Increase in the effective viscosity of polyethylene under extreme nanoconfinement.

Understanding polymer transport in nanopores is crucial for optimizing heterogeneously catalyzed processes in polymer upcycling and fabricating high-performance nanocomposite films and membranes. Although confined polymer dynamics have been extensively studied, the behavior of polyethylene (PE)-the most widely used commodity polymer-in pores smaller than 20 nm remains largely unexplored. We investigate the effects of extreme nanoconfinement on PE transport using capillary rise infiltration in silica nanoparticle packings with average pore radii ranging from ∼1 to ∼9 nm. Using in situ ellipsometry and the Lucas-Washburn model, we discover a previously unknown inverse relationship between effective viscosity (ηeff) and average pore radius (Rpore). Additonally, we determine that PE transport under these extreme conditions is primarily governed by physical confinement, rather than pore surface chemistry. We refine an existing theory to provide a generalized formalism to describe the polymer transport dynamics over a wide range of pore radii (from 1 nm and larger). Our results offer valuable insights for optimizing catalyst supports in polymer upcycling and improving infiltration processes for nanocomposite fabrication.

Nanostructured Block Polymer Electrolytes: Tailoring Self-Assembly to Unlock the Potential in Lithium-Ion Batteries.

ConspectusIon-containing solid block polymer (BP) electrolytes can self-assemble into microphase-separated domains to facilitate the independent optimization of ion conduction and mechanical stability; this assembly behavior has the potential to improve the functionality and safety of lithium-ion batteries over liquid electrolytes to meet future demands (e.g., large capacities and long lifetimes) in various applications. However, significant enhancements in the ionic conductivity and processability of BPs must be realized for BP-based electrolytes to become robust alternatives in commercial devices. Toward this end, the controlled modification of BP electrolytes' intra-domain (nanometer-scale) and multi-grain (micrometer-scale) structure is one viable approach; intra-domain ion transport and segmental compatibility (related to the effective Flory-Huggins parameter, χeff) can be increased by tuning the ion and monomer-segment distributions, and the morphology can be selected such that the multi-grain transport is less sensitive to grain size and orientation.To highlight the characteristics of intra-domain structure that promote efficient ion transport, this Account begins by describing the relationship between BP thermodynamics (namely, χeff and the statistical segment length, b, which is indicative of chain stiffness) and local ion concentration. These thermodynamic insights are vital because they inform the selection of synthesis and formulation variables, such as polymer and ion chemistry, polymer molecular weight and composition, and ion concentration, which boost electrolyte performance. In addition to its relationship with local ion transport, χeff is also an important factor with respect to electrolyte processability. For example, a reduced χeff can allow BP electrolytes to be processed at lower temperatures (i.e., lower energy input), with less solvent (i.e., reduced waste), and/or for shorter times (i.e., higher throughput) yet still form desired nanostructures. This Account also examines the impact of electrolyte preparation and processing on the ion transport across nanostructured grains because of grain size and orientation. As morphologies with a 3D-connected versus 2D-connected conducting phase show different sensitivities to conductivity losses that can occur because of the fabrication methods, it is necessary to account for electrolyte processing effects when probing ion transport.The intra-domain and micrometer-scale structure also can be tuned using either tapered BPs (macromolecules with modified monomer-segment composition profiles between two homogeneous blocks) or blends of BPs and homopolymers, independent of the BP molecular weight and composition, as detailed herein. The application of TBPs or BP/HP blends as ion-conducting materials leads to improved ion transport, reduced χeff, and greater availability of morphologies with 3D connectivity relative to traditional (non-tapered and unblended) BP electrolytes. This feature results from the fact that ion transport is related more closely to the monomer-segment distributions within a domain than the overall nanoscale morphology or average polymer/ion mobilities. Taken together, this Account describes how ion transport and processability are influenced by BP architecture and nanostructural features, and it provides avenues to tune nanoassemblies that can contribute to improved lithium-ion battery technologies to meet future demands.

Building resiliency to climate change uncertainty through bioretention design modifications.

Climate stationarity is a traditional assumption in the design of the urban drainage network, including green infrastructure practices such as bioretention cells. Predicted deviations from historic climate trends associated with global climate change introduce uncertainty in the ability of these systems to maintain service levels in the future. Climate change projections are made using output from coarse-scale general circulation models (GCMs), which can then be downscaled using regional climate models (RCMs) to provide predictions at a finer spatial resolution. However, all models contain sources of error and uncertainty, and predicted changes in future climate can be contradictory between models, requiring an approach that considers multiple projections. The performance of bioretention cells were modeled using USEPA's Storm Water Management Model (SWMM) to determine how design modifications could add resilience to these systems under future climate conditions projected for Knoxville, Tennessee, USA. Ten downscaled climate projections were acquired from the North American Coordinated Regional Downscaling Experiment program, and model bias was corrected using Kernel Density Distribution Mapping (KDDM). Bias-corrected climate projections were used to assess bioretention hydrologic function in future climate conditions. Several scenarios were evaluated using a probabilistic approach to determine the confidence with which design modifications could be implemented to maintain historic performance for both new and existing (retrofitted) bioretention cells. The largest deviations from current design (i.e., concurrently increasing ponding depths, thickness of media layer, media conductivity rates, and bioretention surface areas by 307%, 200%, 200%, and 300%, respectively, beyond current standards) resulted in the greatest improvements on historic performance with respect to annual volumes of infiltration and surface overflow, with all ten future climate scenarios across various soil types yielding increased infiltration and decreased surface overflow compared to historic conditions. However, lower performance was observed for more conservative design modifications; on average, between 13-82% and 77-100% of models fell below historic annual volumes of infiltration and surface overflow, respectively, when ponding zone depth, media layer thickness, and media conductivity were increased alone. Findings demonstrate that increasing bioretention surface area relative to the contributing catchment provides the greatest overall return on historic performance under future climate conditions and should be prioritized in locations with low in situ soil drainage rates. This study highlights the importance of considering local site conditions and management objectives when incorporating resiliency to climate change uncertainty into bioretention designs.

Block Copolymer Vitrimers.

In this report, we merge block copolymers with vitrimers in an effort to realize the prospect of higher-order, nanoscale control over associative cross-link exchange and flow. We show the use of controlled polymerization as a vital tool to understand fundamental structure-property effects through the precise control of polymer architecture and molecular weight. Vitrimers derived from self-assembling block copolymers exhibit superior resistance to macroscopic deformation in comparison to their analogs generated from statistical copolymers. Our results suggest that the enhanced creep resistance achieved by control over chain topology in block vitrimers can be used to tune viscoelastic properties. The resistance to macroscopic deformation that arises from a microphase-separated structure in this new class of materials differentiates block vitrimers from their statistical counterparts and introduces the potential of topology-control over viscoelastic flow.

Anionic Polymer and Quantum Dot Excipients to Facilitate siRNA Release and Self-Reporting of Disassembly in Stimuli-Responsive Nanocarrier Formulations.

The incorporation of anionic excipients into polyplexes is a promising strategy for modulating siRNA binding versus release and integrating diagnostic capabilities; however, specific design criteria and structure-function relationships are needed to facilitate the development of nanocarrier-based theranostics. Herein, we incorporated poly(acrylic acid) (PAA) and quantum dot (QD) excipients into photolabile siRNA polyplexes to increase gene silencing efficiencies by up to 100% and enable self-reporting of nanocarrier disassembly. Our systematic approach identified the functional relationships between gene silencing and key parameters such as excipient loading fractions and molecular weights that facilitated the establishment of design rules for optimization of nanocarrier efficacy. For example, we found that PAA molecular weights ∼10-20× greater than that of the coencapsulated siRNA exhibited the most efficient release and silencing. Furthermore, siRNA release assays and RNAi modeling allowed us to generate a PAA "heat map" that predicted gene silencing a priori as a function of PAA molecular weight and loading fraction. QDs further promoted selective siRNA release and provided visual as well as Förster resonance energy transfer (FRET)-based monitoring of the dynamic changes in nanostructure in situ. Moreover, even with the addition of anionic components, our formulations exhibited substantially improved stability and shelf life relative to typical formulations, with complete stability after a week of storage and full activity in the presence of serum. Taken together, this study enabled synergistic improvements in siRNA release and diagnostic capabilities, along with the development of mechanistic insights that are critical for advancing the translation of nucleic acid theranostics into the clinic.

Synthesis and characterization of bicontinuous cubic poly(3,4-ethylene dioxythiophene) gyroid (PEDOT GYR) gels.

We describe the synthesis and characterization of bicontinuous cubic poly(3,4-ethylenedioxythiophene) (PEDOT) conducting polymer gels prepared within lyotropic cubic poly(oxyethylene)10 nonylphenol ether (NP-10) templates with Ia3[combining macron]d (gyroid, GYR) symmetry. The chemical polymerization of EDOT monomer in the hydrophobic channels of the NP-10 GYR phase was initiated by AgNO3, a mild oxidant that is activated when exposed to ultraviolet (UV) radiation. The morphology and physical properties of the resulting PEDOT gels were examined as a function of temperature and frequency using optical and electron microscopy, small-angle X-ray scattering (SAXS), dynamic mechanical spectroscopy, and electrochemical impedance spectroscopy (EIS). Microscopy and SAXS results showed that the PEDOT gels remained ordered and stable after the UV-initiated chemical polymerization, confirming the successful templated-synthesis of PEDOT in bicontinuous GYR nanostructures. In comparison to unpolymerized 3,4-ethylenedioxythiophene (EDOT) gel phases, the PEDOT structures had a higher storage modulus, presumably due to the formation of semi-rigid PEDOT-rich nanochannels. Additionally, the storage modulus (G') for PEDOT gels decreased only modestly with increasing temperature, from ∼1.2 × 10(5) Pa (10 °C) to ∼7 × 10(4) Pa (40 °C), whereas G' for the NP-10 and EDOT gels decreased dramatically, from ∼5.0 × 10(4) Pa (10 °C) to ∼1.5 × 10(2) Pa (40 °C). EIS revealed that the impedance of the PEDOT gels was smaller than the impedance of EDOT gels at both high frequencies (PEDOT ∼10(2) Ω and EDOT 2-3 × 10(4) Ω at 10(5) Hz) and low frequencies (PEDOT 10(3)-10(5) Ω and EDOT ∼5 × 10(5) Ω at 10(-1) Hz). These results indicated that PEDOT gels were highly ordered, mechanically stable and electrically conductive, and thus should be of interest for applications for which such properties are important, including low impedance and compliant coatings for biomedical electrodes.

PEG-polypeptide block copolymers as pH-responsive endosome-solubilizing drug nanocarriers.

Herein we report the potential of click chemistry-modified polypeptide-based block copolymers for the facile fabrication of pH-sensitive nanoscale drug delivery systems. PEG-polypeptide copolymers with pendant amine chains were synthesized by combining N-carboxyanhydride-based ring-opening polymerization with post-functionalization using azide-alkyne cycloaddition. The synthesized block copolymers contain a polypeptide block with amine-functional side groups and were found to self-assemble into stable polymersomes and disassemble in a pH-responsive manner under a range of biologically relevant conditions. The self-assembly of these block copolymers yields nanometer-scale vesicular structures that are able to encapsulate hydrophilic cytotoxic agents like doxorubicin at physiological pH but that fall apart spontaneously at endosomal pH levels after cellular uptake. When drug-encapsulated copolymer assemblies were delivered systemically, significant levels of tumor accumulation were achieved, with efficacy against the triple-negative breast cancer cell line, MDA-MB-468, and suppression of tumor growth in an in vivo mouse model.

Biobased building blocks for the rational design of renewable block polymers.

Block polymers (BPs) derived from biomass (biobased) are necessary components of a sustainable future that relies minimally on petroleum-based plastics for applications ranging from thermoplastic elastomers and pressure-sensitive adhesives to blend compatibilizers. To facilitate their adoption, renewable BPs must be affordable, durable, processable, versatile, and reasonably benign. Their desirability further depends on the relative sustainability of the renewable resources and the methods employed in the monomer and polymer syntheses. Various strategies allow these BPs' characteristics to be tuned and enhanced for commercial applications, and many of these techniques also can be applied to manipulate the wide-ranging mechanical and thermal properties of biobased and self-assembling block polymers. From feedstock to application, this review article highlights promising renewable BPs, plus their material and assembly properties, in support of de novo design strategies that could revolutionize material sustainability.

Stimuli-responsive copolymer solution and surface assemblies for biomedical applications.

Stimuli-responsive polymeric materials is one of the fastest growing fields of the 21st century, with the annual number of papers published more than quadrupling in the last ten years. The responsiveness of polymer solution assemblies and surfaces to biological stimuli (e.g. pH, reduction-oxidation, enzymes, glucose) and externally applied triggers (e.g. temperature, light, solvent quality) shows particular promise for various biomedical applications including drug delivery, tissue engineering, medical diagnostics, and bioseparations. Furthermore, the integration of copolymer architectures into stimuli-responsive materials design enables exquisite control over the locations of responsive sites within self-assembled nanostructures. The combination of new synthesis techniques and well-defined copolymer self-assembly has facilitated substantial developments in stimuli-responsive materials in recent years. In this tutorial review, we discuss several methods that have been employed to synthesize self-assembling and stimuli-responsive copolymers for biomedical applications, and we identify common themes in the response mechanisms among the targeted stimuli. Additionally, we highlight parallels between the chemistries used for generating solution assemblies and those employed for creating copolymer surfaces.

Which Lipid Nanoparticle (LNP) Designs Work? A Simple Kinetic Model Linking LNP Chemical Structure to In Vivo Delivery Performance.

Although lipid nanoparticles (LNPs) are the predominant nanocarriers for short-interfering RNA (siRNA) delivery, most therapies use nearly identical formulations that have taken 30 years to design but lack the diverse property ranges necessary for versatile application. This dearth in variety and the extended timeline for implementation are attributed to a limited understanding of how LNP properties facilitate overcoming biological barriers. Herein, a simple kinetic model was developed by using major rate-limiting steps for siRNA delivery, and this model enabled the identification of a critical parameter to predict LNP efficacy without extensive experimental testing. A volume-averaged log D, the "solubility" of charged molecules as a function of pH weighted by component volume fractions, resulted in a good correlation between LNP composition and siRNA delivery. Both the effects of modifying the structures of ionizable lipids and LNP composition on gene silencing were easily captured in the model predictions. Thus, this approach provides a robust LNP structure-activity relationship to dramatically accelerate the realization of effective LNP formulations.

Lignin-derivable alternatives to bisphenol A with potentially undetectable estrogenic activity and minimal developmental toxicity.

Lignin-derivable bisguaiacols/bissyringols are viable alternatives to commercial bisphenols; however, many bisguaiacols/bissyringols (e.g., bisguaiacol F [BGF]) have unsubstituted bridging carbons between the aromatic rings, making them more structurally similar to bisphenol F (BPF) than bisphenol A (BPA) - both of which are suspected endocrine disruptors. Herein, we investigated the estrogenic activity (EA) and developmental toxicity of dimethyl-substituted bridging carbon-based lignin-derivable bisphenols (bisguaiacol A [BGA] and bissyringol A [BSA]). Notably, BSA showed undetectable EA at seven test concentrations (from 10-12 M to 10-6 M) in the MCF-7 cell proliferation assay, whereas BPA had detectable EA at five concentrations (from 10-10 M to 10-6 M). In silico results indicated that BSA had the lowest binding affinity with estrogen receptors. Moreover, in vivo chicken embryonic assay results revealed that lignin-derivable monomers had minimal developmental toxicity vs. BPA at environmentally relevant test concentrations (8.7-116 µg/kg). Additionally, all lignin-derivable compounds showed significantly lower expression fold changes (from ∼1.81 to ∼4.41) in chicken fetal liver tests for an estrogen-response gene (apolipoprotein II) in comparison to BPA (fold change of ∼11.51), which was indicative of significantly reduced estrogenic response. Altogether, the methoxy substituents on lignin-derivable bisphenols appeared to be a positive factor in reducing the EA of BPA alternatives.

Electrophoretic Deposition as a Versatile Low-Cost Tool to Construct a Synthetic Polymeric Solid-Electrolyte Interphase on Silicon Anodes: A Model System Investigation.

The cycling of next-generation, high-capacity silicon (Si) anodes capable of 3579 mAh·g-1 is greatly hindered by the instability of the solid-electrolyte interphase (SEI). The large volume changes of Si during (de)lithiation cause continuous cracking of the SEI and its reconstruction, leading to loss of lithium inventory and extensive consumption of electrolyte. The SEI formed in situ during cell cycling is mostly composed of molecular fragments and oligomers, the structure of which is difficult to tailor. In contrast, ex situ formation of a synthetic SEI provides greater flexibility to deposit long-chain, polymeric, and elastomeric components potentially capable of maintaining integrity against the large ∼350% volume expansion of Si while also enabling electronic passivation of the surface for longer cycling and calendar life. Furthermore, polymers are amenable to structural modifications, and the desired elasticity can be targeted by selection of the SEI polymer feedstock. Herein, electrophoretic deposition (EPD) is used to apply chitosan as a synthetic SEI on model Si thin film electrodes. Comparison of synthetic SEIs obtained without (Si/Chit) and with CH3COOLi (Si/Chit+CH3COOLi) added during EPD is performed to demonstrate a facile route to tuning of the polymer SEI chemistry. Atomic force and scanning electron microscopy reveal that addition of CH3COOLi at EPD assists in conformal deposition of the synthetic SEI. During electrochemical cycling, the Chit+CH3COOLi coating nearly doubles the capacity retention versus the reference bare Si thin film. X-ray photoelectron and Fourier transform infrared spectroscopy reveal that CH3COOLi caps the -NH2 groups of chitosan through amidation during EPD, which suppresses the catalytic reduction of the electrolyte. The presented approach demonstrates and validates EPD as a low-capital route to achieving and chemistry-tuning synthetic SEIs on Si electrodes. More broadly, the method is a promising avenue toward controlled and tailored polymeric SEIs on various conversion-type electrodes with high particle volumetric expansion.

Hydrogenolysis of Poly(Ethylene-co-Vinyl Alcohol) and Related Polymer Blends over Ruthenium Heterogeneous Catalysts.

The hydrogenolysis of polymers is emerging as a promising approach to deconstruct plastic waste into valuable chemicals. Yet, the complexity of plastic waste, including multilayer packaging, is a significant barrier to handling realistic waste streams. Herein, we reveal fundamental insights into a new chemical route for transforming a previously unaddressed fraction of plastic waste - poly(ethylene-co-vinyl alcohol) (EVOH) and related polymer blends - into alkane products. We report that Ru/ZrO2 is active for the concurrent hydrogenolysis, hydrogenation, and hydrodeoxygenation of EVOH and its thermal degradation products into alkanes (C1-C35) and water. Detailed reaction data, product analysis, and catalyst characterization reveal that the in-situ thermal degradation of EVOH forms aromatic intermediates that are detrimental to catalytic activity. Increased hydrogen pressure promotes hydrogenation of these aromatics, preventing catalyst deactivation and improving alkane product yields. Calculated apparent rates of C-C scission reveal that the hydrogenolysis of EVOH is slower than low-density polyethylene. We apply these findings to achieve hydrogenolysis of EVOH/polyethylene blends and elucidate the sensitivity of hydrogenolysis catalysts to such blends. Overall, we demonstrate progress towards efficient catalytic processes for the hydroconversion of waste multilayer film plastic packaging into valuable products.

Toward Circular Recycling of Polyurethanes: Depolymerization and Recovery of Isocyanates.

We report a depolymerization strategy to nearly quantitatively regenerate isocyanates from thermoplastic and thermoset polyurethanes (PUs) and then resynthesize PUs using the recovered isocyanates. To date, chemical/advanced recycling of PUs has focused primarily on the recovery of polyols and diamines under comparatively harsh conditions (e.g., high pressure and temperature), and the recovery of isocyanates has been difficult. Our approach leverages an organoboron Lewis acid to depolymerize PUs directly to isocyanates under mild conditions (e.g., ∼80 °C in toluene) without the need for phosgene or other harsh reagents, and we show that both laboratory-synthesized and commercially sourced PUs can be depolymerized. Furthermore, we demonstrate the utility of the recovered isocyanate in the production of second-generation PUs with thermal properties and molecular weights similar to those of the virgin PUs. Overall, this route uniquely provides an opportunity for circularity in PU materials and can add significant value to end-of-life PU products.

Interfacial manipulations: controlling nanoscale assembly in bulk, thin film, and solution block copolymer systems.

Nanostructured soft materials from self-assembled block copolymers (BCP)s and polymer blends can enable the reliable, high-throughput, and cost-effective generation of nanoscale structural motifs for many emerging technologies. Our research group has studied the phase behavior of BCPs in bulk, thin film, and solution environments with a particular focus on using interfacial manipulations to control self-assembly and to access a vast array of nanoscale morphologies and orientations. These interfacial manipulations can be synthetic alterations that are directly incorporated into the BCP chain to modify polymer-polymer interactions, post-polymerization and non-synthetic modifications that affect block interactions, or changes to the polymer specimen's external surroundings to control self-assembly in a confining environment. Herein, we describe methods that we have employed to manipulate BCP self-assembly for various application targets, and we discuss the key effects of such manipulations on the resulting nanoscale morphologies.

Ionic-Liquid-Mediated Deconstruction of Polymers for Advanced Recycling and Upcycling.

Ionic liquids (ILs) are a promising medium to assist in the advanced (chemical and biological) recycling of polymers, owing to their tunable catalytic activity, tailorable chemical functionality, low vapor pressures, and thermal stability. These unique physicochemical properties, combined with ILs' capacity to solubilize plastics waste and biopolymers, offer routes to deconstruct polymers at reduced temperatures (and lower energy inputs) versus conventional bulk and solvent-based methods, while also minimizing unwanted side reactions. In this Viewpoint, we discuss the use of ILs as catalysts and mediators in advanced recycling, with an emphasis on chemical recycling, by examining the interplay between IL chemistry and deconstruction thermodynamics, deconstruction kinetics, IL recovery, and product recovery. We also consider several potential environmental benefits and concerns associated with employing ILs for advanced recycling over bulk- or solvent-mediated deconstruction techniques, such as reduced chemical escape by volatilization, decreased energy demands, toxicity, and environmental persistence. By analyzing IL-mediated polymer deconstruction across a breadth of macromolecular systems, we identify recent innovations, current challenges, and future opportunities in IL application toward circular polymer economies.

Circularity in polymers: addressing performance and sustainability challenges using dynamic covalent chemistries.

The circularity of current and future polymeric materials is a major focus of fundamental and applied research, as undesirable end-of-life outcomes and waste accumulation are global problems that impact our society. The recycling or repurposing of thermoplastics and thermosets is an attractive solution to these issues, yet both options are encumbered by poor property retention upon reuse, along with heterogeneities in common waste streams that limit property optimization. Dynamic covalent chemistry, when applied to polymeric materials, enables the targeted design of reversible bonds that can be tailored to specific reprocessing conditions to help address conventional recycling challenges. In this review, we highlight the key features of several dynamic covalent chemistries that can promote closed-loop recyclability and we discuss recent synthetic progress towards incorporating these chemistries into new polymers and existing commodity plastics. Next, we outline how dynamic covalent bonds and polymer network structure influence thermomechanical properties related to application and recyclability, with a focus on predictive physical models that describe network rearrangement. Finally, we examine the potential economic and environmental impacts of dynamic covalent polymeric materials in closed-loop processing using elements derived from techno-economic analysis and life-cycle assessment, including minimum selling prices and greenhouse gas emissions. Throughout each section, we discuss interdisciplinary obstacles that hinder the widespread adoption of dynamic polymers and present opportunities and new directions toward the realization of circularity in polymeric materials.

Reduced genotoxicity of lignin-derivable replacements to bisphenol A studied using in silico, in vitro, and in vivo methods.

Bisguaiacols, lignin-derivable bisphenols, are considered promising and possibly safer alternatives to bisphenol A (BPA), but comprehensive toxicity investigations are needed to ensure safety. Most toxicity studies of BPA and its analogues have focused on potential estrogenic activity, and only limited toxicological data are available on other toxicity aspects, such as genotoxicity at low exposure levels. In this study, the genotoxicity of six lignin-derivable bisguaiacols with varying regioisomer contents and degrees of methoxy substitution was investigated using a multi-tiered method, consisting of in silico simulations, in vitro Ames tests, and in vivo comet tests. The toxicity estimation software tool, an application that predicts toxicity of chemicals using quantitative structure-activity relationships, calculated that the majority of the lignin-derivable bisguaiacols were non-mutagenic. These results were supported by Ames tests using five tester strains (TA98, TA100, TA102, TA1535, and TA1537) at concentrations ranging from 0.5 pmol/plate to 5 nmol/plate. The potential genotoxicity of bisguaiacols was further evaluated using in vivo comet testing in fetal chicken livers, and in addition to the standard alkaline comet assay, the formamidopyrimidine DNA glycosylase enzyme-modified comet assay was employed to investigate oxidative DNA damage in the liver samples. The oxidative stress analyses indicated that the majority of lignin-derivable analogues showed no signs of mutagenicity (mutagenic index < 1.5) or genotoxicity, in comparison to BPA and bisphenol F, likely due to the methoxy groups on the lignin-derivable aromatics. These findings reinforce the potential of lignin-derivable bisphenols as safer alternatives to BPA.

Engineering Innovations, Challenges, and Opportunities for Lignocellulosic Biorefineries: Leveraging Biobased Polymer Production.

Alternative polymer feedstocks are highly desirable to address environmental, social, and security concerns associated with petrochemical-based materials. Lignocellulosic biomass (LCB) has emerged as one critical feedstock in this regard because it is an abundant and ubiquitous renewable resource. LCB can be deconstructed to generate valuable fuels, chemicals, and small molecules/oligomers that are amenable to modification and polymerization. However, the diversity of LCB complicates the evaluation of biorefinery concepts in areas including process scale-up, production outputs, plant economics, and life-cycle management. We discuss aspects of current LCB biorefinery research with a focus on the major process stages, including feedstock selection, fractionation/deconstruction, and characterization, along with product purification, functionalization, and polymerization to manufacture valuable macromolecular materials. We highlight opportunities to valorize underutilized and complex feedstocks, leverage advanced characterization techniques to predict and manage biorefinery outputs, and increase the fraction of biomass converted into valuable products.

A simple approach to characterizing block copolymer assemblies: graphene oxide supports for high contrast multi-technique imaging.

Block copolymers are well-known to self-assemble into a range of 3-dimensional morphologies. However, due to their nanoscale dimensions, resolving their exact structure can be a challenge. Transmission electron microscopy (TEM) is a powerful technique for achieving this, but for polymeric assemblies chemical fixing/staining techniques are usually required to increase image contrast and protect specimens from electron beam damage. Graphene oxide (GO) is a robust, water-dispersable, and nearly electron transparent membrane: an ideal support for TEM. We show that when using GO supports no stains are required to acquire high contrast TEM images and that the specimens remain stable under the electron beam for long periods, allowing sample analysis by a range of electron microscopy techniques. GO supports are also used for further characterization of assemblies by atomic force microscopy. The simplicity of sample preparation and analysis, as well as the potential for significantly increased contrast background, make GO supports an attractive alternative for the analysis of block copolymer assemblies.