Dark State of the Thiele Hydrocarbon: Efficient Solvatochromic Emission from a Nonpolar Centrosymmetric Singlet Diradicaloid.

In this work, a comprehensive investigation of the photoinduced processes and mechanisms linked to the luminescence of a novel nonperchlorinated Thiele hydrocarbon (TTH) is presented. Despite the comparable diradical character of TTH (y0 = 0.32-0.44) and the unsubstituted Thiele hydrocarbon (TH) (y0 = 0.30), the polyhalogenated species is inert and photostable, showing an intense deep-red/near-infrared (NIR) fluorescence (photoluminescence quantum yield (PLQY) = 0.84 in toluene) even at room temperature and in the solid state (PLQY = 0.19). TTH displays a large Stokes shift (307 nm in benzonitrile) and solvatochromic behavior, which is unusual for a centrosymmetric, nonpolar, and low-conjugated species. These outstanding emission features are interpreted through quantum-chemical calculations, indicating that its fluorescence arises from the low-lying dark doubly excited zwitterionic state, typically found at low excitation energies in diradicaloids, acquiring dipole moment and intensity by state mixing via twisting around the strongly elongated exocyclic CC bonds of the excited p-quinodimethane (pQDM) core, with a mechanism similar to sudden polarization occurring in olefins. Such a mechanism is derived from ns and fs transient absorption measurements.

Supramolecular Biohybrid Construct for Photoconversion Based on a Bacterial Reaction Center Covalently Bound to Cytochrome c by an Organic Light Harvesting Bridge.

A supramolecular construct for solar energy conversion is developed by covalently bridging the reaction center (RC) from the photosynthetic bacterium Rhodobacter sphaeroides and cytochrome c (Cyt c) proteins with a tailored organic light harvesting antenna (hCy2). The RC-hCy2-Cyt c biohybrid mimics the working mechanism of biological assemblies located in the bacterial cell membrane to convert sunlight into metabolic energy. hCy2 collects visible light and transfers energy to the RC, increasing the rate of photocycle between a RC and Cyt c that are linked in such a way that enhances proximity without preventing protein mobility. The biohybrid obtained with average 1 RC/10 hCy2/1.5 Cyt c molar ratio features an almost doubled photoactivity versus the pristine RC upon illumination at 660 nm, and ∼10 times higher photocurrent versus an equimolar mixture of the unbound proteins. Our results represent an interesting insight into photoenzyme chemical manipulation, opening the way to new eco-sustainable systems for biophotovoltaics.

Sparkling Organic Phosphorescence from Fluorinated Tetrathia[7]helicenes: Synthesis and Photophysical, Electrochemical and Computational Studies.

Structure-property correlations in the thiahelicene family are often not trivial beacuse most of the functional groups present on the helical scaffold modify the conjugation size of the π-system. Selecting fluorine-containing groups to provide strong inductive effects without interacting with low-lying orbitals of the system could be the way to overcome the issue. Here we report a study on three fluorine-functionalized tetrathia[7]helicenes, highlighting interesting correlations between the position of the functional groups and the conjugated skeleton properties. Helicenes Heli-F2 and Heli-CF-F2 were prepared by photoinduced isomerization-electrocyclization (the Mallory photocyclization) of the corresponding fluorinated benzodithienyl-ethenes Alk-F2 and Alk-CF-F2, which were prepared in high yields through stereo-conservative Stille reaction. Notably these helicenes were found to display green phosphorescence around 530-550 nm, and the studies suggest an efficient spin-orbit coupling mechanism in these high-energy triplet nonplanar conjugated molecules. Both helicenes and their precursors were thoroughly characterized by means of optical and electrochemical measurements, while DFT calculations enable a rationale on their structure-property correlations to be defined.

Chiral Diketopyrrolo[3,4-c]pyrrole-1,2,3-1H-triazole Dyes with Highly Tuneable Properties in Solution and Thin Films.

We have studied the impact of achiral substituents on the chiral supramolecular architectures of diketopyrrolo[3,4-c]pyrrole-1,2,3-1H-triazole (DPP) dyes. We decorated the same chiral DPP motif with substituent groups on the nitrogen atoms of the lactam moiety: the hydrophobic n-octyl alkyl chain, the hydrophilic tri(ethylene glycol) (TEG) chain and the thermo-cleavable tert-butoxycarbonyl (t-Boc) carbamate group. In spite of having identical conjugated chromophore and chiral appendages, in aggregated form the three dyes displayed profoundly different optical, chiroptical, electrochemical and thermal features. ECD measurements revealed differences in the aggregation modes, which would be inaccessible by most other techniques. We found strong chiroptical features, which would have major implications in the context of chiral organic opto-electronics and in the development of other highly innovative technological applications.

Chiral Diketopyrrolo[3,4-c]pyrrole-1,2,3-1H-triazole Dyes with Highly Tuneable Properties in Solution and Thin Films.

Invited for the cover of this issue are the research groups of Lorenzo Di Bari at the University of Pisa and Gianluca Maria Farinola at the University of Bari Aldo Moro. The image depicts three diketopyrrolo[3,4-c]pyrrole-1,2,3-1H-triazole dyes with the same chiral appendage R* but different achiral substituent groups Y showing profoundly different features in their aggregated form. Read the full text of the article at 10.1002/chem.202300291.

Aggregation Modes of Chiral Diketopyrrolo[3,4-c]pyrrole Dyes in Solution and Thin Films.

The chiroptical features of chiral diketopyrrolo[3,4-c]pyrrole (DPP) derivatives have been only marginally investigated to date. In this regard, we have synthesized ad hoc four chiral DPP dyes, functionalized with enantiopure alkyl groups from natural sources either on the lactam moieties or on the terminal positions of the π-conjugated backbone, to promote an efficient self-assembly into chiral supramolecular structures. For each of them, the aggregation modes has been investigated by absorbance and ECD spectroscopies in conditions of solution aggregation and on thin films, considering the effects of deposition technique (drop casting vs. spin coating) and post-deposition operations (solvent and thermal annealing). The effect of the structure of lateral π-conjugated units attached to the central DPP scaffold, as well as that of the position of the alkyl chiral group, has been assessed. ECD revealed superior capability, compared to absorbance spectroscopy, to provide information on the aggregation modes and to detect the possible co-existence of multiple aggregation pathways.

Polydopamine coating of living diatom microalgae.

Many microorganisms produce specific structures, known as spores or cysts, to increase their resistance to adverse environmental conditions. Scientists have started to produce biomimetic materials inspired by these natural membranes, especially for industrial and biomedical applications. Here, we present biological data on the biocompatibility of a polydopamine-based artificial coating for diatom cells. In this work, living Thalassiosira weissflogii diatom cells are coated on their surface with a polydopamine layer mimicking mussel adhesive protein. Polydopamine does not affect diatoms growth kinetics, it enhances their resistance to degradation by treatment with detergents and acids, and it decreases the uptake of model staining emitters. These outcomes pave the way for the use of living diatom cells bearing polymer coatings for sensors based on living cells, resistant to artificial microenvironments, or acting as living devices for cells interface study.

Highly Stable and Red-Emitting Nanovesicles Incorporating Lipophilic Diketopyrrolopyrroles for Cell Imaging.

Diketopyrrolopyrroles (DPPs) have recently attracted much interest as very bright and photostable red-emitting molecules. However, their tendency to form nonfluorescent aggregates in water through the aggregation-caused quenching (ACQ) effect is a major issue that limits their application under the microscope. Herein, two DPP molecules have been incorporated into the membrane of highly stable and water-soluble quatsomes (QS; nanovesicles composed of surfactants and sterols), which allow their nanostructuration in water and, at the same time, limits the ACQ effect. The obtained fluorescent organic nanoparticles showed superior structural homogeneity, along with long-term colloidal and optical stability. A thorough one- (1P) and two-photon (2P) fluorescence characterization revealed the promising photophysical features of these fluorescent nanovesicles, which showed a high 1P and 2P brightness. Finally, the fluorescent QSs were used for the in vitro bioimaging of Saos-2 osteosarcoma cell lines; this demonstrates their potential as nanomaterials for bioimaging applications.

Synthesis and Computational Study of Semicroconaines and Nonsymmetric Croconaines.

The synthesis of two new dye families of croconic acid derivatives, semicroconaine and nonsymmetric croconaine dyes, is reported for the first time. These compounds show strong absorption in the UV-visible and NIR, respectively. Semicroconaine dyes were obtained by a scalable and efficient condensation of croconic acid with aromatic heterocyclic methylene-active compounds. The subsequent reaction of the semicroconaine dyes with aromatic heterocyclic compounds affords nonsymmetric croconaines. The structure and electronic properties of the synthesized compounds have been investigated by preliminary theoretical calculations at DFT level of approximation.

Solvent-Free Pd-Catalyzed Heteroaryl-Aryl Coupling via C-H Bond Activation for the Synthesis of Extended Heteroaromatic Conjugated Molecules.

Direct arylation of thienopyrrolodione, diketopyrrolopyrroles, benzodithiophene derivatives, and fluorinated heteroarenes with functionalized aryl iodides is proven in solvent-free and non-anhydrous conditions. The reaction is performed in the presence of air and tolerates several functional groups on both the coupling partners, enabling a convenient synthesis of extended heteroaromatic conjugated molecules.

Synthetic Antenna Functioning As Light Harvester in the Whole Visible Region for Enhanced Hybrid Photosynthetic Reaction Centers.

The photosynthetic reaction center (RC) from the Rhodobacter sphaeroides bacterium has been covalently bioconjugated with a NIR-emitting fluorophore (AE800) whose synthesis was specifically tailored to act as artificial antenna harvesting light in the entire visible region. AE800 has a broad absorption spectrum with peaks centered in the absorption gaps of the RC and its emission overlaps the most intense RC absorption bands, ensuring a consistent increase of the protein optical cross section. The covalent hybrid AE800-RC is stable and fully functional. The energy collected by the artificial antenna is transferred to the protein via FRET mechanism, and the hybrid system outperforms by a noteworthy 30% the overall photochemical activity of the native protein under the entire range of visible light. This improvement in the optical characteristic of the photoenzyme demonstrates the effectiveness of the bioconjugation approach as a suitable route to new biohybrid materials for energy conversion, photocatalysis, and biosensing.

Discrimination of mercuric ions in piezoelectric sensors with a conjugated polymeric active layer.

The synthetic conjugated poly(1,4-arylene-2,5-thienylene) containing benzo[c][2,1,3]thiadiazole monomeric units (Bz-PAT) is proposed as active layer for the selective detection of mercuric ions. The Bz-PAT polymer chemical structure induces the formation of a disordered film with numerous vacancies and the size of these defects could be exploited for a reversible trapping of mercuric ions. For these reasons the Langmuir-Schaefer (LS) deposition method has been employed for transferring Bz-PAT layers with the desired accurate bi-dimensional organization control of the layer and with a high control of the deposition parameters. In this contribution, the frequency variation of quartz crystal microbalances functionalized with 10, 20, 30 and 40 LS runs of Bz-PAT have been investigated in response to the injection of aqueous solutions of HgCl2, Pb(NO3)2, NiCl2, CdCl2 and ZnSO4 at different concentrations (0.5 mM, 1 mM, 5 mM). An almost linear dependence on the number of the LS layers and hence on the film thickness, measured by means of ellipsometric spectroscopy, has been found in terms of sensor response to concentration of Hg2+ ions fluxed. By means of UV-Vis spectroscopy, the variations in the π-π* absorption band of the polymer, attributed to the thiophene segment, induced by HgCl2 injection has been analyzed and explained as a consequence of the electron transfer from the mercuric ion to the polymer solid film. These results, together with the linear relation found between the number of deposited layers and LS film thickness, suggest that the sensing mechanism can be explained both by an electron interaction between active layer and analyte and a diffusion mechanism of Hg2+ into the solid film that reaches an asymptotic value at 30 runs (about 80 nm), then a higher number of layers does not influence the sensor sensibility.

An aryleneethynylene fluorophore for cell membrane staining.

The use of an amphiphilic aryleneethynylene fluorophore as a plasma membrane marker in fixed and living mammalian cells and liposome model systems is demonstrated. We show here that the optical properties of the novel dye are almost independent on pH, in the range 5.0-8.0. Spectroscopic characterization performed on unilamellar liposomes ascertained that the fluorescence intensity of the aryleneethynylene fluorophore greatly increases after incorporation in lipidic membranes. Experiments performed on different mammalian cells demonstrated that the novel membrane marker exhibits fast staining and a good photostability that make it a suitable tool for live cell imaging. Importantly, the aryleneethynylene fluorophore was also shown to be a fast and reliable blue membrane marker in classical multicolor immunofluorescence experiments. This study adds new important findings to the recent exploitation of the wide class of aryleneethynylene molecules as luminescent markers for biological investigations.

The correct assignment of stereochemistry in di-µ-dichlorido-bis{bis[2-(5-benzylsulfonyl)-3-fluoro-2-(pyridin-2-yl)phenyl-κ2N,C1]iridium(III)} toluene monosolvate.

The title complex, [Ir2(C18H13FNO2S)4Cl2]·C7H8, was crystallized from dichloromethane solution under a toluene atmosphere. It is a dimeric complex in which each of the two Ir(III) centres is octahedrally coordinated by two bridging chloride ligands and by two chelating cyclometalated 2-(4-benzylsulfonyl-2-fluorophenyl)pyridine ligands. The crystal structure analysis unequivocally establishes the trans disposition of the two cyclometalated ligands bound to each Ir(III) centre, contrary to our previous hypothesis of a cis disposition. The latter was based on the (1)H NMR spectra of a series of dimeric benzylsulfonyl-functionalized dichloride-bridged iridium complexes, including the compound described in the present work [Ragni et al. (2009). Chem. Eur. J. 15, 136-148]. The toluene solvent molecules, embedded in cavities in the crystal structure, are highly disordered and could not be modelled successfully; their contribution was removed from the refinement using the SQUEEZE routine in the program PLATON [Spek (2009). Acta Cryst. D65, 148-155].

Raman, WAXS, and Solid-State NMR Characterizations of Regenerated Silk Fibroin Using Lanthanide Ions as Chaotropic Agents.

Bombyx mori silk fibroin (SF) has been reported as a convenient natural material for regenerative medicine, optoelectronics, and many other technological applications. SF owes its unique features to the hierarchical organization of the fibers. Many efforts have been made to set up protocols for dissolution since many applications of SF are based on regenerated solutions and fibers, but chaotropic conditions required to disassemble the packing of the polymer afford solutions with poor crystalline behavior. Our previous research has disclosed a dissolution and regeneration process of highly crystalline fibers involving lanthanide ions as chaotropic agents, demonstrating that each lanthanide has its own unique interaction with SF. Herein, we report elucidation of the structure of Ln-SF fibers by the combined use of Raman spectroscopy, wide-angle X-ray scattering (WAXS), and solid-state NMR techniques. Raman spectra confirmed the coordination of metal ions to SF, WAXS results highlighted the crystalline content of fibers, and solid-state NMR enabled the assessment of different ratios of secondary structures in the protein.

Electroluminescent materials for white organic light emitting diodes.

White organic light emitting diodes (WOLEDs) are promising devices for application in low energy consumption lighting since they combine the potentialities of high efficiency and inexpensive production with the appealing features of large surfaces emitting good quality white light. However, lifetime, performances and costs still have to be optimized to make WOLEDs commercially competitive as alternative lighting sources. Development of efficient and stable emitters plays a key role in the progress of WOLED technology. This tutorial review discusses the main approaches to obtain white electroluminescence with organic and organometallic emitters. Representative examples of each method are reported highlighting the most significant achievements together with open issues and challenges to be faced by future research.

Enhancing the light harvesting capability of a photosynthetic reaction center by a tailored molecular fluorophore.

Light machine: The simplest photosynthetic protein able to convert sunlight into other energy forms is covalently functionalized with a tailored organic dye to obtain a fully functional hybrid complex that outperforms the natural system in light harvesting and conversion ability.

Bio-Inspired Redox-Adhesive Polydopamine Matrix for Intact Bacteria Biohybrid Photoanodes.

Interfacing intact and metabolically active photosynthetic bacteria with abiotic electrodes requires both establishing extracellular electron transfer and immobilizing the biocatalyst on electrode surfaces. Artificial approaches for photoinduced electron harvesting through redox polymers reported in literature require the separate synthesis of artificial polymeric matrices and their subsequent combination with bacterial cells, making the development of biophotoanodes complex and less sustainable. Herein, we report a one-pot biocompatible and sustainable approach, inspired by the byssus of mussels, that provides bacterial cells adhesion on multiple surfaces under wet conditions to obtain biohybrid photoanodes with facilitated photoinduced electron harvesting. Purple bacteria were utilized as a model organism, as they are of great interest for the development of photobioelectrochemical systems for H2 and NH3 synthesis, biosensing, and bioremediation purposes. The polydopamine matrix preparation strategy allowed the entrapment of active purple bacteria cells by initial oxygenic polymerization followed by electrochemical polymerization. Our results unveil that the deposition of bacterial cells with simultaneous polymerization of polydopamine on the electrode surface enables a 5-fold enhancement in extracellular electron transfer at the biotic/abiotic interface while maintaining the viability of the cells. The presented approach paves the way for a more sustainable development of biohybrid photoelectrodes.

Improving the In Vitro Removal of Indoxyl Sulfate and p-Cresyl Sulfate by Coating Diatomaceous Earth (DE) and Poly-vinyl-pyrrolidone-co-styrene (PVP-co-S) with Polydopamine.

Polydopamine (PDA) is a synthetic eumelanin polymer mimicking the biopolymer secreted by mussels to attach to surfaces with a high binding strength. It exhibits unique adhesive properties and has recently attracted considerable interest as a multifunctional thin film coating. In this study, we demonstrate that a PDA coating on silica- and polymer-based materials improves the entrapment and retention of uremic toxins produced in specific diseases. The low-cost natural nanotextured fossil diatomaceous earth (DE), an abundant source of mesoporous silica, and polyvinylpyrrolidone-co-Styrene (PVP-co-S), a commercial absorbent comprising polymeric particles, were easily coated with a PDA layer by oxidative polymerization of dopamine at mild basic aqueous conditions. An in-depth chemical-physical investigation of both the resulting PDA-coated materials was performed by SEM, AFM, UV-visible, Raman spectroscopy and spectroscopic ellipsometry. Finally, the obtained hybrid systems were successfully tested for the removal of two uremic toxins (indoxyl sulfate and p-cresyl sulfate) directly from patients' sera.

Excited-state switching by per-fluorination of para-oligophenylenes.

Fluorination has become a versatile route to tune the electronic and optical properties of organic conjugated materials. Herein we report a new phenomenon, excited-state switching by per-fluorination of para-oligophenylenes, placing a low intensity 1(1)B(2) state below the 1(1)B(1) state, giving rise to large Stokes shifts. The switching is attributed to the specific impact of fluorine on the delocalized and localized frontier orbitals as elucidated by quantum-chemical calculations. The sterical demands of the fluorine atom additionally diminish efficient conjugation along the chain, leading to hypsochromic shifts with respect to the unsubstituted counterparts and to a weak chain length dependence of the absorption and unstructured emission spectra and enhanced internal conversion.