RESUMO
BACKGROUND: Cassava retting ability and the textural qualities of cooked fufu are important quality traits. Cassava retting is a complex process in which soaking causes tissue breakdown, starch release, and softening. The rate at which various traits linked to it evolve varies greatly during fufu processing. According to the literature, there is no standard approach for determining retting ability. The retting indices and textural properties of fufu were measured using both manual and instrumental approaches. RESULTS: Different protocols were developed to classify 64 and 11 cassava genotypes into various groups based on retting ability and textural qualities, respectively. The retting protocols revealed considerable genetic dissimilarities in genotype classification: foaming ability and water clarity should be measured at 24 h, while penetrometer, hardness, turbidity, pH, and total titratable acidity data are best collected after 36 h. The stepwise regression model revealed that pH, foaming ability, and dry matter content are the best multivariates (with the highest R2) for predicting cassava retting. These predictors were used to develop an index for assessing the retting ability of cassava genotypes. The retting index developed showed a significant relationship with dry matter content and fufu yield. The study also showed significant correlations between instrumental cohesiveness and sensory smoothness (r = -0.75), moldability (r = -0.62), and stretchability (r = 0.78). Instrumental cohesiveness can correctly estimate fufu smoothness (R2 = 0.56, P = 0.008) and stretchability (R2 = 0.60, P = 0.005). CONCLUSION: pH, foaming ability, and dry matter content are the best traits for predicting cassava retting ability, while instrumental cohesiveness can effectively estimate fufu smoothness and stretchability. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
Assuntos
Manihot , Melhoramento Vegetal , Manihot/química , Manihot/genética , Manihot/metabolismo , Genótipo , Culinária , Tubérculos/química , Tubérculos/metabolismo , Amido/metabolismo , Amido/química , Farinha/análise , Manipulação de Alimentos/métodosRESUMO
BACKGROUND: Consumers of boiled cassava in Africa, Latin America and Asia use specific preference criteria to evaluate its cooking quality, in terms of texture, colour and taste. To improve adoption rates of improved cassava varieties intended for consumption after boiling, these preference criteria need to be determined, quantified and integrated as post-harvest quality traits in the target product profile of boiled cassava, so that breeding programs may screen candidate varieties based on both agronomic traits and consumer preference traits. RESULTS: Surveys of various end-user groups identified seven priority quality attributes of boiled cassava covering root preparation, visual aspect, taste and texture. Three populations of contrasted cassava genotypes, from good-cooking to bad-cooking, in three countries (Uganda, Benin, Colombia) were then characterized according to these quality attributes by sensory quantitative descriptive analysis (QDA) and by standard instrumental methods. Consumers' preferences of the texture attributes mealiness and hardness were also determined. By analysis of correlations, the consumers' preferences scores were translated into thresholds of acceptability in terms of QDA scores, then in terms of instrumental measurements (water absorption during boiling and texture analysis). The thresholds of acceptability were used to identify among the Colombian and Benin populations promising genotypes for boiled cassava quality. CONCLUSION: This work demonstrates the steps of determining priority quality attributes for boiled cassava and establishing their corresponding quantitative thresholds of acceptability. The information can then be included in boiled cassava target product profiles used by cassava breeders, for better selection and adoption rates of new varieties. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
Assuntos
Comportamento do Consumidor , Culinária , Genótipo , Manihot , Paladar , Manihot/genética , Manihot/química , Humanos , Colômbia , BeninRESUMO
Crop breeding in sub-Saharan Africa has made considerable gains; however, postharvest and food-related preferences have been overlooked, in addition to how these preferences vary by gender, social difference and context. This context is changing as participatory approaches using intersectional gender and place-based methods are beginning to inform how breeding programmes make decisions. This article presents an innovative methodology to inclusively and democratically prioritise food quality traits of root, tuber and banana crops based on engagement with food systems actors and transdisciplinary collaboration. The outcome of the methodology is the Gendered Food Product Profile (GFPP) - a list of prioritised food quality characteristics - to support breeders to make more socially inclusive decisions on the methods for trait characterisation to select genotypes closer to the needs of food system actors. This article reviews application of the methodology in 14 GFPPs, presents illustrative case studies and lessons learned. Key lessons are that the transdisciplinary structure and the key role of social scientists helped avoid reductionism, supported co-learning, and the creation of GFPPs that represented the diverse interests of food system actors, particularly women, in situ. The method partially addressed power dynamics in multidisciplinary decision making; however, effectiveness was dependent on equitable team relations and supportive institutions committed to valuing plural forms of knowledge. Actions to address power asymmetries that privilege particular types of knowledge and voices in decision making are crucial in techno-science projects, along with opportunities for co-learning and long-term collaboration and a transdisciplinary structure at higher level. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
Assuntos
Produtos Agrícolas , Tomada de Decisões , Humanos , Feminino , Masculino , Produtos Agrícolas/crescimento & desenvolvimento , Melhoramento Vegetal , Musa/química , África Subsaariana , Comportamento CooperativoRESUMO
BACKGROUND: Orange-fleshed sweet potato (OFSP) is bio-fortified with vitamin A precursors through breeding and is thus ideal for combating vitamin A deficiency (VAD). One of the potential mechanisms to promote the consumption of OFSP is to enhance its availability through processing into products with a longer shelf life and more desirable to consumers. However, very few farmers and agro-processors practice value addition due to market uncertainties; there is little information on market availability for OFSP products. This study examined consumers' preference for OFSP puree chapati in rural and urban areas of Kenya, using the contingent valuation method. Data was collected from a random sample of 411 sweet potato consumers and a double-bounded logit model was applied to analyze consumers' willingness to pay (WTP) for OFSP puree chapati. RESULTS: Consumers were willing to pay a price of Kenya shillings (KES) 19 (USD 0.14) and 35 (USD 0.26) for OFSP puree chapati in Homa Bay and Nairobi counties, respectively. The presence of children under 5 years in a household, consumers' awareness of OFSP products and benefits of consuming OFSP, and level of education had a positive and significant influence on WTP for OFSP puree chapati in both regions. CONCLUSION: The study demonstrated that consumers exhibited a positive preference for OFSP puree chapati. In order to increase the consumption of OFSP and its value-added products, it is important to promote consumer awareness of OFSP puree chapati and other such nutritious products through cooking demonstrations and other nudging approaches using attractive illustrations and social media platforms that engage mothers and care-givers of children under 5 years old as well as the youth. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: The consumption of foods such as sweet potato and cassava with high levels of carotenoids is a possible solution to reduce vitamin A deficiency. In this study, we evaluated the kinetics of thermal degradation of carotenoids. The content of carotenoids was quantified by high-performance liquid chromatography, first in fresh material, then in flour and finally in bakery products using mixtures of wheat, sweet potato and cassava. The degree of acceptance of the bakery products by children was also assessed through a sensory acceptance test. RESULTS: The study found that the degradation of carotenoid compounds in sweet potato followed first-order kinetics and fitted the Arrhenius equation with correlations of R2 > 0.9. The retention rates of all-trans-ß-carotene were 77%, 56% and 48% at cooking temperatures of 75, 85 and 95 °C respectively, during a cooking time of 20 min. The concentrations of all-trans-ß-carotene, after baking, for bread, cookies and cake were 15, 19 and 14 µg g-1 db, respectively. In a sensory acceptance test carried out in a school, 47.6% of the boys and 79.2% of the girls rated the cookies made from a mixture of cassava, sweet potato and wheat flour with the indicator I like it a lot. CONCLUSION: The content of carotenoid compounds was reduced by exposure to high temperatures and long cooking times. The combinations of cooking time and temperature which minimized degradation of all-trans-ß-carotene occurred at 75 °C-20 min and 95 °C-10 min. All-trans-ß-carotene retentions for bread, cookies and cake were 25%, 15% and 11% respectively. The mixture of wheat, sweet potato and cassava flour can be considered in the development of cookies with positive contributions of all-trans-ß-carotenes and with a good acceptance by children between 9 and 13 years old. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: Cassava processing is a crucial source of livelihood for rural farmers and processors in Nigeria and Cameroon. This study investigated the varietal effect on the processing productivity of women farmer processors within their working environment and compared this with the food product quality as evaluated by the processors and the field yield. Field trials were established in Nigeria (Benue and Osun state) and Cameroon (Littoral region). Eight cassava genotypes were evaluated. These eight varieties included newly bred genotypes, commercial checks and varieties provided and preferred by the processors. The roots of these genotypes were harvested and processed into gari and eba by processors. The time of each processing step was recorded. Processors assessed the quality of the roots and food products using pairwise ranking. RESULTS: In the field trials in Cameroon and Nigeria (Benue state), the newly bred genotypes showed superior performance in terms of dry matter content and fresh and dry yield. During processing, genotypes showed significant variation for most assessed parameters in both countries. Some newly bred varieties exhibited lower productivity that can make them more prone to drudgery than the local commercial checks and the varieties provided and preferred by the processors. Newly bred varieties were mostly ranked higher or equal to processors' preferred varieties concerning fresh root and food product quality. In the Cameroon location there were significant varietal differences in processing productivity and drudgery index which suggest that the particular processing methods there - such as pressing methods and fermentation time - cause these varietal differences to matter more. CONCLUSIONS: The varieties that were tested were observed to differ in yield, product quality, processing productivity, and potential drudgery levels. Some breeders' germplasms displayed a combination of increased yields and good product quality and good processor productivity. Those varieties that showed low processor productivity should be avoided during selection to avoid increased labour burden and associated drudgery of women processors. Further research is recommended to enhance food product color, latent culinary qualities, and processing productivity of newly bred varieties to improve acceptability and reduce processing drudgery for women. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: Cassava roots are widely consumed in tropical regions of Asia, Africa, and Latin America. Although the protein, vitamin, carotenoid, and mineral content in the leaves makes them a nutritionally attractive option, their consumption is limited due to their high levels of cyanogenic compounds (CCs). In this study, the CC content in different parts of the plant (leaves, storage root cortex, and parenchyma) was assessed at harvest for 50 landrace genotypes representative of cassava diversity in Latin America. The changes in CC in leaves at different physiological ages (3, 6, 9, and 11 months after planting) were also investigated. RESULTS: The average CC was higher in the cortex (804 ppm) and leaves (655 ppm) than in root parenchyma (305 ppm). Genotypes from different regions of Latin America, as identified by seven genetic diversity groups, differed significantly in CC levels. The Andean and Amazon groups had, respectively, the lowest (P = 0.0008) and highest (P < 0.0001) CC levels in all three parts of the plants. Cyanogenic compound concentrations were higher in leaves from young plants (P < 0.0001) and decreased with increasing physiological age. CONCLUSION: The results help to guide the selection of parental lines with low CC levels for breeding and to contribute to the expanded use of cassava and its by-products for food and feed. Cassava for fresh consumption, especially, requires varieties with low total CC content, especially in the root cortex and parenchyma. COL1108 (204, 213, and 174 ppm, respectively, in the parenchyma, cortex, and leaves) and PER297 (83, 238, and 299 ppm, respectively, in the parenchyma, cortex, and leaves) can fulfill this requirement. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: In an environment where the adoption of improved varieties resulting from plant breeding programs is limited, it is essential to identify end-user preferences beforehand. A participatory survey was conducted in eight localities in Korhogo and Bouaké regions (central and northern Cote d'Ivoire respectively) to identify producers' preferences and increase the adoption of improved varieties. The study involved 160 producers and consumers through focus group discussions and individual interviews. RESULTS: Sweetpotato is mostly grown on small plots (<1 ha) of land (89.2%), with women (66%) as the main producers. In the Bouaké region, sweetpotatoes are grown on mounds (100%), whereas in Korhogo they are grown on ridges (86.2%). The main food products or forms of preparation from roots are fries (34.7%), boiled (34.3%), mashed (12.4%), and sweetpotato stew (9.1%). Major constraints, including low price of roots (26.3%), low productivity (16.2%), and post-harvest storage issues (14.5%), were identified as affecting sweetpotato production. CONCLUSIONS: The selection of new varieties should be oriented towards high-yielding varieties with high dry matter content, deployed stems, and roots of round, oblong, or elliptical shape with good culinary characteristics (dry matter, sweet taste, dry texture, absence of fiber). Plants must be drought resistant, be tolerant to poor soil, diseases, and pests, and have a good yield. The color of skin and flesh of the sweetpotato, although constituting criteria of choice, are not essential for the acceptance or the rejection of a variety by users. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: Plantains are of major importance in the diet of many African populations. Plantains undergo many processing techniques at different ripening stages. Boiling is the most common method of processing plantains in Cameroonian households. The present study was undertaken to evaluate the effect of cooking mode and ripening stage on the physicochemical and nutritional parameters of two Musa genotypes. Fruits from genotypes, Batard and CARBAP K74, at three ripening stages (unripe, semi-ripe and ripe) were studied. Physicochemical and nutritional analyses were performed on raw and cooked pulps with and without peel at different cooking times (from 10 to 60 min). RESULTS: Significant variations (P < 0.05) were observed in the parameters assessed during cooking at each ripening stage according to cooking time. Plantain pulps boiled with peel exhibited high firmness (0.7-1.7 kgf), high soluble solids (7.4-22.4°Brix) and high dry matter content (29.8-38.3%) at all ripening stages. This cooking method yielded high protein (3.0-4.8%), lipid (0.2-1.8%), total starch (32-73%) and total carbohydrate (18-32%) contents. Boiling with or without peel had no significant effect (P > 0.05) on the pH of Batard pulps, nor the ash content of the pulps of both genotypes. CONCLUSION: Irrespective of the ripening stages used, during cooking by immersion in boiling water, cooking with peel best preserves the physicochemical and nutritional parameters of the analysed genotypes. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: Cassava utilization for food and/or industrial products depends on inherent properties of root dry matter content (DMC) and the starch fraction of amylose content (AC). Accordingly, in the present study, near-infrared reflectance spectroscopy (NIRS) models were developed to aid breeding and selection of DMC and AC as critical industrial traits taking care of root sample preparation and cassava germplasm diversity available in Uganda. RESULTS: Upon undertaking calibrations and cross-validations, best models were adopted for validation. DMC in calibration samples ranged from 20 to 45 g 100g-1 , whereas, for amylose content, it ranged from 14 to 33 g 100g-1 . In the validation set, average DMC was 29.5 g 100g-1 , whereas, for amylose content, it was 24.64 g 100g-1 . For DMC, a modified partial least square regression model had regression coefficients (R2 ) of 0.98 and 0.96, respectively, in the calibration and validation set. These were also associated with low bias (-0.018) and ratio of performance deviation that ranged from 4.7 to 5.0. In addition, standard error of prediction values ranged from 0.9 g 100g-1 to 1.06 g 100g-1 . For AC, the regression coefficient was 0.91 for the calibration set and 0.94 for the validation set. A bias equivalent to -0.03 and a ratio of performance deviation of 4.23 were observed. CONCLUSION: These findings confirm the robustness of NIRS in the estimation of dry matter content and amylose content in cassava roots and thus justify its use in routine cassava breeding operations. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: The purpose of this study was to investigate the potential of hyperspectral imaging for the characterization of cooking quality parameters, dry matter content (DMC), water absorption (WAB), and texture in cassava genotypes contrasting for their cooking quality. RESULTS: Hyperspectral images were acquired on cooked and fresh intact longitudinal and transversal slices from 31 cassava genotypes harvested in March 2022 in Colombia. Different chemometric methods were tested for the quantification of DMC, WAB, and texture parameters. Data analysis was conducted through partial least squares regression, K nearest neighbors regression, support vector machine regression and CovSel multiple linear regression (CovSel_MLR). Efficient performances were obtained for DMC using CovSel_MLR with, coefficient of multiple determination R p 2 = 0.94 $$ {R}_p^2=0.94 $$ , root-mean-square error of prediction RMSEP = 0.96 g/100 g, and ratio of the standard deviation values RPD = 3.60. High heterogeneity was observed between contrasting genotypes. The predicted distribution of DMC within the root can be homogeneous or heterogeneous depending on the genotype. Weak predictions were obtained for WAB and texture parameters. CONCLUSIONS: This study showed that hyperspectral imaging could be used as a high-throughput phenotyping tool for the visualization of DMC in contrasting cooking quality genotypes. Further improvement of protocols and larger datasets are required for WAB and texture quality traits. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: Bananas and plantains are important food sources for many people in the world. Their high starch content places them among the highest energy providers. This study aimed to determine the effects of altitude on banana starch properties in Cameroon. A dessert banana, a cooking banana, a plantain cultivar, and a plantain-like hybrid were grown at low and high altitudes (respectively at 80 m and 1300 m above sea level). RESULTS: Starch analyses showed an increase in moisture and pH values against a drop in total titratable acidity and dry matter content with respect to altitude. Amylose content, as well as water absorption capacity, oil absorption capacity and syneresis of high-altitude plantain and plantain-like hybrid, were significantly higher. Starch digestibility was low and ranged between 13.4% and 37.9% after 2 h of incubation. High-altitude plantain starches contained more amylose and were more resistant to enzymatic hydrolysis. CONCLUSION: Starches from CARBAP K74 and Kelong mekintu, grown at high altitude, showed good water and oil absorption capacities, low digestibility, and high resistance. The adequate properties of these banana starches predispose them for use as thickeners and gelling agents as well as ingredients for the formulation of low-calorie foods. This study highlights the importance of altitude when discussing banana and plantain starch properties. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: Nigeria and Cameroon are multi-ethnic countries with diverse preferences for food characteristics. The present study aimed to inform cassava breeders on consumer-prioritized eba quality traits. Consumer testing was carried out using the triadic comparison of technologies (tricot). Diverse consumers in villages, towns and cities evaluated the overall acceptability of eba made from different cassava genotypes. Data from both countries were combined and linked to laboratory analyses of eba and the gari used to make it. RESULTS: There is a strong preference for eba with higher cohesiveness and eba from gari with higher brightness and especially in Cameroon, with lower redness and yellowness. Relatively higher eba hardness and springiness values are preferred in the Nigerian locations, whereas lower values are preferred in Cameroon. Trends for solubility and swelling power of the gari differ between the two countries. The study also reveals that the older improved cassava genotype TMS30572 is a benchmark genotype with superior eba characteristics across different regions in Nigeria, whereas the recently released variety Game changer performs very well in Cameroon. In both locations, the recently released genotypes Obansanjo-2 and improved variety TM14F1278P0003 have good stability and overall acceptability for eba characteristics. CONCLUSION: The wide acceptance of a single genotype across diverse geographical and cultural conditions in Nigeria, as well as three acceptable new improved varieties in both locations, indicates that consumers' preferences are surprisingly homogeneous for eba. This would enhance breeding efforts to develop varieties with wider acceptability and expand potential target areas for released varieties. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: An understanding of the preferences of different stakeholders in the plantain value chain in rural and urban segments in Cameroon is important for the selection and adoption of new plantain cultivars. Boiled plantain is one of the most commonly consumed food products from this crop in Cameroon. Gendered food mapping and consumer testing with two plantain landraces (Batard and Big Ebanga) and a plantain-like hybrid (CARBAP K74) was carried out in rural and urban areas in the West and Littoral regions of Cameroon. RESULTS: Plantain users in these two regions were categorized into producers, traders, processors, and consumers. Preferences indicated that raw plantain should bear long and large fruits, with heavy bunches, and an orange pulp color, whereas boiled plantain should present with a yellow color and a soft and mealy pulp, with a good plantain aroma. Batard and Big Ebanga were liked moderately by consumers, whereas CARBAP K74 was liked slightly. CARBAP K74 was on par with Batard and Big Ebanga for some attributes, except for color and sweetness. CONCLUSION: More emphasis should be given to attributes such as color, firmness, and taste for the development of new plantain clones to be adopted by end users consuming boiled green plantain. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: Inadequate consideration of textural quality in conventional breeding pipelines of plantains (from breeders to end-users) results in limited impact. Knowledge of the textural quality characteristics of boiled plantain, as preferred by end-users, could help improve the adoption of new clones when these traits are selected for breeding. The present study aimed to evaluate the relationship between instrumental and sensory texture attributes of boiled plantain genotypes. Consumer testing (Just About Right and Check All That Apply tests), sensory quantitative descriptive analysis (QDA), instrumental texture profile analysis (TPA) and penetrometry were conducted with nine accessions: three landraces and six plantain-like bred hybrids. RESULTS: Landraces were considered just-about-right by more than 45% of people for all the sensory attributes (humidity, sweetness, color and firmness), described by characteristics such as smooth on sight, attractive, mealy, firm, plantain taste and yellow. Color and firmness were the most highly scored attributes by panelists for the landraces. Penetrometry discriminated among genotypes better than TPA. Hardness, gumminess, resilience and chewiness were the most discriminatory attributes for TPA, whereas hardness and area under the curve were the most discriminatory attributes for penetrometry. No correlation was found between penetrometry and sensory texture of boiled plantain. For TPA, negative correlations were found between sensory humidity and hardness, as well as between sensory firmness and resilience, whereas a positive correlation was found between resilience and sensory humidity. CONCLUSION: Combining QDA and texture measurements can make the selection of plantain hybrids more effective and improve the adoption of new varieties. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: Determinants of culinary qualities of East African highland cooking bananas (EAHCB) are not well known. This constrains the inclusion of user-preferred traits in breeding. The present study aimed to quantify key indicators of user-preferred characteristics to enable selection of acceptable hybrids. RESULTS: Qualitative characteristics that drive preference were big bunches (15-34 kg), long straight/slightly curved fingers (12-23 cm), yellowness and soft texture. Descriptive sensory analysis of the intensity of colour and texture the 23 genotypes revealed that landraces Kibuzi, Mbwazirume, Nakitembe and Mpologoma had higher intensity of yellowness and lower intensity of hardness (softer) and a low score (≤ 1.0) of astringency taste. A preference test showed that they had higher acceptability scores. Biochemical, instrumental and sensory data revealed correlations between sensory firmness and instrumental hardness (r = 0.5), sensory firmness and amylopectin (r = -0.54), suggesting that qualitative descriptions can be predicted by instrumental and biochemical indicators. Significant (P < 0.05) variations in amylose and total starch content were observed in different varieties. Moderate correlations between instrumental hardness and firmness in mouth (r = 0.55), cohesiveness and firmness in the mouth (r = 0.57), and adhesiveness and firmness in the mouth (r = 0.64) were observed. Surprisingly, carotenoids content was not correlated with yellowness in cooked matooke. However, positive correlations were observed between chroma (b*) parameters of raw matooke and sensorial assessed color on cooked samples. CONCLUSION: Qualitative characteristis; the bunch, pulp colour and texture; that drive users-preference in the EAHCB were quantified, paving way for breeders to use them to select genotypes with these attributes early in the breeding process. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: The relevance of several characteristics for the acceptability of steamed East Africa bananas (matooke) was assessed using consumer-preferred characteristics, the overall liking scores, check-all-that-apply (CATA) and the Just About Right scale. The study was conducted in rural and urban locations in three banana growing regions of Uganda. Two landraces and two hybrids were processed into matooke. Twelve trained panellists evaluated color, taste and texture sensory characteristics. RESULTS: Consumers scored matooke from landraces as the most liked. The CATA test showed that the most important characteristics were: smooth mouthfeel, soft to the touch, not sticky, moldable, deep yellow color, attractive, good matooke taste and smell. Principal component analysis confirmed that most of the preferred sensory characteristics were associated with the local genotypes, whereas the less preferred characteristics were associated with hybrids. Correlation analysis revealed strong positive correlations between the consumer assessed characteristics, hardness by touch, softness to touch and yellowness, as well as quantitative laboratory characteristics (moldable, hardness by touch, softness and yellowness) of the steamed matooke. Color assessed by consumers was strongly correlated with the laboratory-assessed color indicators. CONCLUSION: The strong associations observed between laboratory-assessed and consumer-based characteristics (moldable by touch and yellowness) suggest the possibility of predicting consumer characteristics using quantitative laboratory sensory assessments. Matooke taste as assessed by consumer panel is strongly associated with smooth texture and deep yellow color, which were the characteristics associated with landraces in the laboratory sensory assessment. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
Roots, tubers and cooking bananas are bulky and highly perishable. In Africa, except for yams, their consumption is mainly after transport, peeling and cooking in the form of boiled pieces or dough, a few days after harvest. To stabilize and better preserve the products and, in the case of cassava, release toxic cyanogenic glucosides, a range of intermediate products have been developed, mainly for cassava, related to fermentation and drying after numerous processing operations. This review highlights, for the first time, the impact of genotypes on labour requirements, productivity and the associated drudgery in processing operations primarily carried out by women processors. Peeling, soaking/grinding/fermentation, dewatering, sieving and toasting steps were evaluated on a wide range of new hybrids and traditional landraces. The review highlights case studies of gari production from cassava. The results show that, depending on the genotypes used, women's required labour can be more than doubled and even the sum of the weights transported along the process can be up to four times higher for the same quantity of end product. Productivity and loads carried between each processing operation are highly influenced by root shape, ease of peeling, dry matter content and/or fiber content. Productivity and the often related experienced drudgery are key factors to be considered for a better acceptance of new genotypes by actors in the value-addition chain, leading to enhanced adoption and ultimately to improved livelihoods for women processors. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: Retting is a key step of cassava processing into widely consumed foods (fufu, chikwangue, miondo and bobolo) in sub-Saharan Africa. For some populations, retting ability is a major quality criterion that drives the adoption of new cassava varieties. Despite this importance, the physiological basis associated with this process remains poorly understood, and should lead to improved screening tools for breeding. Eight cassava varieties contrasting in retting ability properties were used in the present study. Roots and soaking water were sampled during retting and characterized at both histological and biochemical levels. RESULTS: Histological data highlighted the degradation of root cell wall during retting. The average pH of soaking water decreased from 5.94 to 4.31 and the average simple sugars decreased from 0.18 to 0 g L-1 , whereas the organic acids increased up to 5.61 g L-1 . In roots tissue, simple sugars and organic acid contents decreased from 22.9 to 0 g kg-1 and from 80 to 0 g kg-1 , respectively. The total pectin content of roots among varieties at harvest was similar, and decreased during the retting process. Overall, there was a negative correlation between total pectins content and root softening, although this did not reach statistical significance. CONCLUSION: Major histological and biochemical changes occurred during cassava root retting, with some of them associated with the process. Retting affected starch pasting properties more than starch content. Although this process is characterized by root softening and degradation of cell wall structure, the present study strongly suggested that pectin is not the only cell wall component involved in these changes. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
BACKGROUND: The assessment of user acceptability in relation to crop quality traits should be a full part of breeding selection programs. Our methodology is based on a combination of sensory approaches aiming to evaluate the sensory characteristics and user acceptability of root, tuber and banana (RTB) varieties. RESULTS: The four-stepped approach links sensory characteristics to physicochemical properties and end-user acceptance. It starts with the development of key quality traits using qualitative approaches (surveys and ranking) and it applies a range of sensory tests such as Quantitative Descriptive Analysis with a trained panel, Check-All-That-apply, nine-point hedonic scale and Just-About-Right with consumers. Results obtained on the same samples from the consumer acceptance, sensory testing and physicochemical testing are combined to explore correlations and develop acceptability thresholds. CONCLUSION: A combined qualitative and quantitative approach involving different sensory techniques is necessary to capture sensory acceptance of products from new RTB clones. Some sensory traits can be correlated with physicochemical characteristics and could be evaluated using laboratory instruments (e.g. texture). Other traits (e.g. aroma and mealiness) are more difficult to predict, and the use of a sensory panel is still necessary. For these latter traits, more advanced physicochemical methods that could accelerate the breeding selection through high throughput phenotyping are still to be developed. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.