Structural changes of layered alkylsiloxanes during the reversible melting-solidification process.

Through various in situ analyses, we have revealed the structural changes that occur during the reversible melting-solidification process of layered alkylsiloxanes (CnLSiloxanes) with carbon numbers (n) of 18 and 16. In situ high-resolution solid-state (13)C nuclear magnetic resonance (NMR) analysis at controlled temperatures indicates drastic conformational changes of the long alkyl chains during the melting-solidification process. A (13)C NMR signal at 33 ppm, which shows the highest intensity at room temperature (RT), is assigned to an inner methylene group with an all-trans conformation. As the temperature increases, the 33-ppm signal intensity decreases while the signal intensity at 30.5 ppm simultaneously increases. The 30.5 ppm signal is assigned to an inner methylene group with a trans-gauche conformation. Subsequently, upon cooling, the signal at 33 ppm recovers, even after CnLSiloxanes have melted. In situ X-ray diffraction measurements at controlled temperatures reveal that the ordered arrangement of the long alkyl chains becomes disordered with elevating temperatures and reordered upon cooling to RT. In situ high-resolution solid-state (29)Si NMR analysis shows that the melting-solidification process progresses without any structural change in siloxane sheets of the CnLSiloxanes. Thus, the in situ analyses show that disordering of the long alkyl chains causes the CnLSiloxanes to melt. Because the majority of long alkyl chains are packed again in the ordered arrangement with the all-trans conformation upon cooling, the CnLSiloxanes are reversibly solidified and the CnLSiloxane structure is recovered.

Adsorption of amino acids by fullerenes and fullerene nanowhiskers.

We have investigated the adsorption of some amino acids and an oligopeptide by fullerene (C60) and fullerene nanowhiskers (FNWs). C60 and FNWs hardly adsorbed amino acids. Most of the amino acids used have a hydrophobic side chain. Ala and Val, with an alkyl chain, were not adsorbed by the C60 or FNWs. Trp, Phe and Pro, with a cyclic structure, were not adsorbed by them either. The aromatic group of C60 did not interact with the side chain. The carboxyl or amino group, with the frame structure of an amino acid, has a positive or negative charge in solution. It is likely that the C60 and FNWs would not prefer the charged carboxyl or amino group. Tri-Ala was adsorbed slightly by the C60 and FNWs. The carboxyl or amino group is not close to the center of the methyl group of Tri-Ala. One of the methyl groups in Tri-Ala would interact with the aromatic structure of the C60 and FNWs. We compared our results with the theoretical interaction of 20 bio-amino acids with C60. The theoretical simulations showed the bonding distance between C60 and an amino acid and the dissociation energy. The dissociation energy was shown to increase in the order, Val < Phe < Pro < Asp < Ala < Trp < Tyr < Arg < Leu. However, the simulation was not consistent with our experimental results. The adsorption of albumin (a protein) by C60 showed the effect on the side chains of Try and Trp. The structure of albumin was changed a little by C60. In our study Try and Tyr were hardly adsorbed by C60 and FNWs. These amino acids did not show a different adsorption behavior compared with other amino acids. The adsorptive behavior of mono-amino acids might be different from that of polypeptides.

Ambipolar to Unipolar Conversion in C70/Ferrocene Nanosheet Field-Effect Transistors.

Organic cocrystals, which are assembled by noncovalent intermolecular interactions, have garnered intense interest due to their remarkable chemicophysical properties and practical applications. One notable feature, namely, the charge transfer (CT) interactions within the cocrystals, not only facilitates the formation of an ordered supramolecular network but also endows them with desirable semiconductor characteristics. Here, we present the intriguing ambipolar CT properties exhibited by nanosheets composed of single cocrystals of C70/ferrocene (C70/Fc). When heated to 150 °C, the initially ambipolar monoclinic C70/Fc nanosheet-based field-effect transistors (FETs) were transformed into n-type face-centered cubic (fcc) C70 nanosheet-based FETs owing to the elimination of Fc. This thermally induced alteration in the crystal structure was accompanied by an irreversible switching of the semiconducting behavior of the device; thus, the device transitions from ambipolar to unipolar. Importantly, the C70/Fc nanosheet-based FETs were also found to be much more thermally stable than the previously reported C60/Fc nanosheet-based FETs. Furthermore, we conducted visible/near-infrared diffuse reflectance and photoemission yield spectroscopies to investigate the crucial role played by Fc in modulating the CT characteristics. This study provides valuable insights into the overall functionality of these nanosheet structures.

Nanocomposites of Fe(II)-Based Metallo-Supramolecular Polymer and a Layered Inorganic-Organic Hybrid for Improved Electrochromic Materials.

Fe-based metallo-supramolecular polymer (polyFe), composed of Fe(II) ions and bis(terpyridyl)benzene, is known as a good electrochromic (EC) material. For the first time, to improve the EC properties, we prepared nanocomposites comprising polyFe and a layered inorganic-imidazoline covalently bonded hybrid (LIIm) by simply mixing them in methanol and then examined the effect of the nanocomposition on EC properties. The obtained blue/purple-colored composites (polyFe/LIIm composites) were demonstrated by scanning electron microscopy (SEM) to comprise a structure of LIIm nanoparticles coated with amorphous polyFe. Interestingly, X-ray diffraction (XRD) measurements suggested that there was no intercalation of polyFe in the interlayer space of LIIm. Ultraviolet-visible (UV-vis) spectroscopy measurements demonstrated that light absorption close to 600 nm was attributed to metal-to-ligand charge transfer (MLCT) from the Fe(II) ion to the bisterpyridine ligand and was influenced by LIIm in the composites. The composites exhibited a pair of redox waves, assigned to the redox between Fe(II) and Fe(III), in the cyclic voltammograms; moreover, the composites were estimated to be diffusion controlled. Thin composite films demonstrated reversible EC changes, triggered by the redox reaction of the metal. Furthermore, the results show that the nano-scale composition of the metallo-supramolecular polymers with LIIm can effectively improve the memory properties without reducing the contrast in transmittance (ΔT) of 70-76% in EC changes after applying 1.2 V vs. Ag/Ag+. The EC properties varied with varying ratios (3/0.1, 0.5, 1, and 5) of the polyFe/LIIm, and the ratio of 3/1 exhibited the longest memory and largest MLCT absorption peak among composites. The results show that the polyFe/LIIm composites are useful EC materials for dimming glass applications, such as smart windows.

Fullerene C70/porphyrin hybrid nanoarchitectures: single-cocrystal nanoribbons with ambipolar charge transport properties.

In recent years, supramolecular cocrystals containing organic donors and acceptors have been explored as active components in organic field-effect transistors (FETs). Herein, we report the synthesis of novel single-cocrystal nanoribbons with ambipolar charge transport characteristics from C70 and 5,10,15,20-tetrakis(3,5-dimethoxyphenyl)porphyrin (3,5-TPP) in a 3 : 2 ratio. The C70/3,5-TPP nanoribbons exhibited a new strong absorption band in the near-infrared region, indicating the presence of charge-transfer interactions between C70 and 3,5-TPP in the cocrystals. We elucidated the mechanism of the charge-transport properties of the nanoribbons using photoemission yield spectroscopy in air and theoretical calculations. A strong interaction between porphyrins in the one-dimensional porphyrin chains formed in C70/3,5-TPP nanoribbons, which was confirmed by single-crystal X-ray diffraction, plays a crucial role in their hole transport properties.

Langmuir monolayers of a cholesterol-armed cyclen complex that can control enantioselectivity of amino acid recognition by surface pressure.

The cholesterol-armed cyclen Na(+) complex formed stable Langmuir monolayers at the air-water interface. The π-A isotherm displayed a reasonable limiting molecular area of ∼1.57 nm(2) and the areas expanded when amino acids were dissolved in water, indicating the efficient accommodation in the monolayers. Brewster angle microscopy (BAM) images exhibited almost no defects of the compressed Langmuir monolayers regardless of the presence of amino acids. Based on the idea that the increase in the limiting molecular areas corresponds to the amount of the adsorbed amino acid, the binding constants of three enantiomeric amino acids, namely valine (Val), leucine (Leu), and phenylalanine (Phe), were calculated at different surface pressures. Remarkably, a surface pressure dependent enantioselectivity of amino acid recognition was observed. Upon compression of the monolayers, the binding constants of amino acids increased accompanying an inversion of chiral selectivity from the D- to L-form in the case of Val and, conversely, from L- to D-form in the case of Phe.

Mechanical control of enantioselectivity of amino acid recognition by cholesterol-armed cyclen monolayer at the air-water interface.

Monolayers of the cholesterol-armed cyclen Na+ complex at the air-water interface display a remarkable, surface pressure dependent enantioselectivity of amino acid recognition. Upon compression of the monolayer, the binding constants of amino acids increase accompanying an inversion of chiral selectivity from the d- to l-form in the case of valine.