutions at concentrations of Co2+, Ni2+, and Pb2+ as low as ≈0.01 ppm, ≈0.1 ppm, and ≈0.01 ppm, respectively. It also has importance for application of the ability to concentrate and extract the sensor with analytes from the solution using a magnetic field.

Investigation of Magnetic Circular Dichroism Spectra of Semiconductor Quantum Rods and Quantum Dot-in-Rods.

Anisotropic quantum nanostructures have attracted a lot of attention due to their unique properties and a range of potential applications. Magnetic circular dichroism (MCD) spectra of semiconductor CdSe/ZnS Quantum Rods and CdSe/CdS Dot-in-Rods have been studied. Positions of four electronic transitions were determined by data fitting. MCD spectra were analyzed in the A and B terms, which characterize the splitting and mixing of states. Effective values of A and B terms were determined for each transition. A relatively high value of the B term is noted, which is most likely associated with the anisotropy of quantum rods.

Biomimetic drug delivery platforms based on mesenchymal stem cells impregnated with light-responsive submicron sized carriers.

Synthetic organic and inorganic carriers often have limitations associated with problematic targeting ability or non-optimized pharmacokinetics, and, therefore, they have restricted therapeutic potential. Natural drug carriers (e.g. mesenchymal stem cells, MSCs) are able to migrate towards the tumor site and penetrate cancerous cells. These biomimetic features make MSCs an attractive delivery platform that allows achieving maximal therapeutic efficiency with minimal toxic side effects. A combination of MSCs exhibiting a homing effect on tumors with stimuli-responsive nanostructured carriers is foreseen to have a huge impact in the field of personalized oncology. Here we develop for the first time a light-sensitive biomimetic delivery platform based on MSCs impregnated with submicron sized composite capsules containing an antitumor drug. This cell-based delivery system triggers the release of the drug upon near-infrared (NIR) laser irradiation due to gold nanorods (Au NRs) incorporated into the capsule wall. The NIR-triggered release of the antitumor drug such as vincristine leads to the effective mortality of tumor spheroids made of primary melanoma cells. Encapsulated vincristine delivered by MSCs into the tumor spheroids and deployed over the whole spheroid upon NIR exposure represents a promising therapy for the improved treatment of malignant neoplasms.

Ligand-Assisted Formation of Graphene/Quantum Dot Monolayers with Improved Morphological and Electrical Properties.

Hybrid nanomaterials based on graphene and PbS quantum dots (QDs) have demonstrated promising applications in optoelectronics. However, the formation of high-quality large-area hybrid films remains technologically challenging. Here, we demonstrate that ligand-assisted self-organization of covalently bonded PbS QDs and reduced graphene oxide (rGO) can be utilized for the formation of highly uniform monolayers. After the post-deposition ligand exchange, these films demonstrated high conductivity and photoresponse. The obtained films demonstrate a remarkable improvement in morphology and charge transport compared to those obtained by the spin-coating method. It is expected that these materials might find a range of applications in photovoltaics and optoelectronics.

Influence of the solvent environment on luminescent centers within carbon dots.

Carbon dots (CDs) are luminescent nanomaterials, with potential use in bioimaging and sensorics. Here, the influence of the surrounding solvent media on the optical properties of CDs synthesized from the most commonly employed precursors, namely citric acid and ethylenediamine, is investigated. The position of optical transitions of CDs can be tuned by the change of pH and solvent polarity. The most striking observation is related to the interaction of CDs with chlorine containing solvents, which results in resolving a set of narrow peaks within both the absorption and PL bands, similar to those observed for polycyclic aromatic hydrocarbons or organic dyes. We assume that the chlorine containing molecules penetrate the surface layers of CDs, which results in an increase of the distance between the luminescent centers; this correlates well with an enhanced D-band in their Raman spectra. A model of CDs composed of a matrix of hydrogenated amorphous carbon with the inclusions of sp2-domains formed by polycyclic aromatic hydrocarbons and their derivatives is suggested; the latter are stacked ensembles of the luminophores and are considered as the origin of the emission of CDs.

Functionalized rGO Interlayers Improve the Fill Factor and Current Density in PbS QDs-Based Solar Cells.

Graphene-quantum dot nanocomposites attract significant attention for novel optoelectronic devices, such as ultrafast photodetectors and third-generation solar cells. Combining the remarkable optical properties of quantum dots (QDs) with the exceptional electrical properties of graphene derivatives opens a vast perspective for further growth in solar cell efficiency. Here, we applied (3-mercaptopropyl) trimethoxysilane functionalized reduced graphene oxide (f-rGO) to improve the QDs-based solar cell active layer. The different strategies of f-rGO embedding are explored. When f-rGO interlayers are inserted between PbS QD layers, the solar cells demonstrate a higher current density and a better fill factor. A combined study of the morphological and electrical parameters of the solar cells shows that the improved efficiency is associated with better layer homogeneity, lower trap-state densities, higher charge carrier concentrations, and the blocking of the minor charge carriers.

Investigation of AgInS2/ZnS Quantum Dots by Magnetic Circular Dichroism Spectroscopy.

Over recent years, quantum dots (QDs) based on ternary metal dichalcogenides have attracted a lot of attention due to their unique properties and a range of potential applications. Here, we review the latest studies on the optical properties of AgInS2/ZnS QDs with emphasis on their theoretical modeling, and present our investigations of electronic transitions invisible in unstructured absorption spectra of AgInS2/ZnS QDs. The analysis of the absorption, photoluminescence excitation (PLE), and magnetic circular dichroism (MCD) spectra of hydrophobic and hydrophilic AgInS2/ZnS QDs of different sizes enables us to determine positions of electron transitions in these QDs. We demonstrate that the use of the second derivative of PLE spectra provides more unequivocal data on the position of the energy transitions compared with the second derivative of absorption spectra. Analysis of the MCD spectra reveals that the magnetic field induces energy level mixing in AgInS2/ZnS QDs in contrast to the traditional Cd-based QDs, where MCD is associated only with removing degeneracy of the excited energy level.

Optical Properties, Morphology, and Stability of Iodide-Passivated Lead Sulfide Quantum Dots.

Iodide atomic surface passivation of lead chalcogenides has spawned a race in efficiency of quantum dot (QD)-based optoelectronic devices. Further development of QD applications requires a deeper understanding of the passivation mechanisms. In the first part of the current study, we compare optics and electrophysical properties of lead sulfide (PbS) QDs with iodine ligands, obtained from different iodine sources. Methylammonium iodide (MAI), lead iodide (PbI2), and tetrabutylammonium iodide (TBAI) were used as iodine precursors. Using ultraviolet photoelectron spectroscopy, we show that different iodide sources change the QD HOMO/LUMO levels, allowing their fine tuning. AFM measurements suggest that colloidally-passivated QDs result in formation of more uniform thin films in one-step deposition. The second part of this paper is devoted to the PbS QDs with colloidally-exchanged shells (i.e., made from MAI and PbI2). We especially focus on QD optical properties and their stability during storage in ambient conditions. Colloidal lead iodide treatment is found to reduce the QD film resistivity and improve photoluminescence quantum yield (PLQY). At the same time stability of such QDs is reduced. MAI-treated QDs are found to be more stable in the ambient conditions but tend to agglomerate, which leads to undesirable changes in their optics.

Porous flower-like superstructures based on self-assembled colloidal quantum dots for sensing.

Quantum dots (QDs) have been envisaged as very promising materials for the development of advanced optical sensors. Here we report a new highly porous luminescent material based on colloidal QDs for potential applications in optical sensing devices. Bulk flower-like porous structures with sizes of hundreds of microns have been produced by slow destabilization of QD solution in the presence of a non-solvent vapor. The porous highly luminescent material was formed from CdSe QDs using the approach of non-solvent destabilization. This material demonstrated a 4-fold decrease in PL signal in the presence of the ammonia vapor. The relationship between the destabilization rate of QDs in solution and the resulting morphology of structural elements has been established. The proposed model of bulk porous flower-like nanostructured material fabrication can be applied to nanoparticles of different nature combining their unique properties. This research opens up a new approach to design novel multi-component composite materials enabling potential performance improvements of various photonic devices.