Bamboo Inspired Silicon Anodes with Ultrahigh Initial Coulombic Efficiency and High Capacity for the Li-Ion Batteries.

Silicon is regarded as the most promising candidate due to its ultrahigh theoretical energy density (4200 mAh g-1). However, the large volume expansion of silicon nanoparticles would result in the destruction of electrodes and a shortened cycle lifetime. Here, inspired by the natural structure of bamboo, the silicon anode with vascular bundle-like structure is proposed to improve the electrochemical performance for the first time. The dense channel wall in the silicon anode can accommodate the volume change of silicon nanoparticles and the transport of ions and electrons is also enhanced. The obtained silicon anodes display excellent mechanical properties (50% compression resilience and the average peel force of 4.34 N) and good wettability. What more, the silicon anodes exhibit high initial coulombic efficiency (94.5%), excellent cycle stability (2100 mAh g-1 after 300 cycles) which stands out among the silicon anodes. Specially, the silicon anode with impressive areal capacity of 36.36 mAh cm-2 and initial coulombic efficiency of 84% is also achieved. This work offers a novel and efficient strategy for the preparation of the flexible electrodes with outstanding performance.

Recent Advances of Bio-Based Hydrogel Derived Interfacial Evaporator for Sustainable Water and Collaborative Energy Storage Applications.

Solar interfacial evaporation strategy (SIES) has shown great potential to deal with water scarcity and energy crisis. Biobased hydrogel derived interfacial evaporator can realize efficient evaporation due to the unique structure- properties relationship. As such, increasing studies have focused on water treatment or even potential accompanying advanced energy storage applications with respect of efficiency and mechanism of bio-based hydrogel derived interfacial evaporation from microscale to molecular scale. In this review, the interrelationship between efficient interfacial evaporator and bio-based hydrogel is first presented. Then, special attention is paid on the inherent molecular characteristics of the biopolymer related to the up-to-date studies of promising biopolymers derived interfacial evaporator with the objective to showcase the unique superiority of biopolymer. In addition, the applications of the bio-based hydrogels are highlighted concerning the aspects including water desalination, water decontamination atmospheric water harvesting, energy storage and conversion. Finally, the challenges and future perspectives are given to unveil the bottleneck of the biobased hydrogel derived SIES in sustainable water and other energy storage applications.

The Enhancement Origin of Antioxidant Property of Carboxylated Lignin Isolated from Herbaceous Biomass Using the Maleic Acid Hydrotropic Fractionation.

Lignin is endowed with antioxidant activity due to its diverse chemical structure. It is necessary to explore the relationship between antioxidant activity and the chemical structure of the lignin to develop its high-value utilization. Herein, we employed maleic acid (MA) as a hydrotropic agent to preferably isolate the lignin from distinct herbaceous sources (wheat straw and switchgrass) under atmospheric pressure conditions. The resultant acid hydrotropic lignin (AHL) isolated from wheat straw exhibited high radical scavenging rates, up to 98% toward DPPH and 94% toward ABTS. Further investigations indicated that during the MA hydrotropic fractionation (MAHF) process, lignin was carboxylated by MA at γ-OH of the side-chain, providing additional antioxidant activity from the carboxy group. It was also found that the radical scavenging rate of AHL has a positive correlation with carboxyl, phenolic hydroxyl contents, and the S-G (syringyl-guaiacyl) ratio, which could be realized by increasing the MAHF severity. Overall, this work underlies the enhancement origin of the antioxidant property of lignin, which will facilitate its application in biological fields as an efficient, cheap, and renewable antioxidant additive.

Highly Transparent, Strong, and Flexible Films with Modified Cellulose Nanofiber Bearing UV Shielding Property.

This work investigates multifunctional composite films synthesized with cellulose nanofibers (CNFs) and poly(vinyl alcohol) (PVA). First, TEMPO-oxidized CNFs were modified in the heterogeneous phase with benzophenone, diisocyanate, and epoxidized soybean oil via esterification reactions. A thorough characterization was carried out via elemental analysis as well as FT-IR and X-ray photoelectron spectroscopies and solid-state NMR. Following, the surface-modified CNFs were combined with PVA to endow composite films with UV-absorbing capabilities while increasing their thermomechanical strength and maintaining a high light transmittance. Compared to neat PVF films, the tensile strength, Young modulus, and elongation of the films underwent dramatic increases upon addition of the reinforcing phase (maximum values of ∼96 MPa, ∼ 714 MPa, and ∼350%, respectively). A high UV blocking performance, especially in the UVB region, was observed for the introduced multifunctional PVA films at CNF loadings below 5 wt %. The trade-off between modified nanofibril function as interfacial reinforcement and aggregation leads to an optimum loading. The results indicate promising applications, for example, in active packaging.

A tough, strong, and fast-curing phenolic resin enabled by dopamine-grafted chitosan and polyethyleneimine-functionalized graphene.

Phenolic resins are widely used for outdoor and structural wood-based panels; however, they are challenged by high curing temperatures, low curing rates, and high brittleness. Inspired by lobster epidermis hardening, a tough, strong, and fast-curing phenolic resin (named DCS/PG/PF) was proposed herein. In this approach, dopamine-grafted chitosan (DCS) and polyethyleneimine-functionalized graphene (PEI@G) were incorporated into neat phenol formaldehyde (PF) resin. The gel time and maximum curing temperature of DCS/PG/PF resin were considerably reduced from 445 s and 147.8 °C for the neat PF resin to 317 s and 127.8 °C, respectively. This was attributed to the oxidative crosslinking of catechol moieties in DCS and amino groups in PEI@G within the naturally alkaline environment of phenolic resins in addition to the high reactivity between catechol moieties and PF chains as well as between amino and PF chains. The prepared resin demonstrated a dry bonding strength of 2.56 MPa, wet bonding strength of 1.81 MPa, and debonding work of 0.714 J, exhibiting a considerable increase of 16.9 %, 52.1 %, and 95.1 %, respectively, compared with those of the PF resin. These improvements were attributed to the dense organic-inorganic hybrid crosslinking network formed in the DCS/PG/PF. Furthermore, the DCS/PG/PF resin exhibited enhanced thermal stability.

S-scheme electron transfer promoted by novel indium oxide quantum dot-loaded carbon nitride heterojunctions promoted using oxidized indium monomers.

The graphitic carbon nitride (g-C3N4) photocatalysis has emerged as a clean method for cleaving lignin-linked bonds due to its mild and sunlight-driven reaction conditions. The fast electron-hole pair complex of g-C3N4 constrains its degradation efficiency, making the heterojunction construction a popular solution. The conventional methods of preparing g-C3N4 heterojunctions by physical mixing destroy π-conjugations in g-C3N4, reducing the adsorption of lignin containing benzene rings. In this study, a novel indium oxide (In2O3) quantum dot-g-C3N4 0D/2D heterojunction was prepared through the high-temperature oxidation of pre-prepared indium-doped g-C3N4. The introduction of In2O3 at the quantum dot level minimizes the interference with lignin adsorption capacity. The strong combination of the two (In2O3 and g-C3N4) increases the intersection interface area, promoting the S-scheme transfer route of the photogenerated electrons. Consequently, this enhances the photoelectric conversion efficiency and carrier lifetime of the heterojunction, and inhibits the rapid recombination of photogenerated electron-hole pairs in g-C3N4. The proposed heterojunction was 3 times more efficient than g-C3N4 alone for selective cleavage of lignin ß-O-4 bonds after 2 h of sunlight irradiation. Combined with inhibitor experiments and gas chromatography-mass spectrometry analysis, this paper defines the reactive oxides and proposes a cleavage pathway for the lignin ß-O-4 bonds in In2O3-g-C3N4 heterojunction system.

Dual regulation of thermal conductivity and mechanical performance of nano cellulose-based composite via mimicking plant cell wall structure.

Combining thermal conductive fillers and flexible polymers is an agile approach to fabricating composites with heat-conducting performance. However, the thermal conductivity of the composites is hard to reach an equal level to the functional fillers. The mainspring is that the thermally conductive pathways within the composite could not be well-constructed due to the air-induced interface thermal resistance. Herein, inspired by the plant cell wall structure, polyvinyl alcohol (PVA) with abundant hydroxyl groups was adopted as a binder for boosting the thermally conductive pathways construction between cellulose nanofiber (CNF) and alkalized hexagonal boron nitride (BN-OH), also for strengthening the mechanical performance of the composite. The results showed that the tensile strength and through-plane thermal conductivity of the composite were high up to 91.0 MPa and 2.2 W m-1 K-1 at 40 wt% PVA content, exhibiting 121 % and 450 % enhancements compared to pure CNF film (41.2 MPa and 0.4 W m-1 K-1). Moreover, the composite also presented high thermal stability (decomposition temperature of onset was 218 °C) and good hydrophobicity properties. Overall, this study innovatively proposes an idea for enhancing the thermal conductivity and improving the mechanical properties of the composite, which is indispensable for developing thermal management materials for next-generation electronics.

Comprehensive insights of pretreatment strategies on the structures and bioactivities variation of lignin-carbohydrate complexes.

Introduction: Due to its unique structural features and bioactivities, the lignin-carbohydrate complex (LCC) displays great potential in vast industrial applications. However, the elucidation of how various pretreatment methods affect the structure and bioactivities remains unaddressed. Method: The three pretreatment methods were systematically studied on the variations of structures and bioactivities, and the Gramineae plant, i.e., wheat straw, was adopted in this study. The structures and bioactivities variation caused by different pretreatments were studied in detail. Result and Discussion: The results showed that compared to physical or chemical pretreatments, biological pretreatment was the most effective approach in improving the bioactivities of LCC. The LCC from biological pretreatment (enzymatic hydrolysis, ELCC4) had more functional groups while the lower weight-average molecular weight (Mw) and polydispersity index (PDI) were well-endowed. The highest antioxidant abilities against ABTS and DPPH of ELCC4 were high up to 95% and 84%, respectively. Furthermore, ELCC4 also showed the best ultraviolet (UV)-blocking rate of 96%, which was increased by 6% and 2% compared to LCC8 (physical pretreatment) and LLCC4 (chemical pretreatment). This work prospectively boosts the understanding of pretreatment strategies on the structures and bioactivities variation of LCC and facilitates its utilization as sustainable and biologically active materials in various fields.

Efficient Fast Fractionation of Biomass Using a Diol-Based Deep Eutectic Solvent for Facilitating Enzymatic Hydrolysis and Obtaining High-Quality Lignin.

Current DES pretreatment is often performed under relatively severe conditions with high temperature, long time, and high DES usage. This work studied a short-time diol DES (deep eutectic solvent) pretreatment under mild conditions to fractionate the bamboo, facilitate enzymatic hydrolysis, and obtain high-quality lignin. At an optimized condition of 130 °C for only 10 min, lignin and xylan removal reached 61.34 % and 84.15 %, with residual glucan showing a ~90 % enzymatic hydrolysis yield. Equally important, the dissolved lignin could be readily recovered with 97.51 % yield, exhibiting 96.65 % ß-O-4 preservation. The fractionation and lignin protection mechanisms were unveiled by XRD, FTIR, cellulose-DP, 2D HSQC NMR, 31P NMR and GPC analysis. This study highlighted that short-time fractionation of bamboo can be achieved by a diol-based DES which is an ideal strategy to upgrade the lignocellulose biomass for high enzymatic hydrolysis yields and high-quality lignin stream.

Preparation and characterization of cellulose nanofibril/chitosan aerogels with high-adsorbability and sensitive indication for indoor free formaldehyde.

The toxic volatile organic compounds (VOCs), especially formaldehyde (FA), released from decoration materials pose a great threat to human health. In this study, formaldehyde adsorption performance of the specially formulated nanocellulose/chitosan aerogel (CNFCA) was investigated in simulated atmosphere. The physicochemical property of the composite aerogel was characterized, which had a large specific surface area (153.67 m2/g), a rough surface and an ultra-thin and porous structure. The composite aerogel showed excellent adsorption capacity for the formaldehyde, its theoretical maximum adsorption capacity was as high as 83.89 mg/g, and the adsorption process was more in accordance with the pseudo-second-order kinetics. The chromogenic reaction between the 4-amino-3-benzo-5-mercapto-1,2,4-triazolium (AHMT) and CNFCA was found that the color of the composite aerogel was depended on the free formaldehyde concentration. Based on this phenomenon, a colorimetric card was proposed and built to detection the formaldehyde in the atmosphere. Moreover, the adsorption mechanism research was found that the CNFCA with a multilayer structure belonged to physicochemical complex adsorption.

Synthesis of amino-functionalized nanocellulose by guanidine based deep eutectic solvent and its application in fine fibers retention.

A guanidine-based Deep Eutectic Solvent (DES) consisting of 1,3-diaminoguanidine monohydrochloride and glycerol was utilized to prepare C-CNC from dissolving pulp. The pulp fibers were oxidized to dialdehyde cellulose by periodate, then fibrillated through the hydrogen bonds shear of DES and aminocationized through Schiff base effect of the amino groups in the DES solvent to obtain C-CNC. The results revealed that the characterization of the DES (such as viscosity, polarity, and pH) was related to the molar ratio of glycerol/guanidine-salts. The hydrogen bond network structure of DES solvent with optimal system was simulated by DFT and its damage to fiber hydrogen bond network was predicted. The C-CNC produced under the optimal reaction conditions (molar ratio of 1:2, 90 °C for 2 h) was highly dispersible with an average length and diameter of 85 ± 35 nm and 5.0 ± 1.2 nm, a charge density of 2.916 mol/g. C-CNC exhibited excellent flocculation when added to fine fiber suspensions of chemomechanical slurries, achieving rapid flocculation and settling onto fibers in <1 min. The DES solvent maintained its reactivity after 5 cycles. This study lays the foundation for the batch preparation of nanocellulose in an environmentally friendly manner and its application as a green additive in paper industry.

The mechanism of solid acid-catalyzed bamboo sawdust liquefaction under polyol systems.

Solid acid catalysts are widely used in the field of biomass catalytic conversion owing to their advantages of low environmental pollution, easy separation and reusability. Nevertheless, there are relatively few studies on the mechanism of solid acid liquefaction for biomass. In this study, the effect of acid strength and acid amount of various solid acids on the liquefaction efficiency has been investigated using waste bamboo sawdust generated from the pulp and paper industry as the raw material. In addition, the physicochemical changes of cellulose, hemicellulose and lignin during the reaction process of bamboo sawdust have been studied, and the liquefaction mechanism of bamboo sawdust under the action of various solid acids has been concluded. As a result, the liquefaction efficiency of bamboo sawdust under the polyol system of PEG400/propanetriol is mainly related to the acid strength of the solid acid, and the greater the acid strength of the solid acid, the better the catalytic effect on the bamboo sawdust, in which the residual amount of bamboo sawdust liquefaction catalyzed by the SPA catalyst is only 17.72%. Noteworthy, the most difficult component to liquefy is the crystallization of natural cellulose I into cellulose II during the reaction process, which is the primary obstacle to the complete liquefaction of bamboo sawdust by solid acid. Overall, these findings are valuable for the high value utilization of waste bamboo sawdust in the pulp and paper industry, as well as the application of solid acid catalytic technology for biomass.

Template-directed growth of sustainable carboxymethyl cellulose-based aerogels decorated with ZIF-67 for activation peroxymonosulfate degradation of organic dyes.

A novel 3D advanced oxidation catalyst ZIF-67@C-CMC/rGO based on carboxymethyl cellulose (CMC) and reduced graphene oxide (rGO) was successfully synthesized by facile in-situ growth of Zeolitic imidazolate framework-67 (ZIF-67). C-CMC/rGO aerogel crosslinked by poly (methyl vinyl ether-alt-maleic acid)/polyethylene glycol system (PMVEMA/PEG) as the host material was prepared through a template-directed growth model and exhibited outstanding mechanical properties. The sustainable composite was successfully used as an efficient catalyst for activating peroxymonosulfate (PMS) to generate SO4-· and ·OH, then leads to the removal of organic contaminants. As a result, almost 100 % of 10 ppm MB/RhB solution can be degraded within 5 min due to the combination of catalyst aerogel and PMS. What's more, the aerogel showed a wide pH tolerance range from 4 to 9 and maintained up to 93 % of the contaminant removal rate compared to the initial value after four cycles. The ZIF-67@C-CMC/rGO aerogel with high load rate and excellent catalytic degradation performance not only solved the problem of dispersion and recovery of ZIF-67 particles, but also provided a new idea for the compound wastewater purification in sulfate radical-based advanced oxidation processes (SR-AOPs).

Selective degradation of hemicellulose and lignin for improving enzymolysis efficiency via pretreatment using deep eutectic solvents.

Deep eutectic solvents (DESs) with different acidity and alkalinity were applied for biomass pretreatment, and the conditions were optimized by response surface methodology. The results showed that lactic acid/betaine hydrochloride had the optimal pretreatment efficiency, where the removal rates of hemicellulose and lignin came up to 89% and 73%, and the enzymolysis efficiency was as high as 92%. Furthermore, eight types of chloride salts with different valence states were introduced into the DESs as the third component. The chloride salts could improve the pretreatment efficiency and positively correlated with the metal valence state. Specifically, AlCl3 was significantly superior in improving the pretreatment efficiency, where the enzymolysis efficiency reached 96% due to the destruction of crystalline region and the esterification of partial cellulose. Therefore, it is proposed that adding highly valent metal salts to acidic DESs has higher pretreatment and enzymatic efficiency.

A novel mineral-acid free biphasic deep eutectic solvent/γ-valerolactone system for furfural production and boosting the enzymatic hydrolysis of lignocellulosic biomass.

The failure of hemicellulose valorization in a deep eutectic solvent (DES) pretreatment has become a bottleneck that challenges its further development. To address this issue, this study developed a DES/GVL (γ-valerolactone) biphasic system for effective hemicellulose-furfural conversion, enhanced cellulose saccharification and lignin isolation. The results indicated that the biphasic system could significantly improve the lignin removal (as high as 89.1%), 86.0% higher than the monophasic DES, accompanied by âˆ¼100% hemicellulose degradation. Notably, the GVL in the biphasic solvent restricted the condensation of hemicellulose degradation products, which as a result generated large amount of furfural in the pretreatment liquid with a yield of 68.6%. With the removal of hemicellulose and lignin, cellulose enzymatic hydrolysis yield was boosted and reached near 100%. This study highlighted that the novel DES/GVL is capable of fractionating the biomass and benefiting their individual utilization, which could provide a new biorefinery configuration for a DES pretreatment.

Alkali-facilitated deep eutectic solvent for effective bamboo saccharification.

Herein, a Na2S promoted deep eutectic solvent (DES) was established to reduce the natural recalcitrance of moso bamboo (MB) and improve the subsequent enzymatic saccharification. It was found that the addition of Na2S (Choline chloride/Ethylene glycol/Na2S) dramatically promoted the deconstructions of lignin with highest removal of 74.67 %, but at the same time preserved glucan and hemicellulose to the maximum extent. With the fractionation, the enzymatic saccharification yield of pretreated MB can reach 100 % under the pretreatment condition of 140 °C, and lignin could be readily recovered with a high yield of 81.47 %. The proposed DES is superior to normal alkaline DES in terms of the higher lignin removal and recovery yield, carbohydrate preservation and enzymatic digestibility, which indicated Na2S as a novel and powerful reinforcer enhancing the DES fractionation efficiency.

The bamboo delignification saturation point in alkaline hydrogen peroxide pretreatment and its association with enzymatic hydrolysis.

A delignification saturation point (DSP) was observed for bamboo alkaline hydrogen peroxide pretreatment (AHP). Lignin removal was increased from 52.23% to ∼70% when increasing H2O2 dosage from 0% to 2% at the optimum pH, but it cannot be further reinforced as increasing the H2O2. With partial lignin preserved, the glucan hydrolysis yield was found to have a ceiling of ∼80%. This study indicated a strong association between enzymatic digestibility and lignin removal. Anatomical analysis by fluorescence microscope and confocal Raman microscope revealed that the undegradable lignin was mainly existing in the cell corner of sclerenchyma fibers, causing the DSP in the bamboo AHP. Finally, the residual lignin in pretreated bamboo was characterized with GPC, HSQC NMR, and 31P NMR, which revealed the nature of DSP. This study could help to understand the lignin modification during the AHP and further contribute to the establishment of a chemical-saving biorefinery.

A study on coconut fatty acid diethanolamide-based polyurethane foams.

The possibility of using coconut fatty acid diethanolamide, a derivate from coconut oil as a bio-based polyol for the synthesis of polyurethane foam was explored. The intrinsic tertiary amine moiety in this polyol (p-CFAD) endowed an auto-catalytic effect in the synthesis process of polyurethane foams, combined with a shorter cream and gelation time compared to the fossil-based polyol 3152. H-nuclear magnetic resonance (1H-NMR) and Fourier transform infrared spectrometry (FTIR) were conducted to characterize the chemical structural features of the p-CFAD, and rheology measurement showed the shear-thinning behavior due to the branched structure. A thermal conductivity comparable to the commercial rigid polyurethane foam was achieved when 40wt% fossil-based polyol 3152 was substituted with the bio-based p-CFAD. With the increased content of the p-CFAD, a transition of the physical properties from rigid PU foam to soft PU foam was observed. Scanning electron microscopy (SEM) revealed the occurrence of the interconnected pores on the cell walls with the increase of the added p-CFAD, implying the possibility of regulating the cellular structure and foam properties via the incorporation of the p-CFAD. Results showed the feasibility of using p-CFAD as a potential polyol in the development of bio-based polyurethane foams with high performance.

Assessing the availability of two bamboo species for fermentable sugars by alkaline hydrogen peroxide pretreatment.

This study comprehensively investigated two bamboo species (i.e. Neosinocalamus affinis and Phyllostachys edulis) in terms of their cell wall ultrastructure, chemical compositions, enzymatic saccharification, and lignin structure before and after alkaline hydrogen peroxide pretreatment (AHP). During AHP, Neosinocalamus affinis (NAB) had higher delignification than Phyllostachys edulis (PEB), and thus showed better enzymatic digestibility (93.05% vs 53.57% for glucan). The fundamental chemical behavior of the bamboo lignins was analyzed by fluorescence microscope (FM), confocal Raman microscope (CRM), molecular weight analysis, and 2D HSQC-NMR. Results indicated that the PEB has thicker cell wall and more concentrated lignin in its compound middle lamella and cell corner middle lamella than NAB. Moreover, PEB lignin contains more G units (S/G of 0.95), in evident contrast to that of NAB lignin (S/G of 1.30), which favor the formation of C-C linkages, thus impeding its degradation during the AHP.

Utilization of guaiacol-based deep eutectic solvent for achieving a sustainable biorefinery.

This study proposed a renewable deep eutectic solvent (DES) pretreatment using lignin-derived guaiacol as the hydrogen bond donor. The DES showed excellent biomass fractionation efficiency after the incorporation of trace AlCl3 as the reinforcer, which removed 79.1 % lignin while preserving more than 90 % glucan. The pretreated bamboo exhibited 96.2 % glucan enzymatic hydrolysis yield at only 110 °C. The physicochemical properties of the pretreated solids were comprehensively investigated to explain how the DES fractionation overcame the biomass recalcitrance. The regenerated lignin from the DES pretreatment was also analyzed, which revealed that lignin ß-O-4 bond was significantly cleaved. This guaiacol-based DES could greatly contribute to establish a closed-loop biorefinery sequence with high lignin fractionation efficiency and great solvent recyclability.