Highly Stereoselective Heterogeneous Diene Polymerization by Co-MFU-4l: A Single-Site Catalyst Prepared by Cation Exchange.

Molecular catalysts offer tremendous advantages for stereoselective polymerization because their activity and selectivity can be optimized and understood mechanistically using the familiar tools of organometallic chemistry. Yet, this exquisite control over selectivity comes at an operational price that is generally not justifiable for the large-scale manufacture of polyfolefins. In this report, we identify Co-MFU-4l, prepared by cation exchange in a metal-organic framework, as a solid catalyst for the polymerization of 1,3-butadiene with high stereoselectivity (>99% 1,4-cis). To our knowledge, this is the highest stereoselectivity achieved with a heterogeneous catalyst for this transformation. The polymer's low polydispersity (PDI ≈ 2) and the catalyst's ready recovery and low leaching indicate that our material is a structurally resilient single-site heterogeneous catalyst. Further characterization of Co-MFU-4l by X-ray absorption spectroscopy provided evidence for discrete, tris-pyrazolylborate-like coordination of Co(II). With this information, we identify a soluble cobalt complex that mimics the structure and reactivity of Co-MFU-4l, thus providing a well-defined platform for studying the catalytic mechanism in the solution phase. This work underscores the capacity for small molecule-like tunability and mechanistic tractability available to transition metal catalysis in metal-organic frameworks.

Silicon oxycarbide-antimony nanocomposites for high-performance Li-ion battery anodes.

Silicon oxycarbide (SiOC) has recently regained attention in the field of Li-ion batteries, owing to its effectiveness as a host matrix for nanoscale anode materials alloying with Li. The SiOC matrix, itself providing a high Li-ion storage capacity of 600 mA h g-1, assists in buffering volumetric changes upon lithiation and largely suppresses the formation of an unstable solid-electrolyte interface. Herein, we present the synthesis of homogeneously embedded Sb nanoparticles in a SiOC matrix with the size of 5-40 nm via the pyrolysis of a preceramic polymer. The latter is obtained through the Pt-catalyzed gelation reaction of Sb 2-ethylhexanoate and a poly(methylhydrosiloxane)/divinylbenzene mixture. The complete miscibility of these precursors was achieved by the functionalization of poly(methylhydrosiloxane) with apolar divinyl benzene side-chains. We show that anodes composed of SiOC/Sb exhibit a high rate capability, delivering charge storage capacity in the range of 703-549 mA h g-1 at a current density of 74.4-2232 mA g-1. The impact of Sb on the Si-O-C bonding and on free carbon content of SiOC matrix, along with its concomitant influence on Li-ion storage capacity of SiOC was assessed by Raman and 29Si and 7Li solid-state NMR spectroscopies.

Copper sulfide nanoparticles as high-performance cathode materials for Mg-ion batteries.

Rechargeable magnesium batteries are appealing as safe, low-cost systems with high-energy-density storage that employ predominantly dendrite-free magnesium metal as the anode. While significant progress has been achieved with magnesium electrolytes in recent years, the further development of Mg-ion batteries, however, is inherently limited by the lack of suitable cathode materials, mainly due to the slow diffusion of high-charge-density Mg-ions in the intercalation-type host structures and kinetic limitations of conversion-type cathodes that often causes poor cyclic stability. Nanostructuring the cathode materials offers an effective means of mitigating these challenges, due to the reduced diffusion length and higher surface areas. In this context, we present the highly reversible insertion of Mg-ions into nanostructured conversion-type CuS cathode, delivering high capacities of 300 mAh g-1 at room temperature and high cyclic stability over 200 cycles at a current density of 0.1 A g-1 with a high coulombic efficiency of 99.9%. These materials clearly outperform bulk CuS, which is electrochemically active only at an elevated temperature of 50 °C. Our results not only point to the important role of nanomaterials in the enhancement of the kinetics of conversion reactions but also suggest that nanostructuring should be used as an integral tool in the exploration of new cathodes for multivalent, i.e., (Mg, Ca, Al)-ion batteries.

Zeolite-Templated Carbon as the Cathode for a High Energy Density Dual-Ion Battery.

Dual-ion batteries (DIBs) are electrochemical energy storage devices that operate by the simultaneous participation of two different ion species at the anode and cathode and rely on the use of an electrolyte that can withstand the high operation potential of the cathode. Under such conditions at the cathode, issues associated with the irreversible capacity loss and the formation of solid-electrolyte interphase at the surface of highly porous electrode materials are far less significant than at lower potentials, permitting the exploration of high surface area, permanently porous framework materials as effective charge storage media. This concept is investigated herein by employing zeolite-templated carbon (ZTC) as a cathode in a dual-ion battery based on a potassium bis(fluorosulfonyl)imide (KFSI) electrolyte. Anion (FSI-) insertion within the pore network during electrochemical cycling is confirmed by NMR spectroscopy, and the maximum charge capacity is found to be proportional to surface area and micropore volume by comparison to other microporous carbon materials. Full cells based on ZTC as the cathode exhibit both high specific energy (up to 176 Wh kg-1, 79.8 Wh L-1) and high specific power (up to 3945 W kg-1, 1095 W L-1), stable cycling performance over hundreds of cycles, and reversibility within the potential range of 2.65-4.7 V versus K/K+.

Silicon Oxycarbide-Tin Nanocomposite as a High-Power-Density Anode for Li-Ion Batteries.

Tin-based materials are an emerging class of Li-ion anodes with considerable potential for use in high-energy-density Li-ion batteries. However, the long-lasting electrochemical performance of Sn remains a formidable challenge due to the large volume changes occurring upon its lithiation. The prevailing approaches toward stabilization of such electrodes involve embedding Sn in the form of nanoparticles (NPs) in an active/inactive matrix. The matrix helps to buffer the volume changes of Sn, impart better electronic connectivity and prevent particle aggregation upon lithiation/delithiation. Herein, facile synthesis of Sn NPs embedded in a SiOC matrix via the pyrolysis of a preceramic polymer as a single-source precursor is reported. This polymer contains Sn 2-ethyl-hexanoate (Sn(Oct)2) and poly(methylhydrosiloxane) as sources of Sn and Si, respectively. Upon functionalization with apolar divinyl benzene sidechains, the polymer is rendered compatible with Sn(Oct)2. This approach yields a homogeneous dispersion of Sn NPs in a SiOC matrix with sizes on the order of 5-30 nm. Anodes of the SiOC/Sn nanocomposite demonstrate high capacities of 644 and 553 mAh g-1 at current densities of 74.4 and 2232 mA g-1 (C/5 and 6C rates for graphite), respectively, and show superior rate capability with only 14% capacity decay at high currents.

Zeolite-Templated Carbon as a Stable, High Power Magnesium-Ion Cathode Material.

One strategy to overcome the slow kinetics associated with electrochemical magnesium ion storage is to employ a permanently porous, capacitive cathode material together with magnesium metal as the anode. This strategy has begun to be employed, for example, using framework solids like Prussian blue analogues or porous carbons derived from metal-organic frameworks, but the cycling stability of an ordered, bottom-up synthesized, three-dimensional carbon framework toward magnesiation and demagnesiation in a shuttle-type battery remains unexplored. Zeolite-templated carbons (ZTCs) are a class of ordered porous carbonaceous framework materials with numerous superlative properties relevant to electrochemical energy storage. Herein, we report that ZTCs can serve as high-power cathode materials for magnesium-ion hybrid capacitors (MHCs), exhibiting high specific capacities (e.g., 113 mA h g-1 after 100 cycles) with an average discharge voltage of 1.44 V and exceptional capacity retention (e.g., 76% after 200 cycles). ZTC-based MHCs meet or exceed the gravimetric energy densities of state-of-the-art batteries functioning on the Mg2+ shuttle, while simultaneously displaying far superior rate capabilities (e.g., 834 W kg-1 at 600 mA g-1).