Asymmetric pore windows in MOF membranes for natural gas valorization.

To use natural gas as a feedstock alternative to coal and oil, its main constituent, methane, needs to be isolated with high purity1. In particular, nitrogen dilutes the heating value of natural gas and is, therefore, of prime importance for removal2. However, the inertness of nitrogen and its similarities to methane in terms of kinetic size, polarizability and boiling point pose particular challenges for the development of energy-efficient nitrogen-removing processes3. Here we report a mixed-linker metal-organic framework (MOF) membrane based on fumarate (fum) and mesaconate (mes) linkers, Zr-fum67-mes33-fcu-MOF, with a pore aperture shape specific for effective nitrogen removal from natural gas. The deliberate introduction of asymmetry in the parent trefoil-shaped pore aperture induces a shape irregularity, blocking the transport of tetrahedral methane while allowing linear nitrogen to permeate. Zr-fum67-mes33-fcu-MOF membranes exhibit record-high nitrogen/methane selectivity and nitrogen permeance under practical pressures up to 50 bar, removing both carbon dioxide and nitrogen from natural gas. Techno-economic analysis shows that our membranes offer the potential to reduce methane purification costs by about 66% for nitrogen rejection and about 73% for simultaneous removal of carbon dioxide and nitrogen, relative to cryogenic distillation and amine-based carbon dioxide capture.

Bimetallic Metal Sites in Metal-Organic Frameworks Facilitate the Production of 1-Butene from Electrosynthesized Ethylene.

Converting CO2 to synthetic hydrocarbon fuels is of increasing interest. In light of progress in electrified CO2 to ethylene, we explored routes to dimerize to 1-butene, an olefin that can serve as a building block to ethylene longer-chain alkanes. With goal of selective and active dimerization, we investigate a series of metal-organic frameworks having bimetallic catalytic sites. We find that the tunable pore structure enables optimization of selectivity and that periodic pore channels enhance activity. In a tandem system for the conversion of CO2 to 1-C4H8, wherein the outlet cathodic gas from a CO2-to-C2H4 electrolyzer is fed directly (via a dehumidification stage) into the C2H4 dimerizer, we study the highest-performing MOF found herein: M' = Ru and M″ = Ni in the bimetallic two-dimensional M'2(OAc)4M″(CN)4 MOF. We report a 1-C4H8 production rate of 1.3 mol gcat-1 h-1 and a C2H4 conversion of 97%. From these experimental data, we project an estimated cradle-to-gate carbon intensity of -2.1 kg-CO2e/kg-1-C4H8 when CO2 is supplied from direct air capture and when the required energy is supplied by electricity having the carbon intensity of wind.

Aggregation Induced Emission-Based Covalent Organic Frameworks for High-Performance Optical Wireless Communication.

Here, we report the first utilization of covalent organic frameworks (COFs) in optical wireless communication (OWC) applications. In the solid form, aggregation-induced emission (AIE) luminogen often shows promising emissive characteristics that augment radiative decays and improve fluorescence. We have synthesized an AIE-COF through the Knoevenagel condensation reaction by taking advantage of the ability to carefully design and alter the COF structure by integrating an AIE luminogen with linear building blocks. The synthesized AIE-COF exhibited a high solid-state photoluminescence quantum yield (∼39%) and a short photoluminescence lifetime (∼1 ns), crucial for achieving modulation bandwidth for high-speed OWC applications. For comparison, we constructed an aggregation-caused quenching based COF, showing a similar lifetime but almost insignificant quantum yield. The orthogonal frequency-division multiplexing modulation strategy employed by the AIE-COF demonstrates remarkable high-rate data transmission, with a wide -3 dB modulation bandwidth of nearly 200 MHz and achieving high net data rates of 825 Mb/s, outperforming traditional materials. These results open new avenues for the ability to design and finetune new COF materials for their utilization as color converters in developing cutting-edge OWC components, enabling faster and more efficient data transfer.

Planar Core and Macrocyclic Shell Stabilized Atomically Precise Copper Nanocluster Catalyst for Efficient Hydroboration of C-C Multiple Bond.

Atomically precise metal nanoclusters (NCs) have become an important class of catalysts due to their catalytic activity, high surface area, and tailored active sites. However, the design and development of bond-forming reaction catalysts based on copper NCs are still in their early stages. Herein, we report the synthesis of an atomically precise copper nanocluster with a planar core and unique shell, [Cu45(TBBT)29(TPP)4(C4H11N)2H14]2+ (Cu45) (TBBT: 4-tert-butylbenzenethiol; TPP: triphenylphosphine), in high yield via a one-pot reduction method. The resulting structurally well-defined Cu45 is a highly efficient catalyst for the hydroboration reaction of alkynes and alkenes. Mechanistic studies show that a single-electron oxidation of the in situ-formed ate complex enables the hydroboration via the formation of boryl-centered radicals under mild conditions. This work demonstrates the promise of tailored copper nanoclusters as catalysts for C-B heteroatom bond-forming reactions. The catalysts are compatible with a wide range of alkynes and alkenes and functional groups for producing hydroborated products.

Advancing Membrane Technology: Ordered Macroporous ZIF-67 as a Filler in Mixed Matrix Membranes for Enhanced Propylene/Propane Separation.

Conventional separation technologies for valuable commodities require substantial energy, accounting for 10%-15% of global consumption. Mixed-matrix membranes (MMMs) offer a promising solution by combining processable polymers with selective inorganic fillers. Here, the potential of using ordered microporous structured materials is demonstrated as MMM fillers. The use of ordered macroporous ZIF-67 in combination with the well-known 6FDA-DAM polymer leads to superior performance in the important separation of propylene from propane. The enhanced performance can be rationalized with the help of advanced microscopy, which demonstrates that the polymer is able to penetrate the macroporous network around which the MOF (Metal-Organic Framework) is synthesized, resulting in a much better interphase between the two components and the homogeneous distribution of the filler, even at high loadings.

p/n-Type Polyimide Covalent Organic Frameworks for High-Performance Cathodes in Sodium-Ion Batteries.

Covalent organic frameworks (COFs) are viewed as promising organic electrode materials for metal-ion batteries due to their structural diversity and tailoring capabilities. In this work, firstly using the monomers N,N,N',N'-tetrakis(4-aminophenyl)-1,4-phenylenediamine (TPDA) and terephthaldehyde (TA), p-type phenylenediamine-based imine-linked TPDA-TA-COF is synthesized. To construct a bipolar redox-active, porous and highly crystalline polyimide-linked COF, i.e., TPDA-NDI-COF, n-type 1,4,5,8-naphthalene tetracarboxylic dianhydride (NDA) molecules are incorporated into p-type TPDA-TA-COF structure via postsynthetic linker exchange method. This tailored COF demonstrated a wide potential window (1.03.6 V vs Na+/Na) with dual redox-active centers, positioning it as a favorable cathode material for sodium-ion batteries (SIBs). Owing to the inheritance of multiple redox functionalities, TPDA-NDI-COF can deliver a specific capacity of 67 mAh g-1 at 0.05 A g-1, which is double the capacity of TPDA-TA-COF (28 mAh g-1). The incorporation of carbon nanotube (CNT) into the TPDA-NDI-COF matrix resulted in an enhancement of specific capacity to 120 mAh g-1 at 0.02 A g-1. TPDA-NDI-50%CNT demonstrated robust cyclic stability and retained a capacity of 92 mAh g-1 even after 10 000 cycles at 1.0 A g-1. Furthermore, the COF cathode exhibited an average discharge voltage of 2.1 V, surpassing the performance of most reported COF as a host material.

Porous Organic Polymers for Efficient and Selective SO2 Capture from CO2-rich Flue Gas.

The quest for effective technologies to reduce SO2 pollution is crucial due to its adverse effects on the environment and human health. Markedly, removing a ppm level of SO2 from CO2-containing waste gas is a persistent challenge, and current technologies suffer from low SO2/CO2 selectivity and energy-intensive regeneration processes. Here using the molecular building blocks approach and theoretical calculation, we constructed two porous organic polymers (POPs) encompassing pocket-like structures with exposed imidazole groups, promoting preferential interactions with SO2 from CO2-containing streams. Markedly, the evaluated POPs offer outstanding SO2/CO2 selectivity, high SO2 capacity, and an easy regeneration process, making it one of the best materials for SO2 capture. To gain better structural insights into the notable SO2 selectivity of the POPs, we used dynamic nuclear polarization NMR spectroscopy (DNP) and molecular modelling to probe the interactions between SO2 and POP adsorbents. The newly developed materials are poised to offer an energy-efficient and environment-friendly SO2 separation process while we are obliged to use fossil fuels for our energy needs.

Translocation and Confinement of Tetraamines in Adaptable Microporous Cavities.

Metal-Organic Frameworks can be grafted with amines by coordination to metal vacancies to create amine-appended solid adsorbents, which are being considered as an alternative to using aqueous amine solutions for CO2 capture. In this study, we propose an alternative mechanism that does not rely on the use of neutral metal vacancies as binding sites but is enabled by the structural adaptability of heterobimetallic Ti2Ca2 clusters. The combination of hard (Ti4+) and soft (Ca2+) metal centers in the inorganic nodes of the framework enables MUV-10 to adapt its pore windows to the presence of triethylenetetramine molecules. This dynamic cluster response facilitates the translocation and binding of tetraamine inside the microporous cavities to enable the formation of bis-coordinate adducts that are stable in water. The extension of this grafting concept from MUV-10 to larger cavities not restrictive to CO2 diffusion will complement other strategies available for the design of molecular sorbents for decarbonization applications.

A Tailored COF for Visible-Light Photosynthesis of 2,3-Dihydrobenzofurans.

Heterogeneous photocatalysis is considered as an ecofriendly and sustainable approach for addressing energy and environmental persisting issues. Recently, heterogeneous photocatalysts based on covalent organic frameworks (COFs) have gained considerable attention due to their remarkable performance and recyclability in photocatalytic organic transformations, offering a prospective alternative to homogeneous photocatalysts based on precious metal/organic dyes. Herein, we report Hex-Aza-COF-3 as a metal-free, visible-light-activated, and reusable heterogeneous photocatalyst for the synthesis of 2,3-dihydrobenzofurans, as a pharmaceutically relevant structural motif, via the selective oxidative [3+2] cycloaddition of phenols with olefins. Moreover, we demonstrate the synthesis of natural products (±)-conocarpan and (±)-pterocarpin via the [3+2] cycloaddition reaction as an important step using Hex-Aza-COF-3 as a heterogeneous photocatalyst. Interestingly, the presence of phenazine and hexaazatriphenylene as rigid heterocyclic units in Hex-Aza-COF-3 strengthens the covalent linkages, enhances the absorption in the visible region, and narrows the energy band, leading to excellent activity, charge transport, stability, and recyclability in photocatalytic reactions, as evident from theoretical calculations and real-time information on ultrafast spectroscopic measurements.

Engineering Metal-Organic Frameworks with Tunable Colors for High-Performance Wireless Communication.

Metal-organic frameworks (MOFs) have emerged as excellent platforms possessing tunable and controllable optical behaviors that are essential in high-speed and multichannel data transmission in optical wireless communications (OWCs). Here, we demonstrate a novel approach to achieving a tunable wide modulation bandwidth and high net data rate by engineering a combination of organic linkers and metal clusters in MOFs. More specifically, two organic linkers of different emission colors, but equal molecular length and connectivity, are successfully coordinated by zirconium and hafnium oxy-hydroxy clusters to form the desired MOF structures. The precise change in the interactions between these different organic linkers and metal clusters enables control over fluorescence efficiency and excited state lifetime, leading to a tunable modulation bandwidth from 62.1 to 150.0 MHz and a net data rate from 303 to 363 Mb/s. The fabricated color converter MOFs display outstanding performance that competes, and in some instances surpasses, those of conventional materials commonly used in light converter devices. Moreover, these MOFs show high practicality in color-pure wavelength-division multiplexing (WDM), which significantly improved the data transmission link capacity and security by the contemporary combining of two different data signals in the same path. This work highlights the potential of engineered MOFs as a game-changer in OWCs, with significant implications for future high-speed and secure data transmission.

Advances in metal-organic framework-based membranes.

Membrane-based separations have garnered considerable attention owing to their high energy efficiency, low capital cost, small carbon footprint, and continuous operation mode. As a class of highly porous crystalline materials with well-defined pore systems and rich chemical functionalities, metal-organic frameworks (MOFs) have demonstrated great potential as promising membrane materials over the past few years. Different types of MOF-based membranes, including polycrystalline membranes, mixed matrix membranes (MMMs), and nanosheet-based membranes, have been developed for diversified applications with remarkable separation performances. In this comprehensive review, we first discuss the general classification of membranes and outline the historical development of MOF-based membranes. Subsequently, particular attention is devoted to design strategies for MOF-based membranes, along with detailed discussions on the latest advances on these membranes for various gas and liquid separation processes. Finally, challenges and future opportunities for the industrial implementation of these membranes are identified and outlined with the intent of providing insightful guidance on the design and fabrication of high-performance membranes in the future.

A Zeolite-Like Metal-Organic Framework Based Membrane for Reverse Selective Hydrogen Separation and Butane Isomer Sieving.

Here, the fabrication of a defect-free membrane that is based on a zeolite-like metal-organic framework (ZMOF) with the underlying ana topology is reported. The unique ana-ZMOF structure provides high degree of pore connectivity, which is reflected by the fast transport of gases. Prominently, it offers an optimum pore-aperture size, affording notable sieving selectivity for butane/isobutane, and optimal pore energetics for reverse CO2 /H2 separation. This emphasize the potential for the application of pure MOF membranes, paving the way to more sustainability of energy resources.

Fluorine-Boosted Kinetic and Selective Molecular Sieving of C6 Derivatives.

Porous molecular sorbents have excellent selectivity towards hydrocarbon separation with energy saving techniques. However, to realize commercialization, molecular sieving processes should be faster and more efficient compared to extended frameworks. In this work, we show that utilizing fluorine to improve the hydrophobic profile of leaning pillararenes affords a substantial kinetic selective adsorption of benzene over cyclohexane (20 : 1 for benzene). The crystal structure shows a porous macrocycle that acts as a perfect match for benzene in both the intrinsic and extrinsic cavities with strong interactions in the solid state. The fluorinated leaning pillararene surpasses all reported organic molecular sieves and is comparable to the extended metal-organic frameworks that were previously employed for this separation such as UIO-66. Most importantly, this sieving system outperformed the well-known zeolitic imidazolate frameworks under low pressure, which opens the door to new generations of molecular sieves that can compete with extended frameworks for more sustainable hydrocarbon separation.

Atomically Precise Defective Copper Nanocluster Catalysts for Highly Selective C-C Cross-Coupling Reactions.

Point defects in nanoparticles have long been hypothesized to play an important role in governing the particle's electronic structure and physicochemical properties. However, single point defects in material systems usually exist with other heterogeneities, obscuring the chemical role of the effects. Herein, we report the synthesis of novel atomically precise, copper hydride nanoclusters (NCs), [Cu28 H10 (C7 H7 S)18 (TPP)3 ] (Cu28 ; TPP: triphenylphosphine; C7 H7 S: o-thiocresol) with a defined defect in the gram scale via a one-pot reduction method. The Cu28 acts as a highly selective catalyst for C-C cross-couplings. The work highlights the potential of defective NCs as model systems for investigating individual defects, correlating defects with physiochemical properties, and rationally designing new nanoparticle catalysts.

Metal-Organic Frameworks in Mixed-Matrix Membranes for High-Speed Visible-Light Communication.

Mixed-matrix membranes (MMMs) based on luminescent metal-organic frameworks (MOFs) and emissive polymers with the combination of their unique advantages have great potential in separation science, sensing, and light-harvesting applications. Here, we demonstrate MMMs for the field of high-speed visible-light communication (VLC) using a very efficient energy transfer strategy at the interface between a MOF and an emissive polymer. Our steady-state and ultrafast time-resolved experiments, supported by high-level density functional theory calculations, revealed that efficient and ultrafast energy transfer from the luminescent MOF to the luminescent polymer can be achieved. The resultant MMMs exhibited an excellent modulation bandwidth of around 80 MHz, which is higher than those of most well-established color-converting phosphors commonly used for optical wireless communication. Interestingly, we found that the efficient energy transfer further improved the light communication data rate from 132 Mb/s of the pure polymer to 215 Mb/s of MMMs. This finding not only showcases the promise of the MMMs for high-speed VLC but also highlights the importance of an efficient and ultrafast energy transfer strategy for the advancement of data rates of optical wireless communication.

The Importance of Highly Connected Building Units in Reticular Chemistry: Thoughtful Design of Metal-Organic Frameworks.

The prediction of crystal structures assembled in three dimensions has been considered for a long time, simultaneously as a chemical wasteland and a certain growth point of the chemistry of the future. Less than 30 years after Roald Hoffmann's statement, we can categorically affirm that the elevation of reticular chemistry and the introduction of metal-organic frameworks (MOFs) significantly tackled this tridimensional assembly issue. MOFs result from the assembly of organic polytopic organic ligands bridging metal nodes, clusters, chains, or layers together into mostly three-periodic open frameworks. They can exhibit extremely high porosity and offer great potential as revolutionary catalysts, drug carrier systems, sensors, smart materials, and, of course, separation agents. Overall, the progressive development of reticular chemistry has been a game changer in materials chemistry during the last 25 years.Such diverse properties often result not only from the selected organic and inorganic molecular building blocks (MBBs) but also from their distribution within the framework. Indeed, the size and shape of the porous system, as well as the location of active sites influence the overall properties. Therefore, in the continuity of achieving the crystallization of three-periodic structures, chemists and crystal engineers faced the next challenge, as summarized by John Maddox: "it remains in general impossible to predict the structure of even the simplest crystallographic solids from knowledge of their chemical composition". This is where rational design takes place.In this Account, we detail three specific approaches developed by our group to facilitate the design and assembly of finely tuned MOFs. All are based on careful geometrical consideration and a deep study and understanding of the existing nets and topologies. We recognized that highly connected nets, if possible, edge-transitive, are ideal blueprints because their number is limited in contrast to nets with lower connectivity. Therefore, we embarked on taking advantage of existing highly connected MBBs, or, in parallel, promoting their formation to meet our requirements. This is achieved by utilizing externally decorated metal-organic polyhedra as supermolecular building blocks (SBBs), serving as a net-coding building unit, comprising the requisite connectivity and directional information coding for the chosen nets. The SBB approach allowed the synthesis of several families of SBB-based MOFs, including fcu, rht, and gea-MOFs, that are detailed here.The second strategy is directly inherited from the success of the SBB approach. In seeking highly connected building units, our group naturally expanded its research focus to nets that can be deconstructed into layers, pillared in various ways. In the supermolecular building layer (SBL) approach, the layers have an almost infinite connectivity, and the framework backbone is fixed in two dimensions while the third is free for pillar expansion and functionalization. The cases of trigonal pillaring leading to rtl, eea, and apo MOFs as well as the quadrangular pillaring leading to a family of tbo-MOFs are discussed here, along with recent cases of highly connected pillars in pek and aea-MOFs.Finally, our experience with highly coordinated MBBs led us to develop a novel way to use them as secondary building units of lower connectivity and unlock the possibility of assembling a novel class of zeolite-like MOFs (ZMOFs). The case of the Zr-sod-ZMOFs designed through a cantellation strategy is described as a future leading direction of MOF design.

Reticular Chemistry for the Construction of Highly Porous Aluminum-Based nia-Metal-Organic Frameworks.

Edge-transitive nets are regarded as appropriate blueprints for the practice of reticular chemistry, and in particular, for the rational design and synthesis of functional metal-organic frameworks (MOFs). Among edge-transitive nets, type I edge-transitive nets have unique coordination figures, offering only one edge-transitive target for their associated expressed net-cBUs. Here, we report the reticulation of the binodal edge-transitive (6, 6)-c nia net in MOF chemistry, namely, the deliberate assembly of trinuclear aluminum clusters and 6-connected hexacarboxylate ligands into highly porous nia-MOFs. Further studies reveal that Al-nia-MOF-1 shows promising attributes as a storage media for oxygen (O2) at high-pressure adsorption studies.

Reticular Chemistry 3.2: Typical Minimal Edge-Transitive Derived and Related Nets for the Design and Synthesis of Metal-Organic Frameworks.

Reticular chemistry has proven as a notable/distinctive discipline aimed at the deliberate assembly of periodic solids, offering great opportunities to effectively deploy the gained knowledge on net-topologies as a guide and toolbox for designed syntheses, based on the assembly of molecular building blocks into targeted and anticipated structures of crystalline extended solids. The effective practice of reticular chemistry has enriched the repertoire of crystal chemistry and afforded notable accelerating development of crystalline extended frameworks, especially metal-organic frameworks (MOFs). Here, we review a special class of trinodal MOF structures based on the reticulation of special minimal edge-transitive nets (nets with transitivity [3 2], three distinct nodes and two kind of edges) derived from edge-transitive nets (one kind of edge). The rationale for deriving these special minimal edge-transitive nets is reviewed, and their associated net-coded building (net-cBUs) for the design of trinodal MOFs is presented and discussed. The resultant inclusive list of the enumerated minimal edge-transitive nets provides a unique toolbox for the material's designer as it offers ideal blueprints for the deliberate design and rational assembly of building blocks with embedded multiple branch points into intricate trinodal MOFs.

Adsorptive Molecular Sieving of Styrene over Ethylbenzene by Trianglimine Crystals.

The separation of styrene (ST) and ethylbenzene (EB) mixtures is of great importance in the petrochemical and plastics industries. Current technology employs multiple cycles of energy-intensive distillation due to the very close boiling points of ST and EB. Here, we show that the molecular sieving properties of easily scalable and stable trianglimine crystals offer ultrahigh selectivity (99%) for styrene separation. The unique molecular sieving properties of trianglimine crystals are corroborated by DFT calculations, suggesting that the incorporation of the nonplanar EB requires a significant deformation of the macrocyclic cavity whereas the planar ST can be easily accommodated in the cavity.

High-Capacity NH4+ Charge Storage in Covalent Organic Frameworks.

Ammonium ions (NH4+), as non-metallic charge carriers, have spurred great research interest in the realm of aqueous batteries. Unfortunately, most inorganic host materials used in these batteries are still limited by the sluggish diffusion kinetics. Here, we report a unique hydrogen bond chemistry to employ covalent organic frameworks (COFs) for NH4+ ion storage, which achieves a high capacity of 220.4 mAh g-1 at a current density of 0.5 A g-1. Combining the theoretical simulation and materials analysis, a universal mechanism for the reaction of nitrogen and oxygen bridged by hydrogen bonds is revealed. In addition, we explain the solvation behavior of NH4+, leading to a relationship between redox potential and desolvation energy barrier. This work provides a new insight into NH4+ ion storage in host materials based on hydrogen bond chemistry. This mechanism can be leveraged to design and develop COFs for electrochemical energy storage.