Panlobular emphysema is associated with COPD disease severity: A study of emphysema subtype by computed tomography.

BACKGROUND: Computed tomography has the potential to inform COPD prognosis. We sought to determine associations of emphysema phenotype with clinical parameters including lung function, inflammatory markers, and quality of life. METHODS: Participants of this single-center observational cohort (n = 83) were 40-80 years old, had ≥10 pack-year smoking, and a diagnosis of COPD confirmed by spirometry. All participants had available historic chest CT scans which were systematically reviewed by a single expert radiologist and scored for emphysema subtype, extent, and distribution. Associations between radiographic findings and clinical parameters were determined. RESULTS: Median age of participants was 72 years, median smoking 40 pack-years, and median FEV1 59% predicted. 84% of the participants had radiographic emphysema. Of those, 26% had panlobular emphysema (PLE), 68% centrilobular emphysema (CLE), and 6% paraseptal emphysema (PSE). As compared to the participants with no radiographic emphysema, the presence of PLE-dominant emphysema was associated with a lower BMI (P = 0.012) and greater extent of emphysema (P = 0.014). After adjusting for age, sex, and pack-years smoking history, PLE was associated with greater airflow obstruction by FEV1% (48% vs 71%, P = 0.005), greater symptom burden by CAT score (18 vs 9, P = 0.015), worse quality of life by SGRQ score (43 vs 22, P = 0.025), and more systemic inflammation by erythrocyte sedimentation rate (P = 0.001). CLE- or PSE-dominant emphysema were not similarly associated with clinical features or symptom burden. CONCLUSIONS: The presence of PLE-dominant emphysema was associated with greater extent of emphysema, greater airflow obstruction, increased respiratory symptoms, worse quality of life, and systemic inflammation. Further investigation is indicated to explore the pathogenesis of the PLE phenotype and the prognostic and treatment implications of PLE.

Comparison of radiographic absorptiometry with dual-energy x-ray absorptiometry and quantitative computed tomography in normal older white and black women.

Bone mineral density (BMD) of the phalanges of the hand was measured by the technique of radiographic absorptiometry (RA) in 199 older postmenopausal women previously determined to have normal BMD by dual-energy x-ray absorptiometry (DXA) and quantitative computed tomography (QCT). The average age of the women was 66.8 +/- 4.9 years, and they were 19.9 +/- 6.7 years postmenopause. In the 54 black women, phalangeal BMD was 11.7% greater than in the 145 white women, a difference comparable to that found using DXA at the radial midshaft, the lumbar spine, and femoral neck. A correlation matrix comparing BMD measured by RA to BMD measured by DXA and QCT indicates that, in general, RA was related to the various DXA and QCT measurement sites as well as these sites were related to each other. When results for RA, DXA, and QCT obtained in our cohort of older women were compared to available reference data for peak adult bone mass, the average difference (SD units) from peak value was greatest for RA (-1.77 radius, -1.24 spine, -2.13 femoral neck, -2.34 QCT spine, and -2.71 phalanges). We conclude that RA is an acceptable measure of phalangeal BMD and that the data in our cohort can serve as reference data for older white and black women aged 55-75 years. Once the ability of RA to predict future fracture occurrence has been demonstrated, it could be rapidly deployed as a low-cost, widely available bone mass measurement technique.

Reference data for bone mass, calciotropic hormones, and biochemical markers of bone remodeling in older (55-75) postmenopausal white and black women.

From a random sample of our institution's health maintenance organization (HMO), we recruited 250 white women and 112 black women, aged 55-75, all of whom were 10 or more years postmenospause with minimal estrogen exposure and free of osteoporosis, other metabolic bone disease, and medical, surgical, or therapeutic situations that may influence bone loss. Bone mass was measured in the radius, spine, and femur by DXA and in L1 by QCT. Serum samples were analyzed for parathyroid hormone, calcidiol, calcitriol, osteocalcin, and bone alkaline phosphatase and urine samples analyzed for creatinine, calcium, and hydroxyproline. Mean Z score, based on published reference data for forearm and femoral neck BMD in the white women, was not significantly different from zero, but mean Z score at the lumbar spine was 0.6 (p < 0.001), 17.2% of the individual values being > 2.0. In normal white women (BMI < 27.3, n = 143), Z score was still > 2.0 in 10.3%, suggesting that the upper bound of the published reference interval may be too low. After adjustment for body mass index, BMD was greater in the forearm (9.8%), spine (8.7%), and femoral neck (14.7%) in black women (p < 0.001 at all sites). At L1, adjusted BMC in the black women was 37.4% greater than in the white women (p < 0.001). Serum calcidiol was significantly lower and serum PTH and calcitriol significantly higher in the black women. Despite this, biochemical markers of bone resorption and formation were significantly lower in the black women. We conclude that skeletally healthy older black women have a greater bone mass and lower rates of bone remodeling than a comparable group of white women. These data can serve as reference intervals for the variables measured.

Bacteriologic findings associated with chronic bacterial maxillary sinusitis in adults.

An open-label, multicenter study was performed to assess bacteriologic findings associated with chronic bacterial maxillary sinusitis in adults. Seventy aerobic (52.2%) and 64 anaerobic (47.8%) pathogens were recovered from clinically evaluable patients at baseline (before therapy). The most commonly isolated anaerobes were Prevotella species (31.1%), anaerobic streptococci (21.9%), and Fusobacterium species (15.6%). The aerobes most frequently recovered included Streptococcus species (21.4%), Haemophilus influenzae (15.7%), Pseudomonas aeruginosa (15.7%), and Staphylococcus aureus and Moraxella catarrhalis (10.0% each). Recurrences of signs or symptoms of bacterial maxillary sinusitis associated with anaerobes were twice as frequent as were those associated with aerobes when counts of anaerobes were > or =10(3) cfu/mL. A pathogenic role for Granulicatella species in cases of chronic sinusitis was documented for the first time.

Desmopressin in the management of nocturnal enuresis in children: a double-blind study.

Desmopressin (1-desamino-[8-D-Arg]-vasopressin) (DDAVP) was given by nose drops to 22 children with persistent nocturnal enuresis (mean age, 6.6 +/- 2.9 years; range, 4 to 12 years) the evening before sleep. With saline alone as placebo and with comparison to enuretic frequency before the onset of the trial, fortnightly periods were compared under double-blind conditions with the children at home. Pretreatment and placebo fortnights showed wetting frequencies (nights per fortnight) of 10.6 +/- 4.9 and 11.0 +/- 4.4, respectively. The value of the fortnight during desmopressin therapy was 4.2 +/- 4.5, which was significantly different from either of the previous means (P less than .01). Of the 22 subjects, four failed to react to therapy at all. There was decreased enuretic frequency in the remaining 18, of whom 12 decreased markedly or ceased wetting. One month after the trial, seven of the respondents were dry with desmopressin therapy. There was clear evidence of a large nocturnal volume of dilute urine before treatment in six of the respondents in whom such measurements could be reliably made. These children responded to dehydration with urine concentration, however, so that the suggestion can be made that a failure to develop a normal diurnal pattern of urine volume and concentration may underly some cases of enuresis.

Experimental comparison of noise and resolution for 2k and 4k storage phosphor radiography systems.

The purpose of this study was to compare the image quality for a digital storage phosphor system using 1760 x 2140 (2k) and 3520 x 4280 (4k) image arrays. Measurements were made on a chest radiography system (Fuji FCR-9501) with special provisions to be operated in both 2k (standard) and 4k (HQ) modes. Presampled modulation transfer functions (MTF) were measured using an edge method. Noise power spectra (NPS) were determined for different input exposures by two-dimensional Fourier analysis. These measures along with exposure measurements and an x-ray spectral model were used to determine the frequency-dependent detective quantum efficiency DQE (f) of the system for the 4k and the 2k modes. The magnitude of the NPS for the 4k mode was about 1/2 that of the 2k mode. A MTF value of 0.5 was found at 1.25 cycles/mm for the 4k system and 1.50 cycles/mm for the 2k system. The 4k images had an extended MTF of 0.1 at 4.5 cycles/mm in the plate-scan direction. Overall, the DQE (f) of the 4k mode was slightly better than that for the 2k mode by about 0.02 due primarily to its better noise characteristics.

A method for measuring the presampled MTF of digital radiographic systems using an edge test device.

The modulation transfer function (MTF) of radiographic systems is frequently evaluated by measuring the system's line spread function (LSF) using narrow slits. The slit method requires precise fabrication and alignment of a slit and high radiation exposure. An alternative method for determining the MTF uses a sharp, attenuating edge device. We have constructed an edge device from a 250-microm-thick lead foil laminated between two thin slabs of acrylic. The device is placed near the detector and aligned with the aid of a laser beam and a holder such that a polished edge is parallel to the x-ray beam. A digital image of the edge is processed to obtain the presampled MTF. The image processing includes automated determination of the edge angle, reprojection, sub-binning, smoothing of the edge spread function (ESF), and spectral estimation. This edge method has been compared to the slit method using measurements on standard and high-resolution imaging plates of a digital storage phosphor (DSP) radiography system. The experimental results for both methods agree with a mean MTF difference of 0.008. The edge method provides a convenient measurement of the presampled MTF for digital radiographic systems with good response at low frequencies.

A technique for measuring regional bone mineral density in human lumbar vertebral bodies.

A method for measuring the regional bone mineral density (rBMD) in human lumbar vertebral bodies using a series of contiguous computed tomography images, each 1 mm thick, is fully described. The technique has a sample volume of 0.004 cm3, a sample spacing of 0.8 X 0.8 X 1.0 mm, and results in a bone marrow radiation dose of 1.59 to 2.75 rads (0.016-0.028 Gy). The use of physical density (mg/cm3) is introduced and the measurement noise (0.7-1.3%), accuracy (2.7%), and serial precision (0.2%) have been evaluated in vitro using appropriate phantoms. The corresponding percentage errors for accuracy and precision relative to K2HPO4 concentration were 6.9% and 2.0%, respectively. A multiple region density measurement is described and evaluated.

Performance evaluation of computed radiography systems.

Recommended methods to test the performance of computed radiography (CR) digital radiographic systems have been recently developed by the AAPM Task Group No. 10. Included are tests for dark noise, uniformity, exposure response, laser beam function, spatial resolution, low-contrast resolution, spatial accuracy, erasure thoroughness, and throughput. The recommendations may be used for acceptance testing of new CR devices as well as routine performance evaluation checks of devices in clinical use. The purpose of this short communication is to provide a tabular summary of the tests recommended by the AAPM Task Group, delineate the technical aspects of the tests, suggest quantitative measures of the performance results, and recommend uniform quantitative criteria for the satisfactory performance of CR devices. The applicability of the acceptance criteria is verified by tests performed on CR systems in clinical use at five different institutions. This paper further clarifies the recommendations with respect to the beam filtration to be used for exposure calibration of the system, and the calibration of automatic exposure control systems.

Static and fatigue failure properties of thoracic and lumbar vertebral bodies and their relation to regional density.

This study investigated (1) whether a characterization of the macroscopic architecture within the vertebral centrum would improve predictions of vertebral strength, (2) if regions in the centrum where least bone loss with age occurs are more predictive of vertebral strength, and (3) whether different patterns of the macroscopic architecture are predictive of static as compared to fatigue strength. To characterize the vertebral macroscopic architecture, a regional bone mineral density (rBMD) technique was used that estimated the cancellous density distribution (in 18 specific regions of the vertebral centrum) for vertebrae T7-L4, from spines of 20 female cadavers. Static and fatigue failure properties of whole vertebrae were obtained, and predictive models of static and fatigue failure properties of whole vertebrae were examined. We found that (1) vertebral failure properties were better predicted by combinations of vertebral regional cancellous density (multiple linear regressions) rather than by any individual region of cancellous density alone (simple linear regressions); (2) models using regions of density that demonstrated minimum decline with age [from the data of Flynn and Cody (Calcif. Tissue Int. 53, S170-S175 (1993))] resulted in better correlations with ex vivo vertebral static failure properties than models using density regions that showed maximum decline with age, and (3) static and fatigue characteristics required different density regions to reach significance. (A comparison of models predictive of static and fatigue failure properties revealed that anterior density regions were most often included in predictive models of the static properties while posterior regions were more predictive of the fatigue properties).(ABSTRACT TRUNCATED AT 250 WORDS)

Periodontal microbiota of mobile and non-mobile teeth.

The mechanism of accelerated periodontal destruction around teeth with occlusal trauma and increased mobility remains unclear. One possibility is that tooth mobility creates a subgingival environment conducive to overgrowth by periodontal pathogens. This study compared the subgingival microflora in mobile and non-mobile teeth of 35 adults on supportive maintenance therapy and 15 with untreated adult periodontitis. In each subject, subgingival paper-point samples were obtained from a mobile tooth with a probing depth of 4 mm or greater and from a non-mobile tooth with similar probing depth and gingival index. Samples were transported in VMGA III medium. Pockets around mobile teeth harbored significantly higher proportions of Campylobacter rectus (P = 0.001) and Peptostreptococcus micros (P = 0.05) than pockets with non-mobile teeth. Mobile teeth also tended to show elevated levels of Porphyromonas gingivalis, but this did not reach statistical significance. This study suggests that tooth mobility may constitute a risk for periodontal breakdown due to an increased subgingival occurrence of specific periodontopathogens. This hypothesis needs to be verified in longitudinal clinical and microbiological studies.

Oral food consumption and subgingival microorganisms: subgingival microbiota of gastrostomy tube-fed children and healthy controls.

This study examined the effect of oral food consumption on the prevalence and levels of subgingival bacteria and yeasts in 20 gastrostomy tube-fed children and 24 healthy controls. Microbial identification was carried out using anaerobic culture and 16S rRNA-based PCR identification methods. Streptococcal and Actinomyces species were recovered from 100% and 76% of all subjects and averaged 66% and 11% of total cultivable organisms, respectively. In decreasing order of prevalence, Fusobacterium, enteric rods, Prevotella intermedia/Prevotella nigrescens, Capnocytophaga, Propionibacterium, yeasts, Actinobacillus actinomycetemcomitans, coagulase-negative Staphylococcus, Campylobacter rectus, Bacteroides forsythus, and Porphyromonas gingivalis were detected in 48% to 2% of the study subjects. The cultivable levels of these species varied widely among subjects. PCR detection showed C. rectus and Eikenella corrodens both to occur in 93% of the study subjects and to be the most prevalent putative periodontal pathogens examined. In decreasing order of prevalence, PCR identified Treponema denticola, A. actinomycetemcomitans, P. nigrescens, P. intermedia, B. forsythus, and P. gingivalis in 38% to 21% of the subjects studied. Tube-fed children and healthy controls exhibited similar subgingival microbial compositions. It appears from this study that oral food consumption is not a major determinant for the establishment of subgingival microbiota in children.

Correlations between vertebral regional bone mineral density (rBMD) and whole bone fracture load.

To assess the significance of regional quantitative computed tomography measurements of bone density with respect to mechanical strength in the human lumbar spine, 58 vertebrae (from 12 males, 10 females) were scanned in vitro with multiple-thin-slice quantitative computed tomography and then compressed to fracture. With computer graphics, 18 specific regions of physical density and 10 combination averages of density were identified within each vertebral body. To ensure the statistical independence of data, the individual vertebral specimens were assigned to one of three groups (T11-L1, L2-L3, or L4-L5). Use of best-subsets procedures resulted in regression models to predict fracture strength. These models used specific regional density values and often the age and sex of the donors. The correlation coefficients that resulted from the multiple regression models ranged from r = 0.88 to r = 0.95. When the density values were multiplied by the minimum cross-sectional area of the vertebral body, similar regional density averages were selected, and the predictive values were slightly improved (r = 0.94-0.97). The heterogeneity of the density samples (measured as standard deviation) in multiple regression fashion also produced strong correlation coefficients (r = 0.88-0.94). The bone density in an anterior cylinder of the midplane region, the location measured most often in quantitative computed tomography densitometry, was strongly correlated (r = 0.85) to fracture load for the T12-L1 group (N = 20), but was not significant for the other two groups of vertebrae. The cancellous bone density from the female data was not found to be significantly different from the male data set.(ABSTRACT TRUNCATED AT 250 WORDS)

Terbutaline pump tocolysis in high-order multiple gestation.

OBJECTIVE: To review terbutaline pump tocolytic therapy as part of the management of high-order multiple gestations (triplet and quadruplet pregnancies). STUDY DESIGN: We performed a retrospective review of the medical records of triplet and quadruplet pregnancies cared for by Phoenix Perinatal Associates from August 1988 to January 1992 in whom terbutaline pump tocolysis was administered. RESULTS: The study group consisted of 15 triplet pregnancies and 6 quadruplet pregnancies. The 15 patients with triplets delivered at a mean (+/- SD) gestational age of 33.0 +/- 1.9 weeks. The six patients with quadruplets delivered at 33.0 +/- 1.3 weeks. Only 2 of 15 (13%) of the triplets and 1 of 6 (17%) of the quadruplets were delivered for tocolytic failure. CONCLUSION: Terbutaline pump tocolysis provides safe and effective tocolytic therapy in a select group of high-order multifetal gestations.

Correlation of I-125 iothalamate and tc-99m DPTA measurements of GFR using the single injection method.

Simultaneous renal imaging and determination of GFR can be obtained using Tc-99m DTPA. In order to assess the accuracy of the GFR value, a comparison was made between commercial sources of Tc-99m DTPA and I-125 iothalamate. The calculation assumed monoexponential loss of each radiopharmaceutical from the renal compartment. Plasma measurements were made at two sampling intervals, 90 to 120 minutes and 180 to 240 minutes. An apparent volume of distribution calculated for plasma concentrations at 2 hours and 3 hours was examined as a single sample indication of GFR. GFR values appear to be higher with DPTA than with iothalamate at the earlier interval. Choice of the later sampling times may be desirable for patients with known renal disease. The apparent volume of distribution at 3 hours may be a convenient single sample for monitoring or surveying patients for renal disease.

A cone beam computed tomography system for true 3D imaging of specimens.

A system for 3D cone beam computed tomography has been developed, consisting of a microfocus x-ray source and x-ray image intensifier coupled to a CCD camera. Full width at half maximum resolving power has been experimentally measured to be 70 microns when imaging 10 mm diameter objects. The 3D nature of the resulting image data can be used to visualize internal structure and compute parameters such as volume, surface area, and surface/volume orientation.

A dynamic splint for use after total wrist arthroplasty.

Total wrist arthroplasty has been performed at the Mayo Clinic for the past 5 years. The procedure has necessitated the development of a dynamic wrist splint for post-operative care. This article provides a step-by-step outline for construction of this splint.

A different approach to evaluating home care service costs.

Agencies looking to compete in tomorrow's care provider market need to consider not only cost per visit, but overall cost per patient. This study uses parts of the Medicare cost report to compare cost per patient in 17 agencies in Connecticut and Massachusetts.