Deep learning-based automatic pipeline for quantitative assessment of thigh muscle morphology and fatty infiltration.

PURPOSE: Fast and accurate thigh muscle segmentation from MRI is important for quantitative assessment of thigh muscle morphology and composition. A novel deep learning (DL) based thigh muscle and surrounding tissues segmentation model was developed for fully automatic and reproducible cross-sectional area (CSA) and fat fraction (FF) quantification and tested in patients at 10 years after anterior cruciate ligament reconstructions. METHODS: A DL model combining UNet and DenseNet was trained and tested using manually segmented thighs from 16 patients (32 legs). Segmentation accuracy was evaluated using Dice similarity coefficients (DSC) and average symmetric surface distance (ASSD). A UNet model was trained for comparison. These segmentations were used to obtain CSA and FF quantification. Reproducibility of CSA and FF quantification was tested with scan and rescan of six healthy subjects. RESULTS: The proposed UNet and DenseNet had high agreement with manual segmentation (DSC >0.97, ASSD < 0.24) and improved performance compared with UNet. For hamstrings of the operated knee, the automated pipeline had largest absolute difference of 6.01% for CSA and 0.47% for FF as compared to manual segmentation. In reproducibility analysis, the average difference (absolute) in CSA quantification between scan and rescan was better for the automatic method as compared with manual segmentation (2.27% vs. 3.34%), whereas the average difference (absolute) in FF quantification were similar. CONCLUSIONS: The proposed method exhibits excellent accuracy and reproducibility in CSA and FF quantification compared with manual segmentation and can be used in large-scale patient studies.

Cardiac Magnetic Resonance Fingerprinting: Potential Clinical Applications.

PURPOSE OF REVIEW: Cardiac magnetic resonance fingerprinting (cMRF) has developed as a technique for rapid, multi-parametric tissue property mapping that has potential to both improve cardiac MRI exam efficiency and expand the information captured. In this review, we describe the cMRF technique, summarize technical developments and in vivo reports, and highlight potential clinical applications. RECENT FINDINGS: Technical developments in cMRF continue to progress rapidly, including motion compensated reconstruction, additional tissue property quantification, signal time course analysis, and synthetic LGE image generation. Such technical developments can enable simplified CMR protocols by combining multiple evaluations into a single protocol and reducing the number of breath-held scans. cMRF continues to be reported for use in a range of pathologies; however barriers to clinical implementation remain. Technical developments are described in this review, followed by a focus on potential clinical applications that they may support. Clinical translation of cMRF could shorten protocols, improve CMR accessibility, and provide additional information as compared to conventional cardiac parametric mapping methods. Current needs for clinical implementation are discussed, as well as how those needs may be met in order to bring cMRF from its current research setting to become a viable tool for patient care.

Suppression of electromagnetic interference in electroretinography from a patient with an implanted left ventricular assist device (LVAD).

PURPOSE: A left ventricular assist device (LVAD) is an implantable cardiac pump that uses a magnetically-levitating rotor to pump blood into circulation for patients with congestive heart failure. The continuous high-frequency motion of the pump can cause significant interference in electroretinography (ERG) recordings. We evaluate filtering methods to improve ERG quality in the presence of LVAD interference. METHODS: A patient with an implanted LVAD was referred to our clinic for ERG testing on suspicion of a retinal dystrophy. Full-field ERG (ffERG) and pattern ERG (pERG) were performed according to ISCEV standards. Recordings were acquired once in full-bandwidth mode and again in low-bandwidth mode. Digital low-pass and band-stop filtering were performed to mitigate ERG interference. Post-processing was also evaluated in a control subject with no implanted device. RESULTS: High-frequency interference was present in all ERG recordings and corresponded to the speed settings of the pump. When applied in post-processing, both low-pass and band-stop filters suppressed the interference and presented readable ERGs without affecting peak times or amplitudes. By contrast, when recording in low-bandwidth mode, the filter drop-off was not steep enough to completely remove the interference and peak delays were introduced that could not be readily corrected. CONCLUSIONS: LVAD interference in ERG waveforms can be successfully removed using simple digital filters. If post hoc data processing capabilities are unavailable, a large amount of interference can be removed by narrowing the acquisition bandwidth and averaging additional repeats of each stimulus response.

Myocardial T1 and T2 quantification and water-fat separation using cardiac MR fingerprinting with rosette trajectories at 3T and 1.5T.

PURPOSE: This work aims to develop an approach for simultaneous water-fat separation and myocardial T1 and T2 quantification based on the cardiac MR fingerprinting (cMRF) framework with rosette trajectories at 3T and 1.5T. METHODS: Two 15-heartbeat cMRF sequences with different rosette trajectories designed for water-fat separation at 3T and 1.5T were implemented. Water T1 and T2 maps, water image, and fat image were generated with B0 inhomogeneity correction using a B0 map derived from the cMRF data themselves. The proposed water-fat separation rosette cMRF approach was validated in the International Society for Magnetic Resonance in Medicine/National Institute of Standards and Technology MRI system phantom and water/oil phantoms. It was also applied for myocardial tissue mapping of healthy subjects at both 3T and 1.5T. RESULTS: Water T1 and T2 values measured using rosette cMRF in the International Society for Magnetic Resonance in Medicine/National Institute of Standards and Technology phantom agreed well with the reference values. In the water/oil phantom, oil was well suppressed in the water images and vice versa. Rosette cMRF yielded comparable T1 but 2~3 ms higher T2 values in the myocardium of healthy subjects than the original spiral cMRF method. Epicardial fat deposition was also clearly shown in the fat images. CONCLUSION: Rosette cMRF provides fat images along with myocardial T1 and T2 maps with significant fat suppression. This technique may improve visualization of the anatomical structure of the heart by separating water and fat and could provide value in diagnosing cardiac diseases associated with fibrofatty infiltration or epicardial fat accumulation. It also paves the way toward comprehensive myocardial tissue characterization in a single scan.

Prospective Evaluation of Repeatability and Robustness of Radiomic Descriptors in Healthy Brain Tissue Regions In Vivo Across Systematic Variations in T2-Weighted Magnetic Resonance Imaging Acquisition Parameters.

BACKGROUND: Radiomic descriptors from magnetic resonance imaging (MRI) are promising for disease diagnosis and characterization but may be sensitive to differences in imaging parameters. OBJECTIVE: To evaluate the repeatability and robustness of radiomic descriptors within healthy brain tissue regions on prospectively acquired MRI scans; in a test-retest setting, under controlled systematic variations of MRI acquisition parameters, and after postprocessing. STUDY TYPE: Prospective. SUBJECTS: Fifteen healthy participants. FIELD STRENGTH/SEQUENCE: A 3.0 T, axial T2 -weighted 2D turbo spin-echo pulse sequence, 181 scans acquired (2 test/retest reference scans and 12 with systematic variations in contrast weighting, resolution, and acceleration per participant; removing scans with artifacts). ASSESSMENT: One hundred and forty-six radiomic descriptors were extracted from a contiguous 2D region of white matter in each scan, before and after postprocessing. STATISTICAL TESTS: Repeatability was assessed in a test/retest setting and between manual and automated annotations for the reference scan. Robustness was evaluated between the reference scan and each group of variant scans (contrast weighting, resolution, and acceleration). Both repeatability and robustness were quantified as the proportion of radiomic descriptors that fell into distinct ranges of the concordance correlation coefficient (CCC): excellent (CCC > 0.85), good (0.7 ≤ CCC ≤ 0.85), moderate (0.5 ≤ CCC < 0.7), and poor (CCC < 0.5); for unprocessed and postprocessed scans separately. RESULTS: Good to excellent repeatability was observed for 52% of radiomic descriptors between test/retest scans and 48% of descriptors between automated vs. manual annotations, respectively. Contrast weighting (TR/TE) changes were associated with the largest proportion of highly robust radiomic descriptors (21%, after processing). Image resolution changes resulted in the largest proportion of poorly robust radiomic descriptors (97%, before postprocessing). Postprocessing of images with only resolution/acceleration differences resulted in 73% of radiomic descriptors showing poor robustness. DATA CONCLUSIONS: Many radiomic descriptors appear to be nonrobust across variations in MR contrast weighting, resolution, and acceleration, as well in test-retest settings, depending on feature formulation and postprocessing. EVIDENCE LEVEL: 2 TECHNICAL EFFICACY: Stage 2.

Cardiac cine magnetic resonance fingerprinting for combined ejection fraction, T1 and T2 quantification.

This study introduces a technique called cine magnetic resonance fingerprinting (cine-MRF) for simultaneous T1 , T2 and ejection fraction (EF) quantification. Data acquired with a free-running MRF sequence are retrospectively sorted into different cardiac phases using an external electrocardiogram (ECG) signal. A low-rank reconstruction with a finite difference sparsity constraint along the cardiac motion dimension yields images resolved by cardiac phase. To improve SNR and precision in the parameter maps, these images are nonrigidly registered to the same phase and matched to a dictionary to generate T1 and T2 maps. Cine images for computing left ventricular volumes and EF are also derived from the same data. Cine-MRF was tested in simulations using a numerical relaxation phantom. Phantom and in vivo scans of 19 subjects were performed at 3 T during a 10.9 seconds breath-hold with an in-plane resolution of 1.6 x 1.6 mm2 and 24 cardiac phases. Left ventricular EF values obtained with cine-MRF agreed with the conventional cine images (mean bias -1.0%). Average myocardial T1 times in diastole/systole were 1398/1391 ms with cine-MRF, 1394/1378 ms with ECG-triggered cardiac MRF (cMRF) and 1234/1212 ms with MOLLI; and T2 values were 30.7/30.3 ms with cine-MRF, 32.6/32.9 ms with ECG-triggered cMRF and 37.6/41.0 ms with T2 -prepared FLASH. Cine-MRF and ECG-triggered cMRF relaxation times were in good agreement. Cine-MRF T1 values were significantly longer than MOLLI, and cine-MRF T2 values were significantly shorter than T2 -prepared FLASH. In summary, cine-MRF can potentially streamline cardiac MRI exams by combining left ventricle functional assessment and T1 -T2 mapping into one time-efficient acquisition.

Improving Bone Mineral Density Assessment Using Spectral Detector CT.

INTRODUCTION: Bone mineral density (BMD) analysis by Dual-Energy x-ray Absorptiometry (DXA) can have some false negatives due to overlapping structures in the projections. Spectral Detector CT (SDCT) can overcome these limitations by providing volumetric information. We investigated its performance for BMD assessment and compared it to DXA and phantomless volumetric bone mineral density (PLvBMD), the latter known to systematically underestimate BMD. DXA is the current standard for BMD assessment, while PLvBMD is an established alternative for opportunistic BMD analysis using CT. Similarly to PLvBMD, spectral data could allow BMD screening opportunistically, without additional phantom calibration. METHODOLOGY: Ten concentrations of dipotassium phosphate (K2HPO4) ranging from 0 to 600 mg/ml, in an acrylic phantom were scanned using SDCT in four different, clinically-relevant scan conditions. Images were processed to estimate the K2HPO4 concentrations. A model representing a human lumbar spine (European Spine Phantom) was scanned and used for calibration via linear regression analysis. After calibration, our method was retrospectively applied to abdominal SDCT scans of 20 patients for BMD assessment, who also had PLvBMD and DXA. Performance of PLvBMD, DXA and our SDCT method were compared by sensitivity, specificity, negative predictive value and positive predictive value for decreased BMD. RESULTS: There was excellent correlation (R2 >0.99, p < 0.01) between true and measured K2HPO4 concentrations for all scan conditions. Overall mean measurement error ranged from -11.5 ± 4.7 mg/ml (-2.8 ± 6.0%) to -12.3 ± 6.3 mg/ml (-4.8 ± 3.0%) depending on scan conditions. Using DXA as a reference standard, sensitivity/specificity for detecting decreased BMD in the scanned patients were 100%/73% using SDCT, 100%/40% using PLvBMD provided T-scores, and 90-100%/40-53% using PLvBMD hydroxyapatite density classifications, respectively. CONCLUSIONS: Our results show excellent sensitivity and high specificity of SDCT for detecting decreased BMD, demonstrating clinical feasibility. Further validation in prospective clinical trials will be required.

Optimal slice thickness for improved accuracy of quantitative analysis of fluorescent cell and microsphere distribution in cryo-images.

Cryo-imaging has been effectively used to study the biodistribution of fluorescent cells or microspheres in animal models. Sequential slice-by-slice fluorescent imaging enables detection of fluorescent cells or microspheres for corresponding quantification of their distribution in tissue. However, if slices are too thin, there will be data overload and excessive scan times. If slices are too thick, then cells can be missed. In this study, we developed a model for detection of fluorescent cells or microspheres to aid optimal slice thickness determination. Key factors include: section thickness (X), fluorescent cell intensity (Ifluo), effective tissue attenuation coefficient (µT), and a detection threshold (T). The model suggests an optimal slice thickness value that provides near-ideal sensitivity while minimizing scan time. The model also suggests a correction method to compensate for missed cells in the case that image data were acquired with overly large slice thickness. This approach allows cryo-imaging operators to use larger slice thickness to expedite the scan time without significant loss of cell count. We validated the model using real data from two independent studies: fluorescent microspheres in a pig heart and fluorescently labeled stem cells in a mouse model. Results show that slice thickness and detection sensitivity relationships from simulations and real data were well-matched with 99% correlation and 2% root-mean-square (RMS) error. We also discussed the detection characteristics in situations where key assumptions of the model were not met such as fluorescence intensity variation and spatial distribution. Finally, we show that with proper settings, cryo-imaging can provide accurate quantification of the fluorescent cell biodistribution with remarkably high recovery ratios (number of detections/delivery). As cryo-imaging technology has been used in many biological applications, our optimal slice thickness determination and data correction methods can play a crucial role in further advancing its usability and reliability.

Quantitative MRI for Evaluation of Musculoskeletal Disease: Cartilage and Muscle Composition, Joint Inflammation, and Biomechanics in Osteoarthritis.

ABSTRACT: Magnetic resonance imaging (MRI) is a valuable tool for evaluating musculoskeletal disease as it offers a range of image contrasts that are sensitive to underlying tissue biochemical composition and microstructure. Although MRI has the ability to provide high-resolution, information-rich images suitable for musculoskeletal applications, most MRI utilization remains in qualitative evaluation. Quantitative MRI (qMRI) provides additional value beyond qualitative assessment via objective metrics that can support disease characterization, disease progression monitoring, or therapy response. In this review, musculoskeletal qMRI techniques are summarized with a focus on techniques developed for osteoarthritis evaluation. Cartilage compositional MRI methods are described with a detailed discussion on relaxometric mapping (T 2 , T 2 *, T 1ρ ) without contrast agents. Methods to assess inflammation are described, including perfusion imaging, volume and signal changes, contrast-enhanced T 1 mapping, and semiquantitative scoring systems. Quantitative characterization of structure and function by bone shape modeling and joint kinematics are described. Muscle evaluation by qMRI is discussed, including size (area, volume), relaxometric mapping (T 1 , T 2 , T 1ρ ), fat fraction quantification, diffusion imaging, and metabolic assessment by 31 P-MR and creatine chemical exchange saturation transfer. Other notable technologies to support qMRI in musculoskeletal evaluation are described, including magnetic resonance fingerprinting, ultrashort echo time imaging, ultrahigh-field MRI, and hybrid MRI-positron emission tomography. Challenges for adopting and using qMRI in musculoskeletal evaluation are discussed, including the need for metal artifact suppression and qMRI standardization.

Fingerprinting MINOCA: Unraveling Clues With Quantitative CMR.

In the following case series, we describe the clinical presentation of 2 patients with myocardial infarction with nonobstructive coronary arteries with different underlying pathophysiologic mechanisms. In both scenarios, cardiac magnetic resonance (CMR) imaging provided comprehensive tissue characterization with both conventional parametric mapping techniques and CMR fingerprinting. These cases demonstrate the diagnostic utility for CMR to elucidate the underlying etiology and appropriate therapeutic strategy. (Level of Difficulty: Advanced.).

Current Approach to the Diagnosis of Sarcopenia in Heart Failure: A Narrative Review on the Role of Clinical and Imaging Assessments.

Sarcopenia has been established as a predictor of poor outcomes in various clinical settings. It is particularly prevalent in heart failure, a clinical syndrome that poses significant challenges to health care worldwide. Despite this, sarcopenia remains overlooked and undertreated in cardiology practice. Understanding the currently proposed diagnostic process is paramount for the early detection and treatment of sarcopenia to mitigate downstream adverse health outcomes.

Characterization of cardiac amyloidosis using cardiac magnetic resonance fingerprinting.

BACKGROUND: Cardiac amyloidosis (CA) is an infiltrative cardiomyopathy with poor prognosis absent appropriate treatment. Elevated native myocardial T1 and T2 have been reported for CA, and tissue characterization by cardiac MRI may expedite diagnosis and treatment. Cardiac Magnetic Resonance Fingerprinting (cMRF) has the potential to enable tissue characterization for CA through rapid, simultaneous T1 and T2 mapping. Furthermore, cMRF signal timecourses may provide additional information beyond myocardial T1 and T2. METHODS: Nine CA patients and five controls were scanned at 3 T using a prospectively gated cMRF acquisition. Two cMRF-based analysis approaches were examined: (1) relaxometric-based linear discriminant analysis (LDA) using native T1 and T2, and (2) signal timecourse-based LDA. The Fisher coefficient was used to compare the separability of patient and control groups from both approaches. Leave-two-out cross-validation was employed to evaluate the classification error rates of both approaches. RESULTS: Elevated myocardial T1 and T2 was observed in patients vs controls (T1: 1395 ± 121 vs 1240 ± 36.4 ms, p < 0.05; T2: 36.8 ± 3.3 vs 31.8 ± 2.6 ms, p < 0.05). LDA scores were elevated in patients for relaxometric-based LDA (0.56 ± 0.28 vs 0.18 ± 0.13, p < 0.05) and timecourse-based LDA (0.97 ± 0.02 vs 0.02 ± 0.02, p < 0.05). The Fisher coefficient was greater for timecourse-based LDA (60.8) vs relaxometric-based LDA (1.6). Classification error rates were lower for timecourse-based LDA vs relaxometric-based LDA (12.6 ± 24.3 vs 22.5 ± 30.1%, p < 0.05). CONCLUSIONS: These findings suggest that cMRF may be a valuable technique for the detection and characterization of CA. Analysis of cMRF signal timecourse data may improve tissue characterization as compared to analysis of native T1 and T2 alone.

Feasibility of Magnetic Resonance Fingerprinting on Aging MRI Hardware.

The purpose of this work is to evaluate the feasibility of performing magnetic resonance fingerprinting (MRF) on older and lower-performance MRI hardware as a means to bring advanced imaging to the aging MRI install base. Phantom and in vivo experiments were performed on a 1.5T Siemens Aera (installed 2015) and 1.5T Siemens Symphony (installed 2002). A 2D spiral MRF sequence for simultaneous T1/T2/M0 mapping was implemented on both scanners with different gradient trajectories to accommodate system specifications. In phantom, for T1/T2 values in a physiologically relevant range (T1: 195-1539 ms; T2: 20-267 ms), scanners had strong correlation (R2 > 0.999) with average absolute percent difference of 8.1% and 10.1%, respectively. Comparison of the two trajectories on the newer scanner showed differences of 2.6% (T1) and 10.9% (T2), suggesting a partial explanation of the observed inter-scanner bias. Inter-scanner agreement was better when the same trajectory was used, with differences of 6.0% (T1) and 4.0% (T2). Intra-scanner coefficient of variation (CV) of T1 and T2 estimates in phantom were <2.0% and in vivo were ≤3.5%. In vivo inter-scanner white matter CV was 4.8% (T1) and 5.1% (T2). White matter measurements on the aging scanner after two months were consistent, with differences of 1.9% (T1) and 3.9% (T2). In conclusion, MRF is feasible on an aging MRI scanner and required only changes to the gradient trajectory.

Cardiac magnetic resonance fingerprinting: Trends in technical development and potential clinical applications.

Quantitative cardiac magnetic resonance has emerged in recent years as an approach for evaluating a range of cardiovascular conditions, with T1 and T2 mapping at the forefront of these developments. Cardiac Magnetic Resonance Fingerprinting (cMRF) provides a rapid and robust framework for simultaneous quantification of myocardial T1 and T2 in addition to other tissue properties. Since the advent of cMRF, a number of technical developments and clinical validation studies have been reported. This review provides an overview of cMRF, recent technical developments, healthy subject and patient studies, anticipated technical improvements, and potential clinical applications. Recent technical developments include slice profile and pulse efficiency corrections, improvements in image reconstruction, simultaneous multislice imaging, 3D whole-ventricle imaging, motion-resolved imaging, fat-water separation, and machine learning for rapid dictionary generation. Future technical developments in cMRF, such as B0 and B1 field mapping, acceleration of acquisition and reconstruction, imaging of patients with implanted devices, and quantification of additional tissue properties are also described. Potential clinical applications include characterization of infiltrative, inflammatory, and ischemic cardiomyopathies, tissue characterization in the left atrium and right ventricle, post-cardiac transplantation assessment, reduction of contrast material, pre-procedural planning for electrophysiology interventions, and imaging of patients with implanted devices.

Comparison of automated beam hardening correction (ABHC) algorithms for myocardial perfusion imaging using computed tomography.

PURPOSE: Myocardial perfusion imaging using computed tomography (MPI-CT) and coronary CT angiography (CTA) have the potential to make CT an ideal noninvasive imaging gatekeeper exam for invasive coronary angiography. However, beam hardening can prevent accurate blood flow estimation in dynamic MPI-CT and can create artifacts that resemble flow deficits in single-shot MPI-CT. In this work, we compare four automatic beam hardening correction algorithms (ABHCs) applied to CT images, for their ability to produce accurate single images of contrast and accurate MPI flow maps using images from conventional CT systems, without energy sensitivity. METHODS: Previously, we reported a method, herein called ABHC-1, where we iteratively optimized a cost function sensitive to beam hardening artifacts in MPI-CT images and used a low order polynomial correction on projections of segmentation-processed CT images. Here, we report results from two new algorithms with higher order polynomial corrections, ABHC-2 and ABHC-3 (with three and seven free parameters, respectively), having potentially better correction but likely reduced estimability. Additionally, we compared results to an algorithm reported by others in the literature (ABHC-NH). Comparisons were made on a digital static phantom with simulated water, bone, and iodine regions; on a digital dynamic anthropomorphic phantom, with simulated blood flow; and on preclinical porcine experiments. We obtained CT images on a prototype spectral detector CT (Philips Healthcare) scanner that provided both conventional and virtual keV images, allowing us to quantitatively compare corrected CT images to virtual keV images. To test these methods' parameter optimization sensitivity to noise, we evaluated results on images obtained using different mAs. RESULTS: In images of the static phantom, ABHC-2 reduced beam hardening artifacts better than our previous ABHC-1 algorithm, giving artifacts smaller than 1.8 HU, even in the presence of high noise which should affect parameter optimization. Taken together, the quality of static phantom results ordered ABHC-2> ABHC-3> ABHC-1>> ABHC-NH. In an anthropomorphic MPI-CT simulator with homogeneous myocardial blood flow of 100 ml⋅min-1 ⋅100 g-1 , blood flow estimation results were 122 ± 24 (FBP), 135 ± 24 (ABHC-NH), 104 ± 14 (ABHC-1), 100 ± 12 (ABHC-2), and 108 ± 18 (ABHC-3) ml⋅min-1 ⋅100 g-1 , showing ABHC-2 as a clear winner. Visual and quantitative evaluations showed much improved homogeneity of myocardial flow with ABHC-2, nearly eliminating substantial artifacts in uncorrected flow maps which could be misconstrued as flow deficits. ABHC-2 performed universally better than ABHC-1, ABHC-3, and ABHC-NH in simulations with different acquisitions (varying noise and kVp values). In the presence of a simulated flow deficit, all ABHC methods retained the flow deficit, and ABHC-2 gave the most accurate flow ratio and homogeneity. ABHC-3 corrected phantom flow values were slightly better than ABHC-2, in noiseless images, suggesting that reduced quality in noisy images was due to reduced estimability. In an experiment with a pig expected to have uniform flow, ABHC-2 applied to conventional images improved flow maps to compare favorably to those from 70keV images. CONCLUSION: The automated algorithm can be used with different parametric BH correction models. ABHC-2 improved MPI-CT blood flow estimation as compared to other approaches and was robust to noisy images. In simulation and preclinical experiments, ABHC-2 gave results approaching gold standard 70 keV measurements.

Quantification of metal artifacts in computed tomography: methodological considerations.

Numerous methods for artifact quantification in computed tomography (CT) imaging have been suggested. This study evaluated their utility with regards to correspondence with visual artifact perception and reproducibility. Two titanium rods (5 and 10 mm) were examined with 25 different scanning- and image-reconstruction parameters resulting in different types and extents of artifacts. Four radiologists evaluated every image against each other using an in-house developed software. Rating was repeated two times (2,400 comparisons = 2 times × 4 readers × 300 comparisons). Rankings were combined to obtain a reference ranking. Proposed approaches for artifact quantification include manual measurement of attenuation, standard deviation and noise and sophisticated algorithm-based approaches within the image- and frequency-domain. Two radiologists conducted manual measurements twice while the aforementioned algorithms were implemented within the Matlab-Environment allowing for automated image analysis. The reference ranking was compared to all aforementioned methods for artifact quantification to identify suited approaches. Besides visual analysis, Kappa-statistics and intraclass correlation coefficients (ICC) were used. Intra- and Inter-reader agreements of visual artifact perception were excellent (ICC 0.85-0.92). No quantitative method was able to represent the exact ranking of visually perceived artifacts; however, ICC for manual measurements were low (ICC 0.25-0.97). The method that showed best correspondence and reproducibility used a Fourier-transformed linear ROI and lower-end frequency bins. Automated measurements of artifact extent should be preferred over manual measurements as the latter show a limited reproducibility. One method that allows for automated quantification of such artefacts is made available as an electronic supplement.

Impact of Patient Size and Radiation Dose on Accuracy and Precision of Iodine Quantification and Virtual Noncontrast Values in Dual-layer Detector CT-A Phantom Study.

RATIONALE AND OBJECTIVES: Iodine quantification (IQ) and virtual noncontrast (VNC) images produced by dual-energy CT (DECT) can be used for various clinical applications. We investigate the performance of dual-layer DECT (DLDECT) in different phantom sizes and varying radiation doses and tube voltages, including a low-dose pediatric setting. MATERIALS AND METHODS: Three phantom sizes (simulating a 10-year-old child, an average, and a large-sized adult) were scanned with iodine solution inserts with concentrations ranging 0-32 mg/ml, using the DLDECT. Each phantom size was scanned with CTDIvol 2-15 mGy at 120 and 140 kVp. The smallest phantom underwent additional scans with CTDIvol 0.9-1.8 mGy. All scans were repeated 3 times. Each iodine insert was analyzed using VNC and IQ images for accuracy and precision, by comparison to known values. RESULTS: For scans from 2 to 15 mGy mean VNC attenuation and IQ error in the iodine inserts in the small, medium, and large phantoms was 1.2 HU ± 3.2, -1.2 HU ± 14.9, 2.6 HU ± 23.6; and +0.1 mg/cc ± 0.4, -0.9 mg/cc ± 0.9, and -1.8 mg/cc ± 1.8, respectively. In this dose range, there were no significant differences (p ≥ 0.05) in mean VNC attenuation or IQ accuracy in each phantom size, while IQ was significantly less precise in the small phantom at 2 mGy and 10 mGy (p < 0.05). Scans with CTDIvol 0.9-1.8 mGy in the small phantom showed a limited, but statistically significantly lower VNC attenuation precision and IQ accuracy (-0.5 HU ± 5.3 and -0.3 mg/cc ± 0.5, respectively) compared to higher dose scans in the same phantom size. CONCLUSION: Performance of iodine quantification and subtraction by VNC images in DLDECT is largely dose independent, with the primary factor being patient size. Low-dose pediatric scan protocols have a significant, but limited impact on IQ and VNC attenuation values.

Advances in MRI Applications to Diagnose and Manage Cardiomyopathies.

PURPOSE OF REVIEW: The prevalence of heart failure continues to rise, and imaging characterization of the cardiomyopathic process is important for identifying myocardial disease, initiating appropriate treatment, and improving outcomes. We aimed to summarize recent advances in cardiac magnetic resonance imaging (CMR) applications for the diagnosis, characterization, and implications on management of various cardiomyopathies. RECENT FINDINGS: Parametric mapping by CMR has emerged as an important advancement in quantification of myocardial fibrosis, increased extracellular space, and myocardial edema. In addition, improved assessment of myocardial function with myocardial strain assessment may provide early identification of patients at risk and determining responsiveness to therapeutic interventions. Novel MRI techniques and the advent of artificial intelligence may help to uncover important mechanistic insights into the cardiomyopathic process. Innovative CMR techniques continue to evolve, and it will be of interest to determine how these advances can be incorporated into clinical practice to improve diagnosis, treatment, and management of patients with cardiomyopathies.

Ocular Blood Volume Index Based on Scattering Properties of Retinal Vessels Using Spectral Domain Optical Coherence Tomography.

Introduction: The evaluation of retinal vessels and the retinal blood flow is important for ocular diseases. We introduce a spectral domain optical coherence tomography (SD-OCT) based method for facilitating a retinal blood vessel analysis using the scattering properties of retinal vessels. The intensity of the distal shadow of vessels caused by the scattered signal is measured, correlated with the pulsatile ocular blood flow (POBF), and its repeatability is analyzed. Methods: About 20 eyes of 20 healthy, young participants (mean age 23.15 years, standard deviation 2.3 years) were included in the analysis. Participants underwent ophthalmic diagnostics including three repeated SD-OCT examinations and measurement of POBF. The vessel shadow intensity analysis is based on peripapillary SD-OCT scans and automatically analyses the intensity of the distal vessel shadow compared to its surroundings. Results: The distal shadow of arteries in SD-OCT scans correlated with the POBF (r = 0.647, p = 0.002). Furthermore, the shadow intensity correlated with the established morphological arterio-venous ratio. The evaluation of repeatability was performed using the interclass correlation coefficient (ICC), showing good repeatability for individual vessels (ICC = 0.825) and arteries (ICC = 0.820). Conclusions: In summary, we indicate that the scattering properties of retinal vessels in SD-OCT images might correlate with the vessel morphology and for retinal arteries with the retinal blood flow volume as well. Further studies are needed to establish this method's sensitivity and specificity in participants with retinal and cardiovascular diseases.