Core-Shell Polyvinyl Alcohol (PVA) Base Electrospinning Microfibers for Drug Delivery.

In this study, electrospun membranes were developed for controlled drug release applications. Both uniaxial Polyvinyl alcohol (PVA) and coaxial fibers with a PVA core and a poly (L-lactic acid) (PLLA) and polycaprolactone (PCL) coating were produced with different coating structures. The best conditions for the manufacture of the fibers were also studied and their morphology was analyzed as a function of the electrospinning parameters. Special attention was paid to the fiber surface morphology of the coaxial fibers, obtaining both porous and non-porous coatings. Bovine serum albumin (BSA) was used as the model protein for the drug release studies and, as expected, the uncoated fibers were determined to have the fastest release kinetics. Different release rates were obtained for the coated fibers, which makes this drug release system suitable for different applications according to the release time required.

Influence of the Inclusion of Propylene Carbonate Electrolyte Solvent on the Microstructure and Thermal and Mechanical Stability of Poly(l-lactic acid) and Poly(vinylidene fluoride-co-hexafluoropropylene) Battery Separator Membranes.

The influence of the inclusion of the organic solvent propylene carbonate (PC) in microporous membranes based on poly(l-lactic acid) (PLLA) and poly(vinylidene fluoride-co-hexafluoropropylene) P(VDF-HFP) has been studied based on its relevance for the application of those separator membranes in lithium-ion batteries. The membranes have been produced through solvent casting and characterized with respect to the swelling ratio originated by the uptake of the organic solvent. The organic solvent uptake affects the porous microstructure and crystalline phase of both membrane types. The organic solvent uptake amount affects the crystal size of the membranes as a consequence of the interaction between the solvent and the polymer, since the presence of the solvent modifies the melting process of the polymer crystals due to a freezing temperature depression effect. It is also shown that the organic solvent partially penetrates into the amorphous phase of the polymer, leading to a mechanical plasticizing effect. Thus, the interaction between the organic solvent and the porous membrane is essential to properly tailor membrane properties, which in turn will affect lithium-ion battery performance.

Active methods in electricity and magnetism courses: Influence of degree, academic level and gender on student performance.

The performance of first-year students in electromagnetism (E&M) courses of different engineering degrees at a Spanish public university was measured using the Brief Electricity and Magnetism Assessment (BEMA), a standard research-based instrument to assess students' understanding after attending introductory courses in electricity and magnetism. In all cases, Flipped classroom (FC) built on information and communications technology was used. The objective of this paper is to analyse if the gain in the BEMA pre and post-test results is influenced by several factors such as the degree, the students' academic grade, and gender. Moreover, as some studies have shown that the students' retention of the concepts was significantly stronger in active learning than in traditional approaches, a third BEMA test was performed by the students to analyse the long-term retention gain dependence on the same factors. Students from different engineering degree programs were asked to complete two BEMA tests during the course and a third one after a few months. ANOVA tests were used to analyse the existence of significant differences in gain between student degree programs, student academic level and student gender. Results have shown no differences in the BEMA performance by degree program, but significant differences were found by academic level and gender. Retention did not depend on the degree course but on the academic level. Mean gain value by academic level, and gender was obtained and concluded that the best students presented the best gain results and that gain depends on the students' gender: males outperformed females in the BEMA tests, although there were no significant differences in the course grades. It is thus necessary to understand these differences and to implement measures in daily teaching work to improve women's performance.

Role of Electrospinning Parameters on Poly(Lactic-co-Glycolic Acid) and Poly(Caprolactone-co-Glycolic acid) Membranes.

Poly(lactic-co-glycolic acid) (PLGA) and poly(caprolactone-co-glycolic acid) (PCLGA) solutions were electrospun into membranes with tailored fiber diameter of 1.8 µm. This particular fiber diameter was tuned depending on the used co-polymer by adjusting the electrospinning parameters that mainly influence the fiber diameter. The greatest setting of the fiber diameter was achieved by varying the polymer solution parameters (polymer concentration, solvents and solvents ratio). PLGA was adequately electrospun with 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), whereas PCLGA required a polar solvent (such as chloroform) with a lower dielectric constant. Moreover, due to the amorphous morphology of PCLGA, pyridine as salt had to be added to the starting solution to increase its conductivity and make it electrospinnable. Indeed, the electrospinning of this co-polymer presents notable difficulties due to its amorphous structure. Interestingly, PCLGA, having a higher glycolic acid molar fraction than commonly electrospun co-polymers (caprolactone:glycolic acid ratio of 45:55 instead of 90:10), could be successfully electrospun, which has not been reported to date. To an accurate setting of fiber diameter, the voltage and the distance from needle to collector were varied. Finally, the study of the surface tension, conductivity and viscosity of the polymer solutions allowed to correlate these particular characteristics of the solutions with the electrospinning variables so that prior knowledge of them enables predicting the required processing conditions.

An innovative bioresorbable gelatin based 3D scaffold that maintains the stemness of adipose tissue derived stem cells and the plasticity of differentiated neurons.

Neural tissue engineering aims at producing a simulated environment using a matrix that is suitable to grow specialized neurons/glial cells pertaining to CNS/PNS which replace damaged or lost tissues. The primary goal of this study is to design a compatible scaffold that supports the development of neural-lineage cells which aids in neural regeneration. The fabricated, freeze-dried scaffolds consisted of biocompatible, natural and synthetic polymers: gelatin and polyvinyl pyrrolidone. Physiochemical characterization was carried out using Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) imaging. The 3D construct retains good swelling proficiency and holds the integrated structure that supports cell adhesion and proliferation. The composite of PVP-gelatin is blended in such a way that it matches the mechanical strength of the brain tissue. The cytocompatibility analysis shows that the scaffolds are compatible and permissible for the growth of both stem cells as well as differentiated neurons. A change in the ratios of the scaffold components resulted in varied sizes of pores giving diverse surface morphology, greatly influencing the properties of the neurons. However, there is no change in stem cell properties. Different types of neurons are characterized by the type of gene associated with the neurotransmitter secreted by them. The change in the neuron properties could be attributed to neuroplasticity. The plasticity of the neurons was analyzed using quantitative gene expression studies. It has been observed that the gelatin-rich construct supports the prolonged proliferation of stem cells and multiple neurons along with their plasticity.

Electrospun PVA/Bentonite Nanocomposites Mats for Drug Delivery.

Electrospun mats and films of polyvinyl alcohol (PVA) hydrogel are produced for drug delivery. To provide mechanical consistency to the gel a reinforcement by nanoclays is introduced in the polymer matrix. Four different suspensions of nanoparticles in the polymer solution are prepared in an adequate solvent. These suspensions are subjected to an electrospinning process to produce the nanofiber mat, while films are produced by casting. The influence of the process parameters over the nanofibers microstructure is analyzed by scanning electron microscopy (SEM). The effectiveness of nanoclay encapsulation in the nanocomposites is tested by a thermogravimetric analysis. A crosslinking reaction in solution is carried out to prevent the dissolution of the nanocomposites in aqueous media. A model protein (bovine serum albumin, BSA) is absorbed in the nanocomposites to characterize the release kinetics in phosphate-buffered saline (PBS).

In vivo evaluation of 3-dimensional polycaprolactone scaffolds for cartilage repair in rabbits.

BACKGROUND: Cartilage tissue engineering using synthetic scaffolds allows maintaining mechanical integrity and withstanding stress loads in the body, as well as providing a temporary substrate to which transplanted cells can adhere. PURPOSE: This study evaluates the use of polycaprolactone (PCL) scaffolds for the regeneration of articular cartilage in a rabbit model. STUDY DESIGN: Controlled laboratory study. METHODS: Five conditions were tested to attempt cartilage repair. To compare spontaneous healing (from subchondral plate bleeding) and healing due to tissue engineering, the experiment considered the use of osteochondral defects (to allow blood flow into the defect site) alone or filled with bare PCL scaffold and the use of PCL-chondrocytes constructs in chondral defects. For the latter condition, 1 series of PCL scaffolds was seeded in vitro with rabbit chondrocytes for 7 days and the cell/scaffold constructs were transplanted into rabbits' articular defects, avoiding compromising the subchondral bone. Cell pellets and bare scaffolds were implanted as controls in a chondral defect. RESULTS: After 3 months with PCL scaffolds or cells/PCL constructs, defects were filled with white cartilaginous tissue; integration into the surrounding native cartilage was much better than control (cell pellet). The engineered constructs showed histologically good integration to the subchondral bone and surrounding cartilage with accumulation of extracellular matrix including type II collagen and glycosaminoglycan. The elastic modulus measured in the zone of the defect with the PCL/cells constructs was very similar to that of native cartilage, while that of the pellet-repaired cartilage was much smaller than native cartilage. CONCLUSION: The results are quite promising with respect to the use of PCL scaffolds as aids for the regeneration of articular cartilage using tissue engineering techniques.