EUSEDcollab: a network of data from European catchments to monitor net soil erosion by water.

As a network of researchers we release an open-access database (EUSEDcollab) of water discharge and suspended sediment yield time series records collected in small to medium sized catchments in Europe. EUSEDcollab is compiled to overcome the scarcity of open-access data at relevant spatial scales for studies on runoff, soil loss by water erosion and sediment delivery. Multi-source measurement data from numerous researchers and institutions were harmonised into a common time series and metadata structure. Data reuse is facilitated through accompanying metadata descriptors providing background technical information for each monitoring station setup. Across ten European countries, EUSEDcollab covers over 1600 catchment years of data from 245 catchments at event (11 catchments), daily (22 catchments) and monthly (212 catchments) temporal resolution, and is unique in its focus on small to medium catchment drainage areas (median = 43 km2, min = 0.04 km2, max = 817 km2) with applicability for soil erosion research. We release this database with the aim of uniting people, knowledge and data through the European Union Soil Observatory (EUSO).

Gas Porosimetry by Gas Adsorption as an Efficient Tool for the Assessment of the Shaping Effect in Commercial Zeolites.

A set of three commercial zeolites (13X, 5A, and 4A) of two distinct shapes have been characterized: (i) pure zeolite powders and (ii) extruded spherical beads composed of pure zeolite powders and an unknown amount of binder used during their preparation process. The coupling of gas porosimetry experiments using argon at 87 K and CO2 at 273 K allowed determining both the amount of the binder and its effect on adsorption properties. It was evidenced that the beads contain approximately 25 wt% of binder. Moreover, from CO2 adsorption experiments at 273 K, it could be inferred that the binder present in both 13X and 5A zeolites does not interact with the probe molecule. However, for the 4A zeolite, pore filling pressures were shifted and strong interaction with CO2 was observed leading to irreversible adsorption of the probe. These results have been compared to XRD, IR spectroscopy, and ICP-AES analysis. The effect of the binder in shaped zeolite bodies can thus have a crucial impact on applications in adsorption and catalysis.

Quantification of tributaries contributions using a confluence-based sediment fingerprinting approach in the Canche river watershed (France).

Since a few years, land use management aims to reduce and control water erosion processes in watersheds but there is a lack of quantitative information on the contribution of the sources of transported sediment. This is most important in agricultural areas where soils are sensitive to erosion. The geology of these areas is often characterized by large expanses of relatively homogeneous quaternary silts. The possibility of distinguishing the sources of erosion according to their geological substratum is thus very delicate. This information is important because its lack can lead to the mis-implementation of erosion control measures. To address this request, a confluence-based sediment fingerprinting approach was developed on the Canche river watershed (1274 km2; northern France), located in the European loess belt, an area that is affected by diffuse and concentrate erosion processes. Suspended particulate matter was collected during five seasonal sampling campaigns using sediment traps at the outlet of each tributary and confluence with the main stream of the Canche river. The final composite fingerprint was defined using physico-chemical and statistical analyses. The best tracer parameters for each tributary were selected using stepwise discriminant function analyses. These parameters were introduced into a mass balance mixing model incorporating Monte-Carlo simulations to represent the uncertainty. Estimates of the overall mean contributions from each tributary were quantified at different temporal scales. The annual sediment flux tributaries contributions range from 3 to 22% at the outlet of the Canche river, and annual sediment flux range from 0.87 to 40.7 kt yr-1. The Planquette and the Créquoise tributaries appear to be those producing the largest sediment flux. In contrast, tributaries with the highest number of erosion control on their area exhibit the lowest values of sediment flux. Our results indicate a positive impact of recent land management policies in the Canche river watershed.

Assessing temporal variability and controlling factors of the sediment budget of a small agricultural catchment in Northern France (the Pommeroye).

A high-frequency monitoring station was implemented at the outlet of the small catchment of the Pommeroye (0.54 km2) in Northern France to study erosion by runoff and hydro-sedimentological responses to heavy rainfall events in the context of Quaternary loess deposits. The aim of this experimental work is to assess the temporal variability of sediment yield and to identify the factors controlling the hydro-sedimentary response. To achieve this goal, statistical and hydro-sedimentary dynamic analyses were performed. During two years of monitoring (April 2016-April 2018), 48 flood events were recorded. The specific sediment yield (SSY) is highly variable and was evaluated to 29.4-70 t km-2 yr-1 which is conventional for the study region. Most of the sediment yield was produced in winter (55%) and autumn (42%). Only 3% of SSY were produced during spring and summer periods. According to our results, only 6% of the erosive events are responsible for the transport of more than 40% of the sediment flux recorded at the outlet. This underlines the temporal variability of the hydro-sedimentary production in small agricultural catchments for which most of the hydro-sedimentary flux is produced during a limited number of events. The results of statistical analyses show that the total amount of rainfall and the duration of a rainfall episode are the main controlling factors on the hydro-sedimentary response. Our results also suggest that the rainfall kinetic energy better reflects the sediment detachment, and that the 48 h-antecedent rainfall is not linked to the hydro-sedimentary response.

Analyzing the uncertainty of diffusive gel-based passive samplers as tools for evaluating the averaged contamination of surface water by organic pollutants.

Agarose gel-based passive samplers are nowadays one of the most effective sampling devices able to provide a quantitative evaluation of water contamination level for a broad range of organic contaminants. These devices show significant improvements in comparison to the previous passive samplers dedicated to hydrophilic compounds because they tend to reduce the effect of hydrodynamic flow conditions on the uptake rate of compounds and thus subsequently to improve their accuracy. However, albeit their effects minimized, hydrodynamic water flow and temperature are reported as variables likely to change the uptake rate of compounds that may lead to some inaccuracy if they are not adequately taken into account. This work aims to investigate the magnitude of effects of such uncorrected variables on the bias of the deduced water contamination level. The analysis of the error structure shows that the uncertainty on the diffusivity of contaminants in agarose gel and its dependency on temperature are the most inferring factors. At 8 °C, these factors are, respectively, responsible of 34 and 33% of the squared uncertainty on the final deduced contamination level. The overall uncertainty for a single exposed passive sampler is in the order of 39% and drops to 23% if threesamplers are co-exposed (at 8 °C). Despite this uncertainty, we present results for a set of pesticides and personal care products throughout a field monitoring conducted over a 4-month period, which show the potential of passive samplers to allow assessing the temporal trend of water contamination.

Understanding and predicting the diffusivity of organic compounds in polydimethylsiloxane material for passive sampler applications using a simple quantitative structure-property relationship model.

The diffusivity of 145 compounds in polydimethylsiloxane (PDMS) material was determined in the laboratory using a film stacking technique. The results were pooled with available literature data, providing a final data set of 198 compounds with diffusivity (DPDMS ) spanning over approximately 5 log units. The principal variables controlling the diffusivity of penetrants were investigated by comparing DPDMS within and between different homologous series. The dipole moment, molecular size, and flexibility of penetrants appear to be the most prevalent factors controlling a compound's diffusivity. A nonlinear quantitative structure-property relationship is proposed using as predicting variables the molecular volume, the number of rotatable bonds, the topological polar surface area, and the number of O and N atoms. The final relationship has a correlation coefficient of R2 = 0.81 and a mean absolute error of 0.26 m2 s-1 (log unit), approaching the average error for the experimentally determined values (0.12 m2 s-1 ). The model, based on a heuristic approach, is ready for use by analytical chemists with no specific background in theoretical chemistry (notably for passive sampler development). Environ Toxicol Chem 2018;37:1291-1300. © 2018 SETAC.

Calibration and response of an agarose gel based passive sampler to record short pulses of aquatic organic pollutants.

A passive sampler inspired from previous devices was developed for the integrative sampling of a broad range of contaminants in the water column. Our primary objective was to improve the performance of the device to provide accurate and averaged pollutant water concentrations. For this purpose, an agarose diffusive gel was used as the boundary layer that drives the analyte uptake rate. Contrary to conventional passive samplers, the developed device does not require the sampling rates to be corrected for exposure conditions (e.g. hydrodynamic flow) because the diffusive gel boundary layer selected was sufficiently large to control the pollutant diffusion rate from the aqueous phase. The compounds diffusion coefficients in agarose gel and the gel thickness are the only required data to accurately calculate the time weighted averaged water concentration of pollutants. The performance of the developed sampler was evaluated in the laboratory under two contamination scenarios and in the field in 8 contrasting exposure sites for a selection of 16 emerging pollutants and pesticides. The results show that detection limits of this method are environmentally relevant and allow the determination of the averaged pollutant concentrations. Additionally, the ability of the device to sense very short contamination pulses (5-320min) was evaluated through a theoretical approach and laboratory tests. Results show that the device is suitable for sampling contamination pulses as short as 5min without deviation from the actual average concentrations of pollutants.

Clinical and microbiological responses of volunteers to combined intranasal and oral inoculation with a Streptococcus gordonii carrier strain intended for future use as a group A streptococcus vaccine.

Streptococcus gordonii shows promise as a live mucosal vaccine vector for immunization against respiratory pathogens. In preparation for clinical trials to evaluate S. gordonii engineered to express group A streptococcal M protein antigens, we characterized the responses of 150 healthy volunteers to combined nasal and oral inoculation with approximately 1.5 x 10(9) CFU of SP204(1-1), an S. gordonii strain not bearing vaccine antigens. SP204(1-1) was selected for resistance to streptomycin and 5-fluoro-2-deoxyuridine to distinguish it from indigenous flora. In two antibiotic treatment studies, we performed serial culturing of nose, mouth, and saliva samples from 120 subjects treated with azithromycin beginning 5 days after inoculation to determine whether SP204(1-1) could be rapidly eliminated should safety concerns arise. A natural history study was performed to assess the time until spontaneous eradication in the remaining 30 subjects, who did not receive the antibiotic and who were monitored with repeated culturing for 14 weeks after inoculation. SP204(1-1) was generally well tolerated. Symptoms reported most often within 5 days of inoculation were nasal congestion (36%), headache (30%), and sore throat (19%). The strain was detected by culturing in 98% of subjects. A single dose of azithromycin eliminated colonization in 95% of subjects; all subjects receiving a 5-day course of an antibiotic showed clearance by day 11. Without the antibiotic, 82% of subjects showed spontaneous eradication of the implanted strain within 7 days, and all showed clearance by 35 days. The results of these clinical trials provide encouragement that the use of S. gordonii as a live mucosal vaccine vector is a feasible strategy.

Analysis of factors affecting surface expression and immunogenicity of recombinant proteins expressed by gram-positive commensal vectors.

Several key protein structural attributes were altered in an effort to optimize expression and immunogenicity of a foreign protein (M protein from Streptococcus pyogenes) exposed on the surface of Streptococcus gordonii commensal bacterial vectors: (i) a shorter N-terminal region, (ii) the addition of a 94-amino-acid spacer, and (iii) the addition of extra C-repeat regions (CRR) from the M6 protein. A decrease in the amount of cell surface M6 was observed upon deletion of 10 or more amino acid residues at the N terminus. On the other hand, reactivity of monoclonal antibody to surface M6 increased with the addition of the spacer adjacent to the proline- and glycine-rich region, and an increase in epitope dosage was obtained by adding another CRR immediately downstream of the original CRR. The results obtained should facilitate the design of improved vaccine candidates using this antigen delivery technology.