Elevated removal of middle molecules without significant albumin loss with mixed-dilution hemodiafiltration for patients unable to provide sufficient blood flow rates.

BACKGROUND: We examined the hypothesis that mixed-dilution online hemodiafiltration (MIXED) rather than predilution online hemodiafiltration (PRE) could enable patients with low blood flow rate (Qb) to benefit from advantages of convective therapies. METHODS: Thirty-eight patients were included in a prospective, randomized, crossover and multicenter study conducted with a view to comparing the equilibrated Kt/V, reduction ratio (RR) of phosphates, ß2-microglobulin (ß2-M) and myoglobin (myo) between PRE and MIXED, each at two Qb values of 250 and 300 ml/min during 4 h sessions with a FX1000HDF dialyzer. Albumin losses (Alb) were also measured in 12 patients. RESULTS: MIXED was always found to be more efficient compared to PRE notably for middle molecules (MM). RRß2-M: MIX250: 81.3 ± 3.6 vs. PRE250: 75.2 ± 5.9; MIX300: 82.7 ± 3.6 vs. PRE300: 78.1 ± 5.4; RRmyo: MIX250: 70.2 ± 3.6 vs. PRE250: 42.6 ± 2.6; MIX300: 70.6 ± 3.6 vs. PRE300: 45.7 ± 3.6 and with Alb <3.0 g/session. CONCLUSION: MIXED allows patients unable to provide sufficiently high Qb to achieve high levels of MM removal.

Influence of pesticide residues on honey bee (Hymenoptera: Apidae) colony health in France.

A 3-yr field survey was carried out in France, from 2002 to 2005, to study honey bee (Apis mellifera L.) colony health in relation to pesticide residues found in the colonies. This study was motivated by recent massive losses of honey bee colonies, and our objective was to examine the possible relationship between low levels of pesticide residues in apicultural matrices (honey, pollen collected by honey bees, beeswax) and colony health as measured by colony mortality and adult and brood population abundance. When all apicultural matrices were pooled together, the number of pesticide residue detected per sampling period (four sampling periods per year) and per apiary ranged from 0 to 9, with the most frequent being two (29.6%). No pesticide residues were detected during 12.7% of the sampling periods. Residues of imidacloprid and 6- chloronicotinic acid were the most frequently detected in pollen loads, honey, and honey bee matrices. Several pairs of active ingredients were present concurrently within honey bees and in pollen loads but not in beeswax and honey samples. No statistical relationship was found between colony mortality and pesticide residues. When pesticide residues from all matrices were pooled together, a mixed model analysis did not show a significant relationship between the presence of pesticide residues and the abundance of brood and adults, and no statistical relationship was found between colony mortality and pesticide residues. Thus, although certain pesticide residues were detected in apicultural matrices and occasionally with another pesticide residual, more work is needed to determine the role these residues play in affecting colony health.

Detection of Chronic bee paralysis virus (CBPV) genome and its replicative RNA form in various hosts and possible ways of spread.

Detection of Chronic bee paralysis virus (CBPV) is reported for the first time in two species of ants (Camponotus vagus and Formica rufa) and in Varroa destructor. A quantitative real-time PCR (qPCR) method was used to detect and quantify CBPV in infected bees, ants and mites. A minus-strand-specific RT-PCR was used to assess viral replication. These results suggest a new way by which the infection may be spread and other sites of viral persistence in the close apiary environment.

First detection of Israeli acute paralysis virus (IAPV) in France, a dicistrovirus affecting honeybees (Apis mellifera).

Bee samples were collected in French apiaries that displayed severe losses and mortality during the winter (from November 2007 to March 2008). They were screened for the presence of Israeli acute paralysis virus (IAPV) by using RT-PCR. Five out of 35 surveyed apiaries, located in two different geographical areas, were found positive. This represents the first reported detection of IAPV in France. The specificity of the PCR products was checked by sequencing. The phylogenetic analysis showed that French isolates of IAPV were closely related to a cluster including American and Australian isolates. Nevertheless, most of American isolates previously reported to be associated to Colony Collapse Disorder (CCD) and an Israeli isolate first isolated in 2004 from dead bees were included in another cluster. Since IAPV was detected in only 14% of the affected apiaries, it was not possible to establish a causal link between IAPV and the severe winter losses that occurred.

Evaluation of a real-time two-step RT-PCR assay for quantitation of Chronic bee paralysis virus (CBPV) genome in experimentally-infected bee tissues and in life stages of a symptomatic colony.

A two-step real-time RT-PCR assay, based on TaqMan technology using a fluorescent probe (FAM-TAMRA) was developed to quantify Chronic bee paralysis virus (CBPV) genome in bee samples. Standard curves obtained from a CBPV control RNA and from a plasmid containing a partial sequence of CBPV showed that this assay provided linear detection over a 7-log range (R(2)>0.99) with a limit of detection of 100 copies, and reliable inter-assay and intra-assay reproducibility. Standardisation including RNA purification and cDNAs synthesis was also validated. The CBPV TaqMan methodology was first evaluated by quantifying the CBPV genomic load in bee samples from an experimental infection obtained by topical application. Up to 1.9 x 10(10) CBPV copies per segment of insect body (head, thorax and abdomen) were revealed whereas a lower CBPV genomic load was detected in dissected organs such as mandibular and hypopharyngeal glands, brain and alimentary canal (up to 7.2 x 10(6) CBPV copies). The CBPV genomic loads in different categories of bees from a hive presenting the trembling symptoms typical of Chronic paralysis were then quantified. Significantly higher CBPV loads were found in guard, symptomatic and dead bees (up to 1.9 x 10(13) CBPV copies) than in forager, drones and house bees (up to 3.4 x 10(6) CBPV copies). The results obtained for symptomatic or dead bees support the correlation between high CBPV genomic load and pathology expression. Moreover, the high CBPV genomic load revealed in guard bees highlights the possible pivotal role played by this category of bees in CBPV infection.

Pesticide residues in beeswax samples collected from honey bee colonies (Apis mellifera L.) in France.

In 2002 a field survey was initiated in French apiaries in order to monitor the health of honey bee colonies (Apis mellifera L.). Studied apiaries were evenly distributed across five sites located in continental France. Beeswax samples were collected once a year over 2 years from a total of 125 honey bee colonies. Multiresidue analyses were performed on these samples in order to identify residues of 16 insecticides and acaricides and two fungicides. Residues of 14 of the searched-for compounds were found in samples. Tau-fluvalinate, coumaphos and endosulfan residues were the most frequently occurring residues (61.9, 52.2 and 23.4% of samples respectively). Coumaphos was found in the highest average quantities (792.6 microg kg(-1)). Residues of cypermethrin, lindane and deltamethrin were found in 21.9, 4.3 and 2.4% of samples respectively. Statistical tests showed no difference between years of sampling, with the exception of the frequency of pyrethroid residues. Beeswax contamination was the result of both in-hive acaricide treatments and, to a much lesser extent, environmental pollution.

Determination of traces of fipronil and its metabolites in pollen by liquid chromatography with electrospray ionization-tandem mass spectrometry.

Fipronil is a pesticide suspected of having harmful effects on honey bees at microgram per kilogram levels. Considering the lack of methodology, it thus appeared to be necessary to develop a method for the determination of the lowest amounts of fipronil and its metabolites in pollen. This paper describes a new analytical method with a limit of quantification (LOQ) of 0.1 microg/kg for a representative sample weight of 5 g. In the case of a field study, this tool was used for checking the possible existence of fipronil and/or metabolites in pollen samples, but none of them contained residues higher than the LOQ. This three-step rapid method uses liquid-solid solvent extraction with mechanical grinding, followed by liquid-liquid partitioning and Florisil solid-phase extraction for the two cleanup steps. The quantification is made by liquid chromatography with electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS). Indeed, combined with an adequate sample treatment, this technique offers good sensitivity and selectivity in such a complex matrix. The method has given good recoveries of 74-104% with relative standard deviations of 5.6-18.2%.

A survey of pesticide residues in pollen loads collected by honey bees in France.

In 2002, a field survey was initiated on French apiaries to monitor weakness of honey bee, Apis mellifera L., colonies. Apiaries were evenly distributed in five sites located on continental France. Five colonies were randomly selected in each apiary, leading to a total of 125 studied honey bee colonies. For 3 yr (starting in autumn 2002), colonies were visited four times per year: after winter, before summer, during summer, and before winter. Pollen loads from traps were collected at each visit. Multiresidue analyses were performed in pollen to search residues of 36 different molecules. Specific analyses were conducted to search fipronil and metabolites and also imidacloprid and metabolites. Residues of 19 searched compounds were found in samples. Contamination by pesticides ranged from 50 to 0%. Coumaphos and tau-fluvalinate residues were the most concentrated of all residues (mean concentrations were 925.0 and 487.2 microg/kg, respectively). Fipronil and metabolite contents were superior to the limit of detection in 16 samples. Residues of fipronil were found in 10 samples. Nine samples contained the sulfone compound, and three samples contained the desulfinyl compound. Residues of imidacloprid and 6-chloronicotinic acid were found in 69% of samples. Imidacloprid contents were quantified in 11 samples with values ranging from 1.1 to 5.7 microg/kg. 6-Chloronicotinic acid content was superior to the limit of quantification in 28 samples with values ranging from 0.6 to 9.3 microg/kg. Statistical tests showed no difference between places of sampling with the exception of fipronil. Possible origins of these contaminations, concentration and toxicity of pesticides, and the possible consequences for bees are discussed.

Experimental study on the toxicity of imidacloprid given in syrup to honey bee (Apis mellifera) colonies.

Two groups of eight honey bee colonies were fed with two different concentrations of imidacloprid in saccharose syrup during summer (each colony was given 1 litre of saccharose syrup containing 0.5 microg litre(-1) or 5 microg litre(-1) of imidacloprid on 13 occasions). Their development and survival were followed in parallel with control hives (unfed or fed with saccharose syrup) until the end of the following winter. The parameters followed were: adult bee activity (number of bee entering the hive and pollen carrying activity), adult bee population level, capped brood area, frequency of parasitic and other diseases, mortality, number of frames with brood after wintering and a global score of colonies after wintering. The only parameters linked to feeding with imidacloprid-supplemented saccharose syrup when compared with feeding with non-supplemented syrup were: a statistically non-significant higher activity index of adult bees, a significantly higher frequency of pollen carrying during the feeding period and a larger number of capped brood cells. When imidacloprid was no longer applied, activity and pollen carrying were re-established at a similar level for all groups. Repeated feeding with syrup supplemented with imidacloprid did not provoke any immediate or any delayed mortality before, during or following the next winter, whereas such severe effects are described by several French bee keepers as a consequence of imidacloprid use for seed dressing in neighbouring cultures. In any case, during the whole study, mortality was very low in all groups, with no difference between imidacloprid-fed and control colonies. Further research should now address several hypotheses: the troubles described by bee keepers have causes other than imidacloprid; if such troubles are really due to this insecticide, they may only be observed either when bees consume contaminated pollen, when no other sources of food are available, in the presence of synergic factors (that still need to be identified), with some particular races of bees or when colonies are not strong and healthy.

Application of solid/liquid extraction for the gravimetric determination of lipids in royal jelly.

Gravimetric lipid determination is a major parameter for the characterization and the authentication of royal jelly quality. A solid/liquid extraction was compared to the reference method, which is based on liquid/liquid extraction. The amount of royal jelly and the time of the extraction were optimized in comparison to the reference method. Boiling/rinsing ratio and spread of royal jelly onto the extraction thimble were identified as critical parameters, resulting in good accuracy and precision for the alternative method. Comparison of reproducibility and repeatability of both methods associated with gas chromatographic analysis of the composition of the extracted lipids showed no differences between the two methods. As the intra-laboratory validation tests were comparable to the reference method, while offering rapidity and a decrease in amount of solvent used, it was concluded that the proposed method should be used with no modification of quality criteria and norms established for royal jelly characterization.

Use of differential scanning calorimetry (DSC) as a new technique for detection of adulteration in honeys. 1. Study of adulteration effect on honey thermal behavior.

Differential scanning calorimetry (DSC) was used to study the thermal behavior of authentic honeys (Lavandula, Robinia, and Fir honeys) and industrial sugar syrups. Thermal or thermochemical parameters such as the glass transition temperature (Tg), enthalpies of fusion (DeltaH(fus)), and heat capacity variation (DeltaC(p)) were measured. The syrups and honeys showed significant differences in thermal phenomena, as well as in their amplitude and position on the temperature scale. Results showed good reproducibility of the method for all samples studied. The effect of adulteration of honey with different amounts of syrup (5, 10, 20, 40, and 60%) was investigated. A linear relationship was found between the percentage of added syrup and the glass transition temperature. A similar relationship was obtained from the enthalpy of fusion results in the temperature range of 40-90 degrees C. Under applied conditions, the effects of adulteration of honeys by industrial syrups appeared to be detectable from a level as low as 5%.

An assessment of honeybee colony matrices, Apis mellifera (Hymenoptera: Apidae) to monitor pesticide presence in continental France.

The frequency of occurrence and relative concentration of 44 pesticides in apicultural (Apis mellifera) matrices collected from five French locations (24 apiaries) were assessed from 2002 to 2005. The number and nature of the pesticides investigated varied with the matrices examined-living honeybees, pollen loads, honey, and beeswax. Pollen loads and beeswax had the highest frequency of pesticide occurrence among the apiary matrices examined in the present study, whereas honey samples had the lowest. The imidacloprid group and the fipronil group were detected in sufficient amounts in all matrices to allow statistical comparisons. Some seasonal variation was shown when residues were identified in pollen loads. Given the results (highest frequency of presence) and practical aspects (easy to collect; matrix with no turnover, unlike with bees that are naturally renewed), pollen loads were the best matrix for assessing the presence of pesticide residues in the environment in our given conditions.