Joint Theoretical and Experimental Study on the La Doping Process in In2O3: Phase Transition and Electrocatalytic Activity.

In2O3 and La3+-doped In2O3 nanostructures were synthesized through a facile and fast chemical route based on the microwave-assisted hydrothermal method combined with rapid thermal treatment in a microwave oven. The presence of the La3+ doping process modifies the size and morphology of the In2O3 nanostructures and also stabilizes the rhombohedral (rh) In2O3 phase with respect to the most stable cubic (bcc) polymorph. X-ray diffraction (XRD) patterns and Rietveld refinements, Raman, UV-vis, and energy dispersive X-ray (EDX) spectroscopies, transmission electron (TEM) and field-emission scanning electron (FE-SEM) microscopies, as well as PL emissions have been performed. To complement and rationalize the experimental results, first-principle calculations, based on density functional theory, are carried out to obtain the formation energies of the In2O3 and bcc- and rh-In2O3-doped phases, their geometry and electronic properties. Theoretical results are able to explain the relative stabilization of the rh-phase with respect to the bcc-phase based on the analysis geometry changes and the electronic redistribution induced by the La3+ doping process. In addition, Wulff construction is employed to match the theoretical and experimental morphologies of the cubic phase. The synthesized samples were applied for the O2 evolution reaction (OER). The La3+-doped In2O3 film presents superior electrocatalytic activity, with an onset potential lower than the undoped In2O3 film that can be associated with the increase in electron density caused by the La3+ doping process. This study provides a versatile strategy for obtaining In2O3 and La3+-doped In2O3 nanostructures for practical applications.

Effect of Mercaptosuccinic Acid Stabilizer Agent on the Optical Properties of Colloidal CdTe Quantum Dots.

In the present work, we report on the positive effect of mercaptosuccinic acid (MSA) stabilizer agent on the optical features of colloidal CdTe quantum dots (QDs). With this aim, we performed some spectroscopic measurements such as steady-state absorption and fluorescence, fluorescence quantum yield and time-resolved photoluminescence for five MSA-capped CdTe QD samples with different synthesis times. The first general aspect to highlight is that the QDs' average size increased with synthesis time (from 30 to 150 min) while the size dispersion decreased due to the Ostwald ripening mechanism. Second, comparing the optical properties of CdTe QDs obtained from the same synthesis route, we show that MSA stabilizer agent enhanced the optical properties of CdTe QDs as compared with other widely used stabilizer agents such as GSH and TGA. We ascribe this outcome to reduction of the number of surface defects of the CdTe QDs because the MSA stabilizer agent decreases the growth rate of nanocrystals, causing an improvement in their surface quality. In the light of Fermi's golden rule, we observed that for longer synthesis time the optical properties of CdTe QDs increases due to the enhancement of the direct radiative recombination rate of electrons and holes and decrease in the decay rate for core states. Finally, we investigated the pH-dependent fluorescence and demonstrated the similar behaviour in acidic range between MSA-capped CdTe and mercaptocarboxylates-capped CdTe.

Broadband NIR emission in sol-gel Er(3+)-activated SiO2-Ta2O5 glass ceramic planar and channel waveguides for optical application.

An Er(3+)-doped SiO2:Ta2O5 optical channel waveguide and nanocomposite were prepared by the sol-gel route at a Si:Ta 50:50 molar ratio. Channels with an excellent surface profile were easily and quickly fabricated by focusing a femtosecond laser onto the surface of multilayered films deposited on SiO2/Si substrates. In parallel, the same sol used to prepare the film was annealed at 900, 1000, and 1100 degrees C for 2 h, to get the nanocomposite materials. A broadband NIR emission around 1538 nm, assigned to the 4I13/2 --> 4I15/2 transition of the Er3+ ions was observed in the nanocomposites of amorphous SiO2 containing dispersed Ta2O5 nanocrystals. The 4I13/2 lifetime and emission bandwidth depend on the annealing temperature. In conclusion, Er(3+)-doped SiO2:Ta2O5 channel waveguides and nanocomposites are promising materials for photonic applications.

[Rationale for fabrication of combination dentures]. / Rationalisation de la réalisation des prothèses composites.

The complexity of this type of restoration comes from the numerous clinical and laboratory steps required. Achievement of these prosthodontic restoration is based on a careful clinical examination, models mounted on an articulator, in centered relation and adequate vertical dimension. The models allow the surveyor examination, the teeth set up and/or wax up. Duplication of the teeth set up in acrylic will reduce the number of patient's appointments, and thus, the potential errors will be minimized. This acrylic teeth set up (A.T.S.) will allow: to keep the decided occlusal relationships; to visualize the teeth grinding to be made; to guide the tooth preparation; to take the abutment impression, in occlusion. Therefore: the final model; the vertical dimension; occlusal relationship; the aesthetic; and, the removable partial denture design will be available for the dental technician. Furthermore, in close to full denture cases (class I and large class IV), the A.T.S. can be used to take the impression, to achieve the framework, and to transfer the occlusal registration.