Effects of 2 gradual debonding strategies on machine milk yield, flow, and composition in a cow-driven cow-calf contact system.

This controlled study compared the effects of 2 different gradual debonding strategies on machine milk yield, flow, and composition in a cow-driven cow-calf contact (CCC) system with automatic milking. Cows had 24 h/d access to their calves during the first weeks of lactation. In the long debonding (LDB) treatment (n = 16), a gradual reduction of cows' access to their calves was initiated 4 wk after calving over a total period of 28 d; first to 12 h/d (14 d), and then to 6 h/d (14 d). In the short debonding (SDB) treatment (n = 14), gradual reduction was initiated 6.5 wk after calving over a total period of 10 d; first to 12 h/d (5 d), and then to 6 h/d (5 d). From 6 h/d, access was finally reduced to 0 h/d for 7 d for both treatments. Machine milk yield, somatic cell count, and peak and average milk flow were automatically registered at milking. During the 9-wk study period, composite samples were analyzed for milk composition. Data were analyzed with linear mixed effect models. Results showed that machine milk yield during 24 h/d access varied between cows (range 1.2-49.9 kg/d, average ± standard deviation 13.2 ± 7.82 kg/d). The LDB cows had a higher daily machine milk yield than SDB cows at the end of and after access reduction was completed (+5.0 ± 1.63 and +5.1 ± 1.55 kg during the last 5 d of 6 h/d access, and 0 h/d access, respectively). Somatic cell count was on a healthy level, with no difference between treatments. Milk fat content increased with reduction in access, regardless of treatment. Short debonding cows tended to show higher milk protein content and lower milk lactose content than cows with a longer debonding. This study has shown that a longer debonding initiated earlier may give a higher milk yield in the short term. The variation in machine milk yield may indicate differences in milk ejection, suckling, and visiting patterns and preferences among cows.

Calf performance in a cow-driven cow-calf contact system: Effect of 2 methods to gradually reduce cows' access to their calf.

Knowledge is lacking on separation strategies that can best prepare calves to final separation from the dam in cow-calf contact (CCC) systems. This controlled trial compared the effects of 2 different methods to gradually reduce cows' access to their calf termed "debonding" on calf growth in a cow-driven CCC system. Initially, cows (Norwegian Red breed) had 24 h/d computer-controlled access to their calves. In the long debonding (LDB) treatment (n = 16), a gradual reduction of cows' access to their calves was initiated 28 d after calving over a total duration of 28 d; first to 12 h/d (14 d), and then to 6 h/d (14 d). In the short debonding (SDB) treatment (n = 14), reduction was initiated 45 d after calving over a total duration of 10 d; first to 12 h/d (5 d), and then to 6 h/d (5 d). From 6 h/d, access was finally reduced to 0 h/d for 4 d for both treatments, resulting in a study period of 60 d in total. Calves had ad libitum access to concentrate, hay and water throughout the study. Independent of treatment, ad libitum access to whole milk from an automatic feeder was granted once cow access was reduced. Cows and calves had the possibility for fence line contact at all times. The primary outcome variable calf weight gain was registered biweekly. Calf ADG was analyzed with a linear mixed model. The ADG was similar across treatments during 24 h/d access (1.04 ± 0.07 kg). Debonding treatment affected calf growth differently with each gradual reduction in cow access (12 h/d, 6 h/d and 0 h/d); however, no main effect of treatment was detected. The SDB calves had a pattern of increased ADG with the first reduction in access (+0.39 ± 0.18kg), followed by significant growth checks as access was reduced further to 6 h/d and 0 h/d (-0.41 ± 0.20 kg and -1.15 ± 0.31 kg, respectively). The LDB calves only showed significant weight checks at the final reduction in access (0 h/d access), yet at a lower degree (-0.46 ± 0.21 kg) than SDB calves. As expected, ADG was negatively associated with health events but positively associated with intake of concentrate and supplemental milk. Collectively, the results from the present study might point toward a long adaptation to separation which is initiated at a younger age being more favorable for calf performance.

Proposed methods for estimating loss of saleable milk in a cow-calf contact system with automatic milking.

Cow-calf contact (CCC) systems, although beneficial in many respects, introduce additional challenges to collect reliable data on milk production, which is important to assess individual cow efficiency and dairy farm profitability. Apart from weighing calves before and after each feeding, the amount of saleable milk lost due to calf suckling is practically impossible to measure. Here, we assess 2 indirect methods for estimating loss of saleable milk when housing cows and calves together in a robotic milking unit. In our study, treatment (CCC) cows and calves were kept together full time until the calves were 127 ± 6.6 d old (mean ± SD). Control cows were separated from their calves within 12 h of birth and then kept in the same unit as the treatment cows but with no access to either their own or treatment calves. Milk yield recording of both groups was performed from calving until pasture release at 233 ± 20 d in milk. The first estimation method relied on observed postseparation milk yield data, which were fed into a modified Wilmink regression model to determine the best-fitting lactation curve for the preseparation period. The second method was based on the cows' daily energy intake postseparation, calculated by measuring the daily feed intake and analyzing the energy content of the ration. The calculated energy intake was used to determine the average ratio between energy intake and the observed milk yield the following day for each individual cow, assuming constant rates of mobilization and deposition of body fat. The obtained ratio was then used to calculate the expected daily milk yield based on daily energy intake data during the preseparation period. In this paper, we analyzed data from 17 CCC cows kept together with their calves and 16 control cows; both groups calved from September to October 2020 and were followed up until release to pasture in May 2021. Saleable milk yield was lower in CCC cows than in control cows, both before and after separation. The 2 methods were used on data for control cows and showed milk yield loss using the lactation curve method (average of -3.4 ± 2.8 kg/d) and almost no loss using energy intake data (average of -1.4 ± 2.7 kg/d). Milk yield loss for CCC cows was estimated at average 11.3 ± 4.8 and 7.3 ± 6.6 kg milk/d, respectively. The proposed lactation curve estimation method tends to overestimate milk yield loss, whereas the method based on energy intake is more accurate. However, collecting detailed energy intake data per individual cow requires additional effort and equipment, which is not always feasible on commercial farms. Further research is needed to improve milk loss estimation and to better understand trade-offs in CCC systems.

Cyberlindnera jadinii yeast as a protein source in early- to mid-lactation dairy cow diets: Effects on feed intake, ruminal fermentation, and milk production.

We examined the effects of substituting soybean meal with either yeast protein from Cyberlindnera jadinii or barley in concentrate feeds on feed intake, ruminal fermentation products, milk production, and milk composition in Norwegian Red (NRF) dairy cows. The concentrate feeds were prepared in pellet form as soy-based (SBM; where soybean meal is included as a protein ingredient), yeast-based (YEA; soybean meal replaced with yeast protein), or barley-based (BAR; soybean meal replaced with barley). The SBM contained 7.0% soybean meal on a dry matter (DM) basis. This was replaced with yeast protein and barley in the YEA and BAR concentrate feeds, respectively. A total of 48 early- to mid-lactation [days in milk ± standard deviation (SD): 103 ± 33.5 d] NRF cows in their first to fourth parity and with initial milk yield of 32.6 kg (SD = 7.7) were allocated into 3 groups, using a randomized block design, after feeding a common diet [SBM and good-quality grass silage: crude protein (CP) and neutral detergent fiber (NDF) content of 181 and 532 g/kg of DM, respectively] for 14 d (i.e., covariate period). The groups (n = 16) were then fed one of the dietary treatments (SBM, YEA, or BAR) for a period of 56 d (i.e., experimental period). The concentrate feeds were offered in split portions from 3 automatic feeders using electronic identification, with ad libitum access to the same grass silage. Dietary treatments had no effect on daily silage intake, total DM intake, or total NDF intake. Dietary CP intake was lower and starch intake was higher in the BAR group compared with the other groups. Ruminal fluid pH, short-chain volatile fatty acid (VFA) concentrations, acetate-to-propionate ratio, and non-glucogenic to glucogenic VFA ratio were not affected by dietary treatments. No effects of the dietary treatments were observed on body weight change, body condition score change, milk yield, energy-corrected milk yield, milk lactose and fat percentages, or their yields. In conclusion, yeast protein can substitute conventional soybean meal in dairy cow diets without adverse effect on milk production and milk composition, given free access to good-quality grass silage.

Investigating cow-calf contact in a cow-driven system: performance of cow and calf.

In this research communication we describe the performance of dairy cow-calf pairs in two cow-driven CCC-systems differing in cows' access to the calves through computer-controlled access gates (smart gates, SG). We investigated cows' machine milk yield in the automatic milking system (AMS), calf growth, and intake of supplemental milk and concentrate. Two groups each with four cow-calf pairs were housed in a system with a cow area, a calf creep and a meeting area. SG's controlled cow traffic between the meeting area and the cow area where cows could obtain feed, cubicles and the AMS. Calves had ad libitum access to supplemental milk and concentrate. During the suckling phase of 31 d, cow access to the meeting area was free 24 h/d (group 1) or restricted (group 2) based on milking permission. Following the suckling phase, cow access was gradually decreased over 9 d (separation phase). During the suckling phase, cows' machine milk yield (mean ± sd) in the AMS was 11.4 ± 6.38 kg/d. In the separation phase, the yield increased to 25.0 ± 10.37 kg/d. Calf average daily gain (ADG) was high during the suckling phase: 1.2 ± 0.74 kg. During the separation phase, ADG decreased to 0.4 ± 0.72 kg which may be related to a low intake of supplemental milk. Calves' concentrate intake increased with age, and all calves consumed >1 kg/d after separation. We conclude that cows nurse the calf in a cow-directed CCC system well resulting in high ADG, and AMS milk yields were, at least, partially maintained during the suckling phase. Although the AMS yields increased in response to separation, calf ADG was decreased. A low sample size limits interpretation beyond description but provides a basis for hypotheses regarding future research into CCC-systems.

Investigating cow-calf contact in cow-driven systems: behaviour of the dairy cow and calf.

Research is needed on how technology can facilitate cow-calf contact (CCC). This research communication describes the behaviour of dairy cow-calf pairs in two cow-driven CCC-systems differing in cows' access to the calves through computer-controlled access gates (smart gates, SG). Specifically, cow traffic through SG when visiting their calves, allogrooming, suckling and cross-suckling, cows' eating and resting behaviour and finally vocal response to separation were assessed. After 3 d in an individual calving pen, pairs (n = 8) were moved to the CCC compartment with a cow area, a calf creep and a meeting area. During the next 31 d calves could suckle the cows whenever they visited the meeting area (suckling phase). Cows had free (group 1, n = 4 pairs) or restricted access to the calves based on previous activity in the automatic milking system (group 2, n = 4 pairs). SG's controlled cow traffic between the meeting area and the cow area, in which the cows could access resources such as feed, cubicles, and the automatic milking system. Following the suckling phase cow access into the meeting area was gradually decreased over 9 d (separation phase). During the suckling phase, cows paid frequent and short visits to their calves. Pairs spent in total approximately one h/d suckling and allogrooming. However, the duration and frequencies of these events varied among pairs and groups, as did the vocal response to separation. Restricted access - cows performed more (unrewarded) attempts to visit the calves who cross-suckled more. Collectively, free access to the calves may have been more intuitive and welfare friendly. Although a low sample size limits interpretation beyond description and enabling hypothesis formulation for future research, the results indicate that the cow is motivated to visit her calf, albeit through a SG, thus facilitating particular behaviours for which cow-calf pairs are highly motivated.

Methodology for studying human attitudes and behaviour to cow-calf contact systems.

This position paper describes a common stand on methodology of human attitudes and behaviour that is suitable to use in studies regarding cow-calf contact (CCC) in dairy production, in order to create a common knowledge base and foundation for future recommendations of CCC systems. We describe how different quantitative and qualitative methods can be used to study human attitudes to CCC as well as farmer or consumer behaviour. We aim to contribute to a better understanding of the available methods, and hope that this paper can be used as a guideline for future studies in this area.

Fourier transform infrared spectroscopy of milk samples as a tool to estimate energy balance, energy- and dry matter intake in lactating dairy cows.

The objective of the study was to evaluate the potential of Fourier transform infrared spectroscopy (FTIR) analysis of milk samples to predict body energy status and related traits (energy balance (EB), dry matter intake (DMI) and efficient energy intake (EEI)) in lactating dairy cows. The data included 2371 milk samples from 63 Norwegian Red dairy cows collected during the first 105 days in milk (DIM). To predict the body energy status traits, calibration models were developed using Partial Least Squares Regression (PLSR). Calibration models were established using split-sample (leave-one cow-out) cross-validation approach and validated using an external test set. The PLSR method was implemented using just the FTIR spectra or using the FTIR together with milk yield (MY) or concentrate intake (CONCTR) as predictors of traits. Analyses were conducted for the entire first 105 DIM and separately for the two lactation periods: 5 ≤ DIM ≤ 55 and 55 < DIM ≤ 105. To test the models, an external validation using an independent test set was performed. Predictions depending on the parity (1st, 2nd and 3rd-to 6th parities) in early lactation were also investigated. Accuracy of prediction (r) for both cross-validation and external test set was defined as the correlation between the predicted and observed values for body energy status traits. Analyzing FTIR in combination with MY by PLSR, resulted in relatively high r-values to estimate EB (r = 0.63), DMI (r = 0.83), EEI (r = 0.84) using an external validation. Only moderate correlations between FTIR spectra and traits like EB, EEI and dry matter intake (DMI) have so far been published. Our hypothesis was that improvements in the FTIR predictions of EB, EEI and DMI can be obtained by (1) stratification into different stages of lactations and different parities, or (2) by adding additional information on milking and feeding traits. Stratification of the lactation stages improved predictions compared with the analyses including all data 5 ≤ DIM ≤105. The accuracy was improved if additional data (MY or CONCTR) were included in the prediction model. Furthermore, stratification into parity groups, improved the predictions of body energy status. Our results show that FTIR spectral data combined with MY or CONCTR can be used to obtain improved estimation of body energy status compared to only using the FTIR spectra in Norwegian Red dairy cattle. The best prediction results were achieved using FTIR spectra together with MY for early lactation. The results obtained in the study suggest that the modeling approach used in this paper can be considered as a viable method for predicting an individual cow's energy status.

Methodology for experimental and observational animal studies in cow-calf contact systems.

In this Research Reflection we describe a common standpoint on suitable methodology for controlled and observational studies in cow-calf contact systems in dairy production. Different methods to assess behaviour, health and production in cow-calf contact systems are outlined. Knowledge and experience from researchers working in this field supplement scientific literature whenever relevant. Specific methods including study design, early behaviour of cow and calf, social behaviour relevant to cow-calf contact systems, human-animal relationships and aspects related to management (milking, weaning and separation, health) are reviewed, and recommendations formed. We expect that this paper can contribute to a better understanding of the complexity of cow-calf contact systems and help to advance research in this area of dairy production.

Methodological terminology and definitions for research and discussion of cow-calf contact systems.

Due to increasing public concern regarding separation of the dairy cow and calf within the first days after birth, alternative systems, where cows and calves stay in contact for an extended period, are receiving increasing interest from a broad array of researchers and other stakeholders. With more research in the area, there is a risk of inconsistencies emerging in the use of terminology. To create a better consensus in further discussions, the aim of this Research Reflection is to provide definitions and propose a common terminology for cow-calf contact in dairy production. We also suggest definitions for various systems allowing cow-calf contact and describe the distinct phases of cow-calf contact systems.

Increased take-off level in automatic milking systems - effects on milk flow, milk yield and milking efficiency at the quarter level.

This research communication describes how different detachment levels (0.48, 0.3 and 0.06 kg milk/min) at the quarter-level affect milk flow profiles and overall milking efficiency in automatic milking systems. We hypothesized a higher detachment level would result in greater mean flow rates without affecting the volume of harvested milk per cow during 24 h compared to lower detachment levels. The data suggest milk flow decreased to a rate below the overmilking limit within the 6-s delay time required for termination in all treatments, but the duration of overmilking was shorter for the greatest detachment level compared to the other treatments. We conclude that setting a detachment level at a greater milk flow rate reduces the duration of overmilking without affecting the amount of milk harvested when applied to cows in mid-lactation during quarter-level milking. We also suggest that the steepness of the decline phase of the milk flow curve might have a larger effect than the actual detachment level on the duration of overmilking.

Effect of increased milking frequency and residual milk removal on milk production and milk fatty acid composition in lactating cows.

It has been well established that milk yield is affected both by milking frequency and due to the removal of residual milk, but the influence of a combination of these factors is unclear. In this study, four mid-lactation cows were used in a 4 × 4 Latin square design to test the hypothesis that the effects of more frequent milking and residual milk removal on milk yield and composition are additive and alter milk fatty acid composition. Treatments comprised two or four times daily milking in combination with (or without) residual milk removal over a 96 h interval preceded by a 2 d pretreatment period and followed by a 8 d washout in each 14 d experimental period. Milk was sampled at each milking for the analysis of gross composition and SCC. Samples of available and residual milk collected on the last milking during each treatment period were collected and submitted for fatty acid composition analysis. Increases in milking frequency and residual milk removal alone or in combination had no effect on milk yield or on the secretion of lactose and protein in milk. However, residual milk removal during more frequent milking increased milk fat yield. Milking treatments had no major influence on the fatty acid composition of available milk, but resulted in rather small changes in the relative abundance of specific fatty acids, with no evidence that the additive effects of treatments were due to higher utilisation of preformed fatty acids relative to fatty acid synthesis de novo. For all treatments, fat composition of available and residual milk was rather similar indicating a highly uniform fatty acid composition of milk fat within the mammary gland.

Effects of automatic cluster removal and feeding during milking on milking efficiency, milk yield and milk fat quality.

In order to increase milking efficiency, the effects of two different cluster take-off levels (200 and 800 g/min) and feeding vs. not feeding during milking were tested in a Latin square design study including 32 cows. Milk yield, milking time, milk flow and milking interval were measured and milk samples were analysed for gross composition, sodium and potassium concentration, free fatty acid (FFA) content, milk fat globule (MFG) size, MFG membrane (MFGM) material and fatty acid composition. Residual milk was harvested to evaluate udder emptying. Increasing the take-off level from 200 to 800 g/min at the whole udder level decreased milking time and increased harvest flow. Udder emptying decreased slightly, but there were no effects on milk yield, FFA content or MFGM. There were interactive effects of take-off level and feeding during milking on content of fatty acids C4:0, C6:0, C16:0, C18:3(n-3) and C20:0. Feeding during milking increased milk yield per day and decreased milking interval. Sodium and potassium concentrations in milk were unaffected by treatments, indicating no loss of tight junction integrity. From these results, it is clear that feeding during milking should be used to increase milk yield and improve milking efficiency, regardless of take-off level used, and that the effect of feeding is more pronounced when a low take-off level is used. Feeding seemed to counteract the effects of the low take-off level on milking time and milking interval. Low take-off levels can therefore be used in combination with feeding.

The effect of pulsation ratio on teat condition, milk somatic cell count and productivity in dairy cows in automatic milking.

The pulsation ratio of a milking machine affects milk flow and milking time, and has also been reported to influence teat condition and milk somatic cell count (SCC). However, most studies comparing pulsation ratios have been performed on conventional cluster milking (whole-udder level), where effects such as deteriorated teat end condition and increased milk SCC are likely to be caused by over-milking on teats that are emptied faster than the other teats. When the teat cups are detached from each udder quarter separately which can be done in automatic milking systems (AMS), the risk of over-milking, especially in front teats, may be significantly reduced. This study investigated the effects of pulsation ratio on teat end condition, milk SCC, milk yield, milking time and milk flow in an automatic milking system where each udder quarter is milked separately. In total, 356 cows on five commercial farms were included in a split-udder design experiment comparing three pulsation ratios (60:40, 70:30 and 75:25) with the standard pulsation ratio (65:35) during 6 weeks. Pulsation rate was 60 cycles/min and vacuum level 46 kPa. The 70:30 and 75:25 ratios increased peak and average milk flow and the machine-on time was shorter with 75:25, while both peak and average milk flows were lower and machine-on time was longer with the 60:40 ratio. No negative effects on teat condition or milk SCC were observed with any of the pulsation ratios applied during the study. Thus it is possible that increased pulsation ratio can be used to increase milking efficiency in AMS where quarter milking is applied.

Comparing the effects of contact duration on cow and calf performance beyond separation - a prospective cohort study.

BACKGROUND: Consumers, the industry, and many farmers have shown increased interest in alternative management systems that allow for cow-calf contact (CCC) and this topic has become an important focus of research for a sustainable dairy industry. Among the many knowledge gaps still existing in this novel research field, there is a need for further research to investigate effects of CCC beyond the nursing period (i.e., after cow-calf separation). Moreover, multi-herd observational studies are scarce. Therefore, the aim of this study was to investigate the within-herd effect of CCC on machine milk yield and calf growth beyond separation. In this prospective cohort study, we studied all cows and their calves (Norwegian Red breed) born between September 1st 2021 and January 31th 2022 at three Norwegian dairy farms, investigating the impact of CCC on machine milk yield and calf average daily gain (ADG) after separation of the cow-calf pair. The follow-up period was 305 d for cows and six months for calves. Machine milk yield was automatically registered at each milking and calf heart girth was measured once a month. As various contact durations emerged, they were categorized into three groups: no contact (NC 0-3 d), short duration (4-30 d) and long duration (> 30 d). Data were analyzed with linear mixed models with the individual animal as the unit of interest. For cows, days in milk (DIM) from date of separation up to 305 DIM were included in the analysis as a continuous variable. For calves, age up to 195 d was used in the statistical analysis. RESULTS: We found no differences in machine milk yield after separation across the different contact groups: cows with no contact (n = 28), short duration (n = 51) and long duration (n = 27) of contact, all exhibited comparable milk yields from the time of separation until the end of lactation. Furthermore, in the case of calves, no disparities in average daily gain (ADG) were identified for any of the contact groups: calves with no contact (n = 39), short duration (n = 61) and long duration (n = 38) of contact, displayed comparable growth during the first six months of life. CONCLUSIONS: Our findings indicate no negative effects of CCC on machine milk yield after separation, nor any sustained effects on calf growth under the conditions of this study. More multi-herd observational studies conducted on-farm is needed to expand the understanding of effects of CCC on cow and calf performance after separation.

Effects of achromatic and chromatic lights on pupillary response, endocrinology, activity, and milk production in dairy cows.

Artificial light can be used as a management tool to increase milk yield in dairy production. However, little is known about how cows respond to the spectral composition of light. The aim of this study was to investigate how dairy cows respond to artificial achromatic and chromatic lights. A tie-stall barn equipped with light-emitting diode (LED) light fixtures was used to create the controlled experimental light environments. Two experiments were conducted, both using dairy cows of Swedish Red and light mixtures with red, blue or white light. In experiment I, the response to light of increasing intensity on pupil size was evaluated in five pregnant non-lactating cows. In experiment II 16h of achromatic and chromatic daylight in combination with dim, achromatic night light, was tested on pregnant lactating cows during five weeks to observe long term effects on milk production, activity and circadian rhythms. Particular focus was given to possible carry over effects of blue light during the day on activity at night since this has been demonstrated in humans. Increasing intensity of white and blue light affected pupil size (P<0.001), but there was no effect on pupil size with increased intensity of red light. Milk yield was maintained throughout experiment II, and plasma melatonin was higher during dim night light than in daylight for all treatments (P<0.001). In conclusion, our results show that LED fixtures emitting red light driving the ipRGCs indirectly via ML-cones, blue light stimulating both S-cones and ipRGCs directly and a mixture of wavelengths (white light) exert similar effects on milk yield and activity in tied-up dairy cows. This suggests that the spectral composition of LED lighting in a barn is secondary to duration and intensity.