Chemosensitization of tumors via simultaneous delivery of STAT3 inhibitor and doxorubicin through HPMA copolymer-based nanotherapeutics with pH-sensitive activation.

We synthesized three novel STAT3 inhibitors (S3iD1-S3iD3) possessing oxoheptanoic residue enabling linkage to HPMA copolymer carrier via a pH-sensitive hydrazone bond. HPMA copolymer conjugates bearing doxorubicin (Dox) and our STAT3 inhibitors were synthesized to evaluate the anticancer effect of Dox and STAT3 inhibitor co-delivery into tumors. S3iD1-3 and their copolymer-bound counterparts (P-S3iD1-P-S3iD3) showed considerable in vitro cytostatic activities in five mouse and human cancer cell lines with IC50 ~0.6-7.9 µM and 0.7-10.9 µM, respectively. S3iD2 and S3iD3 were confirmed to inhibit the STAT3 signaling pathway. The combination of HPMA copolymer-bound Dox (P-Dox) and P-S3iD3 at the dosage showing negligible toxicity demonstrated significant antitumor activity in B16F10 melanoma-bearing mice and completely cured 2 out of 15 mice. P-Dox alone had a significantly lower therapeutic activity with no completely cured mice. Thus, polymer conjugates bearing STAT3 inhibitors may be used for the chemosensitization of chemorefractory tumors.

Biocompatible glyconanomaterials based on HPMA-copolymer for specific targeting of galectin-3.

BACKGROUND: Galectin-3 (Gal-3) is a promising target in cancer therapy with a high therapeutic potential due to its abundant localization within the tumor tissue and its involvement in tumor development and proliferation. Potential clinical application of Gal-3-targeted inhibitors is often complicated by their insufficient selectivity or low biocompatibility. Nanomaterials based on N-(2-hydroxypropyl)methacrylamide (HPMA) nanocarrier are attractive for in vivo application due to their good water solubility and lack of toxicity and immunogenicity. Their conjugation with tailored carbohydrate ligands can yield specific glyconanomaterials applicable for targeting biomedicinally relevant lectins like Gal-3. RESULTS: In the present study we describe the synthesis and the structure-affinity relationship study of novel Gal-3-targeted glyconanomaterials, based on hydrophilic HPMA nanocarriers. HPMA nanocarriers decorated with varying amounts of Gal-3 specific epitope GalNAcß1,4GlcNAc (LacdiNAc) were analyzed in a competitive ELISA-type assay and their binding kinetics was described by surface plasmon resonance. We showed the impact of various linker types and epitope distribution on the binding affinity to Gal-3. The synthesis of specific functionalized LacdiNAc epitopes was accomplished under the catalysis by mutant ß-N-acetylhexosaminidases. The glycans were conjugated to statistic HPMA copolymer precursors through diverse linkers in a defined pattern and density using Cu(I)-catalyzed azide-alkyne cycloaddition. The resulting water-soluble and structurally flexible synthetic glyconanomaterials exhibited affinity to Gal-3 in low µM range. CONCLUSIONS: The results of this study reveal the relation between the linker structure, glycan distribution and the affinity of the glycopolymer nanomaterial to Gal-3. They pave the way to specific biomedicinal glyconanomaterials that target Gal-3 as a therapeutic goal in cancerogenesis and other disorders.

Adaptable polymerization platform for therapeutics with tunable biodegradability.

Biodegradable polymer-based therapeutics have recently become essential drug delivery biomaterials for various bioactive compounds. Biodegradable and biocompatible polymer-based biomaterials fulfill the requirements of these therapeutics because they enable to obtain polymer biomaterials with optimized blood circulation, pharmacokinetics, biodegradability, and renal excretion. Herein, we describe an adaptable polymerization platform employed for the synthesis of long-circulating, stimulus-sensitive and biodegradable biomaterials, therapeutics, or theranostics. Four chain transfer agents (CTA) were designed and successfully synthesized for the reversible addition-fragmentation chain transfer polymerization, allowing the straightforward synthesis of hydrolytically biodegradable structures of block copolymers-based biomaterials. The controlled polymerization using the CTAs enables controlling the half-life of the hydrolytic degradation of polymer precursors in a wide range from 5 h to 21 days. Moreover, the antitumor drug pirarubicin (THP) was successfully conjugated to the polymer biomaterials via a pH-sensitive hydrazone bond for in vitro and in vivo experiments. Polymer conjugates demonstrated superior antitumor efficacy compared to basic linear polymer-based conjugates. Notably, the biodegradable systems, even though those with degradation in the order of hours were selected, increased the half-life of THP in the bloodstream almost two-fold. Indeed, the presented platform design enables the main chain-end specific attachment of targeting ligands or diagnostic molecules. The adaptable polymerization platform design allows tuning of the biodegradability rate, stimuli-sensitive drug bonding, and optimized pharmacokinetics to increase the therapy outcome and system targeting, thus allowing the preparation of targeted or theranostic polymer conjugates. STATEMENT OF SIGNIFICANCE: Biodegradable and biocompatible polymer-based biomaterials are recognized as potential future bioactive nanomedicines. To advance the development of such biomaterials, we developed polymerization platforms utilizing tailored chain transfer agents allowing the straightforward synthesis of hydrolytically degradable polymer biomaterials with tuned biodegradability from hours to several days. The platform allows for the synthesis of long-circulating, stimulus-sensitive and biodegradable biomaterial serving as drug carriers or theranostics. The therapeutic potential was validated by preparation of polymer biomaterials containing pirarubicin, anticancer drug, bound via pH sensitive bond and by showing prolonged blood circulation and increased antitumor activity while keeping the drug side effects low. This work paves the way for future development of biodegradable polymer biomaterials with advanced properties in drug delivery.

Size-switchable polymer-based nanomedicines in the advanced therapy of rheumatoid arthritis.

Chronic inflammatory diseases such as rheumatoid arthritis represent a substantial socio-economic impact and have a high prevalence in the modern world. Nano-sized polymer therapeutics have shown suitable characteristics for becoming the next generation of anti-inflammatory nanomedicines. Here, we present biocompatible and stimuli-sensitive N-(2-hydroxypropyl)methacrylamide based polymer conjugates with the anti-inflammatory drug dexamethasone (DEX), which has been tailored for prolonged blood circulation, enhanced inflammatory site accumulation, site-specific drug release and subsequent elimination of the carrier via urine excretion. The hydrodynamic size of novel polymer-DEX nanomedicine was adjusted to prolong its blood circulation whilst maintaining the renal excretability of the polymer carrier after drug release in inflamed tissue. The therapeutic efficacy of the studied polymer nanomedicines was evaluated in a model of dissipated chronic arthritis, i.e. collagen II-induced arthritis, in mice. The pH-sensitive drug attachment enabled enhanced blood circulation with minimal systemic drug release, as well as rapid drug activation in affected joints. Importantly, unlike free DEX, the polymer nanomedicines were able to diminish joint inflammation and arthritis-induced bone damage - even at a reduced dosing regimen - as evaluated by micro computed tomography (micro-CT).

Synergistic action of doxorubicin bound to the polymeric carrier based on N-(2-hydroxypropyl)methacrylamide copolymers through an amide or hydrazone bond.

The cytostatic effects of polymeric conjugates based on N-(2-hydroxypropyl)methacrylamide copolymers (PHPMA) and containing doxorubicin bound through amide and hydrazone bonds (mixed conjugates) were compared with the cytostatic effects of monoconjugates containing drug bound through an amide or hydrazone bond. One group of mixed conjugates was formed from two comonomers containing doxorubicin bound to the methacryloyl group through a spacer and an amide (DOX(AM)) or hydrazone (DOX(HYD)) bond via copolymerization with HPMA. A second group of mixed conjugates was formed from two different interconnected HPMA copolymers, one containing DOX(AM) and the other DOX(HYD), forming a high-molecular-weight branched structure. The third mixed polymeric system was a simple mixture of monoconjugates DOX(AM)-PHPMA and DOX(HYD)-PHPMA. Simultaneous treatment with all mixed forms of the polymeric derivatives of doxorubicin significantly increased antitumor efficacy after application of monoconjugates, suggesting a synergizing effect that could be used in designing new doxorubicin-containing therapeutic systems.

Polymeric nanogels as drug delivery systems.

The present review focuses on the description of the design, synthesis and physico-chemical and biological evaluation of polymer nanogels. Nanogels are robust swollen cross-linked polymer nanoparticles that can be used as highly efficient and biodegradable carriers for the transport of drugs in controlled drug delivery. In this article, various types of nanogels are described and methods for their preparation discussed. The possibility of using synthesized nanosystems for targeting are reviewed to show the potential of tailored structures to reach either solid tumor tissue or direct tumor cells. Finally, the methods for encapsulation or attachment of biologically active molecules, e.g. drugs, proteins, are described and compared.

Synthesis of water-soluble star polymers based on cyclodextrins.

Novel star polymers based on the water-soluble N-(2-hydroxypropyl)methacrylamide (HPMA) copolymer and cyclodextrin were synthesized and the physico-chemical behavior of these precursors was studied. Semitelechelic HPMA copolymers were grafted onto the cyclodextrin core, thus forming star-like structure. Both prepared systems were designed as possible polymer carriers for the controlled release of cytostatic drugs, which after the drug release and degradation will be eliminated from the organism. Two synthesis approaches were used to obtain similar polymer carriers with different degradation rates. All the polymers were prepared by reversible addition-fragmentation chain-transfer polymerization, which guarantees low dispersity of the prepared systems.

Polymer-drug conjugates in inflammation treatment.

Inflammation is a vital defense mechanism of living organisms. However, persistent and chronic inflammation may lead to severe pathological processes and evolve into various chronic inflammatory diseases (CID), e.g. rheumatoid arthritis, multiple sclerosis, multiple sclerosis, systemic lupus erythematosus or inflammatory bowel diseases, or certain types of cancer. Their current treatment usually does not lead to complete remission. The application of nanotherapeutics may significantly improve CID treatment, since their accumulation in inflamed tissues has been described and is referred to as extravasation through leaky vasculature and subsequent inflammatory cell-mediated sequestration (ELVIS). Among nanotherapeutics, water-soluble polymer-drug conjugates may be highly advantageous in CID treatment due to the possibility of their passive and active targeting to the inflammation site and controlled release of active agents once there. The polymer-drug conjugate consists of a hydrophilic biocompatible polymer backbone along which the drug molecules are covalently attached via a biodegradable linker that enables controlled drug release. Their active targeting or bio-imaging can be achieved by introducing the cell-specific targeting moiety or imaging agents into the polymer conjugate. Here, we review the relationship between polymer conjugates and inflammation, including the benefits of the application of polymer conjugates in inflammation treatment, the anti-inflammatory activity of polymer drug conjugates and potential polymer-promoted inflammation and immunogenicity.

Drug carriers with star polymer structures.

In this review we summarize several synthetic approaches to the advanced synthesis of star-like polymer-based drug carriers. Moreover, their application as nanomedicines for therapy or the diagnosis of neoplastic diseases and their biodistribution are reviewed in detail. From a broad spectrum of star-like systems, we focus only on fully water-soluble systems, mainly based on poly(ethylene glycol) or N-(2-hydroxypropyl)methacrylamide polymer and copolymer arms and polyamidoamine dendrimers serving as the core of the star-like systems.

Cell-penetrating peptides: a useful tool for the delivery of various cargoes into cells.

Cell-penetrating compounds are substances that enhance the cellular uptake of various molecular cargoes that do not easily cross the cellular membrane. The majority of cell-penetrating compounds described in the literature are cell-penetrating peptides (CPPs). This review summarizes the various structural types of cell-penetrating compounds, with the main focus on CPPs. The authors present a brief overview of the history of CPPs, discuss the various types of conjugation of CPPs to biologically active cargoes intended for cell internalization, examine the cell-entry mechanisms of CPPs, and report on the applications of CPPs in research and in preclinical and clinical studies.

Polymer nitric oxide donors potentiate the treatment of experimental solid tumours by increasing drug accumulation in the tumour tissue.

The delivery of nitric oxide (NO) specifically to solid tumours was explored in this study as a strategy to augment the passive accumulation of nanomedicines in tumours induced by the Enhanced Permeability and Retention (EPR) effect. An increase in accumulation was achieved by the binding of the chemical precursor of NO, based on an organic nitrate, to a water-soluble synthetic polymer drug carrier. Four structurally different N-(2-hydroxypropyl)methacrylamide (HPMA)-based polymer NO donors were synthesized. Depending on their chemical structure, two of these donors were hydrolytically stable, while two rapidly released the parent nitrate under acidic conditions, mimicking the intracellular environment. The polymer NO donors were shown to overcome the drawbacks related to low-molecular-weight NO releasing compounds, namely systemic toxicity, lack of site specificity, and fast blood clearance. The NO donors showed intracellular NO release upon incubation with tumour cells. In vivo, they potentiated the EPR effect, resulting in an increased accumulation of polymer-bound cytotoxic drug doxorubicin (Dox) in EL4 T-cell lymphoma inoculated in mice. This led to a better therapeutic outcome in the treatment of lymphoma with the high-molecular-weight polymer conjugates carrying Dox but not in the treatment with the free Dox. The localized augmentation of the EPR effect via the tumour-specific NO delivery system can be viewed as a promising strategy to potentiate polymer-based tumour therapy without increasing systemic toxicity.

Overcoming multidrug resistance using folate receptor-targeted and pH-responsive polymeric nanogels containing covalently entrapped doxorubicin.

Multidrug resistance (MDR) contributes to failure of chemotherapy. We here show that biodegradable polymeric nanogels are able to overcome MDR via folic acid targeting. The nanogels are based on hydroxyethyl methacrylamide-oligoglycolates-derivatized poly(hydroxyethyl methacrylamide-co-N-(2-azidoethyl)methacrylamide) (p(HEMAm-co-AzEMAm)-Gly-HEMAm), covalently loaded with the chemotherapeutic drug doxorubicin (DOX) and subsequently decorated with a folic acid-PEG conjugate via copper-free click chemistry. pH-Responsive drug release is achieved via the acid-labile hydrazone bond between DOX and the methacrylamide polymeric network. Cellular uptake and cytotoxicity analyses in folate receptor-positive B16F10 melanoma versus folate receptor-negative A549 lung carcinoma cells confirmed specific uptake of the targeted nanogels. Confocal microscopy demonstrated efficient internalization, lysosomal trafficking, drug release and nuclear localization of DOX. We also show that DOX resistance in 4T1 breast cancer cells results in upregulation of the folate receptor, and that folic acid targeted nanogels can be employed to bypass drug efflux pumps, resulting in highly efficient killing of resistant cancer cells. In conclusion, folic acid functionalized nanogels with pH-controlled drug release seem to hold significant potential for treating multidrug resistant malignancies.

High-molecular-weight HPMA-based polymer drug carriers for delivery to tumor.

In this work, design and synthesis of high-molecular-weight N-(2-hydroxypropyl)methacrylamide-based polymer drug delivery systems tailored for cancer therapy is summarized. Moreover, the influence of their architecture on tumor accumulation and in vivo anti-cancer efficacy is discussed. Mainly, the high-molecular-weight delivery systems, such as branched, grafted, multi-block, star-like or micellar systems, with molecular weights greater than the renal threshold are discussed and reviewed in detail.

The pH-dependent and enzymatic release of cytarabine from hydrophilic polymer conjugates.

Cytarabine is one of the most efficient drugs in the treatment of hematological malignancies. In this work, we describe the synthesis and characterization of two different polymer conjugates of cytarabine that were designed for the controlled release of cytarabine within the leukemia cells. Reactive copolymers of N-(2-hydroxypropyl)methacrylamide (HPMA) and 3-(3-methacrylamidopropa-noyl)thiazolidine-2-thione) or 3-(Nmethacryloylglycyl-phenylalanylleucylglycyl)thiazolidine-2-thione were used in the study as reactive polymer precursors for reaction with cytarabine. The enzymatic release of cytarabine from the conjugate containing a GFLG spacer utilizing cathepsin B was verified. In addition to enzymolysis, the pH-dependent hydrolysis of cytarabine from both copolymers was also confirmed. Approximately 40 % and 20 % of the drug was released by spontaneous hydrolysis at pH 7.4 within 72 h from the polymer conjugates with the GFLG and beta-Ala spacers, respectively. At pH 6.0, the spontaneous hydrolysis slowed down, and less than 10 % of the drug was liberated within 72 h. The results of the cytotoxicity evaluation of the polymer conjugates in vitro against various cell lines showed that the cytotoxicity of the polymer conjugates is approximately three times lower in comparison to free cytarabine.

HPMA copolymer-based polymer conjugates for the delivery and controlled release of retinoids.

In this paper, we describe the synthesis, physicochemical characterization, drug release kinetics and preliminary biological evaluation of several N-(2-hydroxypropyl)methacrylamide (HPMA)-based polymer-retinoid conjugates designed for solid tumor immunotherapy. The conjugates are supposed to inhibit the immunosuppressive activity of myeloid-derived suppressor cells (MDSC) accumulated in the solid tumor microenvironment. All-trans retinoic acid (ATRA) was derivatized to hydrazide (AtrHy) and then attached to the polymer backbone via a spacer that is stable at the normal pH of blood (7.4) and hydrolytically degradable in mildly acidic environments (e.g. in endosomes or lysosomes, pH~5.0-6.5). Polymer-AtrHy conjugates were designed to achieve prolonged blood circulation and release of the immunomodulator intracellularly or extracellularly in solid tumor tissue. Three types of polymer precursors, differing in the structure of the keto acid-containing side chains, were synthesized. A linkage susceptible to hydrolytic cleavage was formed by the conjugation reaction of the carbonyl group-terminated side chains of the polymer precursors with the hydrazide group of a drug derivative. In vitro incubation of the conjugates in buffers resulted in much faster release of the drugs or their derivatives from the polymer at pH 5.0 than at pH 7.4, with the rate depending on the detailed structure of the spacer. Both the AtrHy derivative and its polymer conjugates showed the ability to induce the differentiation of retinoid-responsive HL-60 cells, thus demonstrating the required biological activity.

Intracellular fate of polymer therapeutics investigated by fluorescence lifetime imaging and fluorescence pattern analysis.

Nanocarriers bearing anticancer drugs are promising candidates to improve the efficacy of cancer therapy and minimize side effects. The most potent cytostatics used in the treatment of various cancers are anthracyclines, e.g. doxorubicin or pirarubicin. Recently, polymer therapeutics carrying anthracyclines have been intensively studied. The precise characterization of in vitro nanocarrier biological behavior brings a better understanding of the nanocarrier characteristics and enables prediction of the behavior of the nanocarrier during in vivo application. Advanced fluorescence detection methods, e.g. fluorescence lifetime imaging microscopy (FLIM), were successfully exploited to describe the properties of various polymeric nano-systems and contributed to a complex view of anthracyclines' intracellular transport and DNA intercalation. Here, we report the application of a specific technique for processing FLIM images, called fluorescence pattern decomposition, to evaluate early events after doxorubicin or pirarubicin treatment of cells. Moreover, we characterized changes in the intracellular localization and release of the anthracyclines during the incubation of cells with polymer nanotherapeutics based on poly[N-(2-hydroxypropyl)-methacrylamide] (pHPMA).

PCL-PEG graft copolymers with tunable amphiphilicity as efficient drug delivery systems.

The development of flexible drug delivery systems that can be tuned as a function of the drug to be delivered and of the target disease is crucial in modern medicine. For this aim, novel amphiphilic poly(ε-caprolactone)-g-poly(ethylene glycol) (PCL-g-PEG) copolymers with well-controlled design were synthesized by thiol-yne photochemistry. The grafting density and the copolymer amphiphilicity were easily controlled via the reaction parameters: concentration, reaction time, PEG length and the molar ratio between PCL and PEG or the photoinitiator in the reaction mixture. The self-assembling behavior of the copolymers was studied and a correlation between the composition of PCL-g-PEG and the nanoaggregate diameter sizes (28 to 73 nm) and critical aggregation concentrations (1.1 to 4.3 mg L-1) was found. The influence of copolymer amphiphilicity on the drug loading was evaluated with various drugs including anticancer drugs (paclitaxel, ABT-199), drugs to overcome multidrug resistance in cancer cells (curcumin, elacridar), an anti-inflammatory drug (dexamethasone) and an antibacterial drug (clofazimine). Finally, the influence of amphiphilicity on curcumin release and toxicity towards MCF-7 cancer cell lines was studied. The impact of the grafting density, PEG length and the overall EG/CL ratio is discussed in detail. Curcumin loaded PCL-g-PEG with lower EG/CL ratios and shorter PEG chains showed higher toxicity compared to their more hydrophilic counterparts.

Micelle-forming HPMA copolymer conjugates of ritonavir bound via a pH-sensitive spacer with improved cellular uptake designed for enhanced tumor accumulation.

We describe design, synthesis, physico-chemical characterization and preliminary biological evaluation of micelle-forming polymer drug conjugates with controlled drug release intended for tumor treatment. The structure of the conjugates was designed to enable tumor tissue- and cell-specific drug release and micelle disassembly to avoid side effects accompanying classic chemotherapy and guarantee safe elimination of the drug-free carrier from the organisms. The amphiphilic polymer conjugates consisted of a hydrophobic hexaleucine block and a hydrophilic block based on the N-(2-hydroxypropyl)methacrylamide (HPMA) copolymer with an antiviral and cytostatic drug, ritonavir, bound through a pH-sensitive spacer. Diblock copolymers with low dispersity (D∼ 1.1) were prepared via reversible addition-fragmentation chain transfer (RAFT) copolymerization using a hexaleucine derivative as a chain transfer agent. The associative properties of the copolymers depend on the hydrophilic polymer block length and the hydrophobic ritonavir content. The micelles dissociated under mild acidic conditions mimicking the environment inside tumor tissue/cells, because of the decrease in polymer hydrophobicity after the rapid release of the hydrophobic drug from the polymer carrier. Unexpectedly, the polymer-ritonavir conjugates internalized into HeLa cells significantly more than the polymers without ritonavir. The enhanced cell penetration and pH-triggered micelle disassembly predetermine the polymer-ritonavir conjugates to become promising tumor-targeted drug carriers.

Nanotherapeutics with anthracyclines: methods of determination and quantification of anthracyclines in biological samples.

Anthracyclines, e.g. doxorubicin, pirarubicin, are widely used as cytostatic agents in the polymer nanotherapeutics designed for the highly effective antitumor therapy with reduced side effects. However, their precise dosage scheme needs to be optimized, which requires an accurate method for their quantification on the cellular level in vitro during nanocarrier development and in body fluids and tissues during testing in vivo. Various methods detecting the anthracycline content in biological samples have already been designed. Most of them are highly demanding and they differ in exactness and reproducibility. The cellular uptake and localization is predominantly observed and determined by microscopy techniques, the anthracycline content is usually quantified by chromatographic analysis using fluorescence detection. We reviewed and compared published methods concerning the detection of anthracycline nanocarriers.

Nanotherapeutics shielded with a pH responsive polymeric layer.

Efficient intravenous delivery is the greatest single hurdle, with most nanotherapeutics frequently found to be unstable in the harsh conditions of the bloodstream. In the case of nanotherapeutics for gene delivery, viral vectors are often avidly recognized by both the innate and the adaptive immune systems. So, most modern delivery systems have benefited from being coated with hydrophilic polymers. Self-assembling delivery systems can achieve both steric and lateral stabilization following surface coating, endowing them with much improved systemic circulation properties and better access to disseminated targets; similarly, gene delivery viral vectors can be 'stealthed' and their physical properties modulated by surface coating. Polymers that start degrading under acidic conditions are increasingly investigated as a pathway to trigger the release of drugs or genes once the carrier reaches a slightly acidic tumor environment or after the carrier has been taken up by cells, resulting in the localization of the polymer in acidic endosomes and lysosomes. Advances in the design of acid-degradable drug and gene delivery systems have been focused and discussed in this article with stress placed on HPMA-based copolymers. We designed a system that is able to "throw away" the polymer coat after successful transport of the vector into a target cell. Initial biological studies were performed and it was demonstrated that this principle is applicable for real adenoviral vectors. It was shown that the transfection ability of coated virus at pH 7.4 is 75 times lower then transfection at pH 5.4.