The "puffed cheek method" to evaluate mucosal thickness: case series.

OBJECTIVES: Mucosal thickness should be considered in implant treatment planning. Needle probing to measure mucosal thickness is invasive and therefore not used in routine diagnosis. The "puffed cheek" method is an established technique to visualize the vestibule in computed tomography (CT). As CT assesses bone availability, a simultaneous mucosal thickness measurement would be useful. The aim of this study was to evaluate the reliability of mucosal thickness measurement in CT with distended cheeks. MATERIALS AND METHODS: Buccal maxillary mucosa thickness was evaluated at four measurement sites in the incisor and molar area of 11 patients. Each site was evaluated via CT with cheek distension and needle probing. Measurement area was identified with the aid of a thermoplastic splint to localize the exact position by a gutta-percha marker point. The comparison between the two methods was performed by Bland-Altman diagram. RESULTS: The mean clinical thickness was 1.17 mm (±0.31) compared to 1.11 mm (±0.31) in CT evaluation. The mean difference between the two methods was 0.07 mm (±0.40; CI-0.14;0.12, P = 0.88, Krippendorff α = 0.38). According to Bland-Altman diagram the mucosal thickness may diverge by up to 0.9 mm from the radiologic thickness. CONCLUSIONS: The two measurement methods may not be interchangeably used. As additional information to three-dimensional bone analyses, CT may be performed as a pre-operative soft tissue analysis at most implant sites with distended cheeks. Nevertheless, this method yields less valid and reliable results than the gold standard.

Osteometry of the mandible performed using dental MR imaging.

BACKGROUND AND PURPOSE: On cross-sectional and panoramic reformatted images from axial (dental) CT scans of the mandible it may be difficult to identify the inferior alveolar neurovascular bundle (IANB) in patients lacking a clear-cut bony delimitation of the mandibular canal. Dental MR images are comparable to dental CT scans, which directly show the IANB; however, measurements of length may not be reliable owing to susceptibility artifacts and field inhomogeneities in the oral cavity. Therefore, the accuracy of length measurements on dental MR images was compared with that on dental CT scans and direct osteometry. METHODS: Dental T1-weighted MR imaging using a high-resolution turbo gradient-echo sequence and dental CT were performed in six anatomic specimens. The axial scans were reformatted as panoramic and cross-sectional reconstructions on a workstation and characteristic cross sections were obtained from all mandibles. The longest axis in the bucco-lingual and apico-basal directions, the distances from the top of the mandibular canal to the top of the alveolar ridge and from the bottom of the mandibular canal to the base of the mandible, and the diameter of the bone cortex at the alveolar ridge were measured with direct osteometry on the cross sections and compared with measurements on corresponding MR and CT reformatted images. RESULTS: The correlation between direct osteometry and dental MR and CT was strong, except for the bone cortex diameter at the top of the alveolar ridge, where only a moderate correlation was found. Means of comparable length measurements were not significantly different among the three methods. CONCLUSION: The accuracy of length measurements in the jaw bones obtained using dental MR is comparable to that of dental CT and is not significantly different from direct osteometry. Thus, dental MR is a potential alternative to CT for dental imaging.

Temperature dependence of HU values for various water equivalent phantom materials.

The temperature dependence of water equivalent phantom materials used in radiotherapy and diagnostic imaging has been investigated. Samples of phantom materials based on epoxy resin, polyethylene, a polystyrene-polypropylene mixture and commercially available phantom materials (Solid Water, Gammex RMI and Plastic Water, Nuclear Associates) were scanned at temperatures from 15 to 40 degrees C and HU values determined. At a reference temperature of 20 degrees C materials optimized for CT applications give HU values close to zero while the commercial materials show an offset of 119.77 HU (Plastic Water) and 27.69 HU (Solid Water). Temperature dependence was lowest for epoxy-based materials (EPX-W: -0.23 HU degrees C(-1); Solid Water: -0.25 HU degrees C(-1)) and highest for a polyethylene-based material (X0: -0.72 HU degrees C(-1)). A material based on a mixture of polystyrene and polypropylene (PSPPI: -0.27 HU degrees C(-1)) is comparable to epoxy-based materials and water (-0.29 HU degrees C(-1)).

Optimization of the composition of phantom materials for computed tomography.

Using available data for photon attenuation and tissue composition, a computer code was developed for the optimization of the composition of phantom materials for diagnostic radiology. The code allows selection of attenuation data in a photon energy range from 1 to 150 keV and the choice of a suitable weight function in the energy interval chosen. For applications in CT imaging a weight function is available reflecting the contribution of the x-ray spectrum to the CT-signal. Several phantom materials for CT were optimized (body fat, trabecular bone, an average bone composition for C4 vertebrae and water) by varying the mineral components in a polymer base in order to adjust x-ray attenuation properties. Measurements with the water equivalent material (PSPP1) showed good agreement of calculated and measured HU values (AHU = 7.3 +/- 5.3 at 80 kVp and 4.0 +/- 2.7 at 140 kVp) and little variation of HU for tube voltages from 80 to 140 kVp. The method provides a fast and flexible means for obtaining optimized phantom materials for a large variety of tissue compositions and energy ranges.

[A simple method for estimating effective dose in dental CT. Conversion factors and calculation examples for a clinical low dose protocol]. / Eine einfache Methode zur Abschätzung der effektiven Dosis bei Dental-CT. Konversionsfaktoren und exemplarische Berechnung für ein klinisches Low-Dose-Protokoll.

PURPOSE: An easily applicable method to estimate effective dose including in its definition the high radiosensitivity of the salivary glands from dental computed tomography is presented. Effective doses were calculated for a markedly dose reduced dental CT protocol as well as for standard settings. Data are compared with effective doses from the literature obtained with other modalities frequently used in dental care. METHODS: Conversion factors based on the weighted Computed Tomography Dose Index were derived from published data to calculate effective dose values for various CT exposure settings. RESULTS: Conversion factors determined can be used for clinically used kVp settings and prefiltrations. With reduced tube current an effective dose for a CT examination of the maxilla of 22 microSv can be achieved, which compares to values typically obtained with panoramic radiography (26 microSv). A CT scan of the mandible, respectively, gives 123 microSv comparable to a full mouth survey with intraoral films (150 microSv). CONCLUSION: For standard CT scan protocols of the mandible, effective doses exceed 600 microSv. Hence, low dose protocols for dental CT should be considered whenever feasable, especially for paediatric patients. If hard tissue diagnoses is performed, the potential of dose reduction is significant despite the higher image noise levels as readability is still adequate.

[Occult fractures of the wrist joint: high resolution image magnification roentgen versus MRI]. / Okkulte Handgelenksfrakturen: Feinfokusvergrösserungsröntgen versus MRT.

PURPOSE: To compare the diagnostic value of high definition macroradiography and MRI in patients with the suspicion of occult wrist fractures. MATERIALS AND METHODS: In a prospective study, 23 patients with clinically suspected wrist fractures and normal initial plain radiographs underwent high resolution macroradiography and MR imaging shortly after trauma. Macroradiographs were taken with a microfocus tube using an anode of 0.03-0.3 mm providing a 4x magnification of the wrist, which was obtained in 4 projections. MR images were performed on a 1.0 T MR unit in coronal planes using T1 weighted SE, T2.-weighted 3D GE, and Turbo-STIR sequences. Follow-up radiographs after 6 weeks were used to confirm the diagnosis of a primary occult wrist fracture. RESULTS: Macroradiography depicted 5 wrist fractures: 4 fractures of the scaphoid bone and 1 fracture of the capitate bone. MRI demonstrated 11 fractures (one of them false-positive): 9 fractures of the scaphoid bone and two fractures of the capitate bone. Using macroradiography, the sensitivity for the detection of occult fractures of the wrist was 50% with a specificity of 100%, using MRI the sensitivity was 100% with a specificity of 92%. CONCLUSION: MRI seems to be superior to high resolution macroradiography in the detection of occult scaphoid fractures and thus is recommended in the management of patients with clinically suspected scaphoid fractures not evident on initial plain films.

[Dental magnetic resonance tomography (dental MRI) as a method for imaging maxillo-mandibular tooth retention structures]. / Dentale Magnetresonanztomographie (Dental-MRT) als Verfahren zur Darstellung des maxillo-mandibulären Zahnhalteapparates.

PURPOSE: To establish a new method for dental imaging using magnetic resonance tomography named Dental-MRT and to demonstrate its usefulness in diagnosing dentogen pathologies of the mandible and maxilla. METHODS: Seven healthy volunteers, three patients with pulpitis, two patients with dentigerous cysts, two patients after tooth transplantation, and three patients with atrophic mandibles have been evaluated. Optimized axial T1- and T2-weighted gradient echo and spin echo sequences in 2D and 3D technique have been established to perform studies of the jaws. The acquired images were reconstructed with a standard dental software package on a work-station as panorama and cross-sectional views of the mandible or maxilla. RESULTS: The entire maxillo-mandibular bone, teeth, dental pulp, and the content of the mandibular canal were well depicted. Patients with pulpitis demonstrate bone marrow edema in the periapical region. Dentigerous cysts and their relation to the surrounding structures are clearly shown. After contrast media administration marked enhancement of the dental pulp can be demonstrated. CONCLUSION: Dental-MRT promises to provide a new tool for visualization and detection of dental diseases.

Assessment of the blood supply to the mental region for reduction of bleeding complications during implant surgery in the interforaminal region.

Several life-threatening complications caused by hemorrhage that can occur during the placement of dental implants in the mandibular interforaminal region have been described in the literature. The aim of this study was to assess the vascular supply to this region and delineate the relative contribution and importance of the sublingual artery versus the submental artery. Thirty-four human cadavers were dissected. Special attention was directed to the presence of a branch of the submental artery that perforates the mylohyoid muscle and thus participates in the blood supply to the floor of the mouth together with the sublingual artery. A sublingual artery was found in 71% of the specimens. A large branch of the submental artery perforating the mylohyoid muscle was found in 41% of the specimens. The point of perforation was located an average of 31 mm posterior to the menton. The high risk of injuring the vessels of the floor of the mouth can be explained by the close vicinity of these vessels to the mandibular lingual cortical plate. To prevent complications in cases of unclear anatomic identification of the fossa sublingualis, preoperative lingual probing or elevation of the periosteum of the lingual aspect of the mandible is necessary. An alternative diagnostic procedure is precise preoperative noninvasive imaging (eg, computed tomography).

Computed tomographic diagnosis and localization of bone canals in the mandibular interforaminal region for prevention of bleeding complications during implant surgery.

In this study, computed tomograms (CTs) of 70 patients were examined for visible vascular canals in the mandible as well as for their localization, incidence, diameter, and content. All patients examined showed at least 1 lingual perforating bone canal in the mandible. Since such vascular canals are encountered regularly, routine CT examination is recommended prior to implant surgery to help avoid severe bleeding complications during the placement of implants in the interforaminal region.

Local calibrated bone mineral density in the mandible presented using a color coding scheme.

Calibrated information on bone mineral density (BMD) may be used in dental implantology to measure "bone quality". It can be used to estimate the expected primary implant stability preoperatively and to guide the surgeon in selecting optimum implant types and operation techniques. Using a preoperative dental computed tomography (Dental-CT) scan, all of this information can be obtained without additional examinations and thus without additional X-ray exposure of the patient. In contrast to bone mineral determination in other body regions, local BMD values are important in the jaw bone. Therefore, a regimen where color-coded information on local bone mineralization is superimposed on Dental-CT images is proposed using the original CT volumes as well as reformatted views.

Dental CT evaluation of mandibular first premolar root configurations and canal variations.

OBJECTIVES: Routine dental CT scans were used to describe mandibular first premolar root configurations and canal variations. STUDY DESIGN: One hundred twenty dental CT examinations were evaluated for mandibular first premolar root configurations and canal variations regarding shape of root and root canal, incidence of multiple canals, and level of bifurcation. RESULTS: A total of 17 teeth in 12 patients showed mesial invagination of the root of the mandibular first premolar. One root displayed 3 canals with 3 apical foramina. In 2 teeth, a single canal divided into 2 canals, but merged into 1 apical foramen. One root showing 2 root canals finally divided into 2 roots near the apex. Thirteen roots had 2 canals and 2 apical foramina. The distance from the cementoenamel junction to the level of bifurcation was between 4 and 13 mm (mean, 7.4 mm). CONCLUSION: The occurrence of incidentally found mandibular first premolar root variations should be an important component of dental CT reports.

Cone beam CT: a current overview of devices.

The purpose of this study was to review and compare the properties of all the available cone beam CT (CBCT) devices offered on the market, while focusing especially on Europe. In this study, we included all the different commonly used CBCT devices currently available on the European market. Information about the properties of each device was obtained from the manufacturers' official available data, which was later confirmed by their representatives in cases where it was necessary. The main features of a total of 47 CBCT devices that are currently marketed by 20 companies were presented, compared and discussed in this study. All these CBCT devices differ in specific properties according to the companies that produce them. The summarized technical data from a large number of CBCT devices currently on the market offer a wide range of imaging possibilities in the oral and maxillofacial region.

Root canal system in the mesiobuccal root of the maxillary first molar: an in vitro comparison study of computed tomography and histology.

OBJECTIVES: The purpose of this study was to investigate a new diagnostic approach to the examination of the canal configuration of the mesiobuccal root of the maxillary first molar. MATERIALS AND METHODS: High-resolution computed tomography (CT) was compared with histology in vitro. There were 152 teeth investigated and classified according to Weine and Vertucci. RESULTS: CT describes the exact canal configuration, verifying information identical to histology, and thus serving as the "gold standard" in vitro. With regard to canal position, 9 (5.92%) of the teeth examined were Vertucci type 1, 48 (31.58%) were Vertucci type 2, 91 (59.87%) were Vertucci type 4, 1 (0.66%) was Vertucci type 5, 1 (0.66%) was Vertucci type 6. Of the 152 teeth examined, 3 (1.97%) could not be classified using Weine, 2 (1.31%) could not be classified according to either Weine or Vertucci, and no Vertucci types 3, 7 or 8 were identified. CONCLUSIONS: CT offers complete information on the number and configuration of root canals. As the root canal configuration of the adult does not change rapidly, CT investigations can be used for multiple subsequent treatments.

[Dental CT in the planning of surgical procedures. Its significance in the oro-maxillofacial region from the viewpoint of the dentist]. / Dental-CT zur Planung chirurgischer Eingriffe. Bedeutung im oro-maxillofazialen Bereich aus zahnärztlicher Sicht.

Dental computer assisted tomography (Dental CT) represents a valuable addition to the diagnostic spectrum for planning oral and maxillofacial surgery. High resolution CT and specially designed computer software allow representation of the jaws in different planes that are easy to match. They further allow the display of very small structures relevant to oral surgical interventions and reveal their spatial relationship in three dimensions. Thus communication between dentists and radiologists may be intensified and supported by usage of modern telecommunication systems. Dental CT is indicated, when clinical and conventional radiological techniques will not allow exact interpretation of the situation. It is modern oral implantology that primarily benefits from computer software enabling the assessment of surgical sites in the presurgical phase. Such planning was not yet possible using two dimensional radiographic techniques. The dental-implantological part expects from radiography sharply defined contours of the external bony contours and the mandibular canal, exactly defined relation between slices and planes, no distortion in the orthoradial planes, tools for reliable measurements of distances, angles and volumes, possibility to transmit pictures electronically or on hardcopy without loss of quality.

[Conventional dental radiography and future prospectives]. / Konventionelle Dentalradiologie und Zukunftsperspektiven.

Until recently, conventional dental radiology was performed by dentists and orofacial surgeons. Due to the rapid development of radiological technique, the demand of radiological advice is increasing. The radiologists see more and more dental patients in their daily routine. The aim of this article is to give an overview on established dental radiology and a glimpse into the future. Conventional dental radiology and digital radiography are presently in use. Intraoral technique comprises dental films, bite-wing views and occlusal radiographs. Panoramic views and cephalometric radiographs are done with extraoral technique. Digital radiography lacks all processes in behalf of film development. It leads to dose reduction and enables image manipulation.

Atypical appearance of elastofibroma dorsi on MRI: case reports and review of the literature.

Three patients with histologically proven elastofibroma dorsi underwent MRI, using T1-weighted, T2-weighted, STIR (short inversion time inversion recovery), and contrast-enhanced SE sequences. All lesions typically displayed low signal intensity masses interspersed with areas of high signal intensity on T1- and T2-weighted SE images. Contrary to prior reports, two patients showed marked enhancement of the mass after administration of Gd-DTPA. Although the characteristic signal intensity on conventional T1- and T2-weighted images may lead to the early diagnosis of this rare tumor, radiologists should be aware that marked contrast enhancement may be representative in elastofibroma dorsi.

Alternative to the median region of the palate for placement of an orthodontic implant.

Tooth-borne anchorage may be one of the greatest limitations of modern orthodontic treatment, because teeth move in response to forces. Previous investigators have placed temporary implants in the median-sagittal palate in order to establish maximum anchorage. This area, however, may be characterized by relatively low vertical bone support. The aim of this study was therefore to find an alternative palatal implant site which offers a higher amount of bone support. This study comprised 22 patients wishing for maximum anchorage underwent presurgical diagnostic evaluation by means of low-dose dental CT. The measuring results regarding vertical bone volume and the position of the neighbouring tooth roots were used as the basis for further treatment. The statistical data analysis indicated an area suitable for implant placement in the group of patients examined. This area was located 6 to 9 mm posterior to the incisive foramen and 3 to 6 mm paramedian, under avoidance of the mid-palatal suture. The patients showed such a great range of variation in vertical bone volume that a preoperative diagnostic evaluation also seems to be recommendable when very short implants are used in order to avoid perforations of the lower nasal duct.

Detection of the mandibular canal via shaded surface display and multiplanar reconstruction of CT data.

The purpose of this study was to evaluate the sensitivity of conventional two-dimensional (2D) multisection images (multiplanar rendering, MPR) and registered three-dimensional (3D) shaded surface images (shaded surface display, SSD) of standard axial computed tomography (CT) data for detecting the mandibular canal (MC) in the lower jaw of 136 patients. The patients, who had different indications for mandibular CT, were examined using standard axial CT scanning. Two post-processing programs were used for 3D visualization of the data sets. The cross-sectional rendered images and the shaded surface 3D images were graded for detection of the MC, the presence of artefacts, overall quality and clinical relevance. A 3D display of the MC was achieved using the MPR technique in 100% with high image quality. The surface rendered display depicted the MC in 80%. Artefacts markedly degraded the 3D displays obtained using the surface rendering technique; thus, SSD is an inappropriate technique for imaging the entire MC without manual segmentation. MPR-CT improves the sensitivity of CT imaging in the detection of the MC with very little time needed for post-processing compared with the SSD method. This post-processing modality should, therefore, be considered for serial studies of patients undergoing dental CT. The sensitivity of the MPR method is even superior to the standard axial CT slices.

[Coxarthrosis]. / Koxarthrose.

Osteoarthritis of the hip joint is a very common disease. There is a minor prevalence of males. By etiology one can distinguish primary (idiopathic) from secondary osteoarthritis. Secondary are due to well-known etiologies as overweight, repetitive traumata, malposture, muscle- and tendon-imbalance etc. Osteoarthritis includes not only cartilage abnormalities, but also such of the subchondral-region, synovialis, synovial fluid and periarticular muscles. The cartilage shows in osteoarthritis typically edema and swelling, defects with tears, fibrillation, and "baldness" and (or) cartilagenous repair-islands and joint space narrowing as well, while subchondrally micro-edema, necrosis, ev. microfractures, "cysts", demineralisation followed by sclerosis, osteophyte-formation and deformity is seen. With conventional radiographs and CT joint space narrowing, subchondral cysts, sclerosis and osteophytes and deformities are well delineated, MRI however allows visualization of subtle bone marrow and cartilage abnormalities. Clinically, the diagnosis of pre-osteoarthritis becomes more and more important. This includes e.g. deformities and malpostures, labrum-pathologies and structural imbalances. There are three prognostic different types of hip-osteoarthritis depending on the migration of the head of the hip joint: the most common are the latero-cranial and the medio-caudal ones, while the central one is found very rarely. Basic imaging method are conventional radiographs, and CT, followed by MRI. The diagnosis of an "activated osteoarthritis" is made by bone-scintigraphy or MRI with i.v. application of contrast-media. The labrum- and cartilage diagnosis should be done with MRI or MR-arthrography. Functional computer-animated analysis will be of great diagnostic value in the near future. MRI indications are differences between clinical results and imaging, missing clinical improvement of an "activated" osteoarthritis under standard therapy, unclear joint-pain and before any arthroscopy.