Ferula latisecta gels for synthesis of zinc/silver binary nanoparticles: antibacterial effects against gram-negative and gram-positive bacteria and physicochemical characteristics.

This study explores the potential antibacterial applications of zinc oxide nanoparticles (ZnO NPs) enhanced with silver (Ag) using plant gel (ZnO-AgO NPs). The problem addressed is the increasing prevalence of pathogenic bacteria and the need for new, effective antimicrobial agents. ZnO NPs possess distinctive physicochemical properties that enable them to selectively target bacterial cells. Their small size and high surface area-to-volume ratio allow efficient cellular uptake and interaction with bacterial cells. In this study, the average size of the synthesized ZnO-Ag nanoparticles was 77.1 nm, with a significant standard deviation of 33.7 nm, indicating a wide size distribution. The nanoparticles demonstrated remarkable antibacterial efficacy against gram-negative and gram-positive bacteria, with inhibition zones of 14.33 mm for E. coli and 15.66 mm for B. subtilis at a concentration of 300 µg/ml. Minimum inhibitory concentrations (MIC) were determined to be 100 µg/ml for E. coli and 75 µg/ml for S. saprophyticus. Additionally, ZnO-Ag NPs exhibited excellent biocompatibility, making them appropriate for various pharmacological uses. This study utilizes Ferula latisecta gels, offering a sustainable and eco-friendly approach to nanoparticle synthesis. Incorporating of Ag into ZnO NPs significantly enhances their antimicrobial properties, with the combined results showing great inhibition effects on pathogenic microbes. The findings suggest that ZnO-Ag NPs could be a promising candidate for addressing the challenges posed by drug-resistant bacterial infections and enhancing antimicrobial treatments.

Immunogenicity and safety of RAZI recombinant spike protein vaccine (RCP) as a booster dose after priming with BBIBP-CorV: a parallel two groups, randomized, double blind trial.

BACKGROUND: The immunity induced by primary vaccination is effective against COVID-19; however, booster vaccines are needed to maintain vaccine-induced immunity and improve protection against emerging variants. Heterologous boosting is believed to result in more robust immune responses. This study investigated the safety and immunogenicity of the Razi Cov Pars vaccine (RCP) as a heterologous booster dose in people primed with Beijing Bio-Institute of Biological Products Coronavirus Vaccine (BBIBP-CorV). METHODS: We conducted a randomized, double-blind, active-controlled trial in adults aged 18 and over primarily vaccinated with BBIBP-CorV, an inactivated SARS-CoV-2 vaccine. Eligible participants were randomly assigned (1:1) to receive a booster dose of RCP or BBIBP-CorV vaccines. The primary outcome was neutralizing antibody activity measured by a conventional virus neutralization test (cVNT). The secondary efficacy outcomes included specific IgG antibodies against SARS-CoV-2 spike (S1 and receptor-binding domain, RBD) antigens and cell-mediated immunity. We measured humoral antibody responses at 2 weeks (in all participants) and 3 and 6 months (a subgroup of 101 participants) after the booster dose injection. The secondary safety outcomes were solicited and unsolicited immediate, local, and systemic adverse reactions. RESULTS: We recruited 483 eligible participants between December 7, 2021, and January 13, 2022. The mean age was 51.9 years, and 68.1% were men. Neutralizing antibody titers increased about 3 (geometric mean fold increase, GMFI = 2.77, 95% CI 2.26-3.39) and 21 (GMFI = 21.51, 95% CI 16.35-28.32) times compared to the baseline in the BBIBP-CorV and the RCP vaccine groups. Geometric mean ratios (GMR) and 95% CI for serum neutralizing antibody titers for RCP compared with BBIBP-CorV on days 14, 90, and 180 were 6.81 (5.32-8.72), 1.77 (1.15-2.72), and 2.37 (1.62-3.47) respectively. We observed a similar pattern for specific antibody responses against S1 and RBD. We detected a rise in gamma interferon (IFN-γ), tumor necrosis factor (TNF-α), and interleukin 2 (IL-2) following stimulation with S antigen, particularly in the RCP group, and the flow cytometry examination showed an increase in the percentage of CD3 + /CD8 + lymphocytes. RCP and BBIBP-CorV had similar safety profiles; we identified no vaccine-related or unrelated deaths. CONCLUSIONS: BBIBP-CorV and RCP vaccines as booster doses are safe and provide a strong immune response that is more robust when the RCP vaccine is used. Heterologous vaccines are preferred as booster doses. TRIAL REGISTRATION: This study was registered with the Iranian Registry of Clinical Trial at www.irct.ir , IRCT20201214049709N4. Registered 29 November 2021.

Antimicrobial and antibiofilm properties of selenium-chitosan-loaded salicylic acid nanoparticles for the removal of emerging contaminants from bacterial pathogens.

In this study salicylic acid loaded containing selenium nanoparticles was synthesized and called SA@CS-Se NPs. the chitosan was used as a natural stabilizer during the synthesis process. Fourier transforms infrared spectroscopy (FTIR), Powder X-ray diffraction (XRD), field emission electron microscopy (FESEM), and transmission electron microscopy (TEM) were used to describe the physicochemical characteristics of the SA@CS-Se NPs. The PXRD examination revealed that the grain size was around 31.9 nm. TEM and FESEM techniques showed the spherical shape of SA@CS-Se NPs. Additionally, the analysis of experiments showed that SA@CS-Se NPs have antibacterial properties against 4 ATCC bacteria; So that with concentrations of 75, 125, 150, and 100 µg/ml, it inhibited the biofilm formation of Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, and Staphylococcus aureus respectively. Also, at the concentration of 300 µg/ml, it removed 22.76, 23.2, 10.62, and 18.08% biofilm caused by E. coli, P. aeruginosa, B. subtilis, and S. aureus respectively. The synthesized SA@CS-Se NPs may find an application to reduce the unsafe influence of pathogenic microbes and, hence, eliminate microbial contamination.

The folate-linked chitosan-coated Kaempferol/HSA nano-transporters (FCKH-NTs) as the selective apoptotic inducer in human MCF-7 breast cancer cell line.

BACKGROUND: Kaempferol, the natural bioactive flavonoid, has been utilized as an efficient anti-breast cancer compound. In the current study, the Kaempferol's cellular uptake and its aqueous solubility were improved by using human serum albumin (HSA) as the Kaempferol adjuvant and encapsulating it with the folate-linked chitosan polymer to evaluate the apoptotic, activity of the novel-formulated Kaempferol in human MCF-7 breast cancer cells. METHODS: The folate-linked chitosan-coated Kaempferol/HSA nano-transporters (FCKH-NTs) were synthesized and characterized using FTIR, FESEM, DLS, and Zeta potential analysis. The nano-transporters' selective cytotoxicity was studied by applying an MTT assay on the cancerous MCF-7 cells compared with normal HFF cell lines. Cell death type determination was determined by analyzing the expression of apoptotic (BAX and Cas-8) and anti-apoptotic genes (BCL2 and NF-κB). The FCKH-NTs apoptotic activity was verified by studying the flow cytometry and AO/PI staining results. RESULT: The 126-nm FCKH-NTs (PDI = 0.282) selectively induced apoptotic death in human MCF-7 breast cancer cells by up-regulating the BAX, Nf- κB, and Cas-8 gene expression. The apoptotic activity of FCKH-NTs was verified by detecting the SubG1-arrested cancer cells and increased apoptotic bodies in AO/PI staining images. CONCLUSION: The FCKH-NTs exhibited a selective-cytotoxic impact on human MCF-7 breast cancer cells compared with normal HFF cells, which can be due to the folate receptor-mediated endocytosis mechanism of the nano-transporters. Therefore, the FCKH-NTs have the potential to be used as a selective anti-breast cancer compound.

The Brassica Napus Extract (BNE)-Loaded PLGA Nanoparticles as an Early Necroptosis and Late Apoptosis Inducer in Human MCF-7 Breast Cancer Cells.

Loading of the Brassica napus extract (BNE) on PLGA nanoparticle (BNE-PNP) and study its necroptotic activity in human MCF7-breast cancer cells. Double emulsion solvent evaporation methods were used for synthesis of BNE-PNP and DLS, SEM, and surface Zeta-potential analysis were applied for defining the physicochemical properties of BNE-PNP. The cytotoxic impact of BNE-PNP nanoparticles was analyzed by MTT assay and expression of apoptotic (P53 and Cas-3) and necrotic (TNF-α) gene markers were measured by qPCR to evaluate the BNE-PNP-induced cell death type. The stable (-36.07 mV) BNE-PNP were synthesized at 71.07 nm dimension. They significantly decrease the count of metabolically active MCF7 cells (IC50: 170.94 µg/ml after 48 h). The BNE-PNP induced an early programmed necrotic (necroptosis) and late apoptotic death on the MCF7 cancer cells by up-regulating all the P53/TNF-α and Cas-3 gene expression, respectively. The BNE-PNP dose-dependently induced an early cell-selective necroptotic death. Since the necroptotic death is known as a biocompatible cellular death induction, the BNE-PNP have the potential to be used as a safe efficient anticancer compound.

Comparative Study on the Biological Effects of Sodium Citrate-Based and Apigenin-Based Synthesized Silver Nanoparticles.

The apigenin is a bioactive flavonoid mostly found in fruits and vegetables that possess various biological activities. The current study was performed to compare the biological potentials of sodium citrate-based (SC-SNPs) and apigenin-based (AP-SNPs) synthesized silver nanoparticles under the in vitro and in vivo conditions. The synthesized silver nanoparticles were physically and chemically characterized. The anticancer, pro-apoptotic, and their anti-bacterial activities were determined. Further, the mice trial was conducted to determine the possible toxic effects of the synthesized silver nanoparticles. The result of particle size analysis revealed the nanometer sizes of the SC-SNPs and AP-SNPs were about 95.5 and 93.94 nm, respectively. Both nanoparticles indicated pseudo-spherical shape, homogenous dispersion with an appropriate good degree of stability. However, the anticancer potential, pro-apoptotic effects and antibacterial activity of AP-SNPs were higher than that of SC-SNPs. Moreover, the mice trial indicated that AP-SNPs improved the liver function through modulation of liver enzymes, lipid peroxidation, and increase in the expression of antioxidant enzymes (SOD and GPx) as compared to the mice received AP-SNPs during 30 day experiment. Consequently the synthesis of silver nanoparticles using apigenin as reducing bioactive compound may result in production of silver nanoparticles with enhanced anticancer, antibacterial and antioxidant activities.

The Clinical Value of Serum Adropin Level in Early Detection of Diabetic Nephropathy.

BACKGROUND/AIMS: Adropin is a metabolic hormone secreted by the liver, brain, and many peripheral tissues and is involved in energy homeostasis and insulin sensitivity. Some reports have indicated a significant decrease in serum adropin levels in type 2 diabetic patients. However, the significance of a decline in adropin level in early detection of diabetic nephropathy (DN) remains to be clarified. The purpose of this study was to evaluate the serum levels of adropin in patients with type 2 diabetes with and without nephropathy. METHODS: A total of 135 unrelated subjects (including 45 diabetic patients with nephropathy, 45 without nephropathy, and 45 healthy controls) were enrolled in this study. Fasting venous blood samples were collected from all patients. Serum adropin levels of all cases were analyzed by an enzyme-linked immunosorbent assay method. The correlations of serum adropin levels with anthropometric and biochemistry variables were determined. Logistic regression was performed to assess the association of adropin with odds of nephropathy. A receiver operating characteristic (ROC) curve was obtained to explore the optimum serum adropin concentration in distinguishing diabetic patients with and without nephropathy. RESULTS: Diabetic patients with nephropathy showed lower serum adropin levels than those in patients without nephropathy and healthy controls (p < 0.001). Pearson correlation analysis indicated that serum adropin was negatively correlated with BMI, FBS, HbA1c, blood urea, creatinine, LDL, and ACR and positively correlated with HDL and albumin. Logistic regression analysis showed that serum adropin was correlated with decreased risk of developing diabetic nephropathy. Moreover, in ROC analysis, at cutoff value 3.20 (mg/dL) with an AUC = 0.830, adropin had 80% sensitivity and 60% specificity for distinguishing the diabetic nephropathy. CONCLUSIONS: This study demonstrates that decreased level of adropin is associated with renal dysfunction in patients with type 2 diabetes mellitus. Serum adropin concentrations may be used as a biomarker for early detection of diabetic nephropathy.

Magnetic dispersive solid-phase extraction based on graphene oxide/Fe3 O4 @polythionine nanocomposite followed by atomic absorption spectrometry for zinc monitoring in water, flour, celery and egg.

BACKGROUND: Magnetic graphene oxide nanocomposite has been proposed as a promising and sustainable sorbent for the extraction and separation of target analytes from food matrices. Sample preparation based on nanocomposite presents several advantages, such as desired efficiency, reasonable selectivity and high surface-area-to-volume ratio. RESULTS: A new graphene oxide/Fe3 O4 @polythionine (GO/Fe3 O4 @PTh) nanocomposite sorbent was introduced for magnetic dispersive solid-phase extraction and flame atomic absorption spectrometric detection of zinc(II) in water, flour, celery and egg. To fabricate the sorbent, an oxidative polymerization of thionine on the surface of magnetic GO was applied, while polythionine was simply employed as a surface modifier to improve extraction yield. The properties of the sorbent were characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray analysis, vibrating sample magnetometry and Fourier transform-infrared spectroscopy. The calibration curve showed linearity in the range of 0.5-30 ng mL-1 . Limits of detection (S/N = 3) and quantification (S/N = 10) were 0.08 and 0.5 ng mL-1 , respectively. CONCLUSION: The method was applied for trace-level determination of Zn(II) in water and food samples, and its validation was investigated by recovery experiments and analyzing certified reference material. © 2018 Society of Chemical Industry.

Sol-gel-based SPME fiber as a reliable sampling technique for studying biogenic volatile organic compounds released from Clostridium tetani.

A novel and efficient headspace solid-phase microextraction (HS-SPME) method, followed by gas chromatography mass spectrometry (GC-MS), was developed to study volatile organic compounds (VOCs) emerging from microorganisms. Two homemade SPME fibers, a semi-polar poly (dimethylsiloxane) (PDMS) fiber, and a polar polyethylene glycol (PEG) fiber, along with two commercial fibers (PDMS and PDMS/DVB) were used to collect VOCs emerging from Clostridium tetani which was cultured in different media. The adsorbed VOCs were desorbed and identified, in vitro, using GC-MS. The adsorption efficiency was improved by optimizing the time duration of adsorption and desorption. About 50 components were identified by the proposed method. The main detected compounds appeared to be sulfur containing compounds such as butanethioic acid S-methyl ester, dimethyl trisulfide, and dimethyl tetrasulfide. These volatile sulfur containing compounds are derived from amino acids containing the sulfur element, which probably coexist in the mentioned bacterium or are added to the culture media. The developed HS-SPME-GC-MS method allowed the determination of the chemical fingerprint of Clostridium tetani volatile constituents, and thus provides a new, simple, and reliable tool for studying the growth of microorganisms. Graphical abstract Investigation of biogenic VOCs released from Clostridium tetani using SPME-GC-MS.

Microwave-assisted extraction and high-throughput monolithic-polymer-based micro-solid-phase extraction of organophosphorus, triazole, and organochlorine residues in apple.

A high-throughput micro-solid-phase extraction device based on a 96-well plate was constructed and applied to the determination of pesticide residues in various apple samples. Butyl methacrylate and ethylene glycol dimethacrylate were copolymerized as a monolithic polymer and placed in the cylindrically shaped stainless-steel meshes of 96-micro-solid-phase extraction device and used as an extracting unit. Before the micro-solid-phase extraction, microwave-assisted extraction was employed to facilitate the transfer of the pesticide residues from the apple matrix to liquid media. Then, 1 mL of the aquatic samples was transferred into the 96-well plate and the 96-micro-solid-phase extraction device was applied for the extraction of the selected pesticides. Influential parameters, such as sorbent-to-sorbent reproducibility, microwave-assisted extraction time, ionic strength and micro-solid-phase extraction time, were optimized. The limits of quantitation were below 120 µg/kg, which are lower than the maximum residue limits. The developed method was successfully implemented for the extraction and determination of the selected pesticides from 20 different apple samples gathered from local markets. Phosalone was identified and quantified at the concentration level of 147 (±16.4) µg/kg in one of the samples.