Hyaluronan serves a novel role in airway mucosal host defense.

Enzymes secreted onto epithelial surfaces play a vital role in innate mucosal defense, but are believed to be steadily removed from the surface by mechanical actions. Thus, the amount and availability of enzymes on the surface are thought to be maintained by secretion. In contrast to this paradigm, we show here that enzymes are retained at the apical surface of the airway epithelium by binding to surface-associated hyaluronan, providing an apical enzyme pool 'ready for use' and protected from ciliary clearance. We have studied lactoperoxidase, which prevents bacterial colonization of the airway, and kallikrein, which mediates allergic bronchoconstriction that limits the inhalation of noxious substances. Binding to hyaluronan inhibits kallikrein, which is needed only in certain situations, whereas lactoperoxidase, useful at all times, does not change its activity. Hyaluronan itself interacts withthe receptor for hyaluronic acid-mediated motility (RHAMM or CD168) that is expressed at the apex of ciliated airway epithelial cells. Functionally, hyaluronan binding to RHAMM stimulates ciliary beating. Thus, hyaluronan plays a previously unrecognized pivotal role in mucosal host defense by stimulating ciliary clearance of foreign material while simultaneously retaining enzymes important for homeostasis at the apical surface so that they cannot be removed by ciliary action.

Determination of polycyclic aromatic hydrocarbons using lab on valve dispersive liquid-liquid microextraction coupled to high performance chromatography.

In this work, dispersive liquid-liquid microextraction (DLLME) method was applied for high performance liquid chromatography (HPLC) determination of 15 PAHs in aqueous matrices.The extraction procedure was automated using a system of multisyringe flow injection analysis coupled to HPLC instrument with fluorescence detector. Factors affecting the extraction process, such as type and volume of extraction and dispersive solvent, extraction time and centrifugation step were investigated thoroughly and optimized utilizing factorial design. The best recovery was achieved using 100 µL of trichloroethylene as the extraction solvent and 900 µL of acetonitrile as the dispersive solvent.The results showed that extraction time has no effect on the recovery of PAHs. The enrichment factors of PAHs were in the range of 86-95 with limits of detection of 0.02-0.6 µg L(-1). The linearity was 0.2-600 µg L(-1) for different PAHs. The relative standard deviation (RSD) for intra- and inter-day of extraction of PAHs were in the range of 1.6-4.7 and 2.1-5.3, respectively, for five measurements.The developed method was used to assess the occurrence of 15 PAHs in tap water, rain waters and river surface waters samples.

Visualization of the thyrotropin receptor on the cell surface by potent autoantibodies.

In autoimmune thyroid disease there are various autoantibodies (Ab) to thyroid cell components. Among the best characterized are those to thyroid peroxidase (TPOAb) and to the thyrotropin receptor (TRAb). While TPOAb were successfully used to visualize TPO in human thyroid cells (HTC) and a rat thyroid cell line (FRTL5) by indirect immunofluorescence (IFL), similar attempts with TRAb and thyrotropin receptor (TSHR) failed. This could have been due to either relatively low serum levels of TRAb and/or low number of TSHR on thyroid cells. To test these hypotheses, we estimated the number of TSH binding sites on HTC, FRTL5 and Chinese hamster ovary (CHO) cells, transfected with cloned human TSHR (JP-26 cells), and for IFL staining employed 3 sera with the highest potency TRAb in our possession. A clear granular surface staining was detected on all 3 cell types with two sera; with the third, the least potent, no staining was seen. The density of staining paralleled the estimated number of TSHR per cell, i.e., JP-26 > FRTL5 > HTC. TSHR was also visualized on transiently transfected cells (COS-7-TSHR), facilitating quantitation of transfection. Our results suggest that the limiting factor in direct visualization of the TSHR is the TRAb concentration.

Characteristics and clinical correlates of a novel thyroid-stimulating autoantibody.

We reported a patient who gave birth to 3 children with transient neonatal hypothyroidism. She had 3 different antibodies (Ab) to the thyrotropin receptor (TSHR) in her serum, viz., TSH binding-inhibiting (TBIAb), thyroid-stimulating (TSAb) and an additional stimulating Ab (SAb). The SAb differed from TSAb in that its in vitro stimulating effect in human thyroid and FRTL5 cells was not inhibited by TBIAb [similar data now obtained with Chinese hamster ovary (CHO) cells transfected with cloned human TSHR]. Because of symptomatic goiter enlargement the patient underwent subtotal thyroidectomy. About 50% of the gland was infiltrated with lymphocytes; thyroid follicles had columnar epithelium, despite suppression of TSH by thyroxine and the presence of the potent TBIAb. Fifteen months later, when all 3 Ab showed a decline of approximately 3 fold, she gave birth to hypothyroid twins. These data support the following conclusions: 1) thyroidectomy and immunosuppression of pregnancy do not prevent neonatal thyroid disease if TSHR Ab (TRAb) are of high titer; 2) the thyroid is not a major site of TRAb production; 3) SAb is a thyroid stimulator, distinct from TSAb in that it does not share binding epitopes on the TSHR with either TSH or TBIAb; 4) SAb was the probable cause of thyroid growth in this patient.

Systemic pilocarpine increases deposition of and decreases responsiveness to inhaled carbachol in sheep.

The purpose of this study was to determine whether excessive airway secretions could serve as a barrier function against inhaled particulate matter. To increase airway secretions, six conscious sheep were treated with pilocarpine (0.8 mg/kg i.v.). Pilocarpine increased pulmonary resistance (RL) and total aerosol deposition within five breaths (AD5) as determined by the rebreathing of an inert monodisperse aerosol. When RL had returned to baseline, AD5 remained elevated [21 +/- 2% (SE), P < 0.05] and tracheal secretions were increased (237 +/- 77%, P < 0.05) above the values before pilocarpine administration. A carbachol aerosol dose-response curve was carried out at this time and compared with a control carbachol dose-response curve by calculating the dose of carbachol required to increase RL by 400% (PD400). Mean PD400 was increased postpilocarpine by 53 +/- 18 (P < 0.05) and 85 +/- 25% (P < 0.05) when normalized for increased aerosol deposition. Thus, pilocarpine decreased airway responsiveness to inhaled carbachol despite increasing aerosol deposition. The pilocarpine-induced airway hyporesponsiveness to inhaled carbachol is consistent with the hypothesis that excessive secretions have a protective role in the airways.

Inhaled porcine pancreatic elastase causes bronchoconstriction via a bradykinin-mediated mechanism.

Neutrophil elastase has been linked to inflammatory lung diseases such as chronic obstructive pulmonary disease, adult respiratory distress syndrome, emphysema, and cystic fibrosis. In guinea pigs, aerosol challenge with human neutrophil elastase causes bronchoconstriction, but the mechanism by which this occurs is not completely understood. Our laboratory previously showed that human neutrophil elastase releases tissue kallikrein (TK) from cultured tracheal gland cells. TK has been identified as the major kininogenase of the airway and cleaves both high- and low-molecular weight kininogen to yield lysyl-bradykinin. Because inhaled bradykinin causes bronchoconstriction and airway hyperresponsiveness in asthmatic patients and allergic sheep, we hypothesized that elastase-induced bronchoconstriction could be mediated by bradykinin. To test this hypothesis, we measured lung resistance (RL) in sheep before and after inhalation of porcine pancreatic elastase (PPE) alone and after pretreatment with a bradykinin B(2) antagonist (NPC-567), the specific human elastase inhibitor ICI 200,355, the histamine H(1)-antagonist diphenhydramine hydrochloride, the cysteinyl leukotriene 1 receptor antagonist montelukast, or the cyclooxygenase inhibitor indomethacin. Inhaled PPE (125-1,000 microg) caused a dose-dependent increase in RL. Aerosol challenge with a single 500 microg dose of PPE increased RL by 132 +/- 8% over baseline. This response was blocked by pretreatment with NPC-567 and ICI-200,355 (n = 6; P < 0.001), whereas treatment with diphenhydramine hydrochloride, montelukast, or indomethacin failed to block the PPE-induced bronchoconstriction. Consistent with pharmacological data, TK activity in bronchial lavage fluid increased 134 +/- 57% over baseline (n = 5; P < 0.02). We conclude that, in sheep, PPE-induced bronchoconstriction is in part mediated by the generation of bradykinin. Our findings suggest that elastase-kinin interactions may contribute to changes in bronchial tone during inflammatory diseases of the airways.

Particle size distribution of major inorganic species in atmospheric aerosols from Majorca (Spain).

Atmospheric aerosols collected by means of a cascade impaction system at the campus of the University of the Balearic Islands (Majorca, Spain) from November 1993 to February 1994 were analysed for chloride, nitrate, sulphate, ammonium, calcium, magnesium, sodium and potassium. Based on particle size distribution, the species studied were classified into three groups: (a) concentration decrease with particle size (sulphate and ammonium), (b) concentration increase with particle size (chloride, calcium, magnesium and sodium), and ( c) independent of particle size (nitrate and potassium). A principal component analysis (PCA) revealed a clear relationship between particle size and analyte origin. Also, the origin of sulphate and potassium fine and coarse particles was found to be different.

Minipol, a desk-computer program for refinement of protonation constants from differential-pulse polarographic data.

The program MINIPOL, designed to run on a desk-computer with 32 kbytes of memory, can calculate the optimum values of overall protonation constants and molar intensities of up to 8 species with composition H(XXX)L(rho), from differential-pulse polarographic data.

A simple thermometric technique for reaction-rate determination of inorganic species, based on the iodide-catalysed cerium(IV)-arsenic(III) reaction.

A very simple reaction-rate thermometric technique is used for determination of iodide (5-20 ng ml ), based on its catalytic action on the cerium(IV)-arsenic(III) reaction, and for determination of mercury(II) (1.5-10 ng ml ) and silver(I) (2-10 ng ml ), based on their inhibitory effect on this reaction. The reaction is followed by measuring the rate of temperature increase. The method suffers from very few interferences and is applied to determination of iodide in biological and inorganic samples, and Hg(II) and Ag(I) in pharmaceutical products.

Preconcentration and atomic absorption determination of iron by sequential injection analysis.

A sequential injection analysis (SIA) assembly for the atomic absorption determination of Fe(III) in natural waters is proposed. Iron is preconcentrated on a microcolumn packed with a chelating resin (Chelex 100) that is inserted in the manifold. The sample is passed through the column and the iron retained by the resin is subsequently eluted with 2 M HNO(3). The proposed SIA system affords automatic preconcentration, elution, detection of Fe(III), data acquisition and treatment. When 9 ml of iron solution containing 0.4 or 1 mg l(-1) was passed through the resin, the retention efficiency was 93.1 +/- 0.6 and 7.4 +/- 3.0% respectively, and when 27 ml of iron solution of 0.2 mg l(-1) was preconcentrated, the retention was 8.4 +/- 2.9%. The detection limits thus achieved is 12 mug l(-1) when 9 ml of sample are preconcentrated and 6 mug l(-1) for 27 ml.

Flow techniques in water analysis.

In the present work the main flow techniques for the analysis and monitoring of several parameters of interest in the quality control of different types of waters are reviewed. Firstly, a review involving the advantages and disadvantages of flow techniques, from those currently out-dated, such as segmented flow analysis (SFA), to the most modern techniques, such as flow injection analysis (FIA), sequential injection analysis (SIA) and multi-commutation techniques (MCFA), is carried out. On the other hand, a new technique, the multi-syringe flow analysis (MSFA) is hereby described for the first time as both a fast and robust alternative. Its possibilities, limitations and potential advantages when using this technique either on its own or coupled to SIA, which carries out a previous sample handling, are outlined.

Hyaluronic acid in cultured ovine tracheal cells and its effect on ciliary beat frequency in vitro.

Hyaluronic acid (hyaluronan, or HA) is secreted by submucosal glands, but its function in airway secretions other than influencing the rheology of mucus is not fully understood. HA is known to modulate cell behavior and to enhance sperm motility. Because sperm tails and cilia have the same microtubular structure, we studied the effect of HA on ciliary beat frequency (CBF) in vitro. CBF of cultured ovine airway epithelial cells was measured continuously by digital video microscopy. After removal of endogenous HA by hyaluronidase, cells were exposed to 50 to 100 microg/mL of HA at different times in culture. No change in CBF in response to HA was seen in cells cultured less than 7 days. After 7 days, however, 6 of 10 measured cells (from three different sheep) showed a transient CBF increase from a baseline of 6.4 +/- 0.3 Hz (mean +/- SE) to 7.4 +/- 0.4 Hz or 16% above baseline (p < 0.05). At these time points (but not before), cytochemical staining was positive for endogenous HA using a biotinylated HA-binding protein. These data suggest that HA can increase CBF of tracheal epithelial cells only late in culture when HA is able to bind to an unspecified cell surface structure. Because this binding has a physiological effect, we hypothesize that it is an HA-binding receptor, that is either transiently expressed late in culture or initially destroyed by the protease treatment for cell dispersion.

Sequential-injection procedure for determination of iodide in pharmaceutical and drinking water samples by catalytic reaction with spectrophotometric detection.

A novel sequential-injection system was developed for determination of iodide at very low concentrations by using a kinetic method. The method is based on the catalytic effect of iodide on the redox reaction between Ce4+ and As3+ first described by Sandell and Kolthoff. The calibration curve is constructed by measuring the decrease of Ce4+ absorbance versus iodide concentration with a delay time of 30 s. The detection limit is 1.5 microg/L, the working temperature is 45 degrees C, and the working range is 0.002-0.5 mg/L. Reasonable agreement was obtained when the method was applied to pharmaceutical and drinking water samples. The method has a sample throughput of approximately 15/h.

Characterization of bottom ash in municipal solid waste incinerators for its use in road base.

Incineration of municipal solid wastes (MSWs) produces by-products which can be broadly classified as bottom and fly ashes. Since MSW incineration started, possibilities other than landfilling the incineration residues have been sought; most initiatives in this sense tend to use these residues as aggregate substitute in pavements and other road construction elements. The main goal of the present work is the physical and chemical characterization of the local incineration bottom ash towards its eventual re-utilization. The study includes not only the specific aspects regarding its role as pavement element, but also the assessment of the environmental effects. Therefore, together with the determination of physical (moisture content, apparent and bulk densities, crystallinity, etc.) and engineering properties (particle size distribution, abrasion and impact resistance, etc.), full chemical characterization of the bottom ash and the study of leaching as a function of aging time have been undertaken. The results obtained indicate that the metal content of both the raw bottom ash and its leachates fulfill the environmental regulations provided that the bottom ash is stored for at least one month. Engineering properties of the bottom ash are close to those of natural aggregates and, thus, road-construction use of these residues seems to be feasible.

Multisyringe chromatography (MSC) using a monolithic column for the determination of sulphonated azo dyes.

A methodology based on multisyringe chromatography with a monolithic column was developed to determine three sulphonated azo textile dyes: Acid Yellow 23, Acid Yellow 9 and Acid Red 97. An ion pair reagent was needed because of the low affinity between the monolithic column and the anionic dyes. The proposed analytical system is simple, versatile and low-cost and has great flexibility in manifold configuration. The method was optimized through experimentation based on experimental design methodology. For this purpose two blocks of full factorial 2(3) were done sequentially. In the first experimental plan, the factors studied were: the % of acetonitrile in organic phase, the % of H(2)O in the mobile phase and the kind of ion pair reagent. In this stage, a simple configuration was used which has only one syringe for the mobile phase. After the first experimentation, we added a second syringe with a second mobile phase to the multisyringe module and performed a second full factorial 2(3). The factors studied in this case were: the % of acetonitrile in the second mobile phase, the pH and the concentration of ion pair reagent in both mobile phases. After this design, the optimal conditions were selected for obtaining a good resolution between the peaks of yellow dyes (1.47) and the elution of red dye in less than 8 min. The methodology was validated by spiking different amounts of each dye in real water samples, specifically, tap water, well water and water from a biological wastewater lagoon.

A multisyringe sequential injection method for monitoring water in the energy cogeneration system of a municipal waste incinerator.

Leading-edge urban solid waste ashing plants use burning heat energy to obtain electrical power. Water fed to their boilers for conversion into steam should be highly pure in order to minimize corrosion, scaling and similar phenomena, which can lead to malfunctioning and a reduced useful life but can be avoided by proper management and control of the water supply. In this work, we developed a multiparameter monitor based on multisyringe sequential injection for the sequential determination of up to eight important parameters, namely: pH, specific and acid conductivity, hydrazine, ammonium, phosphate, silicate and total iron. Acid conductivity was determined by passing the sample through a cation-exchange resin in order to retain ammonium ion and release protons. This parameter was deemed the most accurate indicator of dissolved solids in boiler water. Chemical parameters were determined spectrophotometrically: hydrazine by reaction with p-dimethylaminobenzaldehyde, ammonium by the modified Berthelot reaction, iron with o-phenanthroline, and phosphate and silica by formation of a molybdoheteropoly blue dye in the presence of ascorbic acid as reductant. Use of the optimum chemical and physical operating conditions provided 3s(blank) detection limits of 0.01 mg l(-1) N(2)H(4), 0.13 mg l(-1) NH(4)(+), 0.04 mg l(-1) Fe, 0.03 mg l(-1) SiO2 and 0.05 mg l(-1) PO(4)(3-), and relative standard deviations not greater than 2.5%. The methods integrated in the proposed monitor were successfully applied to real samples from the water-steam cycle at the Son Reus ashing plant in Palma de Mallorca (Spain).

Potential of multisyringe flow-based multicommutated systems.

This work is aimed at emphasizing the potential of the multicommutated systems based on the multisyringe flow injection analysis (MSFIA) modality. First, the characteristics, advantages and withdraws offered by flow analysis systems based on the different non-segmented modalities are briefly described. In these systems, multicommutation and computer control of the analytical process occupy a predominant place, as in the case of sequential injection analysis (SIA), multicommutated flow injection analysis (MCFIA), MSFIA and multipumping flow systems (MPFS). Next, several examples are given and different aspects of the implementation of analysers based on MSFIA designs for the construction of different analysis systems, including intelligent (smart) systems, use of sample pre-treatment automatic systems, for chromatographic and non-chromatographic determinations as well as use of monolithic or capillary electrophoresis columns are considered.

Speciation analysis of inorganic arsenic by a multisyringe flow injection system with hydride generation-atomic fluorescence spectrometric detection.

In this study, a new technique by hydride generation-atomic fluorescence spectrometry (HG-AFS) for determination and speciation of inorganic arsenic using multisyringe flow injection analysis (MSFIA) is reported. The hydride (arsine) was generated by injecting precise known volumes of sample, a reducing sodium tetrahydroborate solution (0.2%), hydrochloric acid (6M) and a pre-reducing solution (potassium iodide 10% and ascorbic acid 0.2%) to the system using a multisyringe burette coupled with one multi-port selection valve. This solution is used to pre-reduce As(V) to As(III), when the task is to speciate As(III) and As(V). As(V) is determined by the difference between total inorganic arsenic and As(III). The reagents are dispensed into a gas-liquid separation cell. An argon flow delivers the arsine into the flame of an atomic fluorescence spectrometer. A hydrogen flow has been used to support the flame. Nitrogen has been employed as a drier gas (Fig. 1). Several variables such as sample and reagents volumes, flow rates and reagent concentrations were investigated in detail. A linear calibration graph was obtained for arsenic determination between 0.1 and 3 microg l(-1). The detection limit of the proposed technique (3sigma(b)/S) was 0.05 microg l(-1). The relative standard deviation (R.S.D.) of As at 1 microg l(-1) was 4.4 % (n=15). A sample throughput of 10 samples per hour was achieved. This technique was validated by means of reference solid and water materials with good agreement with the certified values. Satisfactory results for speciation of As(III) and As(V) by means of the developed technique were obtained.

Determination of mercury by multisyringe flow injection system with cold-vapor atomic absorption spectrometry.

A new software-controlled time-based multisyringe flow injection system for mercury determination by cold-vapor atomic absorption spectrometry is proposed. Precise known volumes of sample, reducing agent (1.1% SnCl2 in 3% HCl) and carrier (3% HCl) are dispensed into a gas-liquid separation cell with a multisyringe burette coupled with one three-way solenoid valve. An argon flow delivers the reduced mercury to the spectrometer. The optimization of the system was carried out testing reaction coils and gas-liquid separators of different design as well as changing parameters, such as sample and reagents volumes, reagent concentrations and carrier gas flow rate, among others. The analytical curves were obtained within the range 50-5000 ng L(-1). The detection limit (3sigma(b)/S) achieved is 5 ng L(-1). The relative standard deviation (R.S.D.) was 1.4%, evaluated from 16 successive injections of 250 ng L(-1) Hg standard solution. The injection and sample throughput per hour were 44 and 11, respectively. This technique was validated by means of solid and water reference materials with good agreement with the certified values and was successfully applied to fish samples.

The effect of mast cell chymase on extracellular matrix: studies in autoimmune thyroiditis and in cultured thyroid cells.

In the first part of the study we analyzed the morphology of mast cells in autoimmune thyroiditis of BB/W rats. In the early stage of thyroiditis mast cells showed exocytosis of granules into the interstitium; this was associated with disorganization of the extracellular matrix and the appearance of a translucent ground substance in stroma. Mast cells were not seen in the mononuclear infiltrates in the later stages of thyroiditis. In order to further study the effect of mast cells on the extracellular matrix, we evaluated the effect of mast cell lysate and purified chymase on the matrix of cultured thyroid cells. Mast cells were obtained from peritoneal cavity; mast cell chymase was purified by anion exchange chromatography. After exposure to chymase there was a reduction of pericellular fibronectin in cultured thyroid cells, while laminin in matrix remained unchanged. Similarly, as found by gel electrophoresis, soluble fibronectin and vitronectin were digested by chymase in the reaction mixture. Cell attachment on both fibronectin and vitronectin was significantly decreased upon exposure of matrix proteins to chymase. The effects of chymase were abolished by enzyme inhibitor phenylmethane sulfonyl fluoride. These data suggest that mast cells possess proteolytic enzymes capable of digesting different host proteins which may have a role in the thyroid cell interaction with the surrounding matrix.