RESUMO
BACKGROUND: The current coronavirus infectious disease 2019 (COVID-19) pandemic has caused unexpected pressure on medical supplies, interrupting supply chains and increasing prices. The supply of antiviral filters which form an essential part of the ventilator circuit have been affected by these issues. Three-dimensional (3D) printing may provide a solution to some of these issues. METHODS: We designed and tested 3D printed heat and moisture exchange (HME) and antiviral casing. For each casing we tested two different filter materials derived from a sediment water filter cartridge or 1.5-µm glass fiber filter paper. A polyurethane sponge was used for the HME. Each design was tested for circuit leak, circuit compliance, peak inspiratory pressure and casing integrity using methylene blue dye. RESULTS: We designed, produced, and tested two different types of antiviral filters with six different internal configurations. Overall, we tested 10 modified filter designs and compared them with the original commercial filter. Except for the combination of 1.5-µm filter paper and 5 mm sponge peak inspiratory pressure and circuit compliance of the filters produced were within the operating limits of the ventilator. All In addition, all filters passed the dye test. CONCLUSIONS: Our filter may be of particular importance to those working in low middle-income countries unable to compete with stronger economies. Our design relies on products available outside the healthcare supply chain, much of which can be purchased in grocery stores, hardware stores, or industrial and academic institutions. We hope that these HMEs and viral filters may be beneficial to clinicians who face critical supply chain issues during the COVID-19 pandemic.
Assuntos
Impressão Tridimensional , Ultrafiltração/instrumentação , Ventiladores Mecânicos , Vírus , COVID-19/terapia , Corantes , Desenho de Equipamento , Estudos de Viabilidade , Humanos , Pandemias , Papel , Pico do Fluxo Expiratório , Poliuretanos , Reprodutibilidade dos Testes , Tampões de Gaze CirúrgicosRESUMO
PURPOSE: To assess corneal stiffening of standard (S-CXL) and accelerated (A-CXL) cross-linking protocols by dynamic corneal response parameters and corneal bending stiffness (Kc[mean/linear]) derived from Corvis (CVS) Scheimpflug-based tonometry. These investigations were validated by corneal tensile stiffness (K[ts]), derived from stress-strain extensometry in ex vivo porcine eyes. METHODS: Seventy-two fresh-enucleated and de-epithelized porcine eyes were soaked in 0.1% riboflavin solution including 10% dextran for 10 min. The eyes were separated into four groups: controls (n = 18), S-CXL (intensity in mW/cm2*time in min; 3*30) (n = 18), A-CXL (9*10) (n = 18), and A-CXL (18*5) (n = 18), respectively. CXL was performed using CCL Vario. CVS measurements were performed on all eyes. Subsequently, corneal strips were extracted by a double-bladed scalpel and used for stress-strain measurements. K[ts] was calculated from a force-displacement curve. Mean corneal stiffness (Kc[mean]) and constant corneal stiffness (Kc[linear]) were calculated from raw CVS data. RESULTS: In CVS, biomechanical effects of cross-linking were shown to have a significantly decreased deflection amplitude as well as integrated radius, an increased IOP, and SP A1 (P < 0.05). Kc[mean]/Kc[linear] were significantly increased after CXL (P < 0.05). In the range from 2 to 6% strain, K[ts] was significantly higher in S-CXL (3*30) compared to A-CXL (9*10), A-CXL (18*5), and controls (P < 0.05). At 8% to 10% strain, all protocols induced a higher stiffness than controls (P < 0.05). CONCLUSION: Several CVS parameters and Kc[mean] as well as Kc[linear] verify corneal stiffening effect after CXL on porcine eyes. S-CXL seems to have a higher tendency of stiffening than A-CXL protocols have, which was demonstrated by Scheimpflug-based tonometry and stress-strain extensometry.
Assuntos
Colágeno , Fármacos Fotossensibilizantes , Animais , Fenômenos Biomecânicos , Córnea , Reagentes de Ligações Cruzadas/farmacologia , Elasticidade , Fármacos Fotossensibilizantes/farmacologia , Riboflavina/farmacologia , Suínos , Raios UltravioletaAssuntos
Ceratocone , Humanos , Ceratocone/diagnóstico , Microscopia , Córnea , Topografia da Córnea , Curva ROCRESUMO
PURPOSE: To evaluate the prediction accuracy of various intraocular lens (IOL) power calculation formulas on American Society of Cataract and Refractive Surgery (ASCRS) calculator and Barrett True-K total keratometry (TK) in eyes with previous laser refractive surgery for myopia. METHODS: This retrospective study included eyes with history of myopic laser refractive surgery, which have undergone clear or cataractous lens extraction by phacoemulsification followed by IOL implantation. Those who underwent uneventful crystalline lens extraction were included. Eyes with any complication of refractive surgery or those with eventful lens extraction procedure and those who were lost to follow-up were excluded. Formulas compared were Wang-Koch-Maloney, Shammas, Haigis-L, Barrett True-K no-history formula, ASCRS average power, ASCRS maximum power on the ASCRS post-refractive calculator and the IOLMaster 700 Barrett True-K TK. Prediction error was calculated as the difference between the implanted IOL power and the predicted power by various formulae available on ASCRS online calculator. RESULTS: Forty post-myopic laser-refractive surgery eyes of 26 patients were included. Friedman's test revealed that Shammas formula, Barrett True-K, and ASCRS maximum power were significantly different from all other formulas (P < 0.00001 for each). Median absolute error (MedAE) was the least for Shammas and Barrett True-K TK formulas (0.28 [0.14, 0.36] and 0.28 [0.21, 0.39], respectively) and the highest for Wang-Koch-Maloney (1.29 [0.97, 1.61]). Shammas formula had the least variance (0.14), while Wang-Koch-Maloney formula had the maximum variance (2.66). CONCLUSION: In post-myopic laser refractive surgery eyes, Shammas formula and Barrett True-K TK no-history formula on ASCRS calculator are more accurate in predicting IOL powers.
Assuntos
Lentes Intraoculares , Óptica e Fotônica , Refração Ocular , Humanos , Estudos Retrospectivos , Feminino , Masculino , Refração Ocular/fisiologia , Pessoa de Meia-Idade , Miopia/cirurgia , Miopia/fisiopatologia , Miopia/diagnóstico , Sociedades Médicas , Facoemulsificação , Biometria/métodos , Acuidade Visual , Estados Unidos/epidemiologia , Adulto , Seguimentos , Idoso , Reprodutibilidade dos TestesRESUMO
Anatomically, normal cells found in an abnormal site are known as choristoma. When any two of the three-cell lineage of the mullerian duct, that is endosalpinx, endocervix and endometrium, are found at an abnormal location, it is termed mullerian choristoma or mullerianosis. Mullerianosis histologically reveals glands of varying sizes lined by cervical, tubal and endometrial cells. Individual cell lineages like endometriosis of the ovary, endosalpingiosis and endocervicosis of the urinary bladder are common. But mullerianosis is quite rare, and as per literature, only about 20 cases have been reported. We report a mullerianosis involving the liver and lung in a 41-year-old female that mimicked metastatic biliary cystadenocarcinoma. It is the first case reported in literature where there is simultaneous involvement of the liver and lung by mullerianosis. The diagnosis was made with the help of histopathology and immunohistochemistry in the resected specimens.
Assuntos
Coristoma , Cistadenocarcinoma , Neoplasias Pulmonares , Ductos Paramesonéfricos , Humanos , Feminino , Adulto , Diagnóstico Diferencial , Ductos Paramesonéfricos/patologia , Coristoma/diagnóstico , Coristoma/patologia , Cistadenocarcinoma/diagnóstico , Cistadenocarcinoma/patologia , Neoplasias Pulmonares/diagnóstico , Neoplasias Pulmonares/patologia , Neoplasias Pulmonares/secundário , Neoplasias Hepáticas/diagnóstico , Neoplasias Hepáticas/secundário , Neoplasias Hepáticas/patologiaRESUMO
Purpose: To evaluate the accuracy of intraocular lens (IOL) power prediction of the formulas available on the American Society of Cataract and Refractive Surgery (ASCRS) post-refractive calculator in eyes with prior radial keratotomy (RK) for myopia. Methods: This retrospective study included 25 eyes of 18 patients whose status was post-RK for treatment of myopia, which had undergone cataract extraction with IOL implantation. Prediction error was calculated as the difference between implanted IOL power and predicted power by various formulae available on ASCRS post-refractive calculator. The formulas compared were Humphrey Atlas method, IOLMaster/Lenstar method, Barrett True-K no-history formula, ASCRS Average power, and ASCRS Maximum power on ASCRS post-refractive calculator. Results: Median absolute errors were the least for Barrett True-K and ASCRS Maximum power, that is, 0.56 (0.25, 1.04) and 0.56 (0.25, 1.06) D, respectively, and that of Atlas method was 1.60 (0.85, 2.28) D. Median arithmetic errors were positive for Atlas, Barrett True-K, ASCRS Average (0.86 [-0.17, 1.61], 0.14 [-0.22 to 0.54], and 0.23 [-0.054, 0.76] D, respectively) and negative for IOLMaster/Lenstar method and ASCRS Maximum power (-0.02 [-0.46 to 0.38] and - 0.48 [-1.06 to - 0.22] D, respectively). Multiple comparison analysis of Friedman's test revealed that Atlas formula was significantly different from IOLMaster/Lenstar, Barrett True-K, and ASCRS Maximum power; ASCRS Maximum power was significantly different from all others (P < 0.00001). Conclusion: In post-RK eyes, Barrett True-K no-history formula and ASCRS Maximum power given by the ASCRS calculator were more accurate than other available formulas, with ASCRS Maximum leading to more myopic outcomes when compared to others.
Assuntos
Catarata , Ceratotomia Radial , Lentes Intraoculares , Miopia , Procedimentos Cirúrgicos Refrativos , Humanos , Estudos Retrospectivos , Miopia/diagnóstico , Miopia/cirurgiaRESUMO
PURPOSE: The aim of this study was to analyze the biomechanical effect of accelerated corneal cross-linking (9*10) in progressive keratoconus (KC) in comparison to untreated fellow eyes using Scheimpflug-based tonometry (Corvis ST, CVS). METHODS: Forty-three eyes of 43 patients with KC showed progressive KC and were treated using accelerated corneal cross-linking. Twenty-five untreated fellow eyes were used as the control group. All eyes were examined biomechanically (CVS) and tomographically (Pentacam) at baseline, after 1-month, 6-month, and 12-month follow-up. Statistical analysis was performed using a linear mixed model. A logistic regression was performed to attribute the effects of changes in each parameter to treatment status (treated or untreated). RESULTS: Maximum keratometry values decreased statistically significantly at 12 months by -1.1 D (95 confidence interval: -2.0 to -0.1, P = 0.025) compared with baseline. Thinnest corneal thickness decreased significantly after 1 month ( P < 0.001) and recovered to baseline after 12 months ( P = 0.752). In the corneal cross-linking (CXL) group, biomechanical changes were observed by an increased bIOP, a shorter A2 time, and a lower integrated radius after 1 month (all P < 0.05). No biomechanical and tomographical changes were observed in the control group (all P > 0.05). Logistic regression pointed out that treated eyes can be separated from untreated eyes by differences in bIOP, corneal thickness, A1 velocity, integrated radius, and Kc mean at 1, 6, and 12 months. CONCLUSIONS: The alterations in biomechanical parameters indicated a corneal stiffening effect after CXL treatment, which was mostly detectable 1 month after treatment, although corneal thickness was reduced. The logistic regression model showed an adequate separation between CXL-treated and untreated eyes.
Assuntos
Ceratocone , Fotoquimioterapia , Humanos , Ceratocone/tratamento farmacológico , Seguimentos , Fármacos Fotossensibilizantes/uso terapêutico , Estudos Prospectivos , Topografia da Córnea , Riboflavina/uso terapêutico , Acuidade Visual , Reagentes de Ligações Cruzadas/uso terapêutico , Colágeno/uso terapêuticoRESUMO
PURPOSE: To define the external scleral sulcus (ESS) on a Scheimpflug image and use it for a morphometric analysis of corneal diameter (CD). DESIGN: Retrospective, cross-sectional study of pediatric Asian-Indian eyes. METHODS: One random eye of 353 subjects between 5 and 18 years underwent 25-scan Pentacam HR imaging. For all scans, densitometry values along the anterior corneal edge were recorded and differentiated. The peaks on the differentiated curve were chosen as the ESS points, and this distance between them was called CD. Vertical (vCD), maximum (maxCD), minimum (minCD) CD and their meridians were defined. Multiple regression models (MRMs) with CD and other Pentacam parameters were built to predict astigmatism and its axis, mean keratometry (Kmean), and Belin/Ambrósio enhanced ectasia display deviation (BAD-D). MRMs were validated using intraclass correlation coefficient (ICC). Estimated horizontal CD (hCD) was validated against digital caliper measurement using ICC. RESULTS: The ICC (95% CI) between caliper and hCD was 0.96 (0.93, 0.97). MRM predictions (P < .001) used CD parameters, anterior chamber depth, corneal volume and distance from the corneal thinnest location to apex. These predictions achieved an ICC of 0.34 (0.18, 0.46), 0.82 (0.78, 0.86), 0.87 (0.84, 0.89), and 0.81 (0.76, 0.84), respectively. The astigmatism axis prediction depended on the minCD and maxCD meridians. Its within-subject SD (4.97°) was less than 2 consecutive Pentacam scan angles (7.2°). CONCLUSIONS: The CD metric strongly correlated with the astigmatism axis, keratometry, and BAD-D. Its spatial description may be significant in corneal treatment planning and disease diagnoses.
Assuntos
Astigmatismo , Meridianos , Humanos , Criança , Topografia da Córnea/métodos , Estudos Retrospectivos , Astigmatismo/diagnóstico , Estudos Transversais , Córnea/diagnóstico por imagemRESUMO
PURPOSE: To develop a new virtual surgery simulation platform to predict postoperative corneal stiffness (Kc mean ) after laser vision correction (LVC) surgery. SETTING: Narayana Nethralaya Eye Hospital and Sankara Nethralaya, India; Humanitas Clinical and Research Center, Italy. DESIGN: Retrospective observational case series. METHODS: 529 eyes from 529 patients from 3 eye centers and 10 post-small-incision lenticule extraction (SMILE) ectasia eyes were included. The software (called AcuSimX) derived the anisotropic, fibril, and extracellular matrix biomechanical properties (using finite element calculation) of the cornea using the preoperative Corvis-ST, Pentacam measurement, and inverse finite element method assuming published healthy collagen fibril orientations. Then, the software-computed postoperative Kc mean was adjusted with an artificial intelligence (AI) model (Orange AI) for measurement uncertainties. A decision tree was developed to classify ectasia from normal eyes using the software-computed and preoperative parameters. RESULTS: In the training cohort (n = 371 eyes from 371 patients), the mean absolute error and intraclass correlation coefficient were 6.24 N/m and 0.84 (95% CI, 0.80-0.87), respectively. Similarly, in the test cohort (n = 158 eyes from 158 patients), these were 6.47 N/m and 0.84 (0.78-0.89), respectively. In the 10 ectasia eyes, the measured in vivo (74.01 [70.01-78.01]) and software-computed (74.1 [69.03-79.17]) Kc mean were not statistically different ( P = .96). Although no statistically significant differences in these values were observed between the stable and ectasia groups ( P ≥ .14), the decision tree classification had an area under the receiver operating characteristic curve of 1.0. CONCLUSIONS: The new software provided an easy-to-use virtual surgery simulation platform for post-LVC corneal stiffness prediction by clinicians and was assessed in post-SMILE ectasia eyes. Further assessments with ectasia after surgeries are required.
Assuntos
Inteligência Artificial , Córnea , Humanos , Córnea/cirurgia , Topografia da Córnea/métodos , Dilatação Patológica , Estudos Retrospectivos , SoftwareRESUMO
Oral friction on the tongue surface plays a pivotal role in mechanics of food transport, speech, sensing, and hedonic responses. The highly specialized biophysical features of the human tongue such as micropapillae-dense topology, optimum wettability, and deformability present architectural challenges in designing artificial tongue surfaces, and the absence of such a biomimetic surface impedes the fundamental understanding of tongue-food/fluid interaction. Herein, we fabricate for the first time, a 3D soft biomimetic surface that replicates the topography and wettability of a real human tongue. The 3D-printed fabrication contains a Poisson point process-based (random) papillae distribution and is employed to micromold soft silicone surfaces with wettability modifications. We demonstrate the unprecedented capability of these surfaces to replicate the theoretically defined and simulated collision probability of papillae and to closely resemble the tribological performances of human tongue masks. These de novo biomimetic surfaces pave the way for accurate quantification of mechanical interactions in the soft oral mucosa.
Assuntos
Materiais Biomiméticos/química , Impressão Tridimensional , Língua/química , Animais , Humanos , Lubrificação , Tamanho da Partícula , Silicones/química , Propriedades de Superfície , Suínos , MolhabilidadeRESUMO
Over the last two decades, the development and production of innovative, customer-tailored food products with enhanced health benefits have seen major advances. However, the manufacture of edible materials with tuned physical and organoleptic properties requires a good knowledge of food microstructure and its relationship to the macroscopic properties of the final food product. Food products are complex materials, often consisting of multiple phases. Furthermore, each phase usually contains a variety of biological macromolecules, such as carbohydrates, proteins and lipids, as well as water droplets and gas bubbles. Micronutrients, such as vitamins and minerals, might also play an important role in determining and engineering food microstructure. Considering this complexity, highly advanced physio-chemical techniques are required for characterizing the microstructure of food systems prior to, during and after processing. Fast, in situ techniques are also essential for industrial applications. Due to the wide variety of instruments and methods, the scope of this paper is focused only on the latest advances of selected food characterization techniques, with emphasis on soft, multi-phasic food materials.
Assuntos
Análise de Alimentos , Animais , Carboidratos/análise , Humanos , Lipídeos/análise , Minerais/análise , Proteínas/análise , Vitaminas/análise , Água/análiseRESUMO
PRéCIS:: Anterior chamber depth, IOP, and thickness confounded the assessment of corneal biomechanical properties with noncontact applanation in glaucoma eyes. Compared with normal eyes, glaucoma eyes, which underwent long-term treatment or filtration surgery, had similar properties. PURPOSE: The purpose of this study was to evaluate corneal stiffness in primary angle-closure (PACG) and primary open-angle (POAG) glaucoma eyes that were subgrouped on the basis of the type of topical medication and filtration surgery using noncontact applanation. METHODS: All eyes were retrospectively reviewed for intraocular pressure (IOP) with Corvis-ST (OCULUS Optikgerate Gmbh, Germany). Nonglaucoma (n=140), PACG (n=102 under medication), and POAG (n=154 under medication) eyes were included. Corneal stiffness was calculated using deformation amplitude and a biomechanical model. Multivariate analyses were performed, which evaluated the effect of systemic conditions (diabetes and hypertension), the effect of medication (prostaglandins or beta blockers or combined), and the effect of filtration surgery (PACG: n=23; POAG: n=26). Age, IOP, central corneal thickness (CCT), refractive error, and anterior chamber depth (ACD) were covariates. RESULTS: Diabetes and hypertension did not alter corneal stiffness of glaucoma eyes compared with nonglaucoma eyes (P>0.05). Corneal stiffness of POAG and nonglaucoma eyes was similar but significantly different from the stiffness of PACG eyes (P=0.002), irrespective of the type of topical medication. This difference was strongly correlated with ACD (P=0.003) in addition to IOP and CCT. In eyes treated with filtration surgery, ACD (P=0.04) again impacted the trends between nonglaucoma and glaucoma eyes. CONCLUSIONS: Medication or filtration surgery did not affect the corneal biomechanical parameters differentially from nonglaucoma eyes. However, IOP, CCT, and ACD strongly affected corneal biomechanical parameters in the same glaucoma eyes.
Assuntos
Anti-Hipertensivos/uso terapêutico , Biometria/métodos , Córnea/fisiopatologia , Cirurgia Filtrante , Glaucoma/tratamento farmacológico , Glaucoma/fisiopatologia , Glaucoma/cirurgia , Idoso , Fenômenos Biomecânicos , Topografia da Córnea , Estudos Transversais , Feminino , Cirurgia Filtrante/efeitos adversos , Humanos , Índia , Pressão Intraocular/efeitos dos fármacos , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Tonometria OcularRESUMO
Purpose: To quantify biomechanical change associated with autoimmune diseases using Corvis ST deformation data. Methods: Cross-sectional, observational, case control study of 76 patients with systemic autoimmune disease and 21 control subjects. All patients underwent detailed ophthalmic examination with Corvis-ST (Oculus Optikgerate Gmbh, Germany) measurements for biomechanical properties of the eye. Corneal deformation and also deformation caused by the extracorneal tissue were recorded. Using a mathematical formula, the three parameters, namely, corneal stiffness (kc), extracorneal tissue stiffness (kg), and extracorneal tissue viscosity (µg), were defined. Results: The biomechanical analysis showed that kc and µg were significantly lower in patients with systemic autoimmune disease with eye manifestations than control group. However statistically, it was significant in rheumatoid arthritis (RA) patients only. Conclusion: The new parameters, namely, kc, kg, and µg, can provide a sensitive marker of the ocular activity of the collagen vascular diseases.
Assuntos
Doenças Autoimunes/complicações , Córnea/fisiopatologia , Doenças da Córnea/fisiopatologia , Pressão Intraocular/fisiologia , Adulto , Córnea/diagnóstico por imagem , Doenças da Córnea/diagnóstico , Doenças da Córnea/etiologia , Estudos Transversais , Elasticidade , Feminino , Seguimentos , Humanos , Masculino , Oftalmoscopia , Estudos Retrospectivos , Microscopia com Lâmpada de FendaRESUMO
PURPOSE: To analyze the acute effect of flap cut in laser in situ keratomileusis (LASIK) eyes and cap cut in small incision lenticule extraction (SMILE) eyes on corneal biomechanical properties of patients undergoing surgery. METHODS: This was a prospective, interventional, longitudinal case series. Forty-eight eyes of 24 patients underwent contralateral LASIK and SMILE. Corvis ST (Oculus Optikgeräte GmbH, Wetzlar, Germany) measurements were performed preoperatively, intraoperatively, and 1 week and 1 month after surgery. In LASIK eyes, the flap was cut but not lifted before intraoperative measurements. In SMILE eyes, the cap and side cut incision were made before intraoperative measurement. Thirty biomechanical variables were analyzed, assuming multiple comparisons. RESULTS: In LASIK and SMILE eyes, 36.7% and 13.3% of the total number of variables detected biomechanical weakening after flap and cap cuts (P = .02), respectively. Further, 13.3% and 40% of the total variables detected no biomechanical changes after flap and cap cut, respectively (P = .03). These acute biomechanical effects of flap and cap cuts did not influence 1-week and 1-month measurements (P > .05) because both LASIK and SMILE eyes showed similar biomechanical weakening. CONCLUSIONS: Flap and cap cuts induced biomechanical weakening in patient corneas. The flap caused more weakening than the cap intraoperatively. However, biomechanical differences between LASIK and SMILE eyes were similar after removal of tissue and ongoing wound healing. [J Refract Surg. 2019;35(5):324-332.].
Assuntos
Córnea/fisiologia , Substância Própria/cirurgia , Cirurgia da Córnea a Laser/métodos , Elasticidade/fisiologia , Ceratomileuse Assistida por Excimer Laser In Situ/métodos , Miopia/cirurgia , Retalhos Cirúrgicos/fisiologia , Adulto , Fenômenos Biomecânicos , Feminino , Seguimentos , Humanos , Lasers de Excimer/uso terapêutico , Masculino , Miopia/fisiopatologia , Estudos Prospectivos , Refração Ocular , Acuidade VisualRESUMO
PURPOSE: To assess whether corneal viscous properties are measureable with air-puff applanation in patients. METHODS: The study had 312 normal eyes, 107 fellow eyes of patients with keratoconus, and 289 keratoconic eyes. The Corvis ST (Oculus Optikgeräte GmbH, Wetzlar, Germany) deformation data for all eyes were analyzed using two models. First, a standard linear solid model (SLM) assumed the cornea was an elastic material only. Second, a two-compartment Kelvin-Voigt model (KVM) assumed the cornea was a visco-elastic material. Corneal stiffness and viscosity were calculated. Further, the deflection amplitude was phase shifted virtually relative to the air-puff applanation force to assess whether the KVM was capable of detecting corneal viscous properties from air-puff applanation. This was similar in concept to measured viscoelastic deformations in other soft tissues. The hysteresis area was also calculated with deformation (cornea and whole globe) and deflection (cornea only) amplitude. The greater the magnitude of the hysteresis area, the greater was the magnitude of corneal viscosity (µc). RESULTS: Both the SLM and KVM reported similar magnitudes of corneal stiffnesses (correlation coefficient > 0.99). However, for a given model, corneal stiffness was significantly different between normal, fellow, and keratoconic eyes (P = .001). From the KVM, the corneal viscosity was different between groups (P = .001) but was small in magnitude (order of 10-9). The deflection hysteresis area was also small in magnitude (order of 10-6). In contrast, the KVM detected significant corneal viscosity only when the deflection amplitude was virtually phase shifted with respect to the air-puff applanation force. CONCLUSIONS: No significant corneal viscous response was detected in patients who had air-puff applanation. [J Refract Surg. 2019;35(11):730-736.].
Assuntos
Córnea/diagnóstico por imagem , Pressão Intraocular , Ceratocone/diagnóstico , Tonometria Ocular/métodos , Adulto , Córnea/fisiopatologia , Paquimetria Corneana , Topografia da Córnea , Elasticidade , Feminino , Seguimentos , Humanos , Ceratocone/fisiopatologia , Masculino , Estudos Retrospectivos , Viscosidade , Adulto JovemRESUMO
The purpose of this study was to evaluate the tomographic features of postrefractive surgery eyes. This was a retrospective evaluation of clinical data. Three patients with post-LASIK (laser-assisted in situ keratomileusis) and two patients with post-SMILE (small incision lenticule extraction) ectasia were imaged with Scheimpflug imaging (SI, Pentacam) and optical coherence tomography (OCT, RTVue). Curvature and wavefront aberrations of the air-epithelium interface (A-E) and epithelium-Bowman's layer interface (E-B) were derived. OCT of normal and keratoconic eyes from an earlier study were compared with the data of the ectasia eyes. Curvature and aberrometry of the A-E interfaces were statistically similar between SI and OCT. However, OCT revealed a steeper and more aberrated E-B interface than A-E though correlation between them was inferior to the correlation for keratoconic eyes. Furthermore, the magnitude of differences between the A-E and E-B interfaces was greater in the ectasia eyes than the keratoconic eyes. OCT could possibly assist better in selecting appropriate treatment plan for postrefractive surgery ectasia eyes than conventional tomographers.
Assuntos
Córnea/diagnóstico por imagem , Córnea/cirurgia , Dilatação Patológica/diagnóstico por imagem , Dilatação Patológica/etiologia , Complicações Pós-Operatórias/diagnóstico por imagem , Procedimentos Cirúrgicos Refrativos/efeitos adversos , Tomografia de Coerência Óptica , Humanos , Complicações Pós-Operatórias/etiologiaRESUMO
OCT (optical coherence tomography) of corneal layers was generated to analyze the remodeling of the epithelium and stroma after photorefractive keratectomy (PRK). Myopic PRK was performed in 15 patients. One eye underwent manual scraping of epithelium while the other was treated with Epi clear. Epi clear allowed a gentler removal of the epithelium compared to manual scraping. Scheimpflug (Pentacam, OCULUS Optikgerate Gmbh, Wetzlar, Germany) and OCT (RTVue, Optovue Inc., Fremont, California, USA) scans of the cornea were performed before and after PRK (3 months). The OCT scanner and Pentacam acquired 8 and 25 radial 2-D scans of the cornea, respectively. The results showed similar topographic changes on the anterior corneal surface between Scheimpflug and OCT imaging. The curvature of the underlying anterior surface of the stroma after PRK was similar to the anterior corneal surface (air-epithelium interface), when measured with OCT. Aberrometric changes were mostly similar between Scheimpflug and OCT. However, Scheimpflug imaging reported greater changes in spherical aberration and corneal higher order aberrations than OCT after PRK. This is the first study to quantify the curvatures of the stromal layers with OCT after PRK. New insights were gained, which could be useful for refinement of surgical ablation algorithms, refractive procedures and detection of ectasia.
Assuntos
Córnea/diagnóstico por imagem , Córnea/patologia , Ceratectomia Fotorrefrativa , Tomografia de Coerência Óptica , Adulto , Córnea/cirurgia , Substância Própria/diagnóstico por imagem , Substância Própria/patologia , Epitélio/diagnóstico por imagem , Epitélio/patologia , Feminino , Humanos , Masculino , Miopia/diagnóstico por imagem , Miopia/patologia , Miopia/cirurgia , Período Pré-Operatório , Resultado do TratamentoRESUMO
Purpose: To simulate deformation amplitude after laser-assisted in situ keratomileusis (LASIK), small incision lenticule extraction (SMILE), and photorefractive keratectomy (PRK) with finite element models. Methods: Finite element simulations of air-puff applanation on LASIK, SMILE, and PRK models were performed on a cohort of normal eyes, which had undergone refractive treatments. Short- and long-term wound healing responses were considered for SMILE and LASIK models based on evidence of microdistortions in Bowman's layer and crimping of collagen fibers. First, inverse simulations were performed to derive the preoperative properties of the cornea. Using these properties and planned refractive treatment, postoperative air-puff deformation amplitude was predicted and compared with the in vivo measurements. Results: The predicted postoperative corneal stiffness parameters agreed very well with in vivo values of SMILE, LASIK, and PRK eyes. Intraclass correlations (ICC) were greatest in PRK eyes (ICC > 0.95). This agreement was lower for peak deformation amplitude and peak deflection amplitude in SMILE and LASIK eyes (ICC < 0.9). In PRK eyes, peak deformation and deflection amplitude predictions were the best relative to in vivo magnitudes. Also, linear correlation (r) between in vivo measurement and predicted biomechanical parameters indicated strong agreement between them (SMILE: r ≥ 0.89, LASIK: r ≥ 0.83, PRK: r ≥ 0.87). Conclusions: The is the first study to present predictive simulations of corneal deformation changes after different procedures. Patient-specific preoperative corneal biomechanical properties and finite element models were a significant determinant of accurate postoperative deformation amplitude prediction.
Assuntos
Ar , Córnea/fisiopatologia , Cirurgia da Córnea a Laser , Elasticidade/fisiologia , Ceratomileuse Assistida por Excimer Laser In Situ/métodos , Miopia/cirurgia , Ceratectomia Fotorrefrativa/métodos , Adulto , Topografia da Córnea , Análise de Elementos Finitos , Humanos , Lasers de Excimer/uso terapêutico , Miopia/fisiopatologia , Estudos RetrospectivosRESUMO
PURPOSE: To assess the correlation between corneal biomechanical stiffness and refractive error (RE) in the pediatric population. METHODS: A total of 733 pediatric eyes were included in the study retrospectively. All eyes underwent corneal tomography (Pentacam), RE assessment, and air-puff deformation (Corvis-ST). Waveform analyses of deformation provided corneal stiffness (CS) and extraocular tissue stiffness (EOS). Eyes were subgrouped into emmetropia [manifest refraction spherical equivalent (MRSE) â¼ 0 D], hyperopia (MRSE > 0 D), myopia I (MRSE between 0 D and -3 D), myopia II (MRSE between -3 D and -6 D), and myopia III (MRSE greater than -6 D) for multivariate analyses. Ocular biometry variables [age, intraocular pressure (IOP), central corneal thickness (CCT), corneal astigmatism, anterior chamber depth, and RE] were used as covariates. The apparent elastic modulus (E) was defined as the ratio of CS and CCT. RESULTS: All groups had similar age, CCT, and IOP (P > 0.05). CS was the only parameter to differ between all the grades of myopia (P < 0.0001). CS was lower by 3.72%, 6.84%, and 10.68% in myopia I, II, and III eyes, respectively, relative to emmetropic eyes. EOS increased by 11.15%, 22.60%, and 28.5%, respectively. Multivariate regression revealed age, IOP, CCT, corneal astigmatism, anterior chamber depth, and RE as significant predictors of CS, with a high coefficient of regression (R = 0.66). Corneal E negatively correlated with the grade of myopia. CONCLUSIONS: CS and EOS correlated negatively and positively with the grade of myopia, respectively. Ocular biometry variables were significant predictors of both CS and EOS. The decrease in CS was attributed to that in elastic modulus.
Assuntos
Córnea/fisiologia , Elasticidade/fisiologia , Hiperopia/fisiopatologia , Miopia/fisiopatologia , Adolescente , Fenômenos Biomecânicos , Biometria , Criança , Estudos Transversais , Humanos , Pressão Intraocular/fisiologia , Refração Ocular/fisiologia , Estudos Retrospectivos , Acuidade Visual/fisiologiaRESUMO
PURPOSE: To evaluate the performance of different customized corneal cross-linking (CXL) methods. METHODS: This was a single-center interventional, prospective, longitudinal case series. Four different customized CXL methods were evaluated in keratoconic eyes: (1) uniform (uniform intensity ultraviolet-A [UVA] beam [9 mW/cm2] for 10 minutes) (n = 12 eyes); (2) sector axial map (sector-based UVA irradiation) (n = 12 eyes); (3) ring axial map (concentric rings of UVA beam intensity centered at the steepest curvature of the anterior axial map) (n = 12 eyes); and ring tangential map (same as the ring axial map but centered at the steepest curvature of the anterior tangential map) (n = 14 eyes). Peak UVA energy density in the sector and ring axial map (and ring tangential map) protocols did not exceed 15.0 and 10.8 J/cm2, respectively. A 0.1% riboflavin solution was applied after epithelium removal. Corneal tomography and visual acuity were assessed before and 6 months after CXL. RESULTS: Average and peak energy density was lowest in the ring tangential protocol and highest in the sector axial map group (P < .001). Treated area was lowest in the ring tangential map group and highest in the uniform group (P < .001). Decrease in curvature was similar among the uniform, sector axial map, and ring axial map groups (P < .05). The ring tangential map group had the greatest decrease in curvature per unit energy dose to the cornea (P < .05). Improvement in uncorrected (0.081 ± 0.056 logMAR) and corrected (0.041 ± 0.026 logMAR) distance visual acuity per unit energy density was greatest in the ring tangential map group (P > .05). CONCLUSIONS: When normalized to the average energy density, the ring tangential map protocol appeared to provide maximum flattening and improvement in visual acuity. Further studies with larger sample sizes are needed to validate the findings of this pilot study. [J Refract Surg. 2017;33(10):676-682.].