Detection and Identification of VOCs Using Differential Ion Mobility Spectrometry (DMS).

The article presents a technique of differential ion mobility spectrometry (DMS) applicable to the detection and identification of volatile organic compounds (VOCs) from such categories as n-alkanes, alcohols, acetate esters, ketones, botulinum toxin, BTX, and fluoro- and chloro-organic compounds. A possibility of mixture identification using only the DMS spectrometer is analyzed, and several examples are published for the first time. An analysis of different compounds and their mechanisms of fragmentation, influence on effective ion temperature, and high electric field intensity is discussed.

Mechanical Testing of Epoxy Resin Modified with Eco-Additives.

The future belongs to biodegradable epoxies. In order to improve epoxy biodegradability, it is crucial to select suitable organic additives. The additives should be selected so as to (maximally) accelerate the decomposition of crosslinked epoxies under normal environmental conditions. However, naturally, such rapid decomposition should not occur within the normal (expected) service life of a product. Consequently, it is desirable that the newly modified epoxy should exhibit at least some of the mechanical properties of the original material. Epoxies can be modified with different additives (such as inorganics with different water uptake, multiwalled carbon nanotubes, and thermoplastics) that can increase their mechanical strength but does not lead to their biodegradability. In this work, we present several mixtures of epoxy resins together with organic additives based on cellulose derivatives and modified soya oil. These additives are environmentally friendly and should increase the epoxy's biodegradability on the one hand without deteriorating its mechanical properties on the other. This paper concentrates mainly on the question of the tensile strength of various mixtures. Herein, we present the results of uniaxial stretching tests for both modified and unmodified resin. Based on statistical analysis, two mixtures were selected for further studies, namely the investigation of durability properties.

Capillary Sensor for Detection of Amphetamine Precursors in Sewage Water.

This paper deals with the problem of detecting benzyl methyl ketone (BMK), which is a precursor of amphetamine that can be synthesized in home labs. The focus of our work was to identify an improvement for the analysis of sewage introduced into the municipal sewage system. The sensors used to detect BKM in these systems are often clogged and therefore cannot function properly. In this article, a new method of detecting BMK and other chemicals in wastewater is presented. A system containing capillary polypropylene, hydrophobized with polysiloxane coating fibers was prepared. These solutions were used for continuous online measurements by ion mobility spectrometry. The use of pipes with a polysiloxane coating reduces the permeation of water and significantly increases the BMK permeation due to its high solubility in the polymer.

The Influence of the Accelerated Aging Conditions on the Properties of Polyolefin Geogrids Used for Landfill Slope Reinforcement.

Polyolefin geosynthetics are susceptible to oxidative degradation, which in turn leads to diminished mechanical properties in geotechnical constructions. When using these materials, it is extremely important to determine their durability over time in particularly aggressive conditions. In order to prolong the life of a geosynthetic material, antioxidants are added during the manufacturing process. The function of antioxidants is to prevent polymer oxidation reaction in time. As the antioxidant content is depleted, the polymer becomes less protected towards oxidative attacks. This article describes the aging process of uniaxial (high density polyethylene) HDPE geogrids under the influence of chemical and environmental factors. Evaluations of accelerated aging test of the uniaxial HDPE geogrids were incubated in simulated landfill conditions for a period of 12 months. Three temperatures (25 °C, 45 °C, and 75 °C) were selected for carrying out the aging experiments in aqueous solutions mimicking landfill conditions. The changes observed by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and melt flow index (MFI) correlate with the mechanical properties of the aged geogrid. No significant changes in the FTIR and MFI were observed over the 12 months of accelerated aging tests at none of the three different temperatures. The oxidation induction time (OIT) test showed no antioxidant remaining in the geogrid following eight months of aging test at 75 °C. No significant changes in the influence of accelerated aging tests on the average relative elongation at 25 °C and 45 °C of the tested material were observed. Accelerated aging tests at 75 °C showed that the mean elongation of 12.12% for the sample not subjected to accelerated aging tests (new sample) increased to 19.32% (after 12 months of incubation).

Integrated circuits protection with the Langmuir-Blodgett Films.

Integrated circuits (ICs) can be protected from the environment with the encapsulating polymer layer. Protection properties of such a polymer barrier-layer depend strongly from the structure of thin region where polymer stays in direct contact with the IC surface. One of the interesting questions is how thick should this interphase film be to assure good environmental protection to the IC conductor lines, preventing from their corrosion and failure. In order to answer this question a set of electronic testers with Al conductor lines were modified with 1, 20, 50 multilayers of stearic acid molecules deposited in the Langmuir-Blodgett (LB) transfer method. Next, the electronic testers were subjected to the highly accelerated aging conditions (100% relative humidity (RH), 100 degrees C) for a period of up to 800 h and conductor lines resistivity changes were monitored. Electronic testers modified with 20 multilayers of stearic acid were better protected from the accelerated aging conditions than the testers modified with 1 monolayer or 50 multilayers. Obtained results suggest that the thickness of the interphase region separating IC surface and polymeric film should be in the range of 10 nm.